fpga: x400: Add support for X410 motherboard FPGA

Co-authored-by: Andrew Moch <Andrew.Moch@ni.com>
Co-authored-by: Daniel Jepson <daniel.jepson@ni.com>
Co-authored-by: Javier Valenzuela <javier.valenzuela@ni.com>
Co-authored-by: Joerg Hofrichter <joerg.hofrichter@ni.com>
Co-authored-by: Kumaran Subramoniam <kumaran.subramoniam@ni.com>
Co-authored-by: Max Köhler <max.koehler@ni.com>
Co-authored-by: Michael Auchter <michael.auchter@ni.com>
Co-authored-by: Paul Butler <paul.butler@ni.com>
Co-authored-by: Wade Fife <wade.fife@ettus.com>
Co-authored-by: Hector Rubio <hrubio@ni.com>

16 files changed, 1477 insertions, 0 deletions

diff --git a/fpga/usrp3/top/x400/constraints/pins/common.xdc b/fpga/usrp3/top/x400/constraints/pins/common.xdc
new file mode 100644
index 000000000..92b09575b
--- /dev/null
+++ b/fpga/usrp3/top/x400/constraints/pins/common.xdc
@@ -0,0 +1,192 @@
+#
+# Copyright 2021 Ettus Research, a National Instruments Brand
+#
+# SPDX-License-Identifier: LGPL-3.0-or-later
+#
+# Description:
+#   Common pin constraints for X410.
+#
+
+###############################################################################
+# Pin constraints for the MGTs reference clocks
+###############################################################################
+
+set_property PACKAGE_PIN U33 [get_ports {MGT_REFCLK_LMK0_P}]
+set_property PACKAGE_PIN U34 [get_ports {MGT_REFCLK_LMK0_N}]
+
+set_property PACKAGE_PIN T31 [get_ports {MGT_REFCLK_LMK1_P}]
+set_property PACKAGE_PIN T32 [get_ports {MGT_REFCLK_LMK1_N}]
+
+set_property PACKAGE_PIN W33 [get_ports {MGT_REFCLK_LMK2_P}]
+set_property PACKAGE_PIN W34 [get_ports {MGT_REFCLK_LMK2_N}]
+
+set_property PACKAGE_PIN V31 [get_ports {MGT_REFCLK_LMK3_P}]
+set_property PACKAGE_PIN V32 [get_ports {MGT_REFCLK_LMK3_N}]
+
+
+###############################################################################
+# Common pin constraints for the QSFP28 ports
+###############################################################################
+
+set_property PACKAGE_PIN AJ15 [get_ports {QSFP0_MODPRS_n}]
+set_property PACKAGE_PIN AH16 [get_ports {QSFP0_RESET_n}]
+set_property PACKAGE_PIN AH15 [get_ports {QSFP0_LPMODE_n}]
+
+set_property PACKAGE_PIN AL11 [get_ports {QSFP1_MODPRS_n}]
+set_property PACKAGE_PIN AR8  [get_ports {QSFP1_RESET_n}]
+set_property PACKAGE_PIN AT9  [get_ports {QSFP1_LPMODE_n}]
+
+set_property IOSTANDARD LVCMOS12 [get_ports {QSFP*_MODPRS_n QSFP*_RESET_n QSFP*_LPMODE_n}]
+set_property SLEW       SLOW     [get_ports {QSFP*_RESET_n QSFP*_LPMODE_n}]
+
+
+###############################################################################
+# eCPRI future clocks
+###############################################################################
+
+# Input
+set_property PACKAGE_PIN AK17 [get_ports {FPGA_AUX_REF}]
+set_property IOSTANDARD LVCMOS12 [get_ports {FPGA_AUX_REF}]
+
+# Output
+set_property PACKAGE_PIN AG17 [get_ports {FABRIC_CLK_OUT_P}]
+set_property PACKAGE_PIN AH17 [get_ports {FABRIC_CLK_OUT_N}]
+set_property IOSTANDARD DIFF_SSTL12 [get_ports {FABRIC_CLK_OUT_*}]
+
+# GTY_RCV_CLK_P is defined in qsfp_port1
+
+
+###############################################################################
+# Pin constraints for the other PL pins (1.8 V)
+###############################################################################
+
+set_property PACKAGE_PIN F6  [get_ports {DB1_GPIO[0]}]
+set_property PACKAGE_PIN E6  [get_ports {DB1_GPIO[1]}]
+set_property PACKAGE_PIN E9  [get_ports {DB1_GPIO[2]}]
+set_property PACKAGE_PIN E8  [get_ports {DB1_GPIO[3]}]
+set_property PACKAGE_PIN E7  [get_ports {DB1_GPIO[4]}]
+set_property PACKAGE_PIN D6  [get_ports {DB1_GPIO[5]}]
+set_property PACKAGE_PIN D10 [get_ports {DB1_GPIO[6]}]
+set_property PACKAGE_PIN C10 [get_ports {DB1_GPIO[7]}]
+set_property PACKAGE_PIN C8  [get_ports {DB1_GPIO[8]}]
+set_property PACKAGE_PIN C7  [get_ports {DB1_GPIO[9]}]
+set_property PACKAGE_PIN D9  [get_ports {DB1_GPIO[10]}]
+set_property PACKAGE_PIN D8  [get_ports {DB1_GPIO[11]}]
+set_property PACKAGE_PIN B8  [get_ports {DB1_GPIO[12]}]
+set_property PACKAGE_PIN B7  [get_ports {DB1_GPIO[13]}]
+set_property PACKAGE_PIN B10 [get_ports {DB1_GPIO[14]}]
+set_property PACKAGE_PIN B9  [get_ports {DB1_GPIO[15]}]
+set_property PACKAGE_PIN C6  [get_ports {DB1_GPIO[16]}]
+set_property PACKAGE_PIN C5  [get_ports {DB1_GPIO[17]}]
+set_property PACKAGE_PIN B5  [get_ports {DB1_GPIO[18]}]
+set_property PACKAGE_PIN A5  [get_ports {DB1_GPIO[19]}]
+set_property IOSTANDARD LVCMOS18 [get_ports {DB1_GPIO[*]}]
+set_property PULLDOWN   TRUE     [get_ports {DB1_GPIO[*]}]
+set_property IOB        TRUE     [get_ports {DB1_GPIO[*]}]
+
+set_property PACKAGE_PIN A7 [get_ports {DB1_SYNTH_SYNC}]
+set_property IOSTANDARD LVCMOS18 [get_ports {DB1_SYNTH_SYNC}]
+
+set_property PACKAGE_PIN AW6 [get_ports {DB0_GPIO[0]}]
+set_property PACKAGE_PIN AW5 [get_ports {DB0_GPIO[1]}]
+set_property PACKAGE_PIN AW4 [get_ports {DB0_GPIO[2]}]
+set_property PACKAGE_PIN AW3 [get_ports {DB0_GPIO[3]}]
+set_property PACKAGE_PIN AV3 [get_ports {DB0_GPIO[4]}]
+set_property PACKAGE_PIN AV2 [get_ports {DB0_GPIO[5]}]
+set_property PACKAGE_PIN AU2 [get_ports {DB0_GPIO[6]}]
+set_property PACKAGE_PIN AU1 [get_ports {DB0_GPIO[7]}]
+set_property PACKAGE_PIN AV6 [get_ports {DB0_GPIO[8]}]
+set_property PACKAGE_PIN AV5 [get_ports {DB0_GPIO[9]}]
+set_property PACKAGE_PIN AU4 [get_ports {DB0_GPIO[10]}]
+set_property PACKAGE_PIN AU3 [get_ports {DB0_GPIO[11]}]
+set_property PACKAGE_PIN AT5 [get_ports {DB0_GPIO[12]}]
+set_property PACKAGE_PIN AU5 [get_ports {DB0_GPIO[13]}]
+set_property PACKAGE_PIN AT7 [get_ports {DB0_GPIO[14]}]
+set_property PACKAGE_PIN AT6 [get_ports {DB0_GPIO[15]}]
+set_property PACKAGE_PIN AU8 [get_ports {DB0_GPIO[16]}]
+set_property PACKAGE_PIN AV8 [get_ports {DB0_GPIO[17]}]
+set_property PACKAGE_PIN AU7 [get_ports {DB0_GPIO[18]}]
+set_property PACKAGE_PIN AV7 [get_ports {DB0_GPIO[19]}]
+set_property IOSTANDARD LVCMOS18 [get_ports {DB0_GPIO[*]}]
+set_property PULLDOWN   TRUE     [get_ports {DB0_GPIO[*]}]
+set_property IOB        TRUE     [get_ports {DB0_GPIO[*]}]
+
+set_property PACKAGE_PIN AP5 [get_ports {DB0_SYNTH_SYNC}]
+set_property IOSTANDARD LVCMOS18 [get_ports {DB0_SYNTH_SYNC}]
+
+set_property PACKAGE_PIN A9   [get_ports {LMK_SYNC}]
+set_property IOB         TRUE [get_ports {LMK_SYNC}]
+
+set_property PACKAGE_PIN A10 [get_ports {TRIG_IO}]
+set_property PACKAGE_PIN A6  [get_ports {PPS_IN}]
+set_property PACKAGE_PIN AR7 [get_ports {PL_CPLD_SCLK}]
+set_property PACKAGE_PIN AR6 [get_ports {PL_CPLD_MOSI}]
+set_property PACKAGE_PIN AP6 [get_ports {PL_CPLD_MISO}]
+set_property IOSTANDARD LVCMOS18 [get_ports {LMK_SYNC TRIG_IO PPS_IN PL_CPLD_SCLK PL_CPLD_MOSI PL_CPLD_MISO}]
+set_property DRIVE      16       [get_ports {PL_CPLD_SCLK}]
+
+
+###############################################################################
+# Pin constraints for the other PL pins (1.2 V)
+###############################################################################
+
+set_property PACKAGE_PIN AL16 [get_ports {PLL_REFCLK_FPGA_P}]
+set_property PACKAGE_PIN AL15 [get_ports {PLL_REFCLK_FPGA_N}]
+set_property IOSTANDARD DIFF_SSTL12 [get_ports {PLL_REFCLK_FPGA_*}]
+
+set_property PACKAGE_PIN G17  [get_ports {BASE_REFCLK_FPGA_P}]
+set_property PACKAGE_PIN F17  [get_ports {BASE_REFCLK_FPGA_N}]
+set_property IOSTANDARD DIFF_SSTL12 [get_ports {BASE_REFCLK_FPGA_*}]
+
+set_property PACKAGE_PIN AF17 [get_ports {SYSREF_FABRIC_P}]
+set_property PACKAGE_PIN AF16 [get_ports {SYSREF_FABRIC_N}]
+set_property IOSTANDARD DIFF_SSTL12 [get_ports {SYSREF_FABRIC_*}]
+
+set_property PACKAGE_PIN J15  [get_ports {DIOA_FPGA[0]}]
+set_property PACKAGE_PIN H15  [get_ports {DIOA_FPGA[1]}]
+set_property PACKAGE_PIN L17  [get_ports {DIOA_FPGA[2]}]
+set_property PACKAGE_PIN K17  [get_ports {DIOA_FPGA[3]}]
+set_property PACKAGE_PIN K16  [get_ports {DIOA_FPGA[4]}]
+set_property PACKAGE_PIN J16  [get_ports {DIOA_FPGA[5]}]
+set_property PACKAGE_PIN K19  [get_ports {DIOA_FPGA[6]}]
+set_property PACKAGE_PIN K18  [get_ports {DIOA_FPGA[7]}]
+set_property PACKAGE_PIN H17  [get_ports {DIOA_FPGA[8]}]
+set_property PACKAGE_PIN H16  [get_ports {DIOA_FPGA[9]}]
+set_property PACKAGE_PIN J19  [get_ports {DIOA_FPGA[10]}]
+set_property PACKAGE_PIN J18  [get_ports {DIOA_FPGA[11]}]
+set_property PACKAGE_PIN M18  [get_ports {DIOB_FPGA[0]}]
+set_property PACKAGE_PIN H18  [get_ports {DIOB_FPGA[1]}]
+set_property PACKAGE_PIN G18  [get_ports {DIOB_FPGA[2]}]
+set_property PACKAGE_PIN G15  [get_ports {DIOB_FPGA[3]}]
+set_property PACKAGE_PIN F15  [get_ports {DIOB_FPGA[4]}]
+set_property PACKAGE_PIN G19  [get_ports {DIOB_FPGA[5]}]
+set_property PACKAGE_PIN F19  [get_ports {DIOB_FPGA[6]}]
+set_property PACKAGE_PIN F16  [get_ports {DIOB_FPGA[7]}]
+set_property PACKAGE_PIN E16  [get_ports {DIOB_FPGA[8]}]
+set_property PACKAGE_PIN E18  [get_ports {DIOB_FPGA[9]}]
+set_property PACKAGE_PIN E17  [get_ports {DIOB_FPGA[10]}]
+set_property PACKAGE_PIN E19  [get_ports {DIOB_FPGA[11]}]
+set_property IOSTANDARD LVCMOS12 [get_ports {DIO*_FPGA[*]}]
+set_property PULLDOWN   true     [get_ports {DIO*_FPGA[*]}]
+
+set_property PACKAGE_PIN AW13 [get_ports {PPS_LED}]
+set_property IOSTANDARD LVCMOS12 [get_ports {PPS_LED}]
+
+set_property PACKAGE_PIN B23  [get_ports {PL_CPLD_JTAGEN}]
+set_property PACKAGE_PIN N21  [get_ports {PL_CPLD_CS0_n}]
+set_property PACKAGE_PIN J24  [get_ports {PL_CPLD_CS1_n}]
+set_property PACKAGE_PIN AN12 [get_ports {CPLD_JTAG_OE_n}]
+set_property IOSTANDARD LVCMOS12 [get_ports {PL_CPLD_JTAGEN PL_CPLD_CS*_n CPLD_JTAG_OE_n}]
+
+
+###############################################################################
+# Unused pins
+###############################################################################
+
+# set_property PACKAGE_PIN D19  [get_ports {PL_CPLD_IRQ}]
+# set_property PACKAGE_PIN AF15 [get_ports {FPGA_TEST}]
+# set_property IOSTANDARD LVCMOS12 [get_ports {FPGA_TEST PL_CPLD_IRQ}]
+
+# set_property PACKAGE_PIN AK16 [get_ports {TDC_SPARE_0}]
+# set_property PACKAGE_PIN AJ16 [get_ports {TDC_SPARE_1}]
+# set_property IOSTANDARD LVCMOS12 [get_ports {TDC_SPARE_*}]
diff --git a/fpga/usrp3/top/x400/constraints/pins/dram.xdc b/fpga/usrp3/top/x400/constraints/pins/dram.xdc
new file mode 100644
index 000000000..d4e412239
--- /dev/null
+++ b/fpga/usrp3/top/x400/constraints/pins/dram.xdc
@@ -0,0 +1,344 @@
+#
+# Copyright 2021 Ettus Research, a National Instruments Brand
+#
+# SPDX-License-Identifier: LGPL-3.0-or-later
+#
+# Description:
+#   DRAM pin constraints for X410.
+#
+
+###############################################################################
+# Pin constraints for DRAM controller 0
+###############################################################################
+
+set_property PACKAGE_PIN AH20 [get_ports DRAM0_ACT_n]
+set_property PACKAGE_PIN AN22 [get_ports {DRAM0_ADDR[0]}]
+set_property PACKAGE_PIN AJ18 [get_ports {DRAM0_ADDR[10]}]
+set_property PACKAGE_PIN AN21 [get_ports {DRAM0_ADDR[11]}]
+set_property PACKAGE_PIN AF20 [get_ports {DRAM0_ADDR[12]}]
+set_property PACKAGE_PIN AJ20 [get_ports {DRAM0_ADDR[13]}]
+set_property PACKAGE_PIN AG18 [get_ports {DRAM0_ADDR[14]}]
+set_property PACKAGE_PIN AK18 [get_ports {DRAM0_ADDR[15]}]
+set_property PACKAGE_PIN AN18 [get_ports {DRAM0_ADDR[16]}]
+set_property PACKAGE_PIN AL20 [get_ports {DRAM0_ADDR[1]}]
+set_property PACKAGE_PIN AK22 [get_ports {DRAM0_ADDR[2]}]
+set_property PACKAGE_PIN AM19 [get_ports {DRAM0_ADDR[3]}]
+set_property PACKAGE_PIN AG20 [get_ports {DRAM0_ADDR[4]}]
+set_property PACKAGE_PIN AT20 [get_ports {DRAM0_ADDR[5]}]
+set_property PACKAGE_PIN AL19 [get_ports {DRAM0_ADDR[6]}]
+set_property PACKAGE_PIN AK21 [get_ports {DRAM0_ADDR[7]}]
+set_property PACKAGE_PIN AL21 [get_ports {DRAM0_ADDR[8]}]
+set_property PACKAGE_PIN AP21 [get_ports {DRAM0_ADDR[9]}]
+set_property PACKAGE_PIN AK19 [get_ports {DRAM0_BA[0]}]
+set_property PACKAGE_PIN AM18 [get_ports {DRAM0_BA[1]}]
+set_property PACKAGE_PIN AJ19 [get_ports {DRAM0_BG[0]}]
+set_property PACKAGE_PIN AL22 [get_ports {DRAM0_CLK_P[0]}]
+set_property PACKAGE_PIN AM22 [get_ports {DRAM0_CLK_N[0]}]
+set_property PACKAGE_PIN AF19 [get_ports {DRAM0_CKE[0]}]
+set_property PACKAGE_PIN AH18 [get_ports {DRAM0_CS_n[0]}]
+set_property PACKAGE_PIN AT17 [get_ports {DRAM0_ODT[0]}]
+set_property PACKAGE_PIN AP15 [get_ports DRAM0_RESET_n]
+set_property PACKAGE_PIN AM20 [get_ports DRAM0_REFCLK_P]
+set_property PACKAGE_PIN AN20 [get_ports DRAM0_REFCLK_N]
+set_property PACKAGE_PIN AR17 [get_ports {DRAM0_DM_n[0]}]
+set_property PACKAGE_PIN AR22 [get_ports {DRAM0_DQS_p[0]}]
+set_property PACKAGE_PIN AT22 [get_ports {DRAM0_DQS_n[0]}]
+set_property PACKAGE_PIN AR18 [get_ports {DRAM0_DQ[0]}]
+set_property PACKAGE_PIN AR19 [get_ports {DRAM0_DQ[1]}]
+set_property PACKAGE_PIN AT19 [get_ports {DRAM0_DQ[2]}]
+set_property PACKAGE_PIN AT21 [get_ports {DRAM0_DQ[3]}]
+set_property PACKAGE_PIN AP18 [get_ports {DRAM0_DQ[4]}]
+set_property PACKAGE_PIN AP19 [get_ports {DRAM0_DQ[5]}]
+set_property PACKAGE_PIN AP20 [get_ports {DRAM0_DQ[6]}]
+set_property PACKAGE_PIN AR21 [get_ports {DRAM0_DQ[7]}]
+set_property PACKAGE_PIN AM12 [get_ports {DRAM0_DM_n[1]}]
+set_property PACKAGE_PIN AM13 [get_ports {DRAM0_DQS_p[1]}]
+set_property PACKAGE_PIN AN13 [get_ports {DRAM0_DQS_n[1]}]
+set_property PACKAGE_PIN AM10 [get_ports {DRAM0_DQ[8]}]
+set_property PACKAGE_PIN AP10 [get_ports {DRAM0_DQ[9]}]
+set_property PACKAGE_PIN AN10 [get_ports {DRAM0_DQ[10]}]
+set_property PACKAGE_PIN AR11 [get_ports {DRAM0_DQ[11]}]
+set_property PACKAGE_PIN AL10 [get_ports {DRAM0_DQ[12]}]
+set_property PACKAGE_PIN AP11 [get_ports {DRAM0_DQ[13]}]
+set_property PACKAGE_PIN AN11 [get_ports {DRAM0_DQ[14]}]
+set_property PACKAGE_PIN AR12 [get_ports {DRAM0_DQ[15]}]
+set_property PACKAGE_PIN AW19 [get_ports {DRAM0_DM_n[2]}]
+set_property PACKAGE_PIN AV21 [get_ports {DRAM0_DQS_p[2]}]
+set_property PACKAGE_PIN AW21 [get_ports {DRAM0_DQS_n[2]}]
+set_property PACKAGE_PIN AV17 [get_ports {DRAM0_DQ[16]}]
+set_property PACKAGE_PIN AV18 [get_ports {DRAM0_DQ[17]}]
+set_property PACKAGE_PIN AU19 [get_ports {DRAM0_DQ[18]}]
+set_property PACKAGE_PIN AU18 [get_ports {DRAM0_DQ[19]}]
+set_property PACKAGE_PIN AU17 [get_ports {DRAM0_DQ[20]}]
+set_property PACKAGE_PIN AW20 [get_ports {DRAM0_DQ[21]}]
+set_property PACKAGE_PIN AU20 [get_ports {DRAM0_DQ[22]}]
+set_property PACKAGE_PIN AV20 [get_ports {DRAM0_DQ[23]}]
+set_property PACKAGE_PIN AV10 [get_ports {DRAM0_DM_n[3]}]
+set_property PACKAGE_PIN AT12 [get_ports {DRAM0_DQS_p[3]}]
+set_property PACKAGE_PIN AT11 [get_ports {DRAM0_DQS_n[3]}]
+set_property PACKAGE_PIN AW9  [get_ports {DRAM0_DQ[24]}]
+set_property PACKAGE_PIN AU12 [get_ports {DRAM0_DQ[25]}]
+set_property PACKAGE_PIN AU10 [get_ports {DRAM0_DQ[26]}]
+set_property PACKAGE_PIN AV12 [get_ports {DRAM0_DQ[27]}]
+set_property PACKAGE_PIN AW8  [get_ports {DRAM0_DQ[28]}]
+set_property PACKAGE_PIN AT10 [get_ports {DRAM0_DQ[29]}]
+set_property PACKAGE_PIN AV11 [get_ports {DRAM0_DQ[30]}]
+set_property PACKAGE_PIN AW11 [get_ports {DRAM0_DQ[31]}]
+set_property PACKAGE_PIN AW14 [get_ports {DRAM0_DM_n[4]}]
+set_property PACKAGE_PIN AV16 [get_ports {DRAM0_DQS_p[4]}]
+set_property PACKAGE_PIN AW16 [get_ports {DRAM0_DQS_n[4]}]
+set_property PACKAGE_PIN AU13 [get_ports {DRAM0_DQ[32]}]
+set_property PACKAGE_PIN AV15 [get_ports {DRAM0_DQ[33]}]
+set_property PACKAGE_PIN AV13 [get_ports {DRAM0_DQ[34]}]
+set_property PACKAGE_PIN AU14 [get_ports {DRAM0_DQ[35]}]
+set_property PACKAGE_PIN AU15 [get_ports {DRAM0_DQ[36]}]
+set_property PACKAGE_PIN AW15 [get_ports {DRAM0_DQ[37]}]
+set_property PACKAGE_PIN AT15 [get_ports {DRAM0_DQ[38]}]
+set_property PACKAGE_PIN AT16 [get_ports {DRAM0_DQ[39]}]
+set_property PACKAGE_PIN AP8  [get_ports {DRAM0_DM_n[5]}]
+set_property PACKAGE_PIN AN8  [get_ports {DRAM0_DQS_p[5]}]
+set_property PACKAGE_PIN AN7  [get_ports {DRAM0_DQS_n[5]}]
+set_property PACKAGE_PIN AM9  [get_ports {DRAM0_DQ[40]}]
+set_property PACKAGE_PIN AR9  [get_ports {DRAM0_DQ[41]}]
+set_property PACKAGE_PIN AL7  [get_ports {DRAM0_DQ[42]}]
+set_property PACKAGE_PIN AM8  [get_ports {DRAM0_DQ[43]}]
+set_property PACKAGE_PIN AL9  [get_ports {DRAM0_DQ[44]}]
+set_property PACKAGE_PIN AP9  [get_ports {DRAM0_DQ[45]}]
+set_property PACKAGE_PIN AL8  [get_ports {DRAM0_DQ[46]}]
+set_property PACKAGE_PIN AM7  [get_ports {DRAM0_DQ[47]}]
+set_property PACKAGE_PIN AK13 [get_ports {DRAM0_DM_n[6]}]
+set_property PACKAGE_PIN AJ14 [get_ports {DRAM0_DQS_p[6]}]
+set_property PACKAGE_PIN AK14 [get_ports {DRAM0_DQS_n[6]}]
+set_property PACKAGE_PIN AH12 [get_ports {DRAM0_DQ[48]}]
+set_property PACKAGE_PIN AJ13 [get_ports {DRAM0_DQ[49]}]
+set_property PACKAGE_PIN AJ12 [get_ports {DRAM0_DQ[50]}]
+set_property PACKAGE_PIN AK12 [get_ports {DRAM0_DQ[51]}]
+set_property PACKAGE_PIN AG12 [get_ports {DRAM0_DQ[52]}]
+set_property PACKAGE_PIN AL14 [get_ports {DRAM0_DQ[53]}]
+set_property PACKAGE_PIN AH13 [get_ports {DRAM0_DQ[54]}]
+set_property PACKAGE_PIN AM14 [get_ports {DRAM0_DQ[55]}]
+set_property PACKAGE_PIN AP13 [get_ports {DRAM0_DM_n[7]}]
+set_property PACKAGE_PIN AN17 [get_ports {DRAM0_DQS_p[7]}]
+set_property PACKAGE_PIN AN16 [get_ports {DRAM0_DQS_n[7]}]
+set_property PACKAGE_PIN AM15 [get_ports {DRAM0_DQ[56]}]
+set_property PACKAGE_PIN AP14 [get_ports {DRAM0_DQ[57]}]
+set_property PACKAGE_PIN AM17 [get_ports {DRAM0_DQ[58]}]
+set_property PACKAGE_PIN AP16 [get_ports {DRAM0_DQ[59]}]
+set_property PACKAGE_PIN AL17 [get_ports {DRAM0_DQ[60]}]
+set_property PACKAGE_PIN AR14 [get_ports {DRAM0_DQ[61]}]
+set_property PACKAGE_PIN AN15 [get_ports {DRAM0_DQ[62]}]
+set_property PACKAGE_PIN AR16 [get_ports {DRAM0_DQ[63]}]
+
+
+set_property IOSTANDARD DIFF_POD12_DCI  [get_ports {DRAM0_DQS_*[*]}]
+set_property IOSTANDARD DIFF_SSTL12     [get_ports {DRAM0_REFCLK_*}]
+set_property IOSTANDARD DIFF_SSTL12_DCI [get_ports {DRAM0_CLK_*[0]}]
+set_property IOSTANDARD LVCMOS12        [get_ports  DRAM0_RESET_n]
+set_property IOSTANDARD POD12_DCI       [get_ports {DRAM0_DM_n[*] \
+                                                    DRAM0_DQ[*]}]
+set_property IOSTANDARD SSTL12_DCI      [get_ports {DRAM0_ACT_n \
+                                                    DRAM0_ADDR[*] \
+                                                    DRAM0_BA[*] \
+                                                    DRAM0_BG[0] \
+                                                    DRAM0_CKE[0] \
+                                                    DRAM0_CS_n[0] \
+                                                    DRAM0_ODT[0]}]
+
+set_property DRIVE      8                [get_ports DRAM0_RESET_n]
+
+set_property SLEW FAST [get_ports {DRAM0_ACT_n \
+                                   DRAM0_ADDR[*] \
+                                   DRAM0_BA[*] \
+                                   DRAM0_BG[0] \
+                                   DRAM0_CLK_*[0] \
+                                   DRAM0_CKE[0] \
+                                   DRAM0_CS_n[0] \
+                                   DRAM0_DM_n[*] \
+                                   DRAM0_DQ[*] \
+                                   DRAM0_DQS_*[*] \
+                                   DRAM0_ODT[0]}]
+
+set_property OUTPUT_IMPEDANCE RDRV_40_40 [get_ports {DRAM0_ACT_n \
+                                                     DRAM0_ADDR[*] \
+                                                     DRAM0_BA[*] \
+                                                     DRAM0_BG[0] \
+                                                     DRAM0_CLK_*[0] \
+                                                     DRAM0_CKE[0] \
+                                                     DRAM0_CS_n[0] \
+                                                     DRAM0_DM_n[*] \
+                                                     DRAM0_DQ[*] \
+                                                     DRAM0_DQS_*[*] \
+                                                     DRAM0_ODT[0]}]
+
+set_property IBUF_LOW_PWR FALSE [get_ports {DRAM0_DM_n[*] \
+                                            DRAM0_DQ[*] \
+                                            DRAM0_DQS_*[*]}]
+
+
+
+###############################################################################
+# Pin constraints for DRAM controller 0
+###############################################################################
+
+set_property PACKAGE_PIN E14 [get_ports DRAM1_ACT_n]
+set_property PACKAGE_PIN B12 [get_ports {DRAM1_ADDR[0]}]
+set_property PACKAGE_PIN G14 [get_ports {DRAM1_ADDR[1]}]
+set_property PACKAGE_PIN D13 [get_ports {DRAM1_ADDR[2]}]
+set_property PACKAGE_PIN F12 [get_ports {DRAM1_ADDR[3]}]
+set_property PACKAGE_PIN C13 [get_ports {DRAM1_ADDR[4]}]
+set_property PACKAGE_PIN D14 [get_ports {DRAM1_ADDR[5]}]
+set_property PACKAGE_PIN C12 [get_ports {DRAM1_ADDR[6]}]
+set_property PACKAGE_PIN C15 [get_ports {DRAM1_ADDR[7]}]
+set_property PACKAGE_PIN H12 [get_ports {DRAM1_ADDR[8]}]
+set_property PACKAGE_PIN H13 [get_ports {DRAM1_ADDR[9]}]
+set_property PACKAGE_PIN A14 [get_ports {DRAM1_ADDR[10]}]
+set_property PACKAGE_PIN K12 [get_ports {DRAM1_ADDR[11]}]
+set_property PACKAGE_PIN D11 [get_ports {DRAM1_ADDR[12]}]
+set_property PACKAGE_PIN J7  [get_ports {DRAM1_ADDR[13]}]
+set_property PACKAGE_PIN A15 [get_ports {DRAM1_ADDR[14]}]
+set_property PACKAGE_PIN B14 [get_ports {DRAM1_ADDR[15]}]
+set_property PACKAGE_PIN E11 [get_ports {DRAM1_ADDR[16]}]
+set_property PACKAGE_PIN A12 [get_ports {DRAM1_BA[0]}]
+set_property PACKAGE_PIN A11 [get_ports {DRAM1_BA[1]}]
+set_property PACKAGE_PIN B13 [get_ports {DRAM1_BG[0]}]
+set_property PACKAGE_PIN E13 [get_ports {DRAM1_CLK_P[0]}]
+set_property PACKAGE_PIN E12 [get_ports {DRAM1_CLK_N[0]}]
+set_property PACKAGE_PIN C11 [get_ports {DRAM1_CKE[0]}]
+set_property PACKAGE_PIN F14 [get_ports {DRAM1_CS_n[0]}]
+set_property PACKAGE_PIN B15 [get_ports {DRAM1_ODT[0]}]
+set_property PACKAGE_PIN G24 [get_ports DRAM1_RESET_n]
+set_property PACKAGE_PIN G13 [get_ports DRAM1_REFCLK_P]
+set_property PACKAGE_PIN G12 [get_ports DRAM1_REFCLK_N]
+set_property PACKAGE_PIN J8  [get_ports {DRAM1_DM_n[0]}]
+set_property PACKAGE_PIN H8  [get_ports {DRAM1_DQS_p[0]}]
+set_property PACKAGE_PIN G8  [get_ports {DRAM1_DQS_n[0]}]
+set_property PACKAGE_PIN G9  [get_ports {DRAM1_DQ[0]}]
+set_property PACKAGE_PIN J9  [get_ports {DRAM1_DQ[1]}]
+set_property PACKAGE_PIN H7  [get_ports {DRAM1_DQ[2]}]
+set_property PACKAGE_PIN H6  [get_ports {DRAM1_DQ[3]}]
+set_property PACKAGE_PIN G7  [get_ports {DRAM1_DQ[4]}]
+set_property PACKAGE_PIN G6  [get_ports {DRAM1_DQ[5]}]
+set_property PACKAGE_PIN F9  [get_ports {DRAM1_DQ[6]}]
+set_property PACKAGE_PIN K9  [get_ports {DRAM1_DQ[7]}]
+set_property PACKAGE_PIN K13 [get_ports {DRAM1_DM_n[1]}]
+set_property PACKAGE_PIN J14 [get_ports {DRAM1_DQS_p[1]}]
+set_property PACKAGE_PIN J13 [get_ports {DRAM1_DQS_n[1]}]
+set_property PACKAGE_PIN F10 [get_ports {DRAM1_DQ[8]}]
+set_property PACKAGE_PIN K10 [get_ports {DRAM1_DQ[9]}]
+set_property PACKAGE_PIN F11 [get_ports {DRAM1_DQ[10]}]
+set_property PACKAGE_PIN H10 [get_ports {DRAM1_DQ[11]}]
+set_property PACKAGE_PIN H11 [get_ports {DRAM1_DQ[12]}]
+set_property PACKAGE_PIN J10 [get_ports {DRAM1_DQ[13]}]
+set_property PACKAGE_PIN J11 [get_ports {DRAM1_DQ[14]}]
+set_property PACKAGE_PIN K11 [get_ports {DRAM1_DQ[15]}]
+set_property PACKAGE_PIN D18 [get_ports {DRAM1_DM_n[2]}]
+set_property PACKAGE_PIN B18 [get_ports {DRAM1_DQS_p[2]}]
+set_property PACKAGE_PIN B17 [get_ports {DRAM1_DQS_n[2]}]
+set_property PACKAGE_PIN A17 [get_ports {DRAM1_DQ[16]}]
+set_property PACKAGE_PIN D15 [get_ports {DRAM1_DQ[17]}]
+set_property PACKAGE_PIN A16 [get_ports {DRAM1_DQ[18]}]
+set_property PACKAGE_PIN D16 [get_ports {DRAM1_DQ[19]}]
+set_property PACKAGE_PIN C17 [get_ports {DRAM1_DQ[20]}]
+set_property PACKAGE_PIN B19 [get_ports {DRAM1_DQ[21]}]
+set_property PACKAGE_PIN A19 [get_ports {DRAM1_DQ[22]}]
+set_property PACKAGE_PIN C16 [get_ports {DRAM1_DQ[23]}]
+set_property PACKAGE_PIN N14 [get_ports {DRAM1_DM_n[3]}]
+set_property PACKAGE_PIN L15 [get_ports {DRAM1_DQS_p[3]}]
+set_property PACKAGE_PIN L14 [get_ports {DRAM1_DQS_n[3]}]
+set_property PACKAGE_PIN N15 [get_ports {DRAM1_DQ[24]}]
+set_property PACKAGE_PIN M12 [get_ports {DRAM1_DQ[25]}]
+set_property PACKAGE_PIN M15 [get_ports {DRAM1_DQ[26]}]
+set_property PACKAGE_PIN M13 [get_ports {DRAM1_DQ[27]}]
+set_property PACKAGE_PIN N17 [get_ports {DRAM1_DQ[28]}]
+set_property PACKAGE_PIN L12 [get_ports {DRAM1_DQ[29]}]
+set_property PACKAGE_PIN M17 [get_ports {DRAM1_DQ[30]}]
+set_property PACKAGE_PIN N13 [get_ports {DRAM1_DQ[31]}]
+set_property PACKAGE_PIN C23 [get_ports {DRAM1_DM_n[4]}]
+set_property PACKAGE_PIN B22 [get_ports {DRAM1_DQS_p[4]}]
+set_property PACKAGE_PIN A22 [get_ports {DRAM1_DQS_n[4]}]
+set_property PACKAGE_PIN B24 [get_ports {DRAM1_DQ[32]}]
+set_property PACKAGE_PIN C21 [get_ports {DRAM1_DQ[33]}]
+set_property PACKAGE_PIN C22 [get_ports {DRAM1_DQ[34]}]
+set_property PACKAGE_PIN A21 [get_ports {DRAM1_DQ[35]}]
+set_property PACKAGE_PIN A24 [get_ports {DRAM1_DQ[36]}]
+set_property PACKAGE_PIN B20 [get_ports {DRAM1_DQ[37]}]
+set_property PACKAGE_PIN C20 [get_ports {DRAM1_DQ[38]}]
+set_property PACKAGE_PIN A20 [get_ports {DRAM1_DQ[39]}]
+set_property PACKAGE_PIN F21 [get_ports {DRAM1_DM_n[5]}]
+set_property PACKAGE_PIN D23 [get_ports {DRAM1_DQS_p[5]}]
+set_property PACKAGE_PIN D24 [get_ports {DRAM1_DQS_n[5]}]
+set_property PACKAGE_PIN E24 [get_ports {DRAM1_DQ[40]}]
+set_property PACKAGE_PIN E22 [get_ports {DRAM1_DQ[41]}]
+set_property PACKAGE_PIN F24 [get_ports {DRAM1_DQ[42]}]
+set_property PACKAGE_PIN E23 [get_ports {DRAM1_DQ[43]}]
+set_property PACKAGE_PIN E21 [get_ports {DRAM1_DQ[44]}]
+set_property PACKAGE_PIN D21 [get_ports {DRAM1_DQ[45]}]
+set_property PACKAGE_PIN F20 [get_ports {DRAM1_DQ[46]}]
+set_property PACKAGE_PIN G20 [get_ports {DRAM1_DQ[47]}]
+set_property PACKAGE_PIN J23 [get_ports {DRAM1_DM_n[6]}]
+set_property PACKAGE_PIN J20 [get_ports {DRAM1_DQS_p[6]}]
+set_property PACKAGE_PIN H20 [get_ports {DRAM1_DQS_n[6]}]
+set_property PACKAGE_PIN L24 [get_ports {DRAM1_DQ[48]}]
+set_property PACKAGE_PIN H23 [get_ports {DRAM1_DQ[49]}]
+set_property PACKAGE_PIN J21 [get_ports {DRAM1_DQ[50]}]
+set_property PACKAGE_PIN H22 [get_ports {DRAM1_DQ[51]}]
+set_property PACKAGE_PIN K24 [get_ports {DRAM1_DQ[52]}]
+set_property PACKAGE_PIN G23 [get_ports {DRAM1_DQ[53]}]
+set_property PACKAGE_PIN H21 [get_ports {DRAM1_DQ[54]}]
+set_property PACKAGE_PIN G22 [get_ports {DRAM1_DQ[55]}]
+set_property PACKAGE_PIN N20 [get_ports {DRAM1_DM_n[7]}]
+set_property PACKAGE_PIN K21 [get_ports {DRAM1_DQS_p[7]}]
+set_property PACKAGE_PIN K22 [get_ports {DRAM1_DQS_n[7]}]
+set_property PACKAGE_PIN M19 [get_ports {DRAM1_DQ[56]}]
+set_property PACKAGE_PIN L21 [get_ports {DRAM1_DQ[57]}]
+set_property PACKAGE_PIN M20 [get_ports {DRAM1_DQ[58]}]
+set_property PACKAGE_PIN L23 [get_ports {DRAM1_DQ[59]}]
+set_property PACKAGE_PIN N19 [get_ports {DRAM1_DQ[60]}]
+set_property PACKAGE_PIN L22 [get_ports {DRAM1_DQ[61]}]
+set_property PACKAGE_PIN L20 [get_ports {DRAM1_DQ[62]}]
+set_property PACKAGE_PIN L19 [get_ports {DRAM1_DQ[63]}]
+
+
+set_property IOSTANDARD DIFF_POD12_DCI  [get_ports {DRAM1_DQS_*[*]}]
+set_property IOSTANDARD DIFF_SSTL12     [get_ports {DRAM1_REFCLK_*}]
+set_property IOSTANDARD DIFF_SSTL12_DCI [get_ports {DRAM1_CLK_*[0]}]
+set_property IOSTANDARD LVCMOS12        [get_ports  DRAM1_RESET_n]
+set_property IOSTANDARD POD12_DCI       [get_ports {DRAM1_DM_n[*] \
+                                                    DRAM1_DQ[*]}]
+set_property IOSTANDARD SSTL12_DCI      [get_ports {DRAM1_ACT_n \
+                                                    DRAM1_ADDR[*] \
+                                                    DRAM1_BA[*] \
+                                                    DRAM1_BG[0] \
+                                                    DRAM1_CKE[0] \
+                                                    DRAM1_CS_n[0] \
+                                                    DRAM1_ODT[0]}]
+
+set_property DRIVE      8                [get_ports DRAM1_RESET_n]
+
+set_property SLEW FAST [get_ports {DRAM1_ACT_n \
+                                   DRAM1_ADDR[*] \
+                                   DRAM1_BA[*] \
+                                   DRAM1_BG[0] \
+                                   DRAM1_CLK_*[0] \
+                                   DRAM1_CKE[0] \
+                                   DRAM1_CS_n[0] \
+                                   DRAM1_DM_n[*] \
+                                   DRAM1_DQ[*] \
+                                   DRAM1_DQS_*[*] \
+                                   DRAM1_ODT[0]}]
+
+set_property OUTPUT_IMPEDANCE RDRV_40_40 [get_ports {DRAM1_ACT_n \
+                                                     DRAM1_ADDR[*] \
+                                                     DRAM1_BA[*] \
+                                                     DRAM1_BG[0] \
+                                                     DRAM1_CLK_*[0] \
+                                                     DRAM1_CKE[0] \
+                                                     DRAM1_CS_n[0] \
+                                                     DRAM1_DM_n[*] \
+                                                     DRAM1_DQ[*] \
+                                                     DRAM1_DQS_*[*] \
+                                                     DRAM1_ODT[0]}]
+
+set_property IBUF_LOW_PWR FALSE [get_ports {DRAM1_DM_n[*] \
+                                            DRAM1_DQ[*] \
+                                            DRAM1_DQS_*[*]}]
diff --git a/fpga/usrp3/top/x400/constraints/pins/ipass.xdc b/fpga/usrp3/top/x400/constraints/pins/ipass.xdc
new file mode 100644
index 000000000..2c455e1e6
--- /dev/null
+++ b/fpga/usrp3/top/x400/constraints/pins/ipass.xdc
@@ -0,0 +1,60 @@
+#
+# Copyright 2021 Ettus Research, a National Instruments Brand
+#
+# SPDX-License-Identifier: LGPL-3.0-or-later
+#
+# Description:
+#   zHD+iPASS ports (0 and 1) pin constraints for X410.
+#
+
+###############################################################################
+# Pin constraints for the MGTs (zHD+iPASS ports)
+###############################################################################
+
+# Quad 129
+set_property PACKAGE_PIN N38 [get_ports {IPASS1_RX_P[0]}]
+set_property PACKAGE_PIN N39 [get_ports {IPASS1_RX_N[0]}]
+set_property PACKAGE_PIN M36 [get_ports {IPASS1_RX_P[1]}]
+set_property PACKAGE_PIN M37 [get_ports {IPASS1_RX_N[1]}]
+set_property PACKAGE_PIN L38 [get_ports {IPASS1_RX_P[2]}]
+set_property PACKAGE_PIN L39 [get_ports {IPASS1_RX_N[2]}]
+set_property PACKAGE_PIN K36 [get_ports {IPASS1_RX_P[3]}]
+set_property PACKAGE_PIN K37 [get_ports {IPASS1_RX_N[3]}]
+
+set_property PACKAGE_PIN P35 [get_ports {IPASS1_TX_P[0]}]
+set_property PACKAGE_PIN P36 [get_ports {IPASS1_TX_N[0]}]
+set_property PACKAGE_PIN N33 [get_ports {IPASS1_TX_P[1]}]
+set_property PACKAGE_PIN N34 [get_ports {IPASS1_TX_N[1]}]
+set_property PACKAGE_PIN L33 [get_ports {IPASS1_TX_P[2]}]
+set_property PACKAGE_PIN L34 [get_ports {IPASS1_TX_N[2]}]
+set_property PACKAGE_PIN J33 [get_ports {IPASS1_TX_P[3]}]
+set_property PACKAGE_PIN J34 [get_ports {IPASS1_TX_N[3]}]
+
+# Quad 130
+set_property PACKAGE_PIN J38 [get_ports {IPASS0_RX_P[0]}]
+set_property PACKAGE_PIN J39 [get_ports {IPASS0_RX_N[0]}]
+set_property PACKAGE_PIN H36 [get_ports {IPASS0_RX_P[1]}]
+set_property PACKAGE_PIN H37 [get_ports {IPASS0_RX_N[1]}]
+set_property PACKAGE_PIN G38 [get_ports {IPASS0_RX_P[2]}]
+set_property PACKAGE_PIN G39 [get_ports {IPASS0_RX_N[2]}]
+set_property PACKAGE_PIN F36 [get_ports {IPASS0_RX_P[3]}]
+set_property PACKAGE_PIN F37 [get_ports {IPASS0_RX_N[3]}]
+
+set_property PACKAGE_PIN H31 [get_ports {IPASS0_TX_P[0]}]
+set_property PACKAGE_PIN H32 [get_ports {IPASS0_TX_N[0]}]
+set_property PACKAGE_PIN G33 [get_ports {IPASS0_TX_P[1]}]
+set_property PACKAGE_PIN G34 [get_ports {IPASS0_TX_N[1]}]
+set_property PACKAGE_PIN F31 [get_ports {IPASS0_TX_P[2]}]
+set_property PACKAGE_PIN F32 [get_ports {IPASS0_TX_N[2]}]
+set_property PACKAGE_PIN E33 [get_ports {IPASS0_TX_P[3]}]
+set_property PACKAGE_PIN E34 [get_ports {IPASS0_TX_N[3]}]
+
+
+###############################################################################
+# Pin constraints for PCIe-related signals
+###############################################################################
+set_property PACKAGE_PIN F22  [get_ports {IPASS_SIDEBAND[0]}]
+set_property PACKAGE_PIN D20  [get_ports {IPASS_SIDEBAND[1]}]
+set_property PACKAGE_PIN AG14 [get_ports {PCIE_RESET}]
+
+set_property IOSTANDARD  LVCMOS12 [get_ports {IPASS_SIDEBAND[*] PCIE_RESET}]
diff --git a/fpga/usrp3/top/x400/constraints/pins/qsfp0_0.xdc b/fpga/usrp3/top/x400/constraints/pins/qsfp0_0.xdc
new file mode 100644
index 000000000..a285d1b63
--- /dev/null
+++ b/fpga/usrp3/top/x400/constraints/pins/qsfp0_0.xdc
@@ -0,0 +1,21 @@
+#
+# Copyright 2021 Ettus Research, a National Instruments Brand
+#
+# SPDX-License-Identifier: LGPL-3.0-or-later
+#
+# Description:
+#   QSFP28 Port 0 (Lane 0) pin constraints for X410.
+#
+
+###############################################################################
+# Pin constraints for the MGTs (QSFP28 ports)
+###############################################################################
+
+# Bank 131 (Quad X0Y4, Lanes X0Y16-X0Y19)
+# Lane 0 (X0Y16)
+
+set_property PACKAGE_PIN E38  [get_ports {QSFP0_0_RX_P}]
+set_property PACKAGE_PIN E39  [get_ports {QSFP0_0_RX_N}]
+
+set_property PACKAGE_PIN D31  [get_ports {QSFP0_0_TX_P}]
+set_property PACKAGE_PIN D32  [get_ports {QSFP0_0_TX_N}]
diff --git a/fpga/usrp3/top/x400/constraints/pins/qsfp0_1.xdc b/fpga/usrp3/top/x400/constraints/pins/qsfp0_1.xdc
new file mode 100644
index 000000000..38f376f50
--- /dev/null
+++ b/fpga/usrp3/top/x400/constraints/pins/qsfp0_1.xdc
@@ -0,0 +1,21 @@
+#
+# Copyright 2021 Ettus Research, a National Instruments Brand
+#
+# SPDX-License-Identifier: LGPL-3.0-or-later
+#
+# Description:
+#   QSFP28 Port 0 (Lane 1) pin constraints for X410.
+#
+
+###############################################################################
+# Pin constraints for the MGTs (QSFP28 ports)
+###############################################################################
+
+# Bank 131 (Quad X0Y4, Lanes X0Y16-X0Y19)
+# Lane 1 (X0Y17)
+
+set_property PACKAGE_PIN D36  [get_ports {QSFP0_1_RX_P}]
+set_property PACKAGE_PIN D37  [get_ports {QSFP0_1_RX_N}]
+
+set_property PACKAGE_PIN C33  [get_ports {QSFP0_1_TX_P}]
+set_property PACKAGE_PIN C34  [get_ports {QSFP0_1_TX_N}]
diff --git a/fpga/usrp3/top/x400/constraints/pins/qsfp0_2.xdc b/fpga/usrp3/top/x400/constraints/pins/qsfp0_2.xdc
new file mode 100644
index 000000000..8344b4cb6
--- /dev/null
+++ b/fpga/usrp3/top/x400/constraints/pins/qsfp0_2.xdc
@@ -0,0 +1,21 @@
+#
+# Copyright 2021 Ettus Research, a National Instruments Brand
+#
+# SPDX-License-Identifier: LGPL-3.0-or-later
+#
+# Description:
+#   QSFP28 Port 0 (Lane 2) pin constraints for X410.
+#
+
+###############################################################################
+# Pin constraints for the MGTs (QSFP28 ports)
+###############################################################################
+
+# Bank 131 (Quad X0Y4, Lanes X0Y16-X0Y19)
+# Lane 2 (X0Y18)
+
+set_property PACKAGE_PIN C38  [get_ports {QSFP0_2_RX_P}]
+set_property PACKAGE_PIN C39  [get_ports {QSFP0_2_RX_N}]
+
+set_property PACKAGE_PIN B31  [get_ports {QSFP0_2_TX_P}]
+set_property PACKAGE_PIN B32  [get_ports {QSFP0_2_TX_N}]
diff --git a/fpga/usrp3/top/x400/constraints/pins/qsfp0_3.xdc b/fpga/usrp3/top/x400/constraints/pins/qsfp0_3.xdc
new file mode 100644
index 000000000..2d1823988
--- /dev/null
+++ b/fpga/usrp3/top/x400/constraints/pins/qsfp0_3.xdc
@@ -0,0 +1,21 @@
+#
+# Copyright 2021 Ettus Research, a National Instruments Brand
+#
+# SPDX-License-Identifier: LGPL-3.0-or-later
+#
+# Description:
+#   QSFP28 Port 0 (Lane 3) pin constraints for X410.
+#
+
+###############################################################################
+# Pin constraints for the MGTs (QSFP28 ports)
+###############################################################################
+
+# Bank 131 (Quad X0Y4, Lanes X0Y16-X0Y19)
+# Lane 3 (X0Y19)
+
+set_property PACKAGE_PIN B36  [get_ports {QSFP0_3_RX_P}]
+set_property PACKAGE_PIN B37  [get_ports {QSFP0_3_RX_N}]
+
+set_property PACKAGE_PIN A33  [get_ports {QSFP0_3_TX_P}]
+set_property PACKAGE_PIN A34  [get_ports {QSFP0_3_TX_N}]
diff --git a/fpga/usrp3/top/x400/constraints/pins/qsfp1_0.xdc b/fpga/usrp3/top/x400/constraints/pins/qsfp1_0.xdc
new file mode 100644
index 000000000..2c68bf7db
--- /dev/null
+++ b/fpga/usrp3/top/x400/constraints/pins/qsfp1_0.xdc
@@ -0,0 +1,29 @@
+#
+# Copyright 2021 Ettus Research, a National Instruments Brand
+#
+# SPDX-License-Identifier: LGPL-3.0-or-later
+#
+# Description:
+#   QSFP28 Port 1 (Lane 0) pin constraints for X410.
+#
+
+###############################################################################
+# Pin constraints for the MGTs (QSFP28 ports)
+###############################################################################
+
+# Bank 128 (Quad X0Y1, Lanes X0Y4-X0Y7)
+# Lane 0 (X0Y4)
+
+set_property PACKAGE_PIN AA38 [get_ports {QSFP1_0_RX_P}]
+set_property PACKAGE_PIN AA39 [get_ports {QSFP1_0_RX_N}]
+
+set_property PACKAGE_PIN Y35  [get_ports {QSFP1_0_TX_P}]
+set_property PACKAGE_PIN Y36  [get_ports {QSFP1_0_TX_N}]
+
+###############################################################################
+# GTY_RCV_CLK_P can only be used with QSFP1
+###############################################################################
+
+set_property PACKAGE_PIN Y31 [get_ports {GTY_RCV_CLK_P}]
+set_property PACKAGE_PIN Y32 [get_ports {GTY_RCV_CLK_N}]
+set_property IOSTANDARD DIFF_SSTL12 [get_ports {GTY_RCV_CLK_*}]
diff --git a/fpga/usrp3/top/x400/constraints/pins/qsfp1_1.xdc b/fpga/usrp3/top/x400/constraints/pins/qsfp1_1.xdc
new file mode 100644
index 000000000..cd0bb5459
--- /dev/null
+++ b/fpga/usrp3/top/x400/constraints/pins/qsfp1_1.xdc
@@ -0,0 +1,21 @@
+#
+# Copyright 2021 Ettus Research, a National Instruments Brand
+#
+# SPDX-License-Identifier: LGPL-3.0-or-later
+#
+# Description:
+#   QSFP28 Port 1 (Lane 1) pin constraints for X410.
+#
+
+###############################################################################
+# Pin constraints for the MGTs (QSFP28 ports)
+###############################################################################
+
+# Bank 128 (Quad X0Y1, Lanes X0Y4-X0Y7)
+# Lane 1 (X0Y5)
+
+set_property PACKAGE_PIN W38  [get_ports {QSFP1_1_RX_P}]
+set_property PACKAGE_PIN W39  [get_ports {QSFP1_1_RX_N}]
+
+set_property PACKAGE_PIN V35  [get_ports {QSFP1_1_TX_P}]
+set_property PACKAGE_PIN V36  [get_ports {QSFP1_1_TX_N}]
diff --git a/fpga/usrp3/top/x400/constraints/pins/qsfp1_2.xdc b/fpga/usrp3/top/x400/constraints/pins/qsfp1_2.xdc
new file mode 100644
index 000000000..4e267c2c7
--- /dev/null
+++ b/fpga/usrp3/top/x400/constraints/pins/qsfp1_2.xdc
@@ -0,0 +1,21 @@
+#
+# Copyright 2021 Ettus Research, a National Instruments Brand
+#
+# SPDX-License-Identifier: LGPL-3.0-or-later
+#
+# Description:
+#   QSFP28 Port 1 (Lane 2) pin constraints for X410.
+#
+
+###############################################################################
+# Pin constraints for the MGTs (QSFP28 ports)
+###############################################################################
+
+# Bank 128 (Quad X0Y1, Lanes X0Y4-X0Y7)
+# Lane 2 (X0Y6)
+
+set_property PACKAGE_PIN U38  [get_ports {QSFP1_2_RX_P}]
+set_property PACKAGE_PIN U39  [get_ports {QSFP1_2_RX_N}]
+
+set_property PACKAGE_PIN T35  [get_ports {QSFP1_2_TX_P}]
+set_property PACKAGE_PIN T36  [get_ports {QSFP1_2_TX_N}]
diff --git a/fpga/usrp3/top/x400/constraints/pins/qsfp1_3.xdc b/fpga/usrp3/top/x400/constraints/pins/qsfp1_3.xdc
new file mode 100644
index 000000000..e56ee3b7e
--- /dev/null
+++ b/fpga/usrp3/top/x400/constraints/pins/qsfp1_3.xdc
@@ -0,0 +1,21 @@
+#
+# Copyright 2021 Ettus Research, a National Instruments Brand
+#
+# SPDX-License-Identifier: LGPL-3.0-or-later
+#
+# Description:
+#   QSFP28 Port 1 (Lane 3) pin constraints for X410.
+#
+
+###############################################################################
+# Pin constraints for the MGTs (QSFP28 ports)
+###############################################################################
+
+# Bank 128 (Quad X0Y1, Lanes X0Y4-X0Y7)
+# Lane 3 (X0Y7)
+
+set_property PACKAGE_PIN R38  [get_ports {QSFP1_3_RX_P}]
+set_property PACKAGE_PIN R39  [get_ports {QSFP1_3_RX_N}]
+
+set_property PACKAGE_PIN R33  [get_ports {QSFP1_3_TX_P}]
+set_property PACKAGE_PIN R34  [get_ports {QSFP1_3_TX_N}]
diff --git a/fpga/usrp3/top/x400/constraints/pins/rfdc_2x2.xdc b/fpga/usrp3/top/x400/constraints/pins/rfdc_2x2.xdc
new file mode 100644
index 000000000..140150d17
--- /dev/null
+++ b/fpga/usrp3/top/x400/constraints/pins/rfdc_2x2.xdc
@@ -0,0 +1,86 @@
+#
+# Copyright 2021 Ettus Research, a National Instruments Brand
+#
+# SPDX-License-Identifier: LGPL-3.0-or-later
+#
+# Description:
+#   RF data converters pin constraints for X410.
+#   Note: commented constraints are left for documentation purposes.
+#
+
+# SYSREF input for data converters.
+set_property PACKAGE_PIN U4  [get_ports {SYSREF_RF_N}]
+set_property PACKAGE_PIN U5  [get_ports {SYSREF_RF_P}]
+
+###############################################################################
+# Pin constraints for the ADCs
+###############################################################################
+
+# ADC Reference Clocks for Slot 0 (DBA)
+set_property PACKAGE_PIN AF5 [get_ports {ADC_CLK_P[0]}]
+set_property PACKAGE_PIN AF4 [get_ports {ADC_CLK_N[0]}]
+set_property PACKAGE_PIN AD5 [get_ports {ADC_CLK_P[1]}]
+set_property PACKAGE_PIN AD4 [get_ports {ADC_CLK_N[1]}]
+
+# ADC Reference Clocks for Slot 1 (DBB)
+set_property PACKAGE_PIN AB5 [get_ports {ADC_CLK_P[2]}]
+set_property PACKAGE_PIN AB4 [get_ports {ADC_CLK_N[2]}]
+set_property PACKAGE_PIN Y5  [get_ports {ADC_CLK_P[3]}]
+set_property PACKAGE_PIN Y4  [get_ports {ADC_CLK_N[3]}]
+
+# ADC Inputs for Slot 0 (DBA)
+# Note: numbering here does NOT match schematic, but it is the right order
+# according to RF BD Connection spec.
+# set_property PACKAGE_PIN AH2 [get_ports {DB0_RX_P[3]}]
+# set_property PACKAGE_PIN AH1 [get_ports {DB0_RX_N[3]}]
+# set_property PACKAGE_PIN AK2 [get_ports {DB0_RX_P[2]}]
+# set_property PACKAGE_PIN AK1 [get_ports {DB0_RX_N[2]}]
+set_property PACKAGE_PIN AM2 [get_ports {DB0_RX_P[1]}]
+set_property PACKAGE_PIN AM1 [get_ports {DB0_RX_N[1]}]
+set_property PACKAGE_PIN AP2 [get_ports {DB0_RX_P[0]}]
+set_property PACKAGE_PIN AP1 [get_ports {DB0_RX_N[0]}]
+
+# ADC Inputs for Slot 1 (DBB)
+# Note: numbering here does NOT match schematic, but it is the right order
+# according to RF BD Connection spec.
+# set_property PACKAGE_PIN Y2  [get_ports {DB1_RX_P[3]}]
+# set_property PACKAGE_PIN Y1  [get_ports {DB1_RX_N[3]}]
+# set_property PACKAGE_PIN AB2 [get_ports {DB1_RX_P[2]}]
+# set_property PACKAGE_PIN AB1 [get_ports {DB1_RX_N[2]}]
+set_property PACKAGE_PIN AD2 [get_ports {DB1_RX_P[1]}]
+set_property PACKAGE_PIN AD1 [get_ports {DB1_RX_N[1]}]
+set_property PACKAGE_PIN AF2 [get_ports {DB1_RX_P[0]}]
+set_property PACKAGE_PIN AF1 [get_ports {DB1_RX_N[0]}]
+
+
+###############################################################################
+# Pin constraints for the DACs
+###############################################################################
+
+# DAC Reference Clock for Slot 0 (DBA)
+set_property PACKAGE_PIN R5  [get_ports {DAC_CLK_P[0]}]
+set_property PACKAGE_PIN R4  [get_ports {DAC_CLK_N[0]}]
+
+# DAC Reference Clock for Slot 1 (DBB)
+set_property PACKAGE_PIN N5  [get_ports {DAC_CLK_P[1]}]
+set_property PACKAGE_PIN N4  [get_ports {DAC_CLK_N[1]}]
+
+# DAC Outputs for Slot 0 (DBA)
+set_property PACKAGE_PIN U2  [get_ports {DB0_TX_P[0]}]
+set_property PACKAGE_PIN U1  [get_ports {DB0_TX_N[0]}]
+set_property PACKAGE_PIN R2  [get_ports {DB0_TX_P[1]}]
+set_property PACKAGE_PIN R1  [get_ports {DB0_TX_N[1]}]
+# set_property PACKAGE_PIN N2  [get_ports {DB0_TX_P[2]}]
+# set_property PACKAGE_PIN N1  [get_ports {DB0_TX_N[2]}]
+# set_property PACKAGE_PIN L2  [get_ports {DB0_TX_P[3]}]
+# set_property PACKAGE_PIN L1  [get_ports {DB0_TX_N[3]}]
+
+# DAC Outputs for Slot 1 (DBB)
+set_property PACKAGE_PIN J2  [get_ports {DB1_TX_P[0]}]
+set_property PACKAGE_PIN J1  [get_ports {DB1_TX_N[0]}]
+set_property PACKAGE_PIN G2  [get_ports {DB1_TX_P[1]}]
+set_property PACKAGE_PIN G1  [get_ports {DB1_TX_N[1]}]
+# set_property PACKAGE_PIN E2  [get_ports {DB1_TX_P[2]}]
+# set_property PACKAGE_PIN E1  [get_ports {DB1_TX_N[2]}]
+# set_property PACKAGE_PIN C2  [get_ports {DB1_TX_P[3]}]
+# set_property PACKAGE_PIN C1  [get_ports {DB1_TX_N[3]}]
diff --git a/fpga/usrp3/top/x400/constraints/timing/common.xdc b/fpga/usrp3/top/x400/constraints/timing/common.xdc
new file mode 100644
index 000000000..288465ad0
--- /dev/null
+++ b/fpga/usrp3/top/x400/constraints/timing/common.xdc
@@ -0,0 +1,415 @@
+#
+# Copyright 2021 Ettus Research, a National Instruments Brand
+#
+# SPDX-License-Identifier: LGPL-3.0-or-later
+#
+# Description:
+#   Common timing constraints for X410.
+#
+
+###############################################################################
+# Motherboard Clocks
+###############################################################################
+
+# 10/25 MHz reference clock from rear panel connector.
+# Constrain to the fastest possible clock rate.
+set ref_clk_period 40.00
+create_clock -name ref_clk     -period $ref_clk_period     [get_ports BASE_REFCLK_FPGA_P]
+
+# PLL Reference Clock. Used to derive data clocks.
+# Constrain to the fastest possible clock rate supported in the driver.
+# MPM supports 61.44 / 62.5 / 64.0 MHz.
+set pll_ref_clk_period 15.625
+create_clock -name pll_ref_clk -period $pll_ref_clk_period [get_ports PLL_REFCLK_FPGA_P]
+
+# MGT Clocks
+#    Clock Reference   |   Frequency      |   Purpose
+#   MGT_REFCLK_LMK0    |  156.25/125 MHz  |  10 GbE
+#   MGT_REFCLK_LMK1    |  100.00 MHz      |  Reserved
+#   MGT_REFCLK_LMK2    |  100.00 MHz      |  Reserved
+#   MGT_REFCLK_LMK3    |  156.25/125 MHz  |  10 GbE
+create_clock -name mgt_ref_0 -period  6.400 [get_ports MGT_REFCLK_LMK0_P]
+create_clock -name mgt_ref_1 -period 10.000 [get_ports MGT_REFCLK_LMK1_P]
+create_clock -name mgt_ref_2 -period 10.400 [get_ports MGT_REFCLK_LMK2_P]
+create_clock -name mgt_ref_3 -period  6.400 [get_ports MGT_REFCLK_LMK3_P]
+
+# Virtual clocks for constraining misc. I/Os.
+create_clock -name async_in_clk  -period 50.00
+create_clock -name async_out_clk -period 50.00
+
+
+###############################################################################
+# Aliases for auto-generated clocks
+###############################################################################
+
+# Name the PS clocks. These are originally declared in the PS8 IP block.
+# Create the clocks based on the PS PLCLK pins.
+# This generates critical warnings in the OSS flow because the clocks were already
+# define and we are completely rewriting the old clock definition... this is OK.
+create_clock -name clk100 -period 10.000 \
+  [get_pins -of_objects [get_cells -hierarchical {*PS8_i}] -filter {NAME =~ *PLCLK[0]}]
+
+create_clock -name clk40  -period 25.000 \
+  [get_pins -of_objects [get_cells -hierarchical {*PS8_i}] -filter {NAME =~ *PLCLK[1]}]
+
+create_clock -name clk166 -period  6.000 \
+  [get_pins -of_objects [get_cells -hierarchical {*PS8_i}] -filter {NAME =~ *PLCLK[2]}]
+
+create_clock -name clk200 -period  5.000 \
+  [get_pins -of_objects [get_cells -hierarchical {*PS8_i}] -filter {NAME =~ *PLCLK[3]}]
+
+
+###############################################################################
+# Sync to DB synthesizer sync CPLD input
+###############################################################################
+
+# synth_sync_hold_requirement and synth_sync_setup_requirement are shared
+# between the FPGA and DB CPLD. The values are set in shared_constants.sdc
+set synth_sync_ports [get_ports {DB0_SYNTH_SYNC DB1_SYNTH_SYNC}]
+set_output_delay -clock [get_clocks pll_ref_clk] -min -$synth_sync_hold_requirement $synth_sync_ports
+set_output_delay -clock [get_clocks pll_ref_clk] -max $synth_sync_setup_requirement $synth_sync_ports
+
+
+###############################################################################
+# SPI to MB CPLD (PL)
+#   This interface is defined as system synchronous to pll_ref_clk.
+###############################################################################
+
+# The output delays are chosen to allow a large time window of valid data for
+# the MB CPLD logic.
+set spi_min_out_delay  0.000
+set spi_max_out_delay 11.000
+
+# Set output constraints for all ports.
+set spi_out_ports [get_ports {PL_CPLD_SCLK PL_CPLD_MOSI PL_CPLD_CS0_n PL_CPLD_CS1_n}]
+set_output_delay -clock [get_clocks pll_ref_clk] -min $spi_min_out_delay $spi_out_ports
+set_output_delay -clock [get_clocks pll_ref_clk] -max $spi_max_out_delay $spi_out_ports
+
+# Both CPLD and FPGA use PLL reference clock from a common clock chip.
+# The traces from that clock chip to the ICs are not length matched. Assume a
+# worst case clock difference of 0.5 ns at the IC inputs. There is no direction
+# defined. The clock can arrive faster or slower at one IC.
+set pl_clock_diff 0.500
+
+# The longest trace on the PL SPI interface is (assuming 170.0 ps/in)
+#   Longest trace | Trace length | Trace delay
+#   PL_CPLD_MISO  |   3.863 in   |   0.657 ns
+set pl_spi_board_delay 0.657
+
+# Output delay timings of the MB CPLD design, which still meet timing
+set pl_spi_cpld_min_out -1.000
+set pl_spi_cpld_max_out  8.000
+
+set spi_in_port [get_ports {PL_CPLD_MISO}]
+set_input_delay -clock [get_clocks pll_ref_clk] \
+  -min [expr {- $pl_spi_cpld_min_out - $pl_clock_diff}] \
+  $spi_in_port
+set_input_delay -clock [get_clocks pll_ref_clk] \
+  -max [expr {$pll_ref_clk_period - $pl_spi_cpld_max_out + $pl_spi_board_delay + $pl_clock_diff}] \
+  $spi_in_port
+
+
+###############################################################################
+# 10 GbE
+###############################################################################
+
+# These are the exceptions from "xge_pcs_pma_exceptions.xdc" which are to be
+# used when not using the example design.
+#
+# "clk100" used here is the clock that's connected to the "dclk" input in the core.
+set_max_delay -from [get_clocks -of_objects [get_pins -hierarchical -filter {NAME =~ */channel_inst/*_CHANNEL_PRIM_INST/RXOUTCLK}]] -to [get_clocks -of_objects [get_pins -hierarchical -filter {NAME =~ */channel_inst/*_CHANNEL_PRIM_INST/TXOUTCLK}]] -datapath_only 6.40
+set_max_delay -from [get_clocks -of_objects [get_pins -hierarchical -filter {NAME =~ */channel_inst/*_CHANNEL_PRIM_INST/TXOUTCLK}]] -to [get_clocks -of_objects [get_pins -hierarchical -filter {NAME =~ */channel_inst/*_CHANNEL_PRIM_INST/RXOUTCLK}]] -datapath_only 6.40
+set_max_delay -from [get_clocks -of_objects [get_pins -hierarchical -filter {NAME =~ */channel_inst/*_CHANNEL_PRIM_INST/RXOUTCLK}]] -to [get_clocks clk100] -datapath_only 6.40
+set_max_delay -from [get_clocks -of_objects [get_pins -hierarchical -filter {NAME =~ */channel_inst/*_CHANNEL_PRIM_INST/TXOUTCLK}]] -to [get_clocks clk100] -datapath_only 6.40
+set_max_delay -from [get_clocks clk100] -to [get_clocks -of_objects [get_pins -hierarchical -filter {NAME =~ */channel_inst/*_CHANNEL_PRIM_INST/TXOUTCLK}]] -datapath_only 10.000
+set_max_delay -from [get_clocks clk100] -to [get_clocks -of_objects [get_pins -hierarchical -filter {NAME =~ */channel_inst/*_CHANNEL_PRIM_INST/RXOUTCLK}]] -datapath_only 10.000
+
+
+###############################################################################
+# DIO
+#   Those GPIO pins are considered asynchronous paths. The user has to add
+#   constraints in case required. Therefore not setting false_paths from / to
+#   user logic to allow user generated timing constraints to be applied.
+###############################################################################
+
+# Ignore paths from "slow" PS interface to not interfere with user constraints.
+set dio_ports     [get_ports {DIOA_FPGA[*] DIOB_FPGA[*]}]
+set dio_registers [get_cells -hierarchical -filter {NAME =~ *x4xx_dio_i* && IS_SEQUENTIAL && IS_PRIMITIVE}]
+set_false_path -from $dio_registers -to $dio_ports
+set_false_path -from $dio_ports     -to $dio_registers
+
+
+###############################################################################
+# PPS
+###############################################################################
+
+# The TRIG_IO port may be driven by either the PPS in BRC domain to
+# enable direct sync between 2 devices, or by any other user logic.
+# When PPS is exported through Trigger I/O, timing must be analyzed
+# to ensure determinism in the PPS exporting.
+# But, when other user logic drives TRIG_IO, then the port should be
+# treated as asynchronous (or close to async. at least).
+# To achieve this conditional timing analysis, the following trick is
+# used:
+#   1. A virtual copy of ref_clk is created for I/O timing - virtual_ref_clk
+#   2. Set output_delay constraints to assign a clock to the TRIG_IO port.
+#   3. A set_max_delay constraint is used to time the output path to TRIG_IO
+#        set_max_delay makes the timing constraint driver agnostic, and as long
+#        as the critical output delay is met for driving PPS through TRIG_IO,
+#        we should be fine as this requirement is relatively loose.
+
+# 1) Creating copy of ref_clk to only analyze timing to TRIG_IO port (output)
+# when output is driven by ref_clk (PPS generation in ref_clk domain).
+create_clock -name virtual_ref_clk -period $ref_clk_period
+
+# Trigger IO port is used as output for the PPS signal
+# TRIG_IO_1V8 trace length MB = 4.050 + 1.190 inch = 5.240 inch
+# TRIG_IO_1V8 trace length DB = 2.401 + 0.120 + 0.457 + 0.261 inch = 3.239 inch
+# TRIG_IO buffer max switching time = 3.3
+set trig_max_out_delay [expr {8.479 * 0.17 + 3.3}]
+
+# Set minimum output delay hold time to a small amount to grant external
+# devices some hold time. Delay should be simple to achieve as there is no PLL
+# in the clocking path and some combinatorial logic.
+set trig_min_out_delay 2.000
+
+# 2) set_output_delay for assigning clocks to TRIG_IO. Use zero for delay to
+# avoid adding extra delay requirements on top of the set_max|min_delay
+# constraints below.
+set_output_delay -clock [get_clocks virtual_ref_clk] 0.0 [get_ports {TRIG_IO}]
+
+# 3) Min and max delays make constraining driver agnostic. We just make sure
+# the critical timing for PPS export is met though.
+set_max_delay -through [get_port {TRIG_IO}] -to [get_clocks {virtual_ref_clk}] \
+  [expr {$ref_clk_period - $trig_max_out_delay}]
+set_min_delay -through [get_port {TRIG_IO}] -to [get_clocks {virtual_ref_clk}] \
+  $trig_min_out_delay
+
+# Treat TRIG_IO input as asynchronous.
+set_false_path -from [get_ports {TRIG_IO}]
+# For documentation purposes, these are the input max/min delays for TRIG_IO:
+#   - Input delay assuming zero trace delay and TRIG_IO buffer min switching
+#     time (B->A) = 0.1 ns.
+#   - TRIG_IO buffer max switching time (B->A = input) = 3.7 ns + same trace
+#     length as for output (8.479).
+
+# Assuming no delay on external clock distribution.
+
+# Account for the PPS min output delay only (for the case two X410 are directly
+# connected to each other).
+set pps_min_in_delay $trig_min_out_delay
+
+# PPS_IN trace length DB = 0.535 + 0.133 + 0.117 + 0.061 + 2.745 inch = 3.591 inch
+# PPS_IN trace length MB = 5.726 inch
+# PPS switch max propagation delay = 3.6
+
+# Assume 50% of the clock period is used for external PPS clock distribution as
+# the PPS out is used to synchronize one X410 (master) with another X410
+# (slave) the PPS out (trig_io) delay is added to the PPS input.
+set pps_max_in_delay [expr {9.317 * 0.17 + 3.6 + 0.5 * $ref_clk_period + $trig_max_out_delay}]
+
+# Apply PPS input constraints.
+set_input_delay -clock [get_clocks ref_clk] -min $pps_min_in_delay [get_ports {PPS_IN}]
+set_input_delay -clock [get_clocks ref_clk] -max $pps_max_in_delay [get_ports {PPS_IN}]
+
+# PPS clock domain crossing BRC -> PRC on the aligned edge.
+# Use a data path of half PLL reference clock period to make sure the value is
+# captured without metastability.
+set_max_delay -from [get_cells -hierarchical pps_delayed_brc_reg] \
+  -to [get_clocks pll_ref_clk*] [expr {$pll_ref_clk_period/2}]
+
+
+###############################################################################
+# LMK sync
+###############################################################################
+
+# The timings are derived from simulation.
+
+# Clock Buffer ADCLK944 -> FPGA.
+set buffer_to_fpga_min_clk_delay 0.997
+set buffer_to_fpga_max_clk_delay 1.154
+
+# Clock Buffer ADCLK944 -> Sample clock PLL (LMK04832).
+set buffer_to_spll_min_clk_delay 0.000
+set buffer_to_spll_max_clk_delay 0.014
+
+# FPGA -> Sample clock PLL SYNC input.
+set fpga_to_spll_min_clk_delay   0.381
+set fpga_to_spll_max_clk_delay   0.460
+
+# Sample clock PLL requirements.
+set lmk_sync_input_hold          4.000
+set lmk_sync_input_setup         4.000
+
+set lmk_sync_output_max_delay [expr {$fpga_to_spll_max_clk_delay + $buffer_to_fpga_max_clk_delay + \
+                                $lmk_sync_input_setup - $buffer_to_spll_min_clk_delay}]
+set lmk_sync_output_min_delay [expr {$fpga_to_spll_min_clk_delay + $buffer_to_fpga_min_clk_delay - \
+                                $buffer_to_spll_max_clk_delay - $lmk_sync_input_hold}]
+set_output_delay -clock ref_clk -max $lmk_sync_output_max_delay [get_ports {LMK_SYNC}]
+set_output_delay -clock ref_clk -min $lmk_sync_output_min_delay [get_ports {LMK_SYNC}]
+
+
+###############################################################################
+# SPLL SYSREF Capture
+###############################################################################
+
+# SYSREF is generated by the LMK04832 clocking chip (SPLL), which also produces
+# the PLL reference clock (PRC) used to generate data clocks with a MMCM. Both
+# SYSREF and PLL reference clock are directly fed into the RFSoC.
+# SYSREF is captured by the FPGA fabric in the PRC clock domain (MMCM's PRC
+# output) with a double synchronizer and then transfered to the RFDC clock
+# domain. Both SYSREF versions (PRC and RFDC) are used by downstream logic for
+# sync. purposes.
+# SYSREF is a continuous signal running at PRC freq. / 25, and it is
+# intentionally shifted in the LMK chip to align it closer to the
+# PRC's falling edge.
+# The added delay follows the formula:
+#   SYSREF LMK delay = 22 * sample clock period
+# The highest sampling frequency supported in MPM (3.072 GHz) is used for
+# timing constrains. Therefore, SYSREF LMK's delay = 22 * (1 / 3.072e9).
+set sysref_lmk_delay 7.161
+#
+# These are the signals' lengths and corresponding delays (assuming 170 ps/in):
+#   - SYSREF --> 5794 mils (5.794 inches) = 0.985 ns
+#   - PRC    --> 5668 mils (5.668 inches) = 0.964 ns
+#
+# For min/max input delay calculations, it is assumed min prop. delay of 0 ns,
+# which essentially over-constrains SYSREF.
+#
+# The max input delay is the latest that SYSREF may arrive w.r.t PRC, and it is
+# calculated as follows:
+#   Input delay (max) = SYSREF's LMK delay + SYSREF prop. delay (max)
+#                       - PRC prop. delay (min)
+set sysref_max_input_delay [expr {$sysref_lmk_delay + 0.985 - 0}]
+#
+# The min input delay is the earliest that SYSREF may arrive w.r.t PRC, and it
+# is calculated as follows:
+#   Input delay (min) = SYSREF's LMK delay + SYSREF prop. delay (min)
+#                       - PRC prop. delay (min)
+set sysref_min_input_delay [expr {$sysref_lmk_delay + 0 - 0.964}]
+
+set_input_delay -clock pll_ref_clk -max $sysref_max_input_delay [get_ports {SYSREF_FABRIC_P}]
+set_input_delay -clock pll_ref_clk -min $sysref_min_input_delay [get_ports {SYSREF_FABRIC_P}]
+
+
+###############################################################################
+# DB GPIO
+#   This interface is defined as system synchronous to pll_ref_clk.
+#   Some timing constants in this section are declared in
+#   <repo>/fpga/usrp3/top/x400/constraints/timing/shared_constants.sdc
+###############################################################################
+
+# Set output constraints for all ports.
+set db_gpio_ports [get_ports {DB0_GPIO[*] DB1_GPIO[*]}]
+set_output_delay -clock [get_clocks pll_ref_clk] -min $db_gpio_fpga_min_out $db_gpio_ports
+set_output_delay -clock [get_clocks pll_ref_clk] -max $db_gpio_fpga_max_out $db_gpio_ports
+
+# Output enable signal is available one clock cycle ahead of valid data, this
+# enables the use of multi-cycle paths.
+set db_gpio_out_en_regs [get_cells -hierarchical -filter \
+  {PRIMITIVE_TYPE =~ REGISTER.*.* && NAME =~ "*bytestream_output_enable*"}]
+set_multicycle_path 2 -setup -from $db_gpio_out_en_regs -to $db_gpio_ports
+set_multicycle_path 1 -hold  -from $db_gpio_out_en_regs -to $db_gpio_ports
+
+# Calculate output delays back from capturing edge, add board delay and clock
+# difference.
+# Assume worst case as data being generated late and receiving an early clock:
+#  - Max CPLD TCO
+#  - Max data propagation delay
+#  - Max CPLD clock propagation delay and minimum FPGA clock propagation delay
+#  - Maximum delay from MC100EPT23 clock buffer
+set_input_delay -clock pll_ref_clk \
+  -max [expr {$pll_ref_clk_period - $db_gpio_cpld_max_out + $db_gpio_board_max_delay \
+              + $db_cpld_prc_clock_prop_max - $fpga_prc_clock_prop_min + $clock_translate_max}] \
+  $db_gpio_ports
+
+# Negate minimum output delay as it is defined from the change to the start
+# clock edge.
+# Assume worst case as data being generated early and receiving an late clock:
+#  - Min CPLD TCO
+#  - Min data propagation delay (0)
+#  - Min CPLD clock propagation delay and max FPGA clock propagation delay
+set_input_delay -clock pll_ref_clk \
+  -min [expr {- $db_gpio_cpld_min_out                                    \
+              - $db_gpio_board_min_delay                                 \
+              - $db_cpld_prc_clock_prop_min + $fpga_prc_clock_prop_max}] \
+  $db_gpio_ports
+
+
+###############################################################################
+# x4xx_ps_rfdc_bd
+###############################################################################
+
+# The calibration_muxes component contains a clock crossing from some GPIO
+# component instances that are synchronous to a configuration clock and ending
+# in some AXI registers synchronous to data clock. The GPIO registers are
+# essentially constant. When they are changing (due to a register write), the
+# latching registers can definitely become metastable, so the software must
+# ensure that the corrupted data appears at a safe time.
+set gpio_regs [get_pins -of [get_cells -filter {IS_SEQUENTIAL && NAME =~ *rfdc/calibration_muxes/axi_gpio*} -hier] -filter {IS_CLOCK}]
+set mux_regs [get_cells -hier -filter {IS_SEQUENTIAL && NAME =~ *rfdc/calibration_muxes/gpio_to_axis_mux*}]
+set_false_path -from $gpio_regs -to $mux_regs
+
+# This property tells Vivado that we require these clocks to be well aligned.
+# We have synchronous clock domain crossings between these clocks that can have
+# large hold violations after placement due to uneven clock loading.
+set_property CLOCK_DELAY_GROUP DataClkGroup [get_nets -hier -filter {\
+  NAME=~*/rfdc/data_clock_mmcm/inst/CLK_CORE_DRP_I/clk_inst/data_clk        ||\
+  NAME=~*/rfdc/data_clock_mmcm/inst/CLK_CORE_DRP_I/clk_inst/data_clk_2x     ||\
+  NAME=~*/rfdc/data_clock_mmcm/inst/CLK_CORE_DRP_I/clk_inst/pll_ref_clk_out ||\
+  NAME=~*/rfdc/data_clock_mmcm/inst/CLK_CORE_DRP_I/clk_inst/rfdc_clk_2x     ||\
+  NAME=~*/rfdc/data_clock_mmcm/inst/CLK_CORE_DRP_I/clk_inst/rfdc_clk \
+}]
+
+# We treat rfdc_clk and data_clk buffers as asynchronous, with knowledge that
+# code clocked in this domain will be reset after this clocked is enabled. This
+# will make timing easier to meet on these clock domains.
+set_false_path -from [get_pins -hierarchical -filter {NAME =~ */rfdc/clock_gates_0/*rEnableRfdcBufg1x*/C}] \
+               -to   [get_pins -hierarchical -filter {NAME =~ */rfdc/rf_clock_buffers/rfdc_clk_1x_buf/*BUFGCE*/CE}]
+
+set_false_path -from [get_pins -hierarchical -filter {NAME =~ */rfdc/clock_gates_0/*rEnableRfdcBufg2x*/C}] \
+               -to   [get_pins -hierarchical -filter {NAME =~ */rfdc/rf_clock_buffers/rfdc_clk_2x_buf/*BUFGCE*/CE}]
+
+set_false_path -from [get_pins -hierarchical -filter {NAME =~ */rfdc/clock_gates_0/*rEnableDataBufg1x*/C}] \
+               -to   [get_pins -hierarchical -filter {NAME =~ */rfdc/clock_gates_0/*DataClk1xSafeBufg/CE}]
+
+set_false_path -from [get_pins -hierarchical -filter {NAME =~ */rfdc/clock_gates_0/*rEnableDataBufg2x*/C}] \
+               -to   [get_pins -hierarchical -filter {NAME =~ */rfdc/clock_gates_0/*DataClk2xSafeBufg/CE}]
+
+
+###############################################################################
+# Misc Constraints
+###############################################################################
+
+# Double synchronizer false paths.
+set_false_path -to [get_pins -hierarchical -filter {NAME =~ */synchronizer_false_path/stages[0].value_reg[0][*]/D}]
+set_false_path -to [get_pins -hierarchical -filter {NAME =~ */rf_reset_controller*/*_ms_reg/D}]
+set_false_path -to [get_pins -hierarchical -filter {NAME =~ */rfdc/rf_nco_reset_0/*_ms*/D}]
+
+# GTY_RCV_CLK_* is driven by a OBUFDS_GTE4 buffer, which has an asynchronous
+# clock-enable pin.
+# By experimentation, it was observed that explicitly setting a false_path to
+# this pin improved timing.
+set gty_rcv_clk_buff_ceb [get_pins -of_objects [get_cells -of_objects [all_fanin -flat -startpoints_only [get_ports {GTY_RCV_CLK_P}]]] -filter {NAME=~ "*CEB"}]
+set_false_path -from [get_clocks {clk40}] -through $gty_rcv_clk_buff_ceb
+
+
+###############################################################################
+# Asynchronous / misc. I/O constraints
+#   Loosely constrain these to prevent warnings in Vivado.
+#   Using set_input_delay associates the I/Os to a clock group, but
+#   set_(min|max)_delay overwrites the setup/hold analysis values.
+###############################################################################
+
+set async_inputs [get_ports {FPGA_AUX_REF}]
+
+set_input_delay -clock [get_clocks async_in_clk] 0.000 $async_inputs
+set_max_delay -from $async_inputs 50.000
+set_min_delay -from $async_inputs 0.000
+
+
+set async_outputs [get_ports {FABRIC_CLK_OUT_P PPS_LED}]
+
+set_output_delay -clock [get_clocks async_out_clk] 0.000 $async_outputs
+set_max_delay -to $async_outputs 50.000
+set_min_delay -to $async_outputs 0.000
diff --git a/fpga/usrp3/top/x400/constraints/timing/dram.xdc b/fpga/usrp3/top/x400/constraints/timing/dram.xdc
new file mode 100644
index 000000000..ed2d2aa64
--- /dev/null
+++ b/fpga/usrp3/top/x400/constraints/timing/dram.xdc
@@ -0,0 +1,55 @@
+#
+# Copyright 2021 Ettus Research, a National Instruments Brand
+#
+# SPDX-License-Identifier: LGPL-3.0-or-later
+#
+# Description:
+#   DRAM timing constraints for X410.
+#
+
+set DramSysClockPeriod 9.996
+set DramSysClockWave   {0.0 4.998}
+create_clock -name Dram0SysClock -period $DramSysClockPeriod -waveform $DramSysClockWave [get_ports {DRAM0_REFCLK_P}]
+create_clock -name Dram1SysClock -period $DramSysClockPeriod -waveform $DramSysClockWave [get_ports {DRAM1_REFCLK_P}]
+
+## This calibration signal is a static signal. Once asserted it will stay HIGH.
+## The multi cycle path constraint is added to improve timing.
+set_multicycle_path -setup 8 -from [get_pins */inst/u_ddr4_mem_intfc/u_ddr_cal_top/calDone*/C]
+set_multicycle_path -end -hold 7 -from [get_pins */inst/u_ddr4_mem_intfc/u_ddr_cal_top/calDone*/C]
+
+## These signals once asserted, stay asserted for multiple clock cycles.
+## False path constraint is added to improve the HOLD timing.
+set_false_path -hold -to [get_pins */inst/*/*/*/*/*/*.u_xiphy_control/xiphy_control/RIU_ADDR*]
+set_false_path -hold -to [get_pins */inst/*/*/*/*/*/*.u_xiphy_control/xiphy_control/RIU_WR_DATA*]
+
+## Multi-cycle path constraints for Fabric - RIU clock domain crossing signals
+set_max_delay 5.0  -datapath_only -from [get_pins */inst/*/*/*/u_ddr_cal_addr_decode/io_ready_lvl_reg/C]    -to [get_pins */inst/*/u_io_ready_lvl_sync/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 5.0  -datapath_only -from [get_pins */inst/*/*/*/u_ddr_cal_addr_decode/io_read_data_reg[*]/C] -to [get_pins */inst/*/u_io_read_data_sync/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 3.0  -datapath_only -from [get_pins */inst/*/*/*/phy_ready_riuclk_reg/C]                      -to [get_pins */inst/*/u_phy2clb_phy_ready_sync/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 3.0  -datapath_only -from [get_pins */inst/*/*/*/bisc_complete_riuclk_reg/C]                  -to [get_pins */inst/*/u_phy2clb_bisc_complete_sync/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 3.0  -datapath_only -from [get_pins */inst/*/*/io_addr_strobe_lvl_riuclk_reg/C]               -to [get_pins */inst/*/u_io_addr_strobe_lvl_sync/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 3.0  -datapath_only -from [get_pins */inst/*/*/io_write_strobe_riuclk_reg/C]                  -to [get_pins */inst/*/u_io_write_strobe_sync/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 3.0  -datapath_only -from [get_pins */inst/*/*/io_address_riuclk_reg[*]/C]                    -to [get_pins */inst/*/u_io_addr_sync/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 3.0  -datapath_only -from [get_pins */inst/*/*/io_write_data_riuclk_reg[*]/C]                 -to [get_pins */inst/*/u_io_write_data_sync/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 10.0 -datapath_only -from [get_pins */inst/*/en_vtc_in_reg/C]                                 -to [get_pins */inst/*/u_en_vtc_sync/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 10.0 -datapath_only -from [get_pins */inst/*/*/riu2clb_valid_r1_riuclk_reg[*]/C]              -to [get_pins */inst/*/u_riu2clb_valid_sync/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 10.0 -datapath_only -from [get_pins */inst/*/*/*/phy2clb_fixdly_rdy_low_riuclk_int_reg[*]/C]  -to [get_pins */inst/*/u_phy2clb_fixdly_rdy_low/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 10.0 -datapath_only -from [get_pins */inst/*/*/*/phy2clb_fixdly_rdy_upp_riuclk_int_reg[*]/C]  -to [get_pins */inst/*/u_phy2clb_fixdly_rdy_upp/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 10.0 -datapath_only -from [get_pins */inst/*/*/*/phy2clb_phy_rdy_low_riuclk_int_reg[*]/C]     -to [get_pins */inst/*/u_phy2clb_phy_rdy_low/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 10.0 -datapath_only -from [get_pins */inst/*/*/*/phy2clb_phy_rdy_upp_riuclk_int_reg[*]/C]     -to [get_pins */inst/*/u_phy2clb_phy_rdy_upp/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 10.0 -datapath_only -from [get_pins */inst/*/rst_r1_reg/C]                                    -to [get_pins */inst/*/u_fab_rst_sync/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 3.0  -datapath_only -from [get_pins */inst/*/*/*/clb2phy_t_b_addr_riuclk_reg/C]               -to [get_pins */inst/*/*/*/clb2phy_t_b_addr_i_reg[0]/D]
+set_max_delay 3.0  -datapath_only -from [get_pins */inst/*/*/*/*/slave_en_lvl_reg/C]                        -to [get_pins */inst/*/*/*/*/u_slave_en_sync/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 3.0  -datapath_only -from [get_pins */inst/*/*/*/*/slave_we_r_reg/C]                          -to [get_pins */inst/*/*/*/*/u_slave_we_sync/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 3.0  -datapath_only -from [get_pins */inst/*/*/*/*/slave_addr_r_reg[*]/C]                     -to [get_pins */inst/*/*/*/*/u_slave_addr_sync/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 3.0  -datapath_only -from [get_pins */inst/*/*/*/*/slave_di_r_reg[*]/C]                       -to [get_pins */inst/*/*/*/*/u_slave_di_sync/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 3.0  -datapath_only -from [get_pins */inst/*/*/*/*/slave_rdy_cptd_sclk_reg/C]                 -to [get_pins */inst/*/*/*/*/u_slave_rdy_cptd_sync/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 12.0 -datapath_only -from [get_pins */inst/*/*/*/*/slave_rdy_lvl_fclk_reg/C]                  -to [get_pins */inst/*/*/*/*/u_slave_rdy_sync/SYNC[*].sync_reg_reg[0]/D]
+set_max_delay 12.0 -datapath_only -from [get_pins */inst/*/*/*/*/slave_do_fclk_reg[*]/C]                    -to [get_pins */inst/*/*/*/*/u_slave_do_sync/SYNC[*].sync_reg_reg[0]/D]
+set_false_path -through [get_pins */inst/u_ddr4_infrastructure/sys_rst]
+set_false_path -from    [get_pins  */inst/*/input_rst_design_reg/C]  -to [get_pins */inst/*/rst_div_sync_r_reg[0]/D]
+set_false_path -from    [get_pins  */inst/*/input_rst_design_reg/C]  -to [get_pins */inst/*/rst_riu_sync_r_reg[0]/D]
+set_false_path -from    [get_pins  */inst/*/input_rst_design_reg/C]  -to [get_pins */inst/*/rst_mb_sync_r_reg[0]/D]
+set_false_path -from    [get_pins  */inst/*/rst_async_riu_div_reg/C] -to [get_pins */inst/*/rst_div_sync_r_reg[0]/D]
+set_false_path -from    [get_pins  */inst/*/rst_async_mb_reg/C]      -to [get_pins */inst/*/rst_mb_sync_r_reg[0]/D]
+set_false_path -from    [get_pins  */inst/*/rst_async_riu_div_reg/C] -to [get_pins */inst/*/rst_riu_sync_r_reg[0]/D]
diff --git a/fpga/usrp3/top/x400/constraints/timing/qsfp_10gbe.xdc b/fpga/usrp3/top/x400/constraints/timing/qsfp_10gbe.xdc
new file mode 100644
index 000000000..2438138e3
--- /dev/null
+++ b/fpga/usrp3/top/x400/constraints/timing/qsfp_10gbe.xdc
@@ -0,0 +1,19 @@
+#
+# Copyright 2021 Ettus Research, a National Instruments Brand
+#
+# SPDX-License-Identifier: LGPL-3.0-or-later
+#
+# Description:
+#   10 GbE Timing Constraints.
+#
+
+# Specify which clock is used for dclk in the 10 GbE IP.
+set DCLK_NAME clk100
+
+# Constraints taken from xge_pcs_pma_exceptions.xdc in the example design.
+set_max_delay -from [get_clocks -of_objects [get_pins -hierarchical -filter {NAME =~ */channel_inst/*_CHANNEL_PRIM_INST/RXOUTCLK}]] -to [get_clocks -of_objects [get_pins -hierarchical -filter {NAME =~ */channel_inst/*_CHANNEL_PRIM_INST/TXOUTCLK}]] -datapath_only 6.40 
+set_max_delay -from [get_clocks -of_objects [get_pins -hierarchical -filter {NAME =~ */channel_inst/*_CHANNEL_PRIM_INST/TXOUTCLK}]] -to [get_clocks -of_objects [get_pins -hierarchical -filter {NAME =~ */channel_inst/*_CHANNEL_PRIM_INST/RXOUTCLK}]] -datapath_only 6.40
+set_max_delay -from [get_clocks -of_objects [get_pins -hierarchical -filter {NAME =~ */channel_inst/*_CHANNEL_PRIM_INST/RXOUTCLK}]] -to [get_clocks $DCLK_NAME] -datapath_only 6.40
+set_max_delay -from [get_clocks -of_objects [get_pins -hierarchical -filter {NAME =~ */channel_inst/*_CHANNEL_PRIM_INST/TXOUTCLK}]] -to [get_clocks $DCLK_NAME] -datapath_only 6.40
+set_max_delay -from [get_clocks $DCLK_NAME] -to [get_clocks -of_objects [get_pins -hierarchical -filter {NAME =~ */channel_inst/*_CHANNEL_PRIM_INST/TXOUTCLK}]] -datapath_only 10.000
+set_max_delay -from [get_clocks $DCLK_NAME] -to [get_clocks -of_objects [get_pins -hierarchical -filter {NAME =~ */channel_inst/*_CHANNEL_PRIM_INST/RXOUTCLK}]] -datapath_only 10.000
diff --git a/fpga/usrp3/top/x400/constraints/timing/shared_constants.sdc b/fpga/usrp3/top/x400/constraints/timing/shared_constants.sdc
new file mode 100644
index 000000000..e7d389435
--- /dev/null
+++ b/fpga/usrp3/top/x400/constraints/timing/shared_constants.sdc
@@ -0,0 +1,130 @@
+#
+# Copyright 2021 Ettus Research, a National Instruments Brand
+#
+# SPDX-License-Identifier: LGPL-3.0-or-later
+#
+# Description:
+#   Shared constants for the X410 FPGA and the ZBX CPLD.
+#
+
+# These output delays are more or less arbitrarily chosen, but they dictate the
+# delays at the input of the DB CPLD.
+# Since the CPLD is built in Quartus, the file extension is .sdc.
+set synth_sync_hold_requirement 1.0
+set synth_sync_setup_requirement 8.5
+
+# A MC100EPT23 clock translator is placed on the daughterboard to convert
+# pll_ref_clk clock IO Standard to 3.3V. The minimum and maximum delays across
+# this part are 1.1 ns and 1.8 ns, respectively.
+# https://www.onsemi.com/pub/Collateral/MC100EPT23-D.PDF
+set clock_translate_min 1.1
+set clock_translate_max 1.8
+
+## DB GPIO interface.
+# The following values have been adjusted after verifying the slack on input
+# and output path for the Post-synthesized designs for FPGA (Vivado) and CPLD
+# (Quartus). Values are chosen as those that provide the most slack for FPGA
+# timing, while still meeting timing on the CPLD.
+
+# FPGA output constraints
+set db_gpio_fpga_min_out  0.000
+set db_gpio_fpga_max_out  3.250
+
+# CPLD output constraints
+set db_gpio_cpld_min_out -2.000
+set db_gpio_cpld_max_out  8.500
+
+# The longest traces on the DB GPIO interface.
+# In order to compute the db_gpio_board_max_delay, the longest GPIO trace from
+# the FPGA to any of the DB connector was simulated, and its worst-case value
+# was added to the worst-case value obtained while simulating the longest GPIO
+# trace on the DB. Both directions (FPGA <-> CPLD) were considered when
+# computing the longest propagation delays. Propagation through the Board to
+# board connector is assumed shorter than the effect of having the edge
+# propagation time twice, as well as adding the two longest traces, instead of
+# the longest corresponding pair.
+#   Longest trace     | Trace length | Worst-case delay
+# MB: DB0_GPIO[19]    |    4.25 in   |   912 ps
+# DB: MB_FPGA_GPIO_A8 |    3.83 in   |   862 ps
+set db_gpio_board_max_delay 1.774
+
+# The shortest traces on the DB GPIO interface are (assuming 170.0 ps/in).
+# A similar consideration was made as for db_gpio_board_max_delay, but using
+# the shortest traces in each CCA.
+# In this case, edge propagation was not taken into account, as the trace delay
+# can act as the worst-case minimum.
+#   Shorted trace     | Trace length | Trace delay
+# MB: DB1_GPIO[8]     |    2.23 in   |   379 ps
+# DB: MB_FPGA_GPIO_B12|    2.57 in   |   436 ps
+set db_gpio_board_min_delay 0.815
+
+# DB and FPGA both use PLL reference clock from a common clock chip.
+# The common chip that drives these clocks is a LMK04832.
+# There exist two additional clock buffers within the trace taking the clock to
+# the daughterboard CPLD, a ADCLK944 located in the DB, and a MC100EPT23 near
+# the CPLD which takes care of level translation.
+# The largest delay that can exist between clocks exists when the LMK04832
+# presents its max skew between outputs and when all clock buffers present
+# their maximum delay.
+# MC100EPT23 propagation delays will be handled separately in constraints due
+# to their significant impact in timing closure, as well as to enable support
+# for various corner-cases.
+# Board delays were simulated in HyperLynx. Minimum delays considered time
+# between start of edge at the source to the start of edge at destination.
+# Maximum delays considered time between the start of an edge at the source and
+# the settling of the edge at destination. Corner cases were considered for IC
+# modeling.
+#
+# The clock path to the FPGA is composed by a single trace:
+# - Minimum clock propagation delay to FPGA = 815 ps.
+# - Maximum clock propagation delay to FPGA = 1.329 ps.
+#
+# The clock path to the CPLD (w/o MC100EPT23) is comprised by multiple traces:
+# - Path from MB LMK04832 to DB connector
+#       - Minimum delay : 1636 ps
+# - Path from DB Connector to DB ADCLK944
+#       - Minimum delay : 299 ps
+# - Path from DB ADCLK944 to CPLD:
+#       - Minimum delay : 197 ps
+#
+# The clock path to the CPLD (w/ MC100EPT23) is comprised of multiple traces:
+# - Path from MB LMK04832 to DB connector
+#       - Minimum delay : 1636 ps
+#       - Maximum delay : 1890 ps
+# - Path from DB Connector to DB ADCLK944
+#       - Minimum delay : 299 ps
+#       - Maximum delay : 397 ps
+# - Path from DB ADCLK944 to MC100EPT23:
+#       - Minimum delay : 120 ps
+#       - Maximum delay : 411 ps
+# - Path from MC100EPT23 to CPLD:
+#       - Minimum delay : 365 ps
+#       - Maximum delay : 847 ps
+#
+# The minimum and maximum delays for all traces can be added to account for the
+# total board delay to the CPLD:
+#
+#  Max total Board delay = 1890 + 397 + 411 + 847 = 3545 ps
+#
+#  Min total Board delay = 1636 + 299 + 197       = 2132 ps
+
+# This leaves the worst-case clock arrival values for the different ICs as:
+
+#   Max total Board delay + (Max LMK Skew) + (Max DB ADCLK Prop)
+#         3.545           +       .1       +      .130        = 3.775 ns,
+set db_cpld_prc_clock_prop_max  3.775
+
+#   Min total Board delay - (Max LMK Skew) + (Min DB ADCLK Prop)
+#         2.132           -       .1       +      .07         = 2.102 ns,
+set db_cpld_prc_clock_prop_min  2.102
+
+#   Board delay   + (Max LMK Skew)
+#       1.329     +      .1      =   1.429 ns
+set fpga_prc_clock_prop_max     1.429
+
+#   Board delay   - (Max LMK Skew)
+#       .815      -      .1      =   0.715 ns
+set fpga_prc_clock_prop_min     0.715
+
+# When combining these values, the LMK Skew will be accounted for twice,
+# which will just result in more conservative constraints.