| Commit message (Expand) | Author | Age | Files | Lines |
* | spi core: ready logic low one cycle earlier | Josh Blum | 2012-03-16 | 1 | -1/+1 |
* | fifo ctrl: parameterize having a proto header | Josh Blum | 2012-03-16 | 1 | -5/+9 |
* | fifo ctrl: rename fifo ctrl module and add sid ack param | Josh Blum | 2012-03-16 | 2 | -9/+12 |
* | fifo ctrl: minor fixes for spi core, swap time define | Josh Blum | 2012-03-16 | 2 | -7/+7 |
* | fifo ctrl: simplified perfs, added spi clock idle phase | Josh Blum | 2012-03-16 | 2 | -13/+21 |
* | fifo ctrl: spi core work, fifo ctrl perifs, usrp2 support | Josh Blum | 2012-03-16 | 2 | -19/+35 |
* | spi: created simple spi core (sr based) | Josh Blum | 2012-03-16 | 2 | -0/+196 |
* | fifo ctrl: simplified result packets (no tsf or sid) | Josh Blum | 2012-03-16 | 1 | -16/+7 |
* | fifo_ctrl: switched to medfifo and separate result fifo | Josh Blum | 2012-03-16 | 1 | -90/+120 |
* | fifo_ctrl: clear settings reg, and flow control | Josh Blum | 2012-03-16 | 2 | -5/+7 |
* | fifo ctrl: added time compare for timed commands | Josh Blum | 2012-03-16 | 1 | -3/+7 |
* | srb: created command queue, in and out state machines | Josh Blum | 2012-03-16 | 1 | -95/+160 |
* | usrp2: added vrt pack/unpacker to fifo ctrl | Josh Blum | 2012-03-16 | 1 | -40/+107 |
* | usrp2: first pass implementation of fifo control | Josh Blum | 2012-03-16 | 2 | -0/+222 |
* | dsp_rework: testbench enhancements | Matt Ettus | 2012-02-02 | 1 | -11/+34 |
* | dsp_rework: more thorough test | Matt Ettus | 2012-01-31 | 1 | -8/+20 |
* | dsp: 8 to 16 bit conversion for tx side. believed to be functional | Matt Ettus | 2012-01-29 | 1 | -12/+36 |
* | dsp rework: integrated custom dsp module shells | Josh Blum | 2012-01-27 | 1 | -1/+1 |
* | dsp rework: implemented dsp changes for other top levels | Josh Blum | 2012-01-27 | 2 | -1/+65 |
* | forgot to add gpio atr to makefile source list | Josh Blum | 2011-10-26 | 1 | -0/+1 |
* | u2/u2p: use new setting_reg based gpios, gets it off of wb | Matt Ettus | 2011-10-26 | 1 | -0/+71 |
* | dsp_engine fix rst -> reset, default to read address | Matt Ettus | 2011-10-26 | 1 | -2/+2 |
* | dspengine: insert into the rx chain | Matt Ettus | 2011-10-26 | 2 | -1/+3 |
* | dsp_engine: new way of doing DSP operations on VITA packets. Example does 16... | Matt Ettus | 2011-10-26 | 3 | -0/+556 |
* | fix warning on dat_o in atr_controller16.v | Josh Blum | 2011-08-29 | 1 | -3/+2 |
* | fix typo | Matt Ettus | 2011-08-26 | 1 | -21/+21 |
* | all: tie unused ram inputs to 1 instead of zero, helps routing | Matt Ettus | 2011-08-26 | 1 | -21/+21 |
* | usrp2: reconnect frontend calibration, timing meets | Josh Blum | 2011-08-26 | 1 | -2/+2 |
* | connect unused BRAM inputs to 1s to save routing logic | Josh Blum | 2011-08-15 | 1 | -1/+1 |
* | u2: redo the atr gpio pins, remove some old cruft | Matt Ettus | 2011-07-27 | 1 | -45/+31 |
* | appease the ISE gods | Matt Ettus | 2011-07-19 | 2 | -2/+2 |
* | removed wb readback of ATR, allowing it to be synthesized as luts | Matt Ettus | 2011-07-19 | 2 | -4/+10 |
* | added copyrights | Josh Blum | 2011-06-07 | 60 | -0/+1020 |
* | u1p: fix bus widths and other warnings | Matt Ettus | 2011-05-26 | 1 | -11/+11 |
* | modernize the make files, it now compiles. not tested. | Matt Ettus | 2011-05-26 | 1 | -0/+1 |
* | select bus is 2 bits wide | Nick Foster | 2011-05-26 | 1 | -1/+1 |
* | add padding into gpif response path | Matt Ettus | 2011-05-26 | 1 | -1/+7 |
* | pad out packets to a minimum length | Matt Ettus | 2011-05-26 | 1 | -1/+10 |
* | fixed length command packets | Matt Ettus | 2011-05-26 | 1 | -1/+1 |
* | give response packets the same format as tx packets | Matt Ettus | 2011-05-26 | 1 | -1/+13 |
* | successful test | Matt Ettus | 2011-05-26 | 1 | -0/+104 |
* | old and unused | Matt Ettus | 2011-05-26 | 1 | -151/+0 |
* | fifo to wb should be functionally complete, needs testing | Matt Ettus | 2011-05-26 | 1 | -21/+141 |
* | added a loopback control port, will do full wishbone interface later | Matt Ettus | 2011-05-26 | 1 | -0/+34 |
* | N210: bootram expanded to 16KB (8 BRAMs) and UDP bootloader added | Nick Foster | 2011-04-21 | 1 | -98/+143 |
* | Merge branch 'master' into next | Matt Ettus | 2011-03-27 | 2 | -2/+2 |
|\ |
|
| * | clean up a bunch of warnings and incorrect bus widths | Matt Ettus | 2011-03-16 | 2 | -2/+2 |
* | | u2/u2p: reworked settings bus addresses | Matt Ettus | 2011-03-16 | 1 | -3/+1 |
|/ |
|
* | put these files in the right place. newfifo is long gone. | Matt Ettus | 2011-02-16 | 8 | -256/+0 |
* | usrp-e100: added missing newfifo files to list, added missing signals for timed | Josh Blum | 2011-01-26 | 1 | -0/+5 |