aboutsummaryrefslogtreecommitdiffstats
path: root/usrp2
Commit message (Expand)AuthorAgeFilesLines
* duhMatt Ettus2010-11-041-1/+1
* allow for CS to rise before, at the same time, or after OEMatt Ettus2010-09-241-7/+6
* better debug pinsMatt Ettus2010-09-232-7/+11
* watch the ethernet chip select on our debug busMatt Ettus2010-09-233-6/+8
* fix timing issue on DAC outputs with rev 2. This puts the whole system on a ...Matt Ettus2010-09-212-50/+25
* send all gpmc signals to mictorMatt Ettus2010-09-164-0/+201
* updated pins to match rev2, removed dip switch, etc. seems to compile ok.Matt Ettus2010-09-093-137/+130
* pins are different on rev2Matt Ettus2010-09-091-264/+4
* fixed makefile to compile with our new systemMatt Ettus2010-09-071-44/+36
* add register to tell host about compatibility level and which image we are usingMatt Ettus2010-08-301-5/+14
* move declaration to make loopback compileMatt Ettus2010-08-271-1/+2
* Merge branch 'tx_policy' into u1eMatt Ettus2010-08-253-29/+23
|\
| * clean up DAC inversion and swapping to match schematicsMatt Ettus2010-08-251-3/+6
| * Clean up iq swapping on RX. It is now swapped in the top level.Matt Ettus2010-08-253-27/+18
| * Merge branch 'features' into tx_policyMatt Ettus2010-08-172-3/+6
| |\
| | * added compat number to usrp2 readback muxJosh Blum2010-08-091-2/+5
| | * makefile dependency fix for second expansionJosh Blum2010-08-091-1/+1
| * | rx error context packets should not be marked as errors in the fifoMatt Ettus2010-08-111-1/+1
| |/
| * provide a way to get out of the error state without processor interventionMatt Ettus2010-07-291-1/+4
| * sequence number reset upon programming streamidMatt Ettus2010-07-282-5/+11
| * attempt at avoiding infinite error messagesMatt Ettus2010-07-281-5/+14
| * implemented "next packet" and "next burst" policiesMatt Ettus2010-07-283-24/+50
| * sequence errors can happen on start of burst as well.Matt Ettus2010-07-281-1/+1
| * more informative error codesMatt Ettus2010-07-282-6/+8
| * cleaner error handlingMatt Ettus2010-07-281-27/+28
| * introduce new error typesMatt Ettus2010-07-283-34/+80
| * test mux and gen_context_pktMatt Ettus2010-07-281-3/+22
| * this is an output file, it shouldn't be checked inMatt Ettus2010-07-281-5506/+0
| * insert protocol engine flags when requestedMatt Ettus2010-07-281-2/+6
| * move the streamid so it isn't at the same address as clear_stateMatt Ettus2010-07-282-2/+2
| * connect the demuxMatt Ettus2010-07-281-1/+1
| * fix a typoMatt Ettus2010-07-283-4/+4
| * tx error packets now muxed into the ethernet stream back to the hostMatt Ettus2010-07-284-47/+66
| * checkpoint. New context packet generator to report underruns and other errorsMatt Ettus2010-07-282-0/+107
* | no need for protocol headers since we're not doing ethernetMatt Ettus2010-08-241-1/+1
* | match the signal names in this designMatt Ettus2010-08-231-3/+3
* | debug pins cleanupMatt Ettus2010-08-231-3/+3
* | properly integrate the new tx chainMatt Ettus2010-08-191-31/+27
* | catch up with tx_policyMatt Ettus2010-08-1911-5572/+311
* | attach run_tx and run_rx to ledsMatt Ettus2010-08-171-1/+1
* | connect atrMatt Ettus2010-08-171-1/+1
* | delay the q channel to make the channels line up on the AD9862Matt Ettus2010-08-171-1/+6
* | this is necessary for some reasonMatt Ettus2010-08-131-1/+2
* | connect the setting reg to the real clock and resetMatt Ettus2010-08-111-1/+1
* | enlarge loopback fifoMatt Ettus2010-08-101-4/+1
* | Merge branch 'ise12' into u1eMatt Ettus2010-07-199-45/+163
|\|
| * move declaration ahead of useMatt Ettus2010-07-191-5/+5
| * put run_tx and run_rx on the displayed LEDsMatt Ettus2010-07-191-3/+4
| * remove warningsMatt Ettus2010-07-162-3/+3
| * add mux and demux to buildMatt Ettus2010-07-151-0/+2