usrp3: Added new GPIO ATR 3000 core

- Refactored GPIO ATR definitions
- Added new 3000 core with a more efficient API
- Added a separate db_gpio_atr core to control the ATR bus
- Ported b2xx, e3xx and x3xx to the new core
- Minor cleanup

24 files changed, 620 insertions, 275 deletions

diff --git a/host/include/uhd/usrp/dboard_iface.hpp b/host/include/uhd/usrp/dboard_iface.hpp
index f8f318a40..c3a3a4e00 100644
--- a/host/include/uhd/usrp/dboard_iface.hpp
+++ b/host/include/uhd/usrp/dboard_iface.hpp
@@ -22,6 +22,7 @@
 #include <uhd/utils/pimpl.hpp>
 #include <uhd/types/serial.hpp>
 #include <uhd/types/time_spec.hpp>
+#include <uhd/usrp/gpio_defs.hpp>
 #include <boost/shared_ptr.hpp>
 #include <boost/cstdint.hpp>
 #include <string>
@@ -67,14 +68,6 @@ public:
         UNIT_TX = int('t')
     };
 
-    //! possible atr registers
-    enum atr_reg_t{
-        ATR_REG_IDLE        = int('i'),
-        ATR_REG_TX_ONLY     = int('t'),
-        ATR_REG_RX_ONLY     = int('r'),
-        ATR_REG_FULL_DUPLEX = int('f')
-    };
-
     //! aux dac selection enums (per unit)
     enum aux_dac_t{
         AUX_DAC_A = int('a'),
@@ -89,6 +82,8 @@ public:
         AUX_ADC_B = int('b')
     };
 
+    typedef uhd::usrp::gpio_atr::gpio_atr_reg_t atr_reg_t;
+
     /*!
      * Get special properties information for this dboard slot.
      * This call helps the dboard code to handle implementation
diff --git a/host/include/uhd/usrp/gpio_defs.hpp b/host/include/uhd/usrp/gpio_defs.hpp
new file mode 100644
index 000000000..c32f22f28
--- /dev/null
+++ b/host/include/uhd/usrp/gpio_defs.hpp
@@ -0,0 +1,70 @@
+//
+// Copyright 2011,2014,2015 Ettus Research LLC
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program.  If not, see <http://www.gnu.org/licenses/>.
+//
+
+#ifndef INCLUDED_LIBUHD_USRP_GPIO_DEFS_HPP
+#define INCLUDED_LIBUHD_USRP_GPIO_DEFS_HPP
+
+#include <uhd/config.hpp>
+#include <boost/assign.hpp>
+#include <boost/utility.hpp>
+#include <map>
+
+namespace uhd { namespace usrp { namespace gpio_atr {
+
+enum gpio_atr_reg_t {
+    ATR_REG_IDLE        = int('i'),
+    ATR_REG_TX_ONLY     = int('t'),
+    ATR_REG_RX_ONLY     = int('r'),
+    ATR_REG_FULL_DUPLEX = int('f')
+};
+
+enum gpio_atr_mode_t {
+    MODE_ATR  = 0,   //Output driven by the auto-transmit-receive engine
+    MODE_GPIO = 1    //Output value is static
+};
+
+enum gpio_ddr_t {
+    DDR_INPUT   = 0,
+    DDR_OUTPUT  = 1
+};
+
+enum gpio_attr_t {
+    GPIO_CTRL,
+    GPIO_DDR,
+    GPIO_OUT,
+    GPIO_ATR_0X,
+    GPIO_ATR_RX,
+    GPIO_ATR_TX,
+    GPIO_ATR_XX
+};
+
+typedef std::map<gpio_attr_t, std::string> gpio_attr_map_t;
+
+static const gpio_attr_map_t gpio_attr_map =
+    boost::assign::map_list_of
+        (GPIO_CTRL,   "CTRL")
+        (GPIO_DDR,    "DDR")
+        (GPIO_OUT,    "OUT")
+        (GPIO_ATR_0X, "ATR_0X")
+        (GPIO_ATR_RX, "ATR_RX")
+        (GPIO_ATR_TX, "ATR_TX")
+        (GPIO_ATR_XX, "ATR_XX")
+;
+
+}}} //namespaces
+
+#endif /* INCLUDED_LIBUHD_USRP_GPIO_DEFS_HPP */
diff --git a/host/include/uhd/utils/soft_register.hpp b/host/include/uhd/utils/soft_register.hpp
index a2c34a4ec..665876e73 100644
--- a/host/include/uhd/utils/soft_register.hpp
+++ b/host/include/uhd/utils/soft_register.hpp
@@ -223,7 +223,7 @@ public:
                 _soft_copy.mark_clean();
             }
         } else {
-            throw uhd::not_implemented_error("soft_register is not writable.");
+            throw uhd::not_implemented_error("soft_register is not writable or uninitialized.");
         }
     }
 
@@ -244,7 +244,7 @@ public:
             }
             _soft_copy.mark_clean();
         } else {
-            throw uhd::not_implemented_error("soft_register is not readable.");
+            throw uhd::not_implemented_error("soft_register is not readable or uninitialized.");
         }
     }
 
diff --git a/host/lib/usrp/b200/b200_impl.cpp b/host/lib/usrp/b200/b200_impl.cpp
index 1d102c7f0..360dc39b9 100644
--- a/host/lib/usrp/b200/b200_impl.cpp
+++ b/host/lib/usrp/b200/b200_impl.cpp
@@ -41,6 +41,7 @@
 
 using namespace uhd;
 using namespace uhd::usrp;
+using namespace uhd::usrp::gpio_atr;
 using namespace uhd::transport;
 
 static const boost::posix_time::milliseconds REENUMERATION_TIMEOUT_MS(3000);
@@ -656,15 +657,15 @@ b200_impl::b200_impl(const uhd::device_addr_t& device_addr, usb_device_handle::s
     ////////////////////////////////////////////////////////////////////
     // front panel gpio
     ////////////////////////////////////////////////////////////////////
-    _radio_perifs[0].fp_gpio = gpio_core_200::make(_radio_perifs[0].ctrl, TOREG(SR_FP_GPIO), RB32_FP_GPIO);
+    _radio_perifs[0].fp_gpio = gpio_atr_3000::make(_radio_perifs[0].ctrl, TOREG(SR_FP_GPIO), RB32_FP_GPIO);
     BOOST_FOREACH(const gpio_attr_map_t::value_type attr, gpio_attr_map)
     {
             _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / attr.second)
             .set(0)
-            .subscribe(boost::bind(&b200_impl::set_fp_gpio, this, _radio_perifs[0].fp_gpio, attr.first, _1));
+            .subscribe(boost::bind(&gpio_atr_3000::set_gpio_attr, _radio_perifs[0].fp_gpio, attr.first, _1));
     }
     _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / "READBACK")
-        .publish(boost::bind(&b200_impl::get_fp_gpio, this, _radio_perifs[0].fp_gpio));
+        .publish(boost::bind(&gpio_atr_3000::read_gpio, _radio_perifs[0].fp_gpio));
 
     ////////////////////////////////////////////////////////////////////
     // dboard eeproms but not really
@@ -751,7 +752,8 @@ void b200_impl::setup_radio(const size_t dspno)
     ////////////////////////////////////////////////////////////////////
     // Set up peripherals
     ////////////////////////////////////////////////////////////////////
-    perif.atr = gpio_core_200_32wo::make(perif.ctrl, TOREG(SR_ATR));
+    perif.atr = gpio_atr_3000::make_write_only(perif.ctrl, TOREG(SR_ATR));
+    perif.atr->set_atr_mode(MODE_ATR, 0xFFFFFFFF);
     // create rx dsp control objects
     perif.framer = rx_vita_core_3000::make(perif.ctrl, TOREG(SR_RX_CTRL));
     perif.ddc = rx_dsp_core_3000::make(perif.ctrl, TOREG(SR_RX_DSP), true /*is_b200?*/);
@@ -962,27 +964,6 @@ void b200_impl::set_mb_eeprom(const uhd::usrp::mboard_eeprom_t &mb_eeprom)
     mb_eeprom.commit(*_iface, "B200");
 }
 
-
-boost::uint32_t b200_impl::get_fp_gpio(gpio_core_200::sptr gpio)
-{
-    return boost::uint32_t(gpio->read_gpio(dboard_iface::UNIT_RX));
-}
-
-void b200_impl::set_fp_gpio(gpio_core_200::sptr gpio, const gpio_attr_t attr, const boost::uint32_t value)
-{
-    switch (attr)
-    {
-    case GPIO_CTRL:   return gpio->set_pin_ctrl(dboard_iface::UNIT_RX, value);
-    case GPIO_DDR:    return gpio->set_gpio_ddr(dboard_iface::UNIT_RX, value);
-    case GPIO_OUT:    return gpio->set_gpio_out(dboard_iface::UNIT_RX, value);
-    case GPIO_ATR_0X: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, value);
-    case GPIO_ATR_RX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, value);
-    case GPIO_ATR_TX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, value);
-    case GPIO_ATR_XX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, value);
-    default:        UHD_THROW_INVALID_CODE_PATH();
-    }
-}
-
 /***********************************************************************
  * Reference time and clock
  **********************************************************************/
@@ -1152,11 +1133,11 @@ void b200_impl::update_atrs(void)
         if (enb_rx and enb_tx) fd = STATE_FDX1_TXRX;
         if (enb_rx and not enb_tx) fd = rxonly;
         if (not enb_rx and enb_tx) fd = txonly;
-        gpio_core_200_32wo::sptr atr = perif.atr;
-        atr->set_atr_reg(dboard_iface::ATR_REG_IDLE, STATE_OFF);
-        atr->set_atr_reg(dboard_iface::ATR_REG_RX_ONLY, rxonly);
-        atr->set_atr_reg(dboard_iface::ATR_REG_TX_ONLY, txonly);
-        atr->set_atr_reg(dboard_iface::ATR_REG_FULL_DUPLEX, fd);
+        gpio_atr_3000::sptr atr = perif.atr;
+        atr->set_atr_reg(ATR_REG_IDLE, STATE_OFF);
+        atr->set_atr_reg(ATR_REG_RX_ONLY, rxonly);
+        atr->set_atr_reg(ATR_REG_TX_ONLY, txonly);
+        atr->set_atr_reg(ATR_REG_FULL_DUPLEX, fd);
     }
     if (_radio_perifs.size() > _fe2 and _radio_perifs[_fe2].atr)
     {
@@ -1170,11 +1151,11 @@ void b200_impl::update_atrs(void)
         if (enb_rx and enb_tx) fd = STATE_FDX2_TXRX;
         if (enb_rx and not enb_tx) fd = rxonly;
         if (not enb_rx and enb_tx) fd = txonly;
-        gpio_core_200_32wo::sptr atr = perif.atr;
-        atr->set_atr_reg(dboard_iface::ATR_REG_IDLE, STATE_OFF);
-        atr->set_atr_reg(dboard_iface::ATR_REG_RX_ONLY, rxonly);
-        atr->set_atr_reg(dboard_iface::ATR_REG_TX_ONLY, txonly);
-        atr->set_atr_reg(dboard_iface::ATR_REG_FULL_DUPLEX, fd);
+        gpio_atr_3000::sptr atr = perif.atr;
+        atr->set_atr_reg(ATR_REG_IDLE, STATE_OFF);
+        atr->set_atr_reg(ATR_REG_RX_ONLY, rxonly);
+        atr->set_atr_reg(ATR_REG_TX_ONLY, txonly);
+        atr->set_atr_reg(ATR_REG_FULL_DUPLEX, fd);
     }
 }
 
diff --git a/host/lib/usrp/b200/b200_impl.hpp b/host/lib/usrp/b200/b200_impl.hpp
index 25fef7d4b..b05f81a36 100644
--- a/host/lib/usrp/b200/b200_impl.hpp
+++ b/host/lib/usrp/b200/b200_impl.hpp
@@ -27,7 +27,7 @@
 #include "rx_vita_core_3000.hpp"
 #include "tx_vita_core_3000.hpp"
 #include "time_core_3000.hpp"
-#include "gpio_core_200.hpp"
+#include "gpio_atr_3000.hpp"
 #include "radio_ctrl_core_3000.hpp"
 #include "rx_dsp_core_3000.hpp"
 #include "tx_dsp_core_3000.hpp"
@@ -177,8 +177,8 @@ private:
     struct radio_perifs_t
     {
         radio_ctrl_core_3000::sptr ctrl;
-        gpio_core_200_32wo::sptr atr;
-        gpio_core_200::sptr fp_gpio;
+        uhd::usrp::gpio_atr::gpio_atr_3000::sptr atr;
+        uhd::usrp::gpio_atr::gpio_atr_3000::sptr fp_gpio;
         time_core_3000::sptr time64;
         rx_vita_core_3000::sptr framer;
         rx_dsp_core_3000::sptr ddc;
@@ -226,9 +226,6 @@ private:
     void update_enables(void);
     void update_atrs(void);
 
-    boost::uint32_t get_fp_gpio(gpio_core_200::sptr);
-    void set_fp_gpio(gpio_core_200::sptr, const gpio_attr_t, const boost::uint32_t);
-
     double _tick_rate;
     double get_tick_rate(void){return _tick_rate;}
     double set_tick_rate(const double rate);
diff --git a/host/lib/usrp/cores/CMakeLists.txt b/host/lib/usrp/cores/CMakeLists.txt
index f28ae040f..909c02941 100644
--- a/host/lib/usrp/cores/CMakeLists.txt
+++ b/host/lib/usrp/cores/CMakeLists.txt
@@ -40,4 +40,5 @@ LIBUHD_APPEND_SOURCES(
     ${CMAKE_CURRENT_SOURCE_DIR}/rx_dsp_core_3000.cpp
     ${CMAKE_CURRENT_SOURCE_DIR}/tx_dsp_core_3000.cpp
     ${CMAKE_CURRENT_SOURCE_DIR}/radio_ctrl_core_3000.cpp
+    ${CMAKE_CURRENT_SOURCE_DIR}/gpio_atr_3000.cpp
 )
diff --git a/host/lib/usrp/cores/gpio_atr_3000.cpp b/host/lib/usrp/cores/gpio_atr_3000.cpp
new file mode 100644
index 000000000..d067dc590
--- /dev/null
+++ b/host/lib/usrp/cores/gpio_atr_3000.cpp
@@ -0,0 +1,214 @@
+//
+// Copyright 2011,2014 Ettus Research LLC
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program.  If not, see <http://www.gnu.org/licenses/>.
+//
+
+#include "gpio_atr_3000.hpp"
+#include <uhd/types/dict.hpp>
+#include <uhd/utils/soft_register.hpp>
+
+using namespace uhd;
+using namespace usrp;
+
+//-------------------------------------------------------------
+// gpio_atr_3000
+//-------------------------------------------------------------
+
+#define REG_ATR_IDLE_OFFSET     (base + 0)
+#define REG_ATR_RX_OFFSET       (base + 4)
+#define REG_ATR_TX_OFFSET       (base + 8)
+#define REG_ATR_FDX_OFFSET      (base + 12)
+#define REG_DDR_OFFSET          (base + 16)
+#define REG_ATR_DISABLE_OFFSET  (base + 20)
+
+namespace uhd { namespace usrp { namespace gpio_atr {
+
+class gpio_atr_3000_impl : public gpio_atr_3000{
+public:
+    gpio_atr_3000_impl(
+        wb_iface::sptr iface,
+        const wb_iface::wb_addr_type base,
+        const wb_iface::wb_addr_type rb_addr = 0xFFFFFFFF
+    ):
+        _iface(iface), _rb_addr(rb_addr),
+        _atr_idle_reg(REG_ATR_IDLE_OFFSET),
+        _atr_rx_reg(REG_ATR_RX_OFFSET),
+        _atr_tx_reg(REG_ATR_TX_OFFSET),
+        _atr_fdx_reg(REG_ATR_FDX_OFFSET),
+        _ddr_reg(REG_DDR_OFFSET),
+        _atr_disable_reg(REG_ATR_DISABLE_OFFSET)
+    {
+        _atr_idle_reg.initialize(*_iface, true);
+        _atr_rx_reg.initialize(*_iface, true);
+        _atr_tx_reg.initialize(*_iface, true);
+        _atr_fdx_reg.initialize(*_iface, true);
+        _ddr_reg.initialize(*_iface, true);
+        _atr_disable_reg.initialize(*_iface, true);
+    }
+
+    virtual void set_atr_mode(const gpio_atr_mode_t mode, const boost::uint32_t mask)
+    {
+        _atr_disable_reg.set_with_mask((mode==MODE_ATR)?0:0xFFFFFFFF, mask);
+        _atr_disable_reg.flush();
+    }
+
+    virtual void set_gpio_ddr(const gpio_ddr_t dir, const boost::uint32_t mask)
+    {
+        _ddr_reg.set_with_mask((dir==DDR_INPUT)?0:0xFFFFFFFF, mask);
+        _ddr_reg.flush();
+    }
+
+    virtual void set_atr_reg(const gpio_atr_reg_t atr, const boost::uint32_t value, const boost::uint32_t mask)
+    {
+        masked_reg_t* reg = NULL;
+        switch (atr) {
+            case ATR_REG_IDLE:          reg = &_atr_idle_reg; break;
+            case ATR_REG_RX_ONLY:       reg = &_atr_rx_reg;   break;
+            case ATR_REG_TX_ONLY:       reg = &_atr_tx_reg;   break;
+            case ATR_REG_FULL_DUPLEX:   reg = &_atr_fdx_reg;  break;
+            default:                    reg = &_atr_idle_reg; break;
+        }
+        reg->set_with_mask(value, mask);
+        reg->flush();
+    }
+
+    virtual boost::uint32_t read_gpio()
+    {
+        if (_rb_addr != 0xFFFFFFFF) {
+            return _iface->peek32(_rb_addr);
+        } else {
+            throw uhd::runtime_error("read_gpio not supported for write-only interface.");
+        }
+    }
+
+    virtual void set_gpio_attr(const gpio_attr_t attr, const boost::uint32_t value)
+    {
+        switch (attr)
+        {
+        case GPIO_CTRL:
+            set_atr_mode(MODE_ATR, value);
+            set_atr_mode(MODE_GPIO, ~value);
+            break;
+        case GPIO_DDR:
+            set_gpio_ddr(DDR_OUTPUT, value);
+            set_gpio_ddr(DDR_INPUT, ~value);
+            break;
+        case GPIO_OUT:
+            set_atr_reg(ATR_REG_IDLE, value, _atr_disable_reg.get(masked_reg_t::REGISTER));
+            break;
+        case GPIO_ATR_0X:
+            set_atr_reg(ATR_REG_IDLE, value, ~_atr_disable_reg.get(masked_reg_t::REGISTER));
+            break;
+        case GPIO_ATR_RX:
+            set_atr_reg(ATR_REG_RX_ONLY, value, ~_atr_disable_reg.get(masked_reg_t::REGISTER));
+            break;
+        case GPIO_ATR_TX:
+            set_atr_reg(ATR_REG_TX_ONLY, value, ~_atr_disable_reg.get(masked_reg_t::REGISTER));
+            break;
+        case GPIO_ATR_XX:
+            set_atr_reg(ATR_REG_FULL_DUPLEX, value, ~_atr_disable_reg.get(masked_reg_t::REGISTER));
+            break;
+        default:
+            UHD_THROW_INVALID_CODE_PATH();
+        }
+    }
+
+protected:
+    class masked_reg_t : public uhd::soft_reg32_wo_t {
+    public:
+        masked_reg_t(const wb_iface::wb_addr_type offset): uhd::soft_reg32_wo_t(offset) {
+            set(REGISTER, 0);
+        }
+
+        inline void set_with_mask(const boost::uint32_t value, const boost::uint32_t mask) {
+            set(REGISTER, (value&mask)|(get(REGISTER)&(~mask)));
+        }
+    };
+
+    wb_iface::sptr          _iface;
+    wb_iface::wb_addr_type  _rb_addr;
+    masked_reg_t            _atr_idle_reg;
+    masked_reg_t            _atr_rx_reg;
+    masked_reg_t            _atr_tx_reg;
+    masked_reg_t            _atr_fdx_reg;
+    masked_reg_t            _ddr_reg;
+    masked_reg_t            _atr_disable_reg;
+};
+
+gpio_atr_3000::sptr gpio_atr_3000::make(wb_iface::sptr iface, const size_t base, const size_t rb_addr) {
+    return sptr(new gpio_atr_3000_impl(iface, base, rb_addr));
+}
+
+gpio_atr_3000::sptr gpio_atr_3000::make_write_only(wb_iface::sptr iface, const size_t base) {
+    gpio_atr_3000::sptr gpio_iface(new gpio_atr_3000_impl(iface, base));
+    gpio_iface->set_gpio_ddr(DDR_OUTPUT, 0xFFFFFFFF);
+    return gpio_iface;
+}
+
+//-------------------------------------------------------------
+// db_gpio_atr_3000
+//-------------------------------------------------------------
+
+class db_gpio_atr_3000_impl : public gpio_atr_3000_impl, public db_gpio_atr_3000 {
+public:
+    db_gpio_atr_3000_impl(wb_iface::sptr iface, const wb_iface::wb_addr_type base, const wb_iface::wb_addr_type rb_addr):
+        gpio_atr_3000_impl(iface, base, rb_addr) { /* NOP */ }
+
+    inline void set_pin_ctrl(const db_unit_t unit, const boost::uint16_t value)
+    {
+        gpio_atr_3000_impl::set_atr_mode(MODE_ATR,  compute_mask(unit, value));
+        gpio_atr_3000_impl::set_atr_mode(MODE_GPIO, compute_mask(unit, ~value));
+    }
+
+    inline void set_gpio_ddr(const db_unit_t unit, const boost::uint16_t value)
+    {
+        gpio_atr_3000_impl::set_gpio_ddr(DDR_OUTPUT, compute_mask(unit, value));
+        gpio_atr_3000_impl::set_gpio_ddr(DDR_INPUT,  compute_mask(unit, ~value));
+    }
+
+    inline void set_atr_reg(const db_unit_t unit, const gpio_atr_reg_t atr, const boost::uint16_t value)
+    {
+        gpio_atr_3000_impl::set_atr_reg(atr,
+            static_cast<boost::uint32_t>(value) << compute_shift(unit),
+            compute_mask(unit, ~(_atr_disable_reg.get(masked_reg_t::REGISTER))));
+    }
+
+    inline void set_gpio_out(const db_unit_t unit, const boost::uint16_t value)
+    {
+        gpio_atr_3000_impl::set_atr_reg(ATR_REG_IDLE,
+            static_cast<boost::uint32_t>(value) << compute_shift(unit),
+            compute_mask(unit, _atr_disable_reg.get(masked_reg_t::REGISTER)));
+    }
+
+    inline boost::uint16_t read_gpio(const db_unit_t unit)
+    {
+        return boost::uint16_t(gpio_atr_3000_impl::read_gpio() >> compute_shift(unit));
+    }
+
+private:
+    inline boost::uint32_t compute_shift(const db_unit_t unit) {
+        return (unit == dboard_iface::UNIT_RX) ? 0 : 16;
+    }
+
+    inline boost::uint32_t compute_mask(const db_unit_t unit, const boost::uint16_t mask) {
+        return static_cast<boost::uint32_t>(mask) << (compute_shift(unit));
+    }
+};
+
+db_gpio_atr_3000::sptr db_gpio_atr_3000::make(wb_iface::sptr iface, const size_t base, const size_t rb_addr) {
+    return sptr(new db_gpio_atr_3000_impl(iface, base, rb_addr));
+}
+
+}}}
diff --git a/host/lib/usrp/cores/gpio_atr_3000.hpp b/host/lib/usrp/cores/gpio_atr_3000.hpp
new file mode 100644
index 000000000..b9e5168d9
--- /dev/null
+++ b/host/lib/usrp/cores/gpio_atr_3000.hpp
@@ -0,0 +1,168 @@
+//
+// Copyright 2011,2014,2015 Ettus Research LLC
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program.  If not, see <http://www.gnu.org/licenses/>.
+//
+
+#ifndef INCLUDED_LIBUHD_USRP_GPIO_CORE_3000_HPP
+#define INCLUDED_LIBUHD_USRP_GPIO_CORE_3000_HPP
+
+#include <uhd/config.hpp>
+#include <uhd/usrp/dboard_iface.hpp>
+#include <uhd/usrp/gpio_defs.hpp>
+#include <boost/shared_ptr.hpp>
+#include <uhd/types/wb_iface.hpp>
+
+namespace uhd { namespace usrp { namespace gpio_atr {
+
+class gpio_atr_3000 : boost::noncopyable {
+public:
+    typedef boost::shared_ptr<gpio_atr_3000> sptr;
+
+    virtual ~gpio_atr_3000(void) {};
+
+    /*!
+     * Create a read-write GPIO ATR interface object
+     *
+     * \param iface register iface to GPIO ATR registers
+     * \param base base settings offset for GPIO ATR registers
+     * \param base readback offset for GPIO ATR registers
+     */
+    static sptr make(uhd::wb_iface::sptr iface, const size_t base, const size_t rb_addr);
+
+    /*!
+     * Create a write-only GPIO ATR interface object
+     *
+     * \param iface register iface to GPIO ATR registers
+     * \param base base settings offset for GPIO ATR registers
+     */
+    static sptr make_write_only(uhd::wb_iface::sptr iface, const size_t base);
+
+    /*!
+     * Select the ATR mode for all bits in the mask
+     *
+     * \param mode the mode to apply {ATR = outputs driven by ATR state machine, GPIO = outputs static}
+     * \param mask apply the mode to all non-zero bits in the mask
+     */
+    virtual void set_atr_mode(const gpio_atr_mode_t mode, const boost::uint32_t mask) = 0;
+
+    /*!
+     * Select the data direction for all bits in the mask
+     *
+     * \param dir the direction {OUTPUT, INPUT}
+     * \param mask apply the mode to all non-zero bits in the mask
+     */
+    virtual void set_gpio_ddr(const gpio_ddr_t dir, const boost::uint32_t mask) = 0;
+
+    /*!
+     * Write the specified (masked) value to the ATR register
+     *
+     * \param atr the type of ATR register to write to {IDLE, RX, TX, FDX}
+     * \param value the value to write
+     * \param mask only writes to the bits where mask is non-zero
+     */
+    virtual void set_atr_reg(const gpio_atr_reg_t atr, const boost::uint32_t value, const boost::uint32_t mask = 0xFFFFFFFF) = 0;
+
+    /*!
+     * Write to a static GPIO output
+     *
+     * \param value the value to write
+     * \param mask only writes to the bits where mask is non-zero
+     */
+    inline void set_gpio_out(const boost::uint32_t value, const boost::uint32_t mask = 0xFFFFFFFF) {
+        set_atr_reg(ATR_REG_IDLE, value, mask);
+    }
+
+    /*!
+     * Read the state of the GPIO pins
+     * If a pin is configured as an input, reads the actual value of the pin
+     * If a pin is configured as an output, reads the last value written to the pin
+     *
+     * \return the value read back
+     */
+    virtual boost::uint32_t read_gpio() = 0;
+
+    /*!
+     * Set a GPIO attribute
+     *
+     * \param attr the attribute to set
+     * \param value the value to write to the attribute
+     */
+    virtual void set_gpio_attr(const gpio_attr_t attr, const boost::uint32_t value) = 0;
+};
+
+class db_gpio_atr_3000 {
+public:
+    typedef boost::shared_ptr<db_gpio_atr_3000> sptr;
+
+    typedef uhd::usrp::dboard_iface::unit_t db_unit_t;
+
+    virtual ~db_gpio_atr_3000(void) {};
+
+    /*!
+     * Create a read-write GPIO ATR interface object for a daughterboard connector
+     *
+     * \param iface register iface to GPIO ATR registers
+     * \param base base settings offset for GPIO ATR registers
+     * \param base readback offset for GPIO ATR registers
+     */
+    static sptr make(uhd::wb_iface::sptr iface, const size_t base, const size_t rb_addr);
+
+    /*!
+     * Configure the GPIO mode for all pins in the daughterboard connector
+     *
+     * \param unit the side of the daughterboard interface to configure (TX or RX)
+     * \param value if value[i] is 1, the i'th bit is in ATR mode otherwise it is in GPIO mode
+     */
+    virtual void set_pin_ctrl(const db_unit_t unit, const boost::uint16_t value) = 0;
+
+    /*!
+     * Configure the direction for all pins in the daughterboard connector
+     *
+     * \param unit the side of the daughterboard interface to configure (TX or RX)
+     * \param value if value[i] is 1, the i'th bit is an output otherwise it is an input
+     */
+    virtual void set_gpio_ddr(const db_unit_t unit, const boost::uint16_t value) = 0;
+
+    /*!
+     * Write the specified value to the ATR register (all bits)
+     *
+     * \param atr the type of ATR register to write to {IDLE, RX, TX, FDX}
+     * \param unit the side of the daughterboard interface to configure (TX or RX)
+     * \param value the value to write
+     */
+    virtual void set_atr_reg(const db_unit_t unit, const gpio_atr_reg_t atr, const boost::uint16_t value) = 0;
+
+    /*!
+     * Write the specified value to the GPIO register (all bits)
+     *
+     * \param atr the type of ATR register to write to {IDLE, RX, TX, FDX}
+     * \param value the value to write
+     */
+    virtual void set_gpio_out(const db_unit_t unit, const boost::uint16_t value) = 0;
+
+    /*!
+     * Read the state of the GPIO pins
+     * If a pin is configured as an input, reads the actual value of the pin
+     * If a pin is configured as an output, reads the last value written to the pin
+     *
+     * \param unit the side of the daughterboard interface to configure (TX or RX)
+     * \return the value read back
+     */
+    virtual boost::uint16_t read_gpio(const db_unit_t unit) = 0;
+};
+
+}}} //namespaces
+
+#endif /* INCLUDED_LIBUHD_USRP_GPIO_CORE_3000_HPP */
diff --git a/host/lib/usrp/cores/gpio_core_200.cpp b/host/lib/usrp/cores/gpio_core_200.cpp
index 4f1c25a0b..05a689845 100644
--- a/host/lib/usrp/cores/gpio_core_200.cpp
+++ b/host/lib/usrp/cores/gpio_core_200.cpp
@@ -77,10 +77,10 @@ private:
     }
 
     void update(void){
-        this->update(dboard_iface::ATR_REG_IDLE, REG_GPIO_IDLE);
-        this->update(dboard_iface::ATR_REG_TX_ONLY, REG_GPIO_TX_ONLY);
-        this->update(dboard_iface::ATR_REG_RX_ONLY, REG_GPIO_RX_ONLY);
-        this->update(dboard_iface::ATR_REG_FULL_DUPLEX, REG_GPIO_BOTH);
+        this->update(gpio_atr::ATR_REG_IDLE, REG_GPIO_IDLE);
+        this->update(gpio_atr::ATR_REG_TX_ONLY, REG_GPIO_TX_ONLY);
+        this->update(gpio_atr::ATR_REG_RX_ONLY, REG_GPIO_RX_ONLY);
+        this->update(gpio_atr::ATR_REG_FULL_DUPLEX, REG_GPIO_BOTH);
     }
 
     void update(const atr_reg_t atr, const size_t addr){
@@ -122,17 +122,17 @@ public:
     }
 
     void set_atr_reg(const atr_reg_t atr, const boost::uint32_t value){
-        if (atr == dboard_iface::ATR_REG_IDLE)        _iface->poke32(REG_GPIO_IDLE, value);
-        if (atr == dboard_iface::ATR_REG_TX_ONLY)     _iface->poke32(REG_GPIO_TX_ONLY, value);
-        if (atr == dboard_iface::ATR_REG_RX_ONLY)     _iface->poke32(REG_GPIO_RX_ONLY, value);
-        if (atr == dboard_iface::ATR_REG_FULL_DUPLEX) _iface->poke32(REG_GPIO_BOTH, value);
+        if (atr == gpio_atr::ATR_REG_IDLE)        _iface->poke32(REG_GPIO_IDLE, value);
+        if (atr == gpio_atr::ATR_REG_TX_ONLY)     _iface->poke32(REG_GPIO_TX_ONLY, value);
+        if (atr == gpio_atr::ATR_REG_RX_ONLY)     _iface->poke32(REG_GPIO_RX_ONLY, value);
+        if (atr == gpio_atr::ATR_REG_FULL_DUPLEX) _iface->poke32(REG_GPIO_BOTH, value);
     }
 
     void set_all_regs(const boost::uint32_t value){
-        this->set_atr_reg(dboard_iface::ATR_REG_IDLE,        value);
-        this->set_atr_reg(dboard_iface::ATR_REG_TX_ONLY,     value);
-        this->set_atr_reg(dboard_iface::ATR_REG_RX_ONLY,     value);
-        this->set_atr_reg(dboard_iface::ATR_REG_FULL_DUPLEX, value);
+        this->set_atr_reg(gpio_atr::ATR_REG_IDLE,        value);
+        this->set_atr_reg(gpio_atr::ATR_REG_TX_ONLY,     value);
+        this->set_atr_reg(gpio_atr::ATR_REG_RX_ONLY,     value);
+        this->set_atr_reg(gpio_atr::ATR_REG_FULL_DUPLEX, value);
     }
 
 private:
diff --git a/host/lib/usrp/cores/gpio_core_200.hpp b/host/lib/usrp/cores/gpio_core_200.hpp
index e22834fd9..c60507792 100644
--- a/host/lib/usrp/cores/gpio_core_200.hpp
+++ b/host/lib/usrp/cores/gpio_core_200.hpp
@@ -20,6 +20,7 @@
 
 #include <uhd/config.hpp>
 #include <uhd/usrp/dboard_iface.hpp>
+#include <uhd/usrp/gpio_defs.hpp>
 #include <boost/assign.hpp>
 #include <boost/cstdint.hpp>
 #include <boost/utility.hpp>
@@ -27,28 +28,6 @@
 #include <uhd/types/wb_iface.hpp>
 #include <map>
 
-typedef enum {
-    GPIO_CTRL,
-    GPIO_DDR,
-    GPIO_OUT,
-    GPIO_ATR_0X,
-    GPIO_ATR_RX,
-    GPIO_ATR_TX,
-    GPIO_ATR_XX
-} gpio_attr_t;
-
-typedef std::map<gpio_attr_t,std::string> gpio_attr_map_t;
-static const gpio_attr_map_t gpio_attr_map =
-    boost::assign::map_list_of
-        (GPIO_CTRL,   "CTRL")
-        (GPIO_DDR,    "DDR")
-        (GPIO_OUT,    "OUT")
-        (GPIO_ATR_0X, "ATR_0X")
-        (GPIO_ATR_RX, "ATR_RX")
-        (GPIO_ATR_TX, "ATR_TX")
-        (GPIO_ATR_XX, "ATR_XX")
-;
-
 class gpio_core_200 : boost::noncopyable{
 public:
     typedef boost::shared_ptr<gpio_core_200> sptr;
diff --git a/host/lib/usrp/dboard/db_rfx.cpp b/host/lib/usrp/dboard/db_rfx.cpp
index 1342c913d..3e7df9a39 100644
--- a/host/lib/usrp/dboard/db_rfx.cpp
+++ b/host/lib/usrp/dboard/db_rfx.cpp
@@ -248,15 +248,15 @@ rfx_xcvr::rfx_xcvr(
     this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, output_enables);
 
     //setup the tx atr (this does not change with antenna)
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE,        _power_up | ANT_XX | MIXER_DIS);
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY,     _power_up | ANT_RX | MIXER_DIS);
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY,     _power_up | ANT_TX | MIXER_ENB);
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_TX | MIXER_ENB);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE,        _power_up | ANT_XX | MIXER_DIS);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_RX_ONLY,     _power_up | ANT_RX | MIXER_DIS);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY,     _power_up | ANT_TX | MIXER_ENB);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_TX | MIXER_ENB);
 
     //setup the rx atr (this does not change with antenna)
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE,        _power_up | ANT_XX | MIXER_DIS);
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY,     _power_up | ANT_XX | MIXER_DIS);
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX2| MIXER_ENB);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE,        _power_up | ANT_XX | MIXER_DIS);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY,     _power_up | ANT_XX | MIXER_DIS);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX2| MIXER_ENB);
 }
 
 rfx_xcvr::~rfx_xcvr(void){
@@ -272,14 +272,14 @@ void rfx_xcvr::set_rx_ant(const std::string &ant){
 
     //set the rx atr regs that change with antenna setting
     if (ant == "CAL") {
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY,     _power_up | ANT_TXRX  | MIXER_ENB);
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_TXRX  | MIXER_ENB);
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY,     _power_up | MIXER_ENB | ANT_TXRX );
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY,     _power_up | ANT_TXRX  | MIXER_ENB);
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_TXRX  | MIXER_ENB);
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY,     _power_up | MIXER_ENB | ANT_TXRX );
     } 
     else {
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY,     _power_up | ANT_XX | MIXER_DIS);
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX2| MIXER_ENB);
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY,     _power_up | MIXER_ENB |
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY,     _power_up | ANT_XX | MIXER_DIS);
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX2| MIXER_ENB);
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY,     _power_up | MIXER_ENB |
             ((ant == "TX/RX")? ANT_TXRX : ANT_RX2));
     }
 
@@ -292,12 +292,12 @@ void rfx_xcvr::set_tx_ant(const std::string &ant){
 
     //set the tx atr regs that change with antenna setting
     if (ant == "CAL") {
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY,     _power_up | ANT_RX | MIXER_ENB);
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX | MIXER_ENB);
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY,     _power_up | ANT_RX | MIXER_ENB);
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_RX | MIXER_ENB);
     } 
     else {
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY,     _power_up | ANT_TX | MIXER_ENB);
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_TX | MIXER_ENB);
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY,     _power_up | ANT_TX | MIXER_ENB);
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, _power_up | ANT_TX | MIXER_ENB);
     }
 }
 
diff --git a/host/lib/usrp/dboard/db_sbx_common.cpp b/host/lib/usrp/dboard/db_sbx_common.cpp
index ce5166c4c..d5d55dd17 100644
--- a/host/lib/usrp/dboard/db_sbx_common.cpp
+++ b/host/lib/usrp/dboard/db_sbx_common.cpp
@@ -265,39 +265,39 @@ void sbx_xcvr::update_atr(void){
 
     //setup the tx atr (this does not change with antenna)
     this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
-            dboard_iface::ATR_REG_IDLE, 0 | tx_lo_lpf_en \
+            gpio_atr::ATR_REG_IDLE, 0 | tx_lo_lpf_en \
             | tx_ld_led | tx_ant_led | TX_POWER_UP | ANT_XX | TX_MIXER_DIS);
 
     //setup the rx atr (this does not change with antenna)
     this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
-            dboard_iface::ATR_REG_IDLE, rx_pga0_iobits | rx_lo_lpf_en \
+            gpio_atr::ATR_REG_IDLE, rx_pga0_iobits | rx_lo_lpf_en \
             | rx_ld_led | rx_ant_led | RX_POWER_UP | ANT_XX | RX_MIXER_DIS);
 
     //set the RX atr regs that change with antenna setting
     this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
-            dboard_iface::ATR_REG_RX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \
+            gpio_atr::ATR_REG_RX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \
             | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_ENB \
             | ((_rx_ant != "RX2")? ANT_TXRX : ANT_RX2));
     this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
-            dboard_iface::ATR_REG_TX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \
+            gpio_atr::ATR_REG_TX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \
             | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_DIS \
             | ((_rx_ant == "CAL")? ANT_TXRX : ANT_RX2));
     this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
-            dboard_iface::ATR_REG_FULL_DUPLEX, rx_pga0_iobits | rx_lo_lpf_en \
+            gpio_atr::ATR_REG_FULL_DUPLEX, rx_pga0_iobits | rx_lo_lpf_en \
             | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_ENB \
             | ((_rx_ant == "CAL")? ANT_TXRX : ANT_RX2));
 
     //set the TX atr regs that change with antenna setting
     this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
-            dboard_iface::ATR_REG_RX_ONLY, 0 | tx_lo_lpf_en \
+            gpio_atr::ATR_REG_RX_ONLY, 0 | tx_lo_lpf_en \
             | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_DIS \
             | ((_rx_ant != "RX2")? ANT_RX : ANT_TX));
     this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
-            dboard_iface::ATR_REG_TX_ONLY, tx_pga0_iobits | tx_lo_lpf_en \
+            gpio_atr::ATR_REG_TX_ONLY, tx_pga0_iobits | tx_lo_lpf_en \
             | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_ENB \
             | ((_tx_ant == "CAL")? ANT_RX : ANT_TX));
     this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
-            dboard_iface::ATR_REG_FULL_DUPLEX, tx_pga0_iobits | tx_lo_lpf_en \
+            gpio_atr::ATR_REG_FULL_DUPLEX, tx_pga0_iobits | tx_lo_lpf_en \
             | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_ENB \
             | ((_tx_ant == "CAL")? ANT_RX : ANT_TX));
 }
diff --git a/host/lib/usrp/dboard/db_ubx.cpp b/host/lib/usrp/dboard/db_ubx.cpp
index 7cb4b2d6b..a8af0f9d8 100644
--- a/host/lib/usrp/dboard/db_ubx.cpp
+++ b/host/lib/usrp/dboard/db_ubx.cpp
@@ -318,14 +318,14 @@ public:
         write_gpio();
 
         // Configure ATR
-        _iface->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, _tx_gpio_reg.atr_idle);
-        _iface->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, _tx_gpio_reg.atr_tx);
-        _iface->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, _tx_gpio_reg.atr_rx);
-        _iface->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, _tx_gpio_reg.atr_full_duplex);
-        _iface->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, _rx_gpio_reg.atr_idle);
-        _iface->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, _rx_gpio_reg.atr_tx);
-        _iface->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, _rx_gpio_reg.atr_rx);
-        _iface->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, _rx_gpio_reg.atr_full_duplex);
+        _iface->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE, _tx_gpio_reg.atr_idle);
+        _iface->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY, _tx_gpio_reg.atr_tx);
+        _iface->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_RX_ONLY, _tx_gpio_reg.atr_rx);
+        _iface->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, _tx_gpio_reg.atr_full_duplex);
+        _iface->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE, _rx_gpio_reg.atr_idle);
+        _iface->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY, _rx_gpio_reg.atr_tx);
+        _iface->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY, _rx_gpio_reg.atr_rx);
+        _iface->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, _rx_gpio_reg.atr_full_duplex);
 
         // Engage ATR control (1 is ATR control, 0 is manual control)
         _iface->set_pin_ctrl(dboard_iface::UNIT_TX, _tx_gpio_reg.atr_mask);
diff --git a/host/lib/usrp/dboard/db_wbx_simple.cpp b/host/lib/usrp/dboard/db_wbx_simple.cpp
index c8f2be155..dda2def95 100644
--- a/host/lib/usrp/dboard/db_wbx_simple.cpp
+++ b/host/lib/usrp/dboard/db_wbx_simple.cpp
@@ -112,14 +112,14 @@ wbx_simple::wbx_simple(ctor_args_t args) : wbx_base(args){
     this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, ANTSW_IO, ANTSW_IO);
 
     //setup ATR for the antenna switches (constant)
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE,        ANT_RX, ANTSW_IO);
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY,     ANT_RX, ANTSW_IO);
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY,     ANT_TX, ANTSW_IO);
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, ANT_TX, ANTSW_IO);
-
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE,        ANT_TXRX, ANTSW_IO);
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY,     ANT_RX2, ANTSW_IO);
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, ANT_RX2, ANTSW_IO);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE,        ANT_RX, ANTSW_IO);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_RX_ONLY,     ANT_RX, ANTSW_IO);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY,     ANT_TX, ANTSW_IO);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, ANT_TX, ANTSW_IO);
+
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE,        ANT_TXRX, ANTSW_IO);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY,     ANT_RX2, ANTSW_IO);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, ANT_RX2, ANTSW_IO);
 }
 
 wbx_simple::~wbx_simple(void){
@@ -138,14 +138,14 @@ void wbx_simple::set_rx_ant(const std::string &ant){
 
     //write the new antenna setting to atr regs
     if (_rx_ant == "CAL") {
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY,     ANT_TXRX, ANTSW_IO);
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, ANT_TXRX, ANTSW_IO);
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY,     ANT_TXRX, ANTSW_IO);
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY,     ANT_TXRX, ANTSW_IO);
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, ANT_TXRX, ANTSW_IO);
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY,     ANT_TXRX, ANTSW_IO);
     } 
     else {
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY,     ANT_RX2, ANTSW_IO);
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, ANT_RX2, ANTSW_IO);
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, ((_rx_ant == "TX/RX")? ANT_TXRX : ANT_RX2), ANTSW_IO);
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY,     ANT_RX2, ANTSW_IO);
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, ANT_RX2, ANTSW_IO);
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY, ((_rx_ant == "TX/RX")? ANT_TXRX : ANT_RX2), ANTSW_IO);
     }
 }
 
@@ -154,11 +154,11 @@ void wbx_simple::set_tx_ant(const std::string &ant){
 
     //write the new antenna setting to atr regs
     if (ant == "CAL") {
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY,     ANT_RX, ANTSW_IO);
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, ANT_RX, ANTSW_IO);
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY,     ANT_RX, ANTSW_IO);
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, ANT_RX, ANTSW_IO);
     } 
     else {
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY,     ANT_TX, ANTSW_IO);
-        this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, ANT_TX, ANTSW_IO);
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY,     ANT_TX, ANTSW_IO);
+        this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, ANT_TX, ANTSW_IO);
     }
 }
diff --git a/host/lib/usrp/dboard/db_wbx_version2.cpp b/host/lib/usrp/dboard/db_wbx_version2.cpp
index 93047fb7a..78b5b2871 100644
--- a/host/lib/usrp/dboard/db_wbx_version2.cpp
+++ b/host/lib/usrp/dboard/db_wbx_version2.cpp
@@ -117,15 +117,15 @@ wbx_base::wbx_version2::wbx_version2(wbx_base *_self_wbx_base) {
     self_base->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, RX_PUP_5V|RX_PUP_3V|ADF435X_CE|RXBB_PDB|ADF435X_PDBRF|RX_ATTN_MASK);
 
     //setup ATR for the mixer enables (always enabled to prevent phase slip between bursts)
-    self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE,        v2_tx_mod, TX_MIXER_DIS | v2_tx_mod);
-    self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY,     v2_tx_mod, TX_MIXER_DIS | v2_tx_mod);
-    self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY,     v2_tx_mod, TX_MIXER_DIS | v2_tx_mod);
-    self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, v2_tx_mod, TX_MIXER_DIS | v2_tx_mod);
-
-    self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE,        RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
-    self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY,     RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
-    self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY,     RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
-    self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
+    self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE,        v2_tx_mod, TX_MIXER_DIS | v2_tx_mod);
+    self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_RX_ONLY,     v2_tx_mod, TX_MIXER_DIS | v2_tx_mod);
+    self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY,     v2_tx_mod, TX_MIXER_DIS | v2_tx_mod);
+    self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, v2_tx_mod, TX_MIXER_DIS | v2_tx_mod);
+
+    self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE,        RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
+    self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY,     RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
+    self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY,     RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
+    self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
 }
 
 wbx_base::wbx_version2::~wbx_version2(void){
diff --git a/host/lib/usrp/dboard/db_wbx_version3.cpp b/host/lib/usrp/dboard/db_wbx_version3.cpp
index 6927ae4e4..a5821ffc2 100644
--- a/host/lib/usrp/dboard/db_wbx_version3.cpp
+++ b/host/lib/usrp/dboard/db_wbx_version3.cpp
@@ -129,29 +129,29 @@ wbx_base::wbx_version3::wbx_version3(wbx_base *_self_wbx_base) {
     //slip between bursts).  set TX gain iobits to min gain (max attenuation)
     //when RX_ONLY or IDLE to suppress LO leakage
     self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
-            dboard_iface::ATR_REG_IDLE, v3_tx_mod, \
+            gpio_atr::ATR_REG_IDLE, v3_tx_mod, \
             TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod);
     self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
-            dboard_iface::ATR_REG_RX_ONLY, v3_tx_mod, \
+            gpio_atr::ATR_REG_RX_ONLY, v3_tx_mod, \
             TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod);
     self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
-            dboard_iface::ATR_REG_TX_ONLY, v3_tx_mod, \
+            gpio_atr::ATR_REG_TX_ONLY, v3_tx_mod, \
             TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod);
     self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
-            dboard_iface::ATR_REG_FULL_DUPLEX, v3_tx_mod, \
+            gpio_atr::ATR_REG_FULL_DUPLEX, v3_tx_mod, \
             TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod);
 
     self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
-            dboard_iface::ATR_REG_IDLE, \
+            gpio_atr::ATR_REG_IDLE, \
             RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
     self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
-            dboard_iface::ATR_REG_TX_ONLY, \
+            gpio_atr::ATR_REG_TX_ONLY, \
             RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
     self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
-            dboard_iface::ATR_REG_RX_ONLY, \
+            gpio_atr::ATR_REG_RX_ONLY, \
             RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
     self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
-            dboard_iface::ATR_REG_FULL_DUPLEX, \
+            gpio_atr::ATR_REG_FULL_DUPLEX, \
             RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
 }
 
@@ -181,8 +181,8 @@ double wbx_base::wbx_version3::set_tx_gain(double gain, const std::string &name)
 
         //write the new gain to tx gpio outputs
         //Update ATR with gain io_bits, only update for TX_ONLY and FULL_DUPLEX ATR states
-        self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY,     io_bits, TX_ATTN_MASK);
-        self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, io_bits, TX_ATTN_MASK);
+        self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY,     io_bits, TX_ATTN_MASK);
+        self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, io_bits, TX_ATTN_MASK);
     }
     else UHD_THROW_INVALID_CODE_PATH();
     return self_base->_tx_gains[name]; //shadow
diff --git a/host/lib/usrp/dboard/db_wbx_version4.cpp b/host/lib/usrp/dboard/db_wbx_version4.cpp
index 81cdaefac..327ae675b 100644
--- a/host/lib/usrp/dboard/db_wbx_version4.cpp
+++ b/host/lib/usrp/dboard/db_wbx_version4.cpp
@@ -136,29 +136,29 @@ wbx_base::wbx_version4::wbx_version4(wbx_base *_self_wbx_base) {
     //between bursts) set TX gain iobits to min gain (max attenuation) when
     //RX_ONLY or IDLE to suppress LO leakage
     self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
-            dboard_iface::ATR_REG_IDLE, v4_tx_mod, \
+            gpio_atr::ATR_REG_IDLE, v4_tx_mod, \
             TX_ATTN_MASK | TX_MIXER_DIS | v4_tx_mod);
     self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
-            dboard_iface::ATR_REG_RX_ONLY, v4_tx_mod, \
+            gpio_atr::ATR_REG_RX_ONLY, v4_tx_mod, \
             TX_ATTN_MASK | TX_MIXER_DIS | v4_tx_mod);
     self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
-            dboard_iface::ATR_REG_TX_ONLY, v4_tx_mod, \
+            gpio_atr::ATR_REG_TX_ONLY, v4_tx_mod, \
             TX_ATTN_MASK | TX_MIXER_DIS | v4_tx_mod);
     self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
-            dboard_iface::ATR_REG_FULL_DUPLEX, v4_tx_mod, \
+            gpio_atr::ATR_REG_FULL_DUPLEX, v4_tx_mod, \
             TX_ATTN_MASK | TX_MIXER_DIS | v4_tx_mod);
 
     self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
-            dboard_iface::ATR_REG_IDLE, \
+            gpio_atr::ATR_REG_IDLE, \
             RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
     self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
-            dboard_iface::ATR_REG_TX_ONLY, \
+            gpio_atr::ATR_REG_TX_ONLY, \
             RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
     self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
-            dboard_iface::ATR_REG_RX_ONLY, \
+            gpio_atr::ATR_REG_RX_ONLY, \
             RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
     self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
-            dboard_iface::ATR_REG_FULL_DUPLEX, \
+            gpio_atr::ATR_REG_FULL_DUPLEX, \
             RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
 }
 
@@ -188,8 +188,8 @@ double wbx_base::wbx_version4::set_tx_gain(double gain, const std::string &name)
 
         //write the new gain to tx gpio outputs
         //Update ATR with gain io_bits, only update for TX_ONLY and FULL_DUPLEX ATR states
-        self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY,     io_bits, TX_ATTN_MASK);
-        self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, io_bits, TX_ATTN_MASK);
+        self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY,     io_bits, TX_ATTN_MASK);
+        self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, io_bits, TX_ATTN_MASK);
 
     }
     else UHD_THROW_INVALID_CODE_PATH();
diff --git a/host/lib/usrp/dboard/db_xcvr2450.cpp b/host/lib/usrp/dboard/db_xcvr2450.cpp
index 50c67991a..092f84548 100644
--- a/host/lib/usrp/dboard/db_xcvr2450.cpp
+++ b/host/lib/usrp/dboard/db_xcvr2450.cpp
@@ -315,12 +315,12 @@ xcvr2450::~xcvr2450(void){
 
 void xcvr2450::spi_reset(void){
     //spi reset mode: global enable = off, tx and rx enable = on
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, TX_ENB_TXIO);
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, RX_ENB_RXIO | POWER_DOWN_RXIO);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE, TX_ENB_TXIO);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE, RX_ENB_RXIO | POWER_DOWN_RXIO);
     boost::this_thread::sleep(boost::posix_time::milliseconds(10));
 
     //take it back out of spi reset mode and wait a bit
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, RX_DIS_RXIO | POWER_UP_RXIO);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE, RX_DIS_RXIO | POWER_UP_RXIO);
     boost::this_thread::sleep(boost::posix_time::milliseconds(10));
 }
 
@@ -337,16 +337,16 @@ void xcvr2450::update_atr(void){
     int ad9515div  = (_ad9515div == 3)? AD9515DIV_3_TXIO : AD9515DIV_2_TXIO;
 
     //set the tx registers
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE,        band_sel | ad9515div | TX_DIS_TXIO);
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY,     band_sel | ad9515div | TX_DIS_TXIO | rx_ant_sel);
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY,     band_sel | ad9515div | TX_ENB_TXIO | tx_ant_sel);
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, band_sel | ad9515div | TX_ENB_TXIO | xx_ant_sel);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_IDLE,        band_sel | ad9515div | TX_DIS_TXIO);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_RX_ONLY,     band_sel | ad9515div | TX_DIS_TXIO | rx_ant_sel);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_TX_ONLY,     band_sel | ad9515div | TX_ENB_TXIO | tx_ant_sel);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, gpio_atr::ATR_REG_FULL_DUPLEX, band_sel | ad9515div | TX_ENB_TXIO | xx_ant_sel);
 
     //set the rx registers
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE,        POWER_UP_RXIO | RX_DIS_RXIO);
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY,     POWER_UP_RXIO | RX_ENB_RXIO);
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY,     POWER_UP_RXIO | RX_DIS_RXIO);
-    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, POWER_UP_RXIO | RX_DIS_RXIO);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_IDLE,        POWER_UP_RXIO | RX_DIS_RXIO);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_RX_ONLY,     POWER_UP_RXIO | RX_ENB_RXIO);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_TX_ONLY,     POWER_UP_RXIO | RX_DIS_RXIO);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, gpio_atr::ATR_REG_FULL_DUPLEX, POWER_UP_RXIO | RX_DIS_RXIO);
 }
 
 /***********************************************************************
diff --git a/host/lib/usrp/e300/e300_impl.cpp b/host/lib/usrp/e300/e300_impl.cpp
index 6d66e83c0..cfa85a46a 100644
--- a/host/lib/usrp/e300/e300_impl.cpp
+++ b/host/lib/usrp/e300/e300_impl.cpp
@@ -48,6 +48,7 @@
 
 using namespace uhd;
 using namespace uhd::usrp;
+using namespace uhd::usrp::gpio_atr;
 using namespace uhd::transport;
 namespace fs = boost::filesystem;
 namespace asio = boost::asio;
@@ -512,15 +513,15 @@ e300_impl::e300_impl(const uhd::device_addr_t &device_addr)
     ////////////////////////////////////////////////////////////////////
     // internal gpios
     ////////////////////////////////////////////////////////////////////
-    gpio_core_200::sptr fp_gpio = gpio_core_200::make(_radio_perifs[0].ctrl, radio::sr_addr(radio::FP_GPIO), radio::RB32_FP_GPIO);
+    gpio_atr_3000::sptr fp_gpio = gpio_atr_3000::make(_radio_perifs[0].ctrl, radio::sr_addr(radio::FP_GPIO), radio::RB32_FP_GPIO);
     BOOST_FOREACH(const gpio_attr_map_t::value_type attr, gpio_attr_map)
     {
         _tree->create<boost::uint32_t>(mb_path / "gpio" / "INT0" / attr.second)
-            .subscribe(boost::bind(&e300_impl::_set_internal_gpio, this, fp_gpio, attr.first, _1))
+            .subscribe(boost::bind(&gpio_atr_3000::set_gpio_attr, fp_gpio, attr.first, _1))
             .set(0);
     }
     _tree->create<boost::uint8_t>(mb_path / "gpio" / "INT0" / "READBACK")
-        .publish(boost::bind(&e300_impl::_get_internal_gpio, this, fp_gpio));
+        .publish(boost::bind(&gpio_atr_3000::read_gpio, fp_gpio));
 
 
     ////////////////////////////////////////////////////////////////////
@@ -623,37 +624,6 @@ e300_impl::e300_impl(const uhd::device_addr_t &device_addr)
     _tree->access<subdev_spec_t>(mb_path / "tx_subdev_spec").set(tx_spec);
 }
 
-boost::uint8_t e300_impl::_get_internal_gpio(gpio_core_200::sptr gpio)
-{
-    return boost::uint32_t(gpio->read_gpio(dboard_iface::UNIT_RX));
-}
-
-void e300_impl::_set_internal_gpio(
-    gpio_core_200::sptr gpio,
-    const gpio_attr_t attr,
-    const boost::uint32_t value)
-{
-    switch (attr)
-    {
-    case GPIO_CTRL:
-        return gpio->set_pin_ctrl(dboard_iface::UNIT_RX, value);
-    case GPIO_DDR:
-        return gpio->set_gpio_ddr(dboard_iface::UNIT_RX, value);
-    case GPIO_OUT:
-        return gpio->set_gpio_out(dboard_iface::UNIT_RX, value);
-    case GPIO_ATR_0X:
-        return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, value);
-    case GPIO_ATR_RX:
-        return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, value);
-    case GPIO_ATR_TX:
-        return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, value);
-    case GPIO_ATR_XX:
-        return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, value);
-    default:
-        UHD_THROW_INVALID_CODE_PATH();
-    }
-}
-
 uhd::sensor_value_t e300_impl::_get_fe_pll_lock(const bool is_tx)
 {
     const boost::uint32_t st =
@@ -978,7 +948,8 @@ void e300_impl::_setup_radio(const size_t dspno)
     ////////////////////////////////////////////////////////////////////
     // Set up peripherals
     ////////////////////////////////////////////////////////////////////
-    perif.atr = gpio_core_200_32wo::make(perif.ctrl, radio::sr_addr(radio::GPIO));
+    perif.atr = gpio_atr_3000::make_write_only(perif.ctrl, radio::sr_addr(radio::GPIO));
+    perif.atr->set_atr_mode(MODE_ATR, 0xFFFFFFFF);
     perif.rx_fe = rx_frontend_core_200::make(perif.ctrl, radio::sr_addr(radio::RX_FRONT));
     perif.rx_fe->set_dc_offset(rx_frontend_core_200::DEFAULT_DC_OFFSET_VALUE);
     perif.rx_fe->set_dc_offset_auto(rx_frontend_core_200::DEFAULT_DC_OFFSET_ENABLE);
@@ -1291,11 +1262,11 @@ void e300_impl::_update_atrs(void)
         if (enb_tx)
             fd_reg |= tx_enables | xx_leds;
 
-        gpio_core_200_32wo::sptr atr = _radio_perifs[instance].atr;
-        atr->set_atr_reg(dboard_iface::ATR_REG_IDLE, oo_reg);
-        atr->set_atr_reg(dboard_iface::ATR_REG_RX_ONLY, rx_reg);
-        atr->set_atr_reg(dboard_iface::ATR_REG_TX_ONLY, tx_reg);
-        atr->set_atr_reg(dboard_iface::ATR_REG_FULL_DUPLEX, fd_reg);
+        gpio_atr_3000::sptr atr = _radio_perifs[instance].atr;
+        atr->set_atr_reg(ATR_REG_IDLE, oo_reg);
+        atr->set_atr_reg(ATR_REG_RX_ONLY, rx_reg);
+        atr->set_atr_reg(ATR_REG_TX_ONLY, tx_reg);
+        atr->set_atr_reg(ATR_REG_FULL_DUPLEX, fd_reg);
     }
 }
 
diff --git a/host/lib/usrp/e300/e300_impl.hpp b/host/lib/usrp/e300/e300_impl.hpp
index 8aff51466..9b39c7468 100644
--- a/host/lib/usrp/e300/e300_impl.hpp
+++ b/host/lib/usrp/e300/e300_impl.hpp
@@ -41,7 +41,7 @@
 #include "tx_dsp_core_3000.hpp"
 #include "ad9361_ctrl.hpp"
 #include "ad936x_manager.hpp"
-#include "gpio_core_200.hpp"
+#include "gpio_atr_3000.hpp"
 
 #include "e300_global_regs.hpp"
 #include "e300_i2c.hpp"
@@ -146,7 +146,7 @@ private: // types
     struct radio_perifs_t
     {
         radio_ctrl_core_3000::sptr ctrl;
-        gpio_core_200_32wo::sptr atr;
+        gpio_atr::gpio_atr_3000::sptr atr;
         time_core_3000::sptr time64;
         rx_vita_core_3000::sptr framer;
         rx_dsp_core_3000::sptr ddc;
@@ -277,14 +277,6 @@ private: // methods
     // get frontend lock sensor
     uhd::sensor_value_t _get_fe_pll_lock(const bool is_tx);
 
-    // internal gpios
-    boost::uint8_t _get_internal_gpio(gpio_core_200::sptr);
-
-    void _set_internal_gpio(
-        gpio_core_200::sptr gpio,
-        const gpio_attr_t attr,
-        const boost::uint32_t value);
-
 private: // members
     uhd::device_addr_t                     _device_addr;
     xport_t                                _xport_path;
diff --git a/host/lib/usrp/multi_usrp.cpp b/host/lib/usrp/multi_usrp.cpp
index 57c593efb..dbc0ebed2 100644
--- a/host/lib/usrp/multi_usrp.cpp
+++ b/host/lib/usrp/multi_usrp.cpp
@@ -1348,10 +1348,10 @@ public:
             if (attr == "CTRL") iface->set_pin_ctrl(unit, boost::uint16_t(value), boost::uint16_t(mask));
             if (attr == "DDR") iface->set_gpio_ddr(unit, boost::uint16_t(value), boost::uint16_t(mask));
             if (attr == "OUT") iface->set_gpio_out(unit, boost::uint16_t(value), boost::uint16_t(mask));
-            if (attr == "ATR_0X") iface->set_atr_reg(unit, dboard_iface::ATR_REG_IDLE, boost::uint16_t(value), boost::uint16_t(mask));
-            if (attr == "ATR_RX") iface->set_atr_reg(unit, dboard_iface::ATR_REG_RX_ONLY, boost::uint16_t(value), boost::uint16_t(mask));
-            if (attr == "ATR_TX") iface->set_atr_reg(unit, dboard_iface::ATR_REG_TX_ONLY, boost::uint16_t(value), boost::uint16_t(mask));
-            if (attr == "ATR_XX") iface->set_atr_reg(unit, dboard_iface::ATR_REG_FULL_DUPLEX, boost::uint16_t(value), boost::uint16_t(mask));
+            if (attr == "ATR_0X") iface->set_atr_reg(unit, gpio_atr::ATR_REG_IDLE, boost::uint16_t(value), boost::uint16_t(mask));
+            if (attr == "ATR_RX") iface->set_atr_reg(unit, gpio_atr::ATR_REG_RX_ONLY, boost::uint16_t(value), boost::uint16_t(mask));
+            if (attr == "ATR_TX") iface->set_atr_reg(unit, gpio_atr::ATR_REG_TX_ONLY, boost::uint16_t(value), boost::uint16_t(mask));
+            if (attr == "ATR_XX") iface->set_atr_reg(unit, gpio_atr::ATR_REG_FULL_DUPLEX, boost::uint16_t(value), boost::uint16_t(mask));
         }
     }
 
@@ -1369,10 +1369,10 @@ public:
             if (attr == "CTRL") return iface->get_pin_ctrl(unit);
             if (attr == "DDR") return iface->get_gpio_ddr(unit);
             if (attr == "OUT") return iface->get_gpio_out(unit);
-            if (attr == "ATR_0X") return iface->get_atr_reg(unit, dboard_iface::ATR_REG_IDLE);
-            if (attr == "ATR_RX") return iface->get_atr_reg(unit, dboard_iface::ATR_REG_RX_ONLY);
-            if (attr == "ATR_TX") return iface->get_atr_reg(unit, dboard_iface::ATR_REG_TX_ONLY);
-            if (attr == "ATR_XX") return iface->get_atr_reg(unit, dboard_iface::ATR_REG_FULL_DUPLEX);
+            if (attr == "ATR_0X") return iface->get_atr_reg(unit, gpio_atr::ATR_REG_IDLE);
+            if (attr == "ATR_RX") return iface->get_atr_reg(unit, gpio_atr::ATR_REG_RX_ONLY);
+            if (attr == "ATR_TX") return iface->get_atr_reg(unit, gpio_atr::ATR_REG_TX_ONLY);
+            if (attr == "ATR_XX") return iface->get_atr_reg(unit, gpio_atr::ATR_REG_FULL_DUPLEX);
             if (attr == "READBACK") return iface->read_gpio(unit);
         }
         return 0;
diff --git a/host/lib/usrp/usrp1/dboard_iface.cpp b/host/lib/usrp/usrp1/dboard_iface.cpp
index 4c3141d9e..502d0fbe3 100644
--- a/host/lib/usrp/usrp1/dboard_iface.cpp
+++ b/host/lib/usrp/usrp1/dboard_iface.cpp
@@ -63,6 +63,7 @@
 
 using namespace uhd;
 using namespace uhd::usrp;
+using namespace uhd::usrp::gpio_atr;
 using namespace boost::assign;
 
 static const dboard_id_t tvrx_id(0x0040);
diff --git a/host/lib/usrp/x300/x300_impl.cpp b/host/lib/usrp/x300/x300_impl.cpp
index 1e424414e..98806fe07 100644
--- a/host/lib/usrp/x300/x300_impl.cpp
+++ b/host/lib/usrp/x300/x300_impl.cpp
@@ -47,6 +47,7 @@ using namespace uhd;
 using namespace uhd::usrp;
 using namespace uhd::transport;
 using namespace uhd::niusrprio;
+using namespace uhd::usrp::gpio_atr;
 using namespace uhd::usrp::x300;
 namespace asio = boost::asio;
 
@@ -749,15 +750,15 @@ void x300_impl::setup_mb(const size_t mb_i, const uhd::device_addr_t &dev_addr)
     ////////////////////////////////////////////////////////////////////
     // front panel gpio
     ////////////////////////////////////////////////////////////////////
-    mb.fp_gpio = gpio_core_200::make(mb.radio_perifs[0].ctrl, radio::sr_addr(radio::FP_GPIO), radio::RB32_FP_GPIO);
+    mb.fp_gpio = gpio_atr_3000::make(mb.radio_perifs[0].ctrl, radio::sr_addr(radio::FP_GPIO), radio::RB32_FP_GPIO);
     BOOST_FOREACH(const gpio_attr_map_t::value_type attr, gpio_attr_map)
     {
         _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / attr.second)
             .set(0)
-            .subscribe(boost::bind(&x300_impl::set_fp_gpio, this, mb.fp_gpio, attr.first, _1));
+            .subscribe(boost::bind(&gpio_atr_3000::set_gpio_attr, mb.fp_gpio, attr.first, _1));
     }
     _tree->create<boost::uint32_t>(mb_path / "gpio" / "FP0" / "READBACK")
-        .publish(boost::bind(&x300_impl::get_fp_gpio, this, mb.fp_gpio));
+        .publish(boost::bind(&gpio_atr_3000::read_gpio, mb.fp_gpio));
 
     ////////////////////////////////////////////////////////////////////
     // register the time keepers - only one can be the highlander
@@ -930,7 +931,8 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name, con
     perif.spi = spi_core_3000::make(perif.ctrl, radio::sr_addr(radio::SPI), radio::RB32_SPI);
     perif.adc = x300_adc_ctrl::make(perif.spi, DB_ADC_SEN);
     perif.dac = x300_dac_ctrl::make(perif.spi, DB_DAC_SEN, mb.clock->get_master_clock_rate());
-    perif.leds = gpio_core_200_32wo::make(perif.ctrl, radio::sr_addr(radio::LEDS));
+    perif.leds = gpio_atr_3000::make_write_only(perif.ctrl, radio::sr_addr(radio::LEDS));
+    perif.leds->set_atr_mode(MODE_ATR, 0xFFFFFFFF);
     perif.rx_fe = rx_frontend_core_200::make(perif.ctrl, radio::sr_addr(radio::RX_FRONT));
     perif.rx_fe->set_dc_offset(rx_frontend_core_200::DEFAULT_DC_OFFSET_VALUE);
     perif.rx_fe->set_dc_offset_auto(rx_frontend_core_200::DEFAULT_DC_OFFSET_ENABLE);
@@ -1014,7 +1016,7 @@ void x300_impl::setup_radio(const size_t mb_i, const std::string &slot_name, con
 
     //create a new dboard interface
     x300_dboard_iface_config_t db_config;
-    db_config.gpio = gpio_core_200::make(perif.ctrl, radio::sr_addr(radio::GPIO), radio::RB32_GPIO);
+    db_config.gpio = db_gpio_atr_3000::make(perif.ctrl, radio::sr_addr(radio::GPIO), radio::RB32_GPIO);
     db_config.spi = perif.spi;
     db_config.rx_spi_slaveno = DB_RX_SEN;
     db_config.tx_spi_slaveno = DB_TX_SEN;
@@ -1295,16 +1297,16 @@ boost::uint32_t x300_impl::allocate_sid(mboard_members_t &mb, const sid_config_t
     return sid;
 }
 
-void x300_impl::update_atr_leds(gpio_core_200_32wo::sptr leds, const std::string &rx_ant)
+void x300_impl::update_atr_leds(gpio_atr_3000::sptr leds, const std::string &rx_ant)
 {
     const bool is_txrx = (rx_ant == "TX/RX");
     const int rx_led = (1 << 2);
     const int tx_led = (1 << 1);
     const int txrx_led = (1 << 0);
-    leds->set_atr_reg(dboard_iface::ATR_REG_IDLE, 0);
-    leds->set_atr_reg(dboard_iface::ATR_REG_RX_ONLY, is_txrx? txrx_led : rx_led);
-    leds->set_atr_reg(dboard_iface::ATR_REG_TX_ONLY, tx_led);
-    leds->set_atr_reg(dboard_iface::ATR_REG_FULL_DUPLEX, rx_led | tx_led);
+    leds->set_atr_reg(ATR_REG_IDLE, 0);
+    leds->set_atr_reg(ATR_REG_RX_ONLY, is_txrx? txrx_led : rx_led);
+    leds->set_atr_reg(ATR_REG_TX_ONLY, tx_led);
+    leds->set_atr_reg(ATR_REG_FULL_DUPLEX, rx_led | tx_led);
 }
 
 void x300_impl::set_tick_rate(mboard_members_t &mb, const double rate)
@@ -1509,30 +1511,6 @@ void x300_impl::set_mb_eeprom(i2c_iface::sptr i2c, const mboard_eeprom_t &mb_eep
 }
 
 /***********************************************************************
- * front-panel GPIO
- **********************************************************************/
-
-boost::uint32_t x300_impl::get_fp_gpio(gpio_core_200::sptr gpio)
-{
-    return boost::uint32_t(gpio->read_gpio(dboard_iface::UNIT_RX));
-}
-
-void x300_impl::set_fp_gpio(gpio_core_200::sptr gpio, const gpio_attr_t attr, const boost::uint32_t value)
-{
-    switch (attr)
-    {
-    case GPIO_CTRL:   return gpio->set_pin_ctrl(dboard_iface::UNIT_RX, value);
-    case GPIO_DDR:    return gpio->set_gpio_ddr(dboard_iface::UNIT_RX, value);
-    case GPIO_OUT:    return gpio->set_gpio_out(dboard_iface::UNIT_RX, value);
-    case GPIO_ATR_0X: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, value);
-    case GPIO_ATR_RX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, value);
-    case GPIO_ATR_TX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, value);
-    case GPIO_ATR_XX: return gpio->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, value);
-    default:        UHD_THROW_INVALID_CODE_PATH();
-    }
-}
-
-/***********************************************************************
  * claimer logic
  **********************************************************************/
 
diff --git a/host/lib/usrp/x300/x300_impl.hpp b/host/lib/usrp/x300/x300_impl.hpp
index 1630047af..c351e7f00 100644
--- a/host/lib/usrp/x300/x300_impl.hpp
+++ b/host/lib/usrp/x300/x300_impl.hpp
@@ -41,7 +41,7 @@
 #include "radio_ctrl_core_3000.hpp"
 #include "rx_frontend_core_200.hpp"
 #include "tx_frontend_core_200.hpp"
-#include "gpio_core_200.hpp"
+#include "gpio_atr_3000.hpp"
 #include <boost/weak_ptr.hpp>
 #include <uhd/usrp/gps_ctrl.hpp>
 #include <uhd/usrp/mboard_eeprom.hpp>
@@ -123,7 +123,7 @@ enum
 
 struct x300_dboard_iface_config_t
 {
-    gpio_core_200::sptr gpio;
+    uhd::usrp::gpio_atr::db_gpio_atr_3000::sptr gpio;
     spi_core_3000::sptr spi;
     size_t rx_spi_slaveno;
     size_t tx_spi_slaveno;
@@ -185,7 +185,7 @@ private:
         rx_dsp_core_3000::sptr ddc;
         tx_vita_core_3000::sptr deframer;
         tx_dsp_core_3000::sptr duc;
-        gpio_core_200_32wo::sptr leds;
+        uhd::usrp::gpio_atr::gpio_atr_3000::sptr leds;
         rx_frontend_core_200::sptr rx_fe;
         tx_frontend_core_200::sptr tx_fe;
         //Registers
@@ -229,7 +229,7 @@ private:
         //other perifs on mboard
         x300_clock_ctrl::sptr clock;
         uhd::gps_ctrl::sptr gps;
-        gpio_core_200::sptr fp_gpio;
+        uhd::usrp::gpio_atr::gpio_atr_3000::sptr fp_gpio;
 
         uhd::usrp::x300::fw_regmap_t::sptr fw_regmap;
 
@@ -365,9 +365,7 @@ private:
     void check_fw_compat(const uhd::fs_path &mb_path, uhd::wb_iface::sptr iface);
     void check_fpga_compat(const uhd::fs_path &mb_path, const mboard_members_t &members);
 
-    void update_atr_leds(gpio_core_200_32wo::sptr, const std::string &ant);
-    boost::uint32_t get_fp_gpio(gpio_core_200::sptr);
-    void set_fp_gpio(gpio_core_200::sptr, const gpio_attr_t, const boost::uint32_t);
+    void update_atr_leds(uhd::usrp::gpio_atr::gpio_atr_3000::sptr, const std::string &ant);
 
     void self_cal_adc_capture_delay(mboard_members_t& mb, const size_t radio_i, bool print_status = false);
     double self_cal_adc_xfer_delay(mboard_members_t& mb, bool apply_delay = false);