1 files changed, 0 insertions, 35 deletions
diff --git a/fpga/usrp3/lib/control/setting_reg.v b/fpga/usrp3/lib/control/setting_reg.v
deleted file mode 100644
index 1664f54e2..000000000
--- a/fpga/usrp3/lib/control/setting_reg.v
+++ /dev/null
@@ -1,35 +0,0 @@
-//
-// Copyright 2011-2012 Ettus Research LLC
-//
-
-
-//----------------------------------------------------------------------
-//-- A settings register is a peripheral for the settings register bus.
-//-- When the settings register sees strobe abd a matching address,
-//-- the outputs will be become registered to the given input bus.
-//----------------------------------------------------------------------
-
-module setting_reg
-  #(parameter my_addr = 0, 
-    parameter awidth = 8,
-    parameter width = 32,
-    parameter at_reset=0)
-    (input clk, input rst, input strobe, input wire [awidth-1:0] addr,
-     input wire [31:0] in, output reg [width-1:0] out, output reg changed);
-   
-   always @(posedge clk)
-     if(rst)
-       begin
-	  out <= at_reset;
-	  changed <= 1'b0;
-       end
-     else
-       if(strobe & (my_addr==addr))
-	 begin
-	    out <= in[width-1:0];
-	    changed <= 1'b1;
-	 end
-       else
-	 changed <= 1'b0;
-   
-endmodule // setting_reg