usrp3: Added new GPIO ATR 3000 core

- Refactored GPIO ATR definitions
- Added new 3000 core with a more efficient API
- Added a separate db_gpio_atr core to control the ATR bus
- Ported b2xx, e3xx and x3xx to the new core
- Minor cleanup

1 files changed, 8 insertions, 8 deletions

diff --git a/host/lib/usrp/dboard/db_sbx_common.cpp b/host/lib/usrp/dboard/db_sbx_common.cpp
index ce5166c4c..d5d55dd17 100644
--- a/host/lib/usrp/dboard/db_sbx_common.cpp
+++ b/host/lib/usrp/dboard/db_sbx_common.cpp
@@ -265,39 +265,39 @@ void sbx_xcvr::update_atr(void){
 
     //setup the tx atr (this does not change with antenna)
     this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
-            dboard_iface::ATR_REG_IDLE, 0 | tx_lo_lpf_en \
+            gpio_atr::ATR_REG_IDLE, 0 | tx_lo_lpf_en \
             | tx_ld_led | tx_ant_led | TX_POWER_UP | ANT_XX | TX_MIXER_DIS);
 
     //setup the rx atr (this does not change with antenna)
     this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
-            dboard_iface::ATR_REG_IDLE, rx_pga0_iobits | rx_lo_lpf_en \
+            gpio_atr::ATR_REG_IDLE, rx_pga0_iobits | rx_lo_lpf_en \
             | rx_ld_led | rx_ant_led | RX_POWER_UP | ANT_XX | RX_MIXER_DIS);
 
     //set the RX atr regs that change with antenna setting
     this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
-            dboard_iface::ATR_REG_RX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \
+            gpio_atr::ATR_REG_RX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \
             | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_ENB \
             | ((_rx_ant != "RX2")? ANT_TXRX : ANT_RX2));
     this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
-            dboard_iface::ATR_REG_TX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \
+            gpio_atr::ATR_REG_TX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \
             | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_DIS \
             | ((_rx_ant == "CAL")? ANT_TXRX : ANT_RX2));
     this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
-            dboard_iface::ATR_REG_FULL_DUPLEX, rx_pga0_iobits | rx_lo_lpf_en \
+            gpio_atr::ATR_REG_FULL_DUPLEX, rx_pga0_iobits | rx_lo_lpf_en \
             | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_ENB \
             | ((_rx_ant == "CAL")? ANT_TXRX : ANT_RX2));
 
     //set the TX atr regs that change with antenna setting
     this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
-            dboard_iface::ATR_REG_RX_ONLY, 0 | tx_lo_lpf_en \
+            gpio_atr::ATR_REG_RX_ONLY, 0 | tx_lo_lpf_en \
             | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_DIS \
             | ((_rx_ant != "RX2")? ANT_RX : ANT_TX));
     this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
-            dboard_iface::ATR_REG_TX_ONLY, tx_pga0_iobits | tx_lo_lpf_en \
+            gpio_atr::ATR_REG_TX_ONLY, tx_pga0_iobits | tx_lo_lpf_en \
             | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_ENB \
             | ((_tx_ant == "CAL")? ANT_RX : ANT_TX));
     this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
-            dboard_iface::ATR_REG_FULL_DUPLEX, tx_pga0_iobits | tx_lo_lpf_en \
+            gpio_atr::ATR_REG_FULL_DUPLEX, tx_pga0_iobits | tx_lo_lpf_en \
             | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_ENB \
             | ((_tx_ant == "CAL")? ANT_RX : ANT_TX));
 }