Merge branch 'fpga_next' into next

7 files changed, 96 insertions, 547 deletions

diff --git a/fpga/usrp2/top/E1x0/u1e.ucf b/fpga/usrp2/top/E1x0/E1x0.ucf
index 278fc289a..278fc289a 100644
--- a/fpga/usrp2/top/E1x0/u1e.ucf
+++ b/fpga/usrp2/top/E1x0/E1x0.ucf
diff --git a/fpga/usrp2/top/E1x0/u1e.v b/fpga/usrp2/top/E1x0/E1x0.v
index 903ef7a6f..e7b0a4e00 100644
--- a/fpga/usrp2/top/E1x0/u1e.v
+++ b/fpga/usrp2/top/E1x0/E1x0.v
@@ -1,5 +1,5 @@
 //
-// Copyright 2011 Ettus Research LLC
+// Copyright 2011-2012 Ettus Research LLC
 //
 // This program is free software: you can redistribute it and/or modify
 // it under the terms of the GNU General Public License as published by
@@ -18,7 +18,7 @@
 `timescale 1ns / 1ps
 //////////////////////////////////////////////////////////////////////////////////
 
-module u1e
+module E1x0
   (input CLK_FPGA_P, input CLK_FPGA_N,  // Diff
    output [3:0] debug_led, output [31:0] debug, output [1:0] debug_clk,
    input debug_pb, output FPGA_TXD, input FPGA_RXD,
@@ -52,13 +52,23 @@ module u1e
    input PPS_IN
    );
 
+    assign FPGA_TXD = 0; //dont care
+
    // /////////////////////////////////////////////////////////////////////////
    // Clocking
-   wire  clk_fpga;
+   wire clk_fpga;
+   wire reset;
+
+   reg async_reset;
+   always @(negedge EM_CLK) begin
+        async_reset <= ~EM_NCS6 && ~EM_NWE && (EM_A[9:2] == 8'hff) && EM_D[0];
+   end
 
    IBUFGDS #(.IOSTANDARD("LVDS_33"), .DIFF_TERM("TRUE")) 
    clk_fpga_pin (.O(clk_fpga),.I(CLK_FPGA_P),.IB(CLK_FPGA_N));
 
+   reset_sync reset_sync(.clk(clk_fpga), .reset_in(async_reset), .reset_out(reset));
+
    // /////////////////////////////////////////////////////////////////////////
    // UART level conversion
    assign fpga_txd1 = overo_txd1;
@@ -73,12 +83,12 @@ module u1e
    assign miso = (~db_sen_tx & db_miso_tx) | (~db_sen_rx & db_miso_rx) |
                  (~sen_codec & miso_codec) | (~cgen_sen_b & cgen_miso);
 
-   //assign the aux spi to the cgen (bypasses wishbone)
+   //assign the aux spi to the cgen (bypasses control fifo)
    assign cgen_sclk = overo_gpio65;
    assign cgen_sen_b = overo_gpio128;
    assign cgen_mosi = overo_gpio145;
-   wire proc_int; //re-purpose gpio for interrupt when we are not using aux spi
-   assign overo_gpio147 = (cgen_sen_b == 1'b0)? cgen_miso : proc_int;
+   wire has_resp; //re-purpose gpio for interrupt when we are not using aux spi
+   assign overo_gpio147 = (cgen_sen_b == 1'b0)? cgen_miso : has_resp;
 
    wire _cgen_sen_b;
    //assign cgen_sen_b = _cgen_sen_b; //replaced by aux spi
@@ -121,29 +131,66 @@ module u1e
 		.D1(1'b1),   // 1-bit data input (associated with C1)
 		.R(1'b0),       // 1-bit reset input
 		.S(1'b0));      // 1-bit set input
-   
+
    // /////////////////////////////////////////////////////////////////////////
-   // Main U1E Core
-   u1e_core u1e_core(.clk_fpga(clk_fpga), .rst_fpga(~debug_pb),
-		     .debug_led(debug_led), .debug(debug), .debug_clk(debug_clk),
-		     .debug_txd(FPGA_TXD), .debug_rxd(FPGA_RXD),
-		     .EM_CLK(EM_CLK), .EM_D(EM_D), .EM_A(EM_A), .EM_NBE(EM_NBE),
-		     .EM_WAIT0(EM_WAIT0), .EM_NCS4(EM_NCS4), .EM_NCS5(EM_NCS5), 
-		     .EM_NCS6(EM_NCS6), .EM_NWE(EM_NWE), .EM_NOE(EM_NOE),
-		     .db_sda(db_sda), .db_scl(db_scl),
-		     .sclk(sclk), .sen({_cgen_sen_b,sen_codec,db_sen_tx,db_sen_rx}), .mosi(mosi), .miso(miso),
-		     .cgen_st_status(cgen_st_status), .cgen_st_ld(cgen_st_ld),.cgen_st_refmon(cgen_st_refmon), 
-		     .cgen_sync_b(cgen_sync_b), .cgen_ref_sel(cgen_ref_sel),
-		     .tx_have_space(overo_gpio144),
-		     .rx_have_data(overo_gpio146),
-		     .io_tx(io_tx), .io_rx(io_rx),
-		     .tx_i(tx_i), .tx_q(tx_q), 
-		     .rx_i(DA), .rx_q(DB),
-		     .pps_in(PPS_IN), .proc_int(proc_int) );
+   // Main Core
+   wire [35:0] rx_data, tx_data, ctrl_data, resp_data;
+   wire rx_src_rdy, rx_dst_rdy, tx_src_rdy, tx_dst_rdy, resp_src_rdy, resp_dst_rdy, ctrl_src_rdy, ctrl_dst_rdy;
+   wire dsp_rx_run, dsp_tx_run;
+   wire [7:0] sen8;
+   assign {_cgen_sen_b,sen_codec,db_sen_tx,db_sen_rx} = sen8[3:0];
+   wire [31:0] core_debug;
+
+   assign debug_led = ~{PPS_IN, dsp_tx_run, dsp_rx_run, cgen_st_ld};
+   wire cgen_sync;
+   assign { cgen_sync_b, cgen_ref_sel } = {~cgen_sync, 1'b1};
+
+   u1plus_core #(
+        .NUM_RX_DSPS(2),
+        .DSP_RX_XTRA_FIFOSIZE(10),
+        .DSP_TX_XTRA_FIFOSIZE(10),
+        .USE_PACKET_PADDER(0)
+    ) core(
+         .clk(clk_fpga), .reset(reset),
+         .debug(core_debug), .debug_clk(debug_clk),
+
+         .rx_data(rx_data), .rx_src_rdy(rx_src_rdy), .rx_dst_rdy(rx_dst_rdy),
+         .tx_data(tx_data), .tx_src_rdy(tx_src_rdy), .tx_dst_rdy(tx_dst_rdy),
+         .ctrl_data(ctrl_data), .ctrl_src_rdy(ctrl_src_rdy), .ctrl_dst_rdy(ctrl_dst_rdy),
+         .resp_data(resp_data), .resp_src_rdy(resp_src_rdy), .resp_dst_rdy(resp_dst_rdy),
+
+         .dsp_rx_run(dsp_rx_run), .dsp_tx_run(dsp_tx_run),
+         .clock_sync(cgen_sync),
+
+         .db_sda(db_sda), .db_scl(db_scl),
+         .sclk(sclk), .sen(sen8), .mosi(mosi), .miso(miso),
+         .io_tx(io_tx), .io_rx(io_rx),
+         .tx_i(tx_i), .tx_q(tx_q),
+         .rx_i(DA), .rx_q(DB),
+         .pps_in(PPS_IN) );
 
    // /////////////////////////////////////////////////////////////////////////
-   // Local Debug
-   // assign debug_clk = {clk_fpga, clk_2x };
-   // assign debug = { TXSYNC, TXBLANK, TX };
-   
-endmodule // u1e
+   // Interface between GPMC/host
+    wire [31:0] gpmc_debug;
+
+   gpmc #(.TXFIFOSIZE(13), .RXFIFOSIZE(13))
+   gpmc (.arst(async_reset),
+         .EM_CLK(EM_CLK), .EM_D(EM_D), .EM_A(EM_A), .EM_NBE(EM_NBE),
+         .EM_WAIT0(EM_WAIT0), .EM_NCS4(EM_NCS4), .EM_NCS6(EM_NCS6), .EM_NWE(EM_NWE),
+         .EM_NOE(EM_NOE),
+
+         .rx_have_data(overo_gpio146), .tx_have_space(overo_gpio144),
+         .resp_have_data(has_resp),
+
+         .fifo_clk(clk_fpga), .fifo_rst(reset),
+         .rx_data(rx_data), .rx_src_rdy(rx_src_rdy), .rx_dst_rdy(rx_dst_rdy),
+         .tx_data(tx_data), .tx_src_rdy(tx_src_rdy), .tx_dst_rdy(tx_dst_rdy),
+         .ctrl_data(ctrl_data), .ctrl_src_rdy(ctrl_src_rdy), .ctrl_dst_rdy(ctrl_dst_rdy),
+         .resp_data(resp_data), .resp_src_rdy(resp_src_rdy), .resp_dst_rdy(resp_dst_rdy),
+
+         .debug(gpmc_debug));
+
+    //assign debug = gpmc_debug;
+    assign debug = core_debug;
+
+endmodule // E1x0
diff --git a/fpga/usrp2/top/E1x0/Makefile.E100 b/fpga/usrp2/top/E1x0/Makefile.E100
index 3ba7e1031..92334d987 100644
--- a/fpga/usrp2/top/E1x0/Makefile.E100
+++ b/fpga/usrp2/top/E1x0/Makefile.E100
@@ -5,7 +5,7 @@
 ##################################################
 # Project Setup
 ##################################################
-TOP_MODULE = u1e
+TOP_MODULE = E1x0
 BUILD_DIR = $(abspath build$(ISE)-E100)
 
 # set me in a custom makefile
@@ -48,9 +48,9 @@ simulator "ISE Simulator (VHDL/Verilog)" \
 # Sources
 ##################################################
 TOP_SRCS = \
-u1e_core.v \
-u1e.v \
-u1e.ucf \
+../B100/u1plus_core.v \
+E1x0.v \
+E1x0.ucf \
 timing.ucf
 
 SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \
diff --git a/fpga/usrp2/top/E1x0/Makefile.E110 b/fpga/usrp2/top/E1x0/Makefile.E110
index 89e51b523..e5be8d2fa 100644
--- a/fpga/usrp2/top/E1x0/Makefile.E110
+++ b/fpga/usrp2/top/E1x0/Makefile.E110
@@ -5,7 +5,7 @@
 ##################################################
 # Project Setup
 ##################################################
-TOP_MODULE = u1e
+TOP_MODULE = E1x0
 BUILD_DIR = $(abspath build$(ISE)-E110)
 
 # set me in a custom makefile
@@ -48,9 +48,9 @@ simulator "ISE Simulator (VHDL/Verilog)" \
 # Sources
 ##################################################
 TOP_SRCS = \
-u1e_core.v \
-u1e.v \
-u1e.ucf \
+../B100/u1plus_core.v \
+E1x0.v \
+E1x0.ucf \
 timing.ucf
 
 SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \
diff --git a/fpga/usrp2/top/E1x0/core_compile b/fpga/usrp2/top/E1x0/core_compile
index 14e138fa3..dd88094ff 100755
--- a/fpga/usrp2/top/E1x0/core_compile
+++ b/fpga/usrp2/top/E1x0/core_compile
@@ -1,3 +1,3 @@
-iverilog -Wall -y. -y ../../control_lib/ -y ../../custom/ -y ../../fifo/ -y ../../gpmc/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../../simple_gemac -y $XILINX/verilog/src/unisims u1e_core.v  2>&1  | grep -v timescale | grep -v coregen | grep -v models
+iverilog -Wall -y. -y ../../control_lib/ -y ../../custom/ -y ../../fifo/ -y ../../gpmc/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../B100 -y $XILINX/verilog/src/unisims E100.v  2>&1  | grep -v timescale | grep -v coregen | grep -v models
 
 
diff --git a/fpga/usrp2/top/E1x0/timing.ucf b/fpga/usrp2/top/E1x0/timing.ucf
index 47c250c2f..6bd559426 100644
--- a/fpga/usrp2/top/E1x0/timing.ucf
+++ b/fpga/usrp2/top/E1x0/timing.ucf
@@ -3,25 +3,21 @@ NET "CLK_FPGA_P" TNM_NET = "CLK_FPGA_P";
 TIMESPEC "TS_clk_fpga_p" = PERIOD "CLK_FPGA_P" 15625 ps HIGH 50 %;
 
 NET "EM_CLK" TNM_NET = "EM_CLK";
-TIMESPEC "TS_em_clk" = PERIOD "EM_CLK" 12048 ps HIGH 50 %;
+TIMESPEC "TS_em_clk" = PERIOD "EM_CLK" 18867 ps HIGH 50 %;
 
 #constrain GPMC IO
-NET "EM_D<*>" MAXDELAY = 5.5 ns;
-NET "EM_A<*>" MAXDELAY = 5.5 ns;
-NET "EM_NBE<*>" MAXDELAY = 5.5 ns;
-NET "EM_NCS4" MAXDELAY = 5.5 ns;
-NET "EM_NCS6" MAXDELAY = 5.5 ns;
-NET "EM_NWE" MAXDELAY = 5.5 ns;
-NET "EM_NOE" MAXDELAY = 5.5 ns;
+INST "EM_D<*>" TNM = gpmc_net_out;
+INST "EM_D<*>" TNM = gpmc_net;
+INST "EM_A<*>" TNM = gpmc_net;
+INST "EM_NCS4" TNM = gpmc_net;
+INST "EM_NCS6" TNM = gpmc_net;
+INST "EM_NWE" TNM = gpmc_net;
+INST "EM_NOE" TNM = gpmc_net;
+
+TIMEGRP "gpmc_net" OFFSET = IN 7 ns VALID 14 ns BEFORE "EM_CLK" FALLING;
+TIMEGRP "gpmc_net_out" OFFSET = OUT 14 ns AFTER "EM_CLK" RISING; //2 clock cyc per read
 
 #constrain interrupt lines
 NET "overo_gpio144" MAXDELAY = 5.5 ns; #have space
 NET "overo_gpio146" MAXDELAY = 5.5 ns; #have data
 NET "overo_gpio147" MAXDELAY = 5.5 ns; #have msg/aux spi miso
-
-#NET "adc_a<*>" TNM_NET = ADC_DATA_GRP;
-#NET "adc_b<*>" TNM_NET = ADC_DATA_GRP;
-#TIMEGRP "ADC_DATA_GRP" OFFSET = IN 1 ns VALID 5 ns BEFORE "clk_fpga_p" RISING;
-
-#NET "adc_a<*>" OFFSET = IN 1 ns VALID 5 ns BEFORE "clk_fpga_p" RISING;
-#NET "adc_b<*>" OFFSET = IN 1 ns VALID 5 ns BEFORE "clk_fpga_p" RISING;
diff --git a/fpga/usrp2/top/E1x0/u1e_core.v b/fpga/usrp2/top/E1x0/u1e_core.v
deleted file mode 100644
index fef988e62..000000000
--- a/fpga/usrp2/top/E1x0/u1e_core.v
+++ /dev/null
@@ -1,494 +0,0 @@
-//
-// Copyright 2011-2012 Ettus Research LLC
-//
-// This program is free software: you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program.  If not, see <http://www.gnu.org/licenses/>.
-//
-
-
-
-module u1e_core
-  (input clk_fpga, input rst_fpga,
-   output [3:0] debug_led, output [31:0] debug, output [1:0] debug_clk,
-   output debug_txd, input debug_rxd,
-   
-   // GPMC
-   input EM_CLK, inout [15:0] EM_D, input [10:1] EM_A, input [1:0] EM_NBE,
-   input EM_WAIT0, input EM_NCS4, input EM_NCS5, input EM_NCS6,
-   input EM_NWE, input EM_NOE,
-   
-   inout db_sda, inout db_scl,
-   output sclk, output [15:0] sen, output mosi, input miso,
-
-   input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel,   
-   output tx_have_space, output rx_have_data,
-   inout [15:0] io_tx, inout [15:0] io_rx, 
-   output [13:0] tx_i, output [13:0] tx_q, 
-   input [11:0] rx_i, input [11:0] rx_q, 
-   
-   input pps_in, output reg proc_int
-   );
-
-   localparam TXFIFOSIZE = 13;
-   localparam RXFIFOSIZE = 13;
-
-   // 64 total regs in address space
-   localparam SR_RX_CTRL0 = 0;       // 9 regs (+0 to +8)
-   localparam SR_RX_DSP0 = 10;       // 4 regs (+0 to +3)
-   localparam SR_RX_CTRL1 = 16;      // 9 regs (+0 to +8)
-   localparam SR_RX_DSP1 = 26;       // 4 regs (+0 to +3)
-   localparam SR_ERR_CTRL = 30;      // 1 reg
-   localparam SR_TX_CTRL = 32;       // 4 regs (+0 to +3)
-   localparam SR_TX_DSP = 38;        // 3 regs (+0 to +2)
-
-   localparam SR_TIME64 = 42;        // 6 regs (+0 to +5)
-   localparam SR_RX_FRONT = 48;      // 5 regs (+0 to +4)
-   localparam SR_TX_FRONT = 54;      // 5 regs (+0 to +4)
-
-   localparam SR_REG_TEST32 = 60;    // 1 reg
-   localparam SR_CLEAR_FIFO = 61;    // 1 reg
-   localparam SR_GLOBAL_RESET = 63;  // 1 reg
-   localparam SR_USER_REGS = 64;     // 2 regs
-
-   localparam SR_GPIO = 128;         // 5 regs
-   
-   wire 	wb_clk = clk_fpga;
-   wire 	wb_rst, global_reset;
-
-   wire 	pps_int;
-   wire [63:0] 	vita_time, vita_time_pps;
-   reg [15:0] 	reg_cgen_ctrl, reg_test, xfer_rate;
-   wire [7:0] 	test_rate;
-   wire [3:0] 	test_ctrl;
-
-   wire [7:0]  set_addr, set_addr_user;
-   wire [31:0] set_data, set_data_user;
-   wire        set_stb, set_stb_user;
-
-   wire [31:0] 	debug_vt;
-   wire 	rx_overrun_dsp0, rx_overrun_dsp1, rx_overrun_gpmc, tx_underrun_dsp, tx_underrun_gpmc;
-   wire 	rx_overrun = rx_overrun_gpmc | rx_overrun_dsp0 | rx_overrun_dsp1;
-   wire 	tx_underrun = tx_underrun_gpmc | tx_underrun_dsp;
-   
-   setting_reg #(.my_addr(SR_GLOBAL_RESET), .width(1)) sr_reset
-     (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
-      .in(set_data),.out(),.changed(global_reset));
-
-   reset_sync reset_sync(.clk(wb_clk), .reset_in(rst_fpga | global_reset), .reset_out(wb_rst));
-   
-   // /////////////////////////////////////////////////////////////////////////////////////
-   // GPMC Slave to Wishbone Master
-   localparam dw = 16;
-   localparam aw = 11;
-   localparam sw = 2;
-   
-   wire [dw-1:0] m0_dat_mosi, m0_dat_miso;
-   wire [aw-1:0] m0_adr;
-   wire [sw-1:0] m0_sel;
-   wire 	 m0_cyc, m0_stb, m0_we, m0_ack, m0_err, m0_rty;
-
-   wire [31:0] 	 debug_gpmc;
-
-   wire [35:0] 	 tx_data, rx_data, tx_err_data;
-   wire 	 tx_src_rdy, tx_dst_rdy, rx_src_rdy, rx_dst_rdy, 
-		 tx_err_src_rdy, tx_err_dst_rdy;
-
-   wire 	 clear_fifo;
-
-   setting_reg #(.my_addr(SR_CLEAR_FIFO), .width(1)) sr_clear_fifo
-     (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
-      .in(set_data),.out(),.changed(clear_fifo));
-
-   wire 	 run_rx0, run_rx1;
-
-   gpmc #(.TXFIFOSIZE(TXFIFOSIZE), .RXFIFOSIZE(RXFIFOSIZE))
-   gpmc (.arst(wb_rst),
-	 .EM_CLK(EM_CLK), .EM_D(EM_D), .EM_A(EM_A), .EM_NBE(EM_NBE),
-	 .EM_WAIT0(EM_WAIT0), .EM_NCS4(EM_NCS4), .EM_NCS6(EM_NCS6), .EM_NWE(EM_NWE), 
-	 .EM_NOE(EM_NOE),
-	 
-	 .rx_have_data(rx_have_data), .tx_have_space(tx_have_space),
-	 
-	 .wb_clk(wb_clk), .wb_rst(wb_rst),
-	 .wb_adr_o(m0_adr), .wb_dat_mosi(m0_dat_mosi), .wb_dat_miso(m0_dat_miso),
-	 .wb_sel_o(m0_sel), .wb_cyc_o(m0_cyc), .wb_stb_o(m0_stb), .wb_we_o(m0_we),
-	 .wb_ack_i(m0_ack),
-	 
-	 .fifo_clk(wb_clk), .fifo_rst(wb_rst), .clear_tx(clear_fifo), .clear_rx(clear_fifo),
-	 .tx_data_o(tx_data), .tx_src_rdy_o(tx_src_rdy), .tx_dst_rdy_i(tx_dst_rdy),
-	 .rx_data_i(rx_data), .rx_src_rdy_i(rx_src_rdy), .rx_dst_rdy_o(rx_dst_rdy),
-
-	 .tx_underrun(tx_underrun_gpmc), .rx_overrun(rx_overrun_gpmc),
-
-	 .test_rate(test_rate), .test_ctrl(test_ctrl),
-	 .debug(debug_gpmc));
-
-   wire 	 rx_src_rdy_int, rx_dst_rdy_int, tx_src_rdy_int, tx_dst_rdy_int;
-   
-   wire [31:0] 	 debug_rx_dsp, vrc_debug, vrf_debug, vr_debug;
-   
-   // /////////////////////////////////////////////////////////////////////////
-   // RX ADC Frontend, does IQ Balance, DC Offset, muxing
-
-   wire [23:0] 	 rx_fe_i, rx_fe_q;  // 24 bits is total overkill here, but it matches u2/u2p
-
-   rx_frontend #(.BASE(SR_RX_FRONT)) rx_frontend
-     (.clk(wb_clk),.rst(wb_rst),
-      .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-      .adc_a({rx_i,4'b00}),.adc_ovf_a(0),
-      .adc_b({rx_q,4'b00}),.adc_ovf_b(0),
-      .i_out(rx_fe_i), .q_out(rx_fe_q), .run(run_rx0 | run_rx1), .debug());
-   
-   // /////////////////////////////////////////////////////////////////////////
-   // DSP RX 0
-
-   wire [31:0] 	 sample_rx0;
-   wire 	 strobe_rx0, clear_rx0;
-   wire [35:0] 	 vita_rx_data0;
-   wire 	 vita_rx_src_rdy0, vita_rx_dst_rdy0;
-   
-   ddc_chain #(.BASE(SR_RX_DSP0), .DSPNO(0)) ddc_chain0
-     (.clk(wb_clk), .rst(wb_rst), .clr(clear_rx0),
-      .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-      .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user),
-      .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q),
-      .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0),
-      .debug() );
-
-   vita_rx_chain #(.BASE(SR_RX_CTRL0), .UNIT(0), .FIFOSIZE(10), .PROT_ENG_FLAGS(0), .DSP_NUMBER(0)) vita_rx_chain0
-     (.clk(wb_clk),.reset(wb_rst),
-      .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-      .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user),
-      .vita_time(vita_time), .overrun(rx_overrun_dsp0),
-      .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), .clear_o(clear_rx0),
-      .rx_data_o(vita_rx_data0), .rx_dst_rdy_i(vita_rx_dst_rdy0), .rx_src_rdy_o(vita_rx_src_rdy0),
-      .debug() );
-   
-   // /////////////////////////////////////////////////////////////////////////
-   // DSP RX 1
-
-   wire [31:0] 	 sample_rx1;
-   wire 	 strobe_rx1, clear_rx1;
-   wire [35:0] 	 vita_rx_data1;
-   wire 	 vita_rx_src_rdy1, vita_rx_dst_rdy1;
-   
-   ddc_chain #(.BASE(SR_RX_DSP1), .DSPNO(1)) ddc_chain1
-     (.clk(wb_clk),.rst(wb_rst), .clr(clear_rx1),
-      .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-      .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user),
-      .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q),
-      .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1),
-      .debug() );
-
-   vita_rx_chain #(.BASE(SR_RX_CTRL1), .UNIT(1), .FIFOSIZE(10), .PROT_ENG_FLAGS(0), .DSP_NUMBER(1)) vita_rx_chain1
-     (.clk(wb_clk),.reset(wb_rst),
-      .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-      .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user),
-      .vita_time(vita_time), .overrun(rx_overrun_dsp1),
-      .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), .clear_o(clear_rx1),
-      .rx_data_o(vita_rx_data1), .rx_dst_rdy_i(vita_rx_dst_rdy1), .rx_src_rdy_o(vita_rx_src_rdy1),
-      .debug() );
-
-   // /////////////////////////////////////////////////////////////////////////
-   // RX Stream muxing
-
-   fifo36_mux #(.prio(0)) mux_data_streams
-     (.clk(wb_clk), .reset(wb_rst), .clear(clear_fifo),
-      .data0_i(vita_rx_data0), .src0_rdy_i(vita_rx_src_rdy0), .dst0_rdy_o(vita_rx_dst_rdy0),
-      .data1_i(vita_rx_data1), .src1_rdy_i(vita_rx_src_rdy1), .dst1_rdy_o(vita_rx_dst_rdy1),
-      .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy));
-
-   // ///////////////////////////////////////////////////////////////////////////////////
-   // DSP TX
-
-   wire 	 run_tx;
-   wire [23:0] 	 tx_fe_i, tx_fe_q;
-   wire [31:0]   sample_tx;
-   wire strobe_tx, clear_tx;
-
-   vita_tx_chain #(.BASE(SR_TX_CTRL), .FIFOSIZE(10), .POST_ENGINE_FIFOSIZE(11),
-		   .REPORT_ERROR(1), .DO_FLOW_CONTROL(0),
-		   .PROT_ENG_FLAGS(0), .USE_TRANS_HEADER(0),
-		   .DSP_NUMBER(0)) 
-   vita_tx_chain
-     (.clk(wb_clk), .reset(wb_rst),
-      .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-      .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user),
-      .vita_time(vita_time),
-      .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy),
-      .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy),
-      .sample(sample_tx), .strobe(strobe_tx),
-      .underrun(tx_underrun_dsp), .run(run_tx), .clear_o(clear_tx),
-      .debug(debug_vt));
-
-   duc_chain #(.BASE(SR_TX_DSP), .DSPNO(0)) duc_chain
-     (.clk(wb_clk), .rst(wb_rst), .clr(clear_tx),
-      .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-      .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user),
-      .tx_fe_i(tx_fe_i),.tx_fe_q(tx_fe_q),
-      .sample(sample_tx), .run(run_tx), .strobe(strobe_tx),
-      .debug() );
-
-   tx_frontend #(.BASE(SR_TX_FRONT), .WIDTH_OUT(14)) tx_frontend
-     (.clk(wb_clk), .rst(wb_rst),
-      .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-      .tx_i(tx_fe_i), .tx_q(tx_fe_q), .run(1'b1),
-      .dac_a(tx_i), .dac_b(tx_q));
-
-   // /////////////////////////////////////////////////////////////////////////////////////
-   // Wishbone Intercon, single master
-   wire [dw-1:0] s0_dat_mosi, s1_dat_mosi, s0_dat_miso, s1_dat_miso, s2_dat_mosi, s3_dat_mosi, s2_dat_miso, s3_dat_miso,
-		 s4_dat_mosi, s5_dat_mosi, s4_dat_miso, s5_dat_miso, s6_dat_mosi, s7_dat_mosi, s6_dat_miso, s7_dat_miso,
-		 s8_dat_mosi, s9_dat_mosi, s8_dat_miso, s9_dat_miso, sa_dat_mosi, sb_dat_mosi, sa_dat_miso, sb_dat_miso,
-		 sc_dat_mosi, sd_dat_mosi, sc_dat_miso, sd_dat_miso, se_dat_mosi, sf_dat_mosi, se_dat_miso, sf_dat_miso;
-   wire [aw-1:0] s0_adr,s1_adr,s2_adr,s3_adr,s4_adr,s5_adr,s6_adr,s7_adr;
-   wire [aw-1:0] s8_adr,s9_adr,sa_adr,sb_adr,sc_adr, sd_adr, se_adr, sf_adr;
-   wire [sw-1:0] s0_sel,s1_sel,s2_sel,s3_sel,s4_sel,s5_sel,s6_sel,s7_sel;
-   wire [sw-1:0] s8_sel,s9_sel,sa_sel,sb_sel,sc_sel, sd_sel, se_sel, sf_sel;
-   wire 	 s0_ack,s1_ack,s2_ack,s3_ack,s4_ack,s5_ack,s6_ack,s7_ack;
-   wire 	 s8_ack,s9_ack,sa_ack,sb_ack,sc_ack, sd_ack, se_ack, sf_ack;
-   wire 	 s0_stb,s1_stb,s2_stb,s3_stb,s4_stb,s5_stb,s6_stb,s7_stb;
-   wire 	 s8_stb,s9_stb,sa_stb,sb_stb,sc_stb, sd_stb, se_stb, sf_stb;
-   wire 	 s0_cyc,s1_cyc,s2_cyc,s3_cyc,s4_cyc,s5_cyc,s6_cyc,s7_cyc;
-   wire 	 s8_cyc,s9_cyc,sa_cyc,sb_cyc,sc_cyc, sd_cyc, se_cyc, sf_cyc;
-   wire 	 s0_we,s1_we,s2_we,s3_we,s4_we,s5_we,s6_we,s7_we;
-   wire 	 s8_we,s9_we,sa_we,sb_we,sc_we,sd_we, se_we, sf_we;
-   
-   wb_1master #(.dw(dw), .aw(aw), .sw(sw), .decode_w(4),
-		.s0_addr(4'h0), .s0_mask(4'hF), // Misc Regs
-		.s1_addr(4'h1), .s1_mask(4'hF), // Unused
-		.s2_addr(4'h2), .s2_mask(4'hF),	// SPI
-		.s3_addr(4'h3), .s3_mask(4'hF), // I2C
-		.s4_addr(4'h4), .s4_mask(4'hF),	// Unused
-		.s5_addr(4'h5), .s5_mask(4'hF), // Unused on B1x0, Async Msg on E1x0
-		.s6_addr(4'h6), .s6_mask(4'hF),	// Unused
-		.s7_addr(4'h7), .s7_mask(4'hF), // Readback MUX
-		.s8_addr(4'h8), .s8_mask(4'h8), // Setting Regs -- slave 8 is 8 slaves wide
-		// slaves 9-f alias to slave 1, all are unused
-		.s9_addr(4'h1), .s9_mask(4'hF),
-		.sa_addr(4'h1), .sa_mask(4'hF),	.sb_addr(4'h1), .sb_mask(4'hF),
-		.sc_addr(4'h1), .sc_mask(4'hF),	.sd_addr(4'h1), .sd_mask(4'hF),
-		.se_addr(4'h1), .se_mask(4'hF),	.sf_addr(4'h1), .sf_mask(4'hF))
-   wb_1master
-     (.clk_i(wb_clk),.rst_i(wb_rst),       
-      .m0_dat_o(m0_dat_miso),.m0_ack_o(m0_ack),.m0_err_o(m0_err),.m0_rty_o(m0_rty),.m0_dat_i(m0_dat_mosi),
-      .m0_adr_i(m0_adr),.m0_sel_i(m0_sel),.m0_we_i(m0_we),.m0_cyc_i(m0_cyc),.m0_stb_i(m0_stb),
-      .s0_dat_o(s0_dat_mosi),.s0_adr_o(s0_adr),.s0_sel_o(s0_sel),.s0_we_o(s0_we),.s0_cyc_o(s0_cyc),.s0_stb_o(s0_stb),
-      .s0_dat_i(s0_dat_miso),.s0_ack_i(s0_ack),.s0_err_i(0),.s0_rty_i(0),
-      .s1_dat_o(s1_dat_mosi),.s1_adr_o(s1_adr),.s1_sel_o(s1_sel),.s1_we_o(s1_we),.s1_cyc_o(s1_cyc),.s1_stb_o(s1_stb),
-      .s1_dat_i(s1_dat_miso),.s1_ack_i(s1_ack),.s1_err_i(0),.s1_rty_i(0),
-      .s2_dat_o(s2_dat_mosi),.s2_adr_o(s2_adr),.s2_sel_o(s2_sel),.s2_we_o(s2_we),.s2_cyc_o(s2_cyc),.s2_stb_o(s2_stb),
-      .s2_dat_i(s2_dat_miso),.s2_ack_i(s2_ack),.s2_err_i(0),.s2_rty_i(0),
-      .s3_dat_o(s3_dat_mosi),.s3_adr_o(s3_adr),.s3_sel_o(s3_sel),.s3_we_o(s3_we),.s3_cyc_o(s3_cyc),.s3_stb_o(s3_stb),
-      .s3_dat_i(s3_dat_miso),.s3_ack_i(s3_ack),.s3_err_i(0),.s3_rty_i(0),
-      .s4_dat_o(s4_dat_mosi),.s4_adr_o(s4_adr),.s4_sel_o(s4_sel),.s4_we_o(s4_we),.s4_cyc_o(s4_cyc),.s4_stb_o(s4_stb),
-      .s4_dat_i(s4_dat_miso),.s4_ack_i(s4_ack),.s4_err_i(0),.s4_rty_i(0),
-      .s5_dat_o(s5_dat_mosi),.s5_adr_o(s5_adr),.s5_sel_o(s5_sel),.s5_we_o(s5_we),.s5_cyc_o(s5_cyc),.s5_stb_o(s5_stb),
-      .s5_dat_i(s5_dat_miso),.s5_ack_i(s5_ack),.s5_err_i(0),.s5_rty_i(0),
-      .s6_dat_o(s6_dat_mosi),.s6_adr_o(s6_adr),.s6_sel_o(s6_sel),.s6_we_o(s6_we),.s6_cyc_o(s6_cyc),.s6_stb_o(s6_stb),
-      .s6_dat_i(s6_dat_miso),.s6_ack_i(s6_ack),.s6_err_i(0),.s6_rty_i(0),
-      .s7_dat_o(s7_dat_mosi),.s7_adr_o(s7_adr),.s7_sel_o(s7_sel),.s7_we_o(s7_we),.s7_cyc_o(s7_cyc),.s7_stb_o(s7_stb),
-      .s7_dat_i(s7_dat_miso),.s7_ack_i(s7_ack),.s7_err_i(0),.s7_rty_i(0),
-      .s8_dat_o(s8_dat_mosi),.s8_adr_o(s8_adr),.s8_sel_o(s8_sel),.s8_we_o(s8_we),.s8_cyc_o(s8_cyc),.s8_stb_o(s8_stb),
-      .s8_dat_i(s8_dat_miso),.s8_ack_i(s8_ack),.s8_err_i(0),.s8_rty_i(0),
-      .s9_dat_o(s9_dat_mosi),.s9_adr_o(s9_adr),.s9_sel_o(s9_sel),.s9_we_o(s9_we),.s9_cyc_o(s9_cyc),.s9_stb_o(s9_stb),
-      .s9_dat_i(s9_dat_miso),.s9_ack_i(s9_ack),.s9_err_i(0),.s9_rty_i(0),
-      .sa_dat_o(sa_dat_mosi),.sa_adr_o(sa_adr),.sa_sel_o(sa_sel),.sa_we_o(sa_we),.sa_cyc_o(sa_cyc),.sa_stb_o(sa_stb),
-      .sa_dat_i(sa_dat_miso),.sa_ack_i(sa_ack),.sa_err_i(0),.sa_rty_i(0),
-      .sb_dat_o(sb_dat_mosi),.sb_adr_o(sb_adr),.sb_sel_o(sb_sel),.sb_we_o(sb_we),.sb_cyc_o(sb_cyc),.sb_stb_o(sb_stb),
-      .sb_dat_i(sb_dat_miso),.sb_ack_i(sb_ack),.sb_err_i(0),.sb_rty_i(0),
-      .sc_dat_o(sc_dat_mosi),.sc_adr_o(sc_adr),.sc_sel_o(sc_sel),.sc_we_o(sc_we),.sc_cyc_o(sc_cyc),.sc_stb_o(sc_stb),
-      .sc_dat_i(sc_dat_miso),.sc_ack_i(sc_ack),.sc_err_i(0),.sc_rty_i(0),
-      .sd_dat_o(sd_dat_mosi),.sd_adr_o(sd_adr),.sd_sel_o(sd_sel),.sd_we_o(sd_we),.sd_cyc_o(sd_cyc),.sd_stb_o(sd_stb),
-      .sd_dat_i(sd_dat_miso),.sd_ack_i(sd_ack),.sd_err_i(0),.sd_rty_i(0),
-      .se_dat_o(se_dat_mosi),.se_adr_o(se_adr),.se_sel_o(se_sel),.se_we_o(se_we),.se_cyc_o(se_cyc),.se_stb_o(se_stb),
-      .se_dat_i(se_dat_miso),.se_ack_i(se_ack),.se_err_i(0),.se_rty_i(0),
-      .sf_dat_o(sf_dat_mosi),.sf_adr_o(sf_adr),.sf_sel_o(sf_sel),.sf_we_o(sf_we),.sf_cyc_o(sf_cyc),.sf_stb_o(sf_stb),
-      .sf_dat_i(sf_dat_miso),.sf_ack_i(sf_ack),.sf_err_i(0),.sf_rty_i(0) );
-
-   assign s1_ack = 0;   assign s4_ack = 0;   assign s6_ack = 0;
-   assign s9_ack = 0;   assign sa_ack = 0;   assign sb_ack = 0;
-   assign sc_ack = 0;   assign sd_ack = 0;   assign se_ack = 0;   assign sf_ack = 0;
-
-   // /////////////////////////////////////////////////////////////////////////////////////
-   // Slave 0, Misc LEDs, Switches, controls
-   
-   localparam REG_CGEN_CTRL = 7'd4;    // out
-   localparam REG_CGEN_ST = 7'd6;      // in
-   localparam REG_TEST = 7'd8;         // out
-   localparam REG_XFER_RATE = 7'd14;   // out
-   
-   always @(posedge wb_clk)
-     if(wb_rst)
-       begin
-	  reg_cgen_ctrl <= 2'b11;
-	  reg_test <= 0;
-	  xfer_rate <= 0;
-       end
-     else
-       if(s0_cyc & s0_stb & s0_we) 
-	 case(s0_adr[6:0])
-	   REG_CGEN_CTRL :
-	     reg_cgen_ctrl <= s0_dat_mosi;
-	   REG_TEST :
-	     reg_test <= s0_dat_mosi;
-	   REG_XFER_RATE :
-	     xfer_rate <= s0_dat_mosi;
-	 endcase // case (s0_adr[6:0])
-
-   assign test_ctrl = xfer_rate[11:8];
-   assign test_rate = xfer_rate[7:0];
-   
-   assign { debug_led[3:0] } = ~{1'b1, run_tx, run_rx0 | run_rx1, cgen_st_ld};
-   assign { cgen_sync_b, cgen_ref_sel } = reg_cgen_ctrl;
-   
-   assign s0_dat_miso = (s0_adr[6:0] == REG_CGEN_CTRL) ? reg_cgen_ctrl :
-			(s0_adr[6:0] == REG_CGEN_ST) ? {13'b0,cgen_st_status,cgen_st_ld,cgen_st_refmon} :
-			(s0_adr[6:0] == REG_TEST) ? reg_test :
-			16'hBEEF;
-   
-   assign s0_ack = s0_stb & s0_cyc;
-
-   // /////////////////////////////////////////////////////////////////////////////////////
-   // Slave 2, SPI
-
-   spi_top16 shared_spi
-     (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst),.wb_adr_i(s2_adr[4:0]),.wb_dat_i(s2_dat_mosi),
-      .wb_dat_o(s2_dat_miso),.wb_sel_i(s2_sel),.wb_we_i(s2_we),.wb_stb_i(s2_stb),
-      .wb_cyc_i(s2_cyc),.wb_ack_o(s2_ack),.wb_err_o(),.wb_int_o(),
-      .ss_pad_o(sen), .sclk_pad_o(sclk), .mosi_pad_o(mosi), .miso_pad_i(miso) );
-   
-   // /////////////////////////////////////////////////////////////////////////
-   // Slave 3, I2C
-
-   wire 	scl_pad_i, scl_pad_o, scl_pad_oen_o, sda_pad_i, sda_pad_o, sda_pad_oen_o;
-   i2c_master_top #(.ARST_LVL(1)) i2c 
-     (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst),.arst_i(1'b0), 
-      .wb_adr_i(s3_adr[3:1]),.wb_dat_i(s3_dat_mosi[7:0]),.wb_dat_o(s3_dat_miso[7:0]),
-      .wb_we_i(s3_we),.wb_stb_i(s3_stb),.wb_cyc_i(s3_cyc),
-      .wb_ack_o(s3_ack),.wb_inta_o(),
-      .scl_pad_i(scl_pad_i),.scl_pad_o(scl_pad_o),.scl_padoen_o(scl_pad_oen_o),
-      .sda_pad_i(sda_pad_i),.sda_pad_o(sda_pad_o),.sda_padoen_o(sda_pad_oen_o) );
-
-   assign 	 s3_dat_miso[15:8] = 8'd0;
-
-   // I2C -- Don't use external transistors for open drain, the FPGA implements this
-   IOBUF scl_pin(.O(scl_pad_i), .IO(db_scl), .I(scl_pad_o), .T(scl_pad_oen_o));
-   IOBUF sda_pin(.O(sda_pad_i), .IO(db_sda), .I(sda_pad_o), .T(sda_pad_oen_o));
-
-   // /////////////////////////////////////////////////////////////////////////
-   // GPIOs
-
-   wire [31:0] gpio_readback;
-   
-   gpio_atr #(.BASE(SR_GPIO), .WIDTH(32)) 
-   gpio_atr(.clk(wb_clk),.reset(wb_rst),
-	    .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-	    .rx(run_rx0 | run_rx1), .tx(run_tx),
-	    .gpio({io_tx,io_rx}), .gpio_readback(gpio_readback) );
-
-   ////////////////////////////////////////////////////////////////////////////
-   // FIFO to WB slave for async messages - Slave #5
-
-   //signals between fifo and buffer module
-   wire [35:0] _tx_err_data;
-   wire _tx_err_src_rdy, _tx_err_dst_rdy;
-
-   fifo_cascade #(.WIDTH(36), .SIZE(9/*512 lines plenty for short pkts*/)) err_fifo(
-        .clk(wb_clk), .reset(wb_rst), .clear(wb_rst),
-        .datain(tx_err_data),   .src_rdy_i(tx_err_src_rdy),   .dst_rdy_o(tx_err_dst_rdy),
-        .dataout(_tx_err_data), .src_rdy_o(_tx_err_src_rdy),  .dst_rdy_i(_tx_err_dst_rdy)
-   );
-
-   wire [31:0] err_status, err_data32;
-   //the buffer is 32 bits, but the data is 16, so mux based on the addr bit
-   assign s5_dat_miso = (s5_adr[1] == 1'b0)? err_data32[15:0] : err_data32[31:16];
-
-   buffer_int2 #(.BASE(SR_ERR_CTRL), .BUF_SIZE(5)) fifo_to_wb(
-        .clk(wb_clk), .rst(wb_rst),
-        .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
-        .status(err_status),
-        // Wishbone interface to RAM
-        .wb_clk_i(wb_clk), .wb_rst_i(wb_rst),
-        .wb_we_i(s5_we),   .wb_stb_i(s5_stb),
-        .wb_adr_i({5'b0,s5_adr}), .wb_dat_i({16'b0, s5_dat_mosi}),
-        .wb_dat_o(err_data32), .wb_ack_o(s5_ack),
-        // Write FIFO Interface
-        .wr_data_i(_tx_err_data), .wr_ready_i(_tx_err_src_rdy), .wr_ready_o(_tx_err_dst_rdy),
-        // Read FIFO Interface
-        .rd_data_o(), .rd_ready_o(), .rd_ready_i(1'b0)
-    );
-
-   ////////////////////////////////////////////////////////////////////////////
-   // Interrupts
-
-   always @(posedge wb_clk)
-     proc_int <= (|err_status[1:0]);
-
-   // /////////////////////////////////////////////////////////////////////////
-   // Settings Bus -- Slave #8 + 9
-
-   // only have 64 regs, 32 bits each with current setup...
-   settings_bus_16LE #(.AWIDTH(11),.RWIDTH(8)) settings_bus_16LE
-     (.wb_clk(wb_clk),.wb_rst(wb_rst),.wb_adr_i(s8_adr),.wb_dat_i(s8_dat_mosi),
-      .wb_stb_i(s8_stb),.wb_we_i(s8_we),.wb_ack_o(s8_ack),
-      .strobe(set_stb),.addr(set_addr),.data(set_data) );
-
-   user_settings #(.BASE(SR_USER_REGS)) user_settings
-     (.clk(wb_clk),.rst(wb_rst),.set_stb(set_stb),
-      .set_addr(set_addr),.set_data(set_data),
-      .set_addr_user(set_addr_user),.set_data_user(set_data_user),
-      .set_stb_user(set_stb_user) );
-
-   // /////////////////////////////////////////////////////////////////////////
-   // Readback mux 32 -- Slave #7
-
-   //compatibility number -> increment when the fpga has been sufficiently altered
-   localparam compat_num = {16'd10, 16'd2}; //major, minor
-
-   wire [31:0] reg_test32;
-
-   //this setting reg is persistent across resets, to check for fpga loaded
-   setting_reg #(.my_addr(SR_REG_TEST32)) sr_reg_test32
-     (.clk(wb_clk),.rst(/*wb_rst*/1'b0),.strobe(set_stb),.addr(set_addr),
-      .in(set_data),.out(reg_test32),.changed());
-
-   wb_readback_mux_16LE readback_mux_32
-     (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s7_stb),
-      .wb_adr_i({5'b0,s7_adr}), .wb_dat_o(s7_dat_miso), .wb_ack_o(s7_ack),
-
-      .word00(vita_time[63:32]),        .word01(vita_time[31:0]),
-      .word02(vita_time_pps[63:32]),    .word03(vita_time_pps[31:0]),
-      .word04(reg_test32),              .word05(err_status),
-      .word06(compat_num),              .word07(gpio_readback),
-      .word08(32'b0),                   .word09(32'b0),
-      .word10(32'b0),                   .word11(32'b0),
-      .word12(32'b0),                   .word13(32'b0),
-      .word14(32'b0),                   .word15(32'b0)
-      );
-
-   // /////////////////////////////////////////////////////////////////////////
-   // VITA Timing
-
-   time_64bit #(.BASE(SR_TIME64)) time_64bit
-     (.clk(wb_clk), .rst(wb_rst), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
-      .pps(pps_in), .vita_time(vita_time), .vita_time_pps(vita_time_pps), .pps_int(pps_int),
-      .exp_time_in(0));
-   
-   // /////////////////////////////////////////////////////////////////////////////////////
-   // Debug circuitry
-
-   assign debug_clk = 2'b00; //{ EM_CLK, clk_fpga };
-   assign debug = 0;
-   
-endmodule // u1e_core