diff options
Diffstat (limited to 'usrp2/top/u2_rev3/u2_rev3.v')
| -rw-r--r-- | usrp2/top/u2_rev3/u2_rev3.v | 221 |
1 files changed, 127 insertions, 94 deletions
diff --git a/usrp2/top/u2_rev3/u2_rev3.v b/usrp2/top/u2_rev3/u2_rev3.v index 3a43e4ffe..8d9a18345 100644 --- a/usrp2/top/u2_rev3/u2_rev3.v +++ b/usrp2/top/u2_rev3/u2_rev3.v @@ -342,100 +342,133 @@ module u2_rev3 .S(0) // Synchronous preset input ); */ + + wire [17:0] RAM_D_pi; + wire [17:0] RAM_D_po; + wire RAM_D_poe; + + genvar i; + + // + // Instantiate IO for Bidirectional bus to SRAM + // + + generate + for (i=0;i<18;i=i+1) + begin : gen_RAM_D_IO + + IOBUF #( + .DRIVE(12), + .IOSTANDARD("LVCMOS25"), + .SLEW("FAST") + ) + RAM_D_i ( + .O(RAM_D_pi[i]), + .I(RAM_D_po[i]), + .IO(RAM_D[i]), + .T(RAM_D_poe) + ); + end // block: gen_RAM_D_IO + endgenerate + + + u2_core #(.RAM_SIZE(32768)) - u2_core(.dsp_clk (dsp_clk), - .wb_clk (wb_clk), - .clock_ready (clock_ready), - .clk_to_mac (clk_to_mac), - .pps_in (pps_in), - .leds (leds_int), - .debug (debug[31:0]), - .debug_clk (debug_clk[1:0]), - .exp_pps_in (exp_pps_in), - .exp_pps_out (exp_pps_out), - .GMII_COL (GMII_COL), - .GMII_CRS (GMII_CRS), - .GMII_TXD (GMII_TXD_unreg[7:0]), - .GMII_TX_EN (GMII_TX_EN_unreg), - .GMII_TX_ER (GMII_TX_ER_unreg), - .GMII_GTX_CLK (GMII_GTX_CLK_int), - .GMII_TX_CLK (GMII_TX_CLK), - .GMII_RXD (GMII_RXD[7:0]), - .GMII_RX_CLK (GMII_RX_CLK), - .GMII_RX_DV (GMII_RX_DV), - .GMII_RX_ER (GMII_RX_ER), - .MDIO (MDIO), - .MDC (MDC), - .PHY_INTn (PHY_INTn), - .PHY_RESETn (PHY_RESETn), - .ser_enable (ser_enable), - .ser_prbsen (ser_prbsen), - .ser_loopen (ser_loopen), - .ser_rx_en (ser_rx_en), - .ser_tx_clk (ser_tx_clk_int), - .ser_t (ser_t_unreg[15:0]), - .ser_tklsb (ser_tklsb_unreg), - .ser_tkmsb (ser_tkmsb_unreg), - .ser_rx_clk (ser_rx_clk_buf), - .ser_r (ser_r_int[15:0]), - .ser_rklsb (ser_rklsb_int), - .ser_rkmsb (ser_rkmsb_int), - .cpld_start (cpld_start), - .cpld_mode (cpld_mode), - .cpld_done (cpld_done), - .cpld_din (cpld_din), - .cpld_clk (cpld_clk), - .cpld_detached (cpld_detached), - .cpld_misc (cpld_misc), - .cpld_init_b (cpld_init_b), - .por (~POR), - .config_success (config_success), - .adc_a (adc_a_reg2), - .adc_ovf_a (adc_ovf_a_reg2), - .adc_on_a (adc_on_a), - .adc_oe_a (adc_oe_a), - .adc_b (adc_b_reg2), - .adc_ovf_b (adc_ovf_b_reg2), - .adc_on_b (adc_on_b), - .adc_oe_b (adc_oe_b), - .dac_a (dac_a_int), - .dac_b (dac_b_int), - .scl_pad_i (scl_pad_i), - .scl_pad_o (scl_pad_o), - .scl_pad_oen_o (scl_pad_oen_o), - .sda_pad_i (sda_pad_i), - .sda_pad_o (sda_pad_o), - .sda_pad_oen_o (sda_pad_oen_o), - .clk_en (clk_en[1:0]), - .clk_sel (clk_sel[1:0]), - .clk_func (clk_func), - .clk_status (clk_status), - .sclk (sclk_int), - .mosi (mosi), - .miso (miso), - .sen_clk (sen_clk), - .sen_dac (sen_dac), - .sen_tx_db (sen_tx_db), - .sen_tx_adc (sen_tx_adc), - .sen_tx_dac (sen_tx_dac), - .sen_rx_db (sen_rx_db), - .sen_rx_adc (sen_rx_adc), - .sen_rx_dac (sen_rx_dac), - .io_tx (io_tx[15:0]), - .io_rx (io_rx[15:0]), - .RAM_D (RAM_D), - .RAM_A (RAM_A), - .RAM_CE1n (RAM_CE1n), - .RAM_CENn (RAM_CENn), - .RAM_CLK (RAM_CLK), - .RAM_WEn (RAM_WEn), - .RAM_OEn (RAM_OEn), - .RAM_LDn (RAM_LDn), - .uart_tx_o (uart_tx_o), - .uart_rx_i (uart_rx_i), - .uart_baud_o (), - .sim_mode (1'b0), - .clock_divider (2) - ); + u2_core(.dsp_clk (dsp_clk), + .wb_clk (wb_clk), + .clock_ready (clock_ready), + .clk_to_mac (clk_to_mac), + .pps_in (pps_in), + .leds (leds_int), + .debug (debug[31:0]), + .debug_clk (debug_clk[1:0]), + .exp_pps_in (exp_pps_in), + .exp_pps_out (exp_pps_out), + .GMII_COL (GMII_COL), + .GMII_CRS (GMII_CRS), + .GMII_TXD (GMII_TXD_unreg[7:0]), + .GMII_TX_EN (GMII_TX_EN_unreg), + .GMII_TX_ER (GMII_TX_ER_unreg), + .GMII_GTX_CLK (GMII_GTX_CLK_int), + .GMII_TX_CLK (GMII_TX_CLK), + .GMII_RXD (GMII_RXD[7:0]), + .GMII_RX_CLK (GMII_RX_CLK), + .GMII_RX_DV (GMII_RX_DV), + .GMII_RX_ER (GMII_RX_ER), + .MDIO (MDIO), + .MDC (MDC), + .PHY_INTn (PHY_INTn), + .PHY_RESETn (PHY_RESETn), + .ser_enable (ser_enable), + .ser_prbsen (ser_prbsen), + .ser_loopen (ser_loopen), + .ser_rx_en (ser_rx_en), + .ser_tx_clk (ser_tx_clk_int), + .ser_t (ser_t_unreg[15:0]), + .ser_tklsb (ser_tklsb_unreg), + .ser_tkmsb (ser_tkmsb_unreg), + .ser_rx_clk (ser_rx_clk_buf), + .ser_r (ser_r_int[15:0]), + .ser_rklsb (ser_rklsb_int), + .ser_rkmsb (ser_rkmsb_int), + .cpld_start (cpld_start), + .cpld_mode (cpld_mode), + .cpld_done (cpld_done), + .cpld_din (cpld_din), + .cpld_clk (cpld_clk), + .cpld_detached (cpld_detached), + .cpld_misc (cpld_misc), + .cpld_init_b (cpld_init_b), + .por (~POR), + .config_success (config_success), + .adc_a (adc_a_reg2), + .adc_ovf_a (adc_ovf_a_reg2), + .adc_on_a (adc_on_a), + .adc_oe_a (adc_oe_a), + .adc_b (adc_b_reg2), + .adc_ovf_b (adc_ovf_b_reg2), + .adc_on_b (adc_on_b), + .adc_oe_b (adc_oe_b), + .dac_a (dac_a_int), + .dac_b (dac_b_int), + .scl_pad_i (scl_pad_i), + .scl_pad_o (scl_pad_o), + .scl_pad_oen_o (scl_pad_oen_o), + .sda_pad_i (sda_pad_i), + .sda_pad_o (sda_pad_o), + .sda_pad_oen_o (sda_pad_oen_o), + .clk_en (clk_en[1:0]), + .clk_sel (clk_sel[1:0]), + .clk_func (clk_func), + .clk_status (clk_status), + .sclk (sclk_int), + .mosi (mosi), + .miso (miso), + .sen_clk (sen_clk), + .sen_dac (sen_dac), + .sen_tx_db (sen_tx_db), + .sen_tx_adc (sen_tx_adc), + .sen_tx_dac (sen_tx_dac), + .sen_rx_db (sen_rx_db), + .sen_rx_adc (sen_rx_adc), + .sen_rx_dac (sen_rx_dac), + .io_tx (io_tx[15:0]), + .io_rx (io_rx[15:0]), + .RAM_D_pi (RAM_D_pi), + .RAM_D_po (RAM_D_po), + .RAM_D_poe (RAM_D_poe), + .RAM_A (RAM_A), + .RAM_CE1n (RAM_CE1n), + .RAM_CENn (RAM_CENn), + .RAM_CLK (RAM_CLK), + .RAM_WEn (RAM_WEn), + .RAM_OEn (RAM_OEn), + .RAM_LDn (RAM_LDn), + .uart_tx_o (uart_tx_o), + .uart_rx_i (uart_rx_i), + .uart_baud_o (), + .sim_mode (1'b0), + .clock_divider (2) + ); endmodule // u2_rev2 |