diff options
| -rw-r--r-- | fpga/usrp2/gpmc/Makefile.srcs | 3 | ||||
| -rw-r--r-- | fpga/usrp2/gpmc/cross_clock_reader.v | 8 | ||||
| -rw-r--r-- | fpga/usrp2/gpmc/fifo_to_gpmc.v | 9 | ||||
| -rw-r--r-- | fpga/usrp2/gpmc/gpmc.v | 156 | ||||
| -rw-r--r-- | fpga/usrp2/gpmc/gpmc_to_fifo.v | 45 | ||||
| -rw-r--r-- | fpga/usrp2/gpmc/gpmc_wb.v | 79 | ||||
| -rw-r--r-- | fpga/usrp2/top/E1x0/E1x0.ucf (renamed from fpga/usrp2/top/E1x0/u1e.ucf) | 0 | ||||
| -rw-r--r-- | fpga/usrp2/top/E1x0/E1x0.v (renamed from fpga/usrp2/top/E1x0/u1e.v) | 105 | ||||
| -rw-r--r-- | fpga/usrp2/top/E1x0/Makefile.E100 | 8 | ||||
| -rw-r--r-- | fpga/usrp2/top/E1x0/Makefile.E110 | 8 | ||||
| -rwxr-xr-x | fpga/usrp2/top/E1x0/core_compile | 2 | ||||
| -rw-r--r-- | fpga/usrp2/top/E1x0/timing.ucf | 26 | ||||
| -rw-r--r-- | fpga/usrp2/top/E1x0/u1e_core.v | 494 |
13 files changed, 219 insertions, 724 deletions
diff --git a/fpga/usrp2/gpmc/Makefile.srcs b/fpga/usrp2/gpmc/Makefile.srcs index 4c6a1b4a2..39b37db58 100644 --- a/fpga/usrp2/gpmc/Makefile.srcs +++ b/fpga/usrp2/gpmc/Makefile.srcs @@ -1,5 +1,5 @@ # -# Copyright 2010-2011 Ettus Research LLC +# Copyright 2010-2012 Ettus Research LLC # ################################################## @@ -10,5 +10,4 @@ cross_clock_reader.v \ fifo_to_gpmc.v \ gpmc.v \ gpmc_to_fifo.v \ -gpmc_wb.v \ )) diff --git a/fpga/usrp2/gpmc/cross_clock_reader.v b/fpga/usrp2/gpmc/cross_clock_reader.v index a8366badc..b4cdb79c5 100644 --- a/fpga/usrp2/gpmc/cross_clock_reader.v +++ b/fpga/usrp2/gpmc/cross_clock_reader.v @@ -27,18 +27,20 @@ module cross_clock_reader ); reg [WIDTH-1:0] shadow0, shadow1; + reg [2:0] count; always @(posedge clk) begin if (rst) begin out <= DEFAULT; shadow0 <= DEFAULT; shadow1 <= DEFAULT; + count <= 0; end - else if (shadow0 == shadow1) begin - out <= shadow1; - end + else if (shadow0 == shadow1) count <= count + 1; + else count <= 0; shadow0 <= in; shadow1 <= shadow0; + if (count == 3'b111) out <= shadow1; end endmodule //cross_clock_reader diff --git a/fpga/usrp2/gpmc/fifo_to_gpmc.v b/fpga/usrp2/gpmc/fifo_to_gpmc.v index 42c71d2d6..27252b970 100644 --- a/fpga/usrp2/gpmc/fifo_to_gpmc.v +++ b/fpga/usrp2/gpmc/fifo_to_gpmc.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -39,7 +39,7 @@ //////////////////////////////////////////////////////////////////////// module fifo_to_gpmc - #(parameter PTR_WIDTH = 2, parameter ADDR_WIDTH = 10) + #(parameter PTR_WIDTH = 2, parameter ADDR_WIDTH = 10, parameter LAST_ADDR = 10'h3ff) (input clk, input reset, input clear, input arst, input [17:0] data_i, input src_rdy_i, output dst_rdy_o, output [15:0] EM_D, input [ADDR_WIDTH:1] EM_A, input EM_CLK, input EM_OE, @@ -82,14 +82,15 @@ module fifo_to_gpmc end GPMC_STATE_EMPTY: begin - if (EM_A == 10'h3ff) begin + if (EM_A == LAST_ADDR) begin gpmc_state <= GPMC_STATE_START; gpmc_ptr <= next_gpmc_ptr; + addr <= 0; end end endcase //gpmc_state - end //EM_WE + end //EM_OE end //always //------------------------------------------------------------------ diff --git a/fpga/usrp2/gpmc/gpmc.v b/fpga/usrp2/gpmc/gpmc.v index a5d4db466..2ba69d184 100644 --- a/fpga/usrp2/gpmc/gpmc.v +++ b/fpga/usrp2/gpmc/gpmc.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -18,7 +18,7 @@ ////////////////////////////////////////////////////////////////////////////////// module gpmc - #(parameter TXFIFOSIZE = 11, + #(parameter TXFIFOSIZE = 11, parameter RXFIFOSIZE = 11, parameter ADDR_WIDTH = 10, parameter BUSDEBUG = 1) @@ -26,57 +26,51 @@ module gpmc input arst, input EM_CLK, inout [15:0] EM_D, input [ADDR_WIDTH:1] EM_A, input [1:0] EM_NBE, input EM_WAIT0, input EM_NCS4, input EM_NCS6, input EM_NWE, input EM_NOE, - + // GPIOs for FIFO signalling - output rx_have_data, output tx_have_space, - - // Wishbone signals - input wb_clk, input wb_rst, - output [ADDR_WIDTH:0] wb_adr_o, output [15:0] wb_dat_mosi, input [15:0] wb_dat_miso, - output [1:0] wb_sel_o, output wb_cyc_o, output wb_stb_o, output wb_we_o, input wb_ack_i, - + output rx_have_data, output tx_have_space, output resp_have_data, + // FIFO interface - input fifo_clk, input fifo_rst, input clear_tx, input clear_rx, - output [35:0] tx_data_o, output tx_src_rdy_o, input tx_dst_rdy_i, - input [35:0] rx_data_i, input rx_src_rdy_i, output rx_dst_rdy_o, + input fifo_clk, input fifo_rst, + output [35:0] tx_data, output tx_src_rdy, input tx_dst_rdy, + input [35:0] rx_data, input rx_src_rdy, output rx_dst_rdy, + output [35:0] ctrl_data, output ctrl_src_rdy, input ctrl_dst_rdy, + input [35:0] resp_data, input resp_src_rdy, output resp_dst_rdy, - output tx_underrun, output rx_overrun, - input [7:0] test_rate, input [3:0] test_ctrl, output [31:0] debug ); - wire EM_output_enable = (~EM_NOE & (~EM_NCS4 | ~EM_NCS6)); - wire [15:0] EM_D_fifo; - wire [15:0] EM_D_wb; + wire EM_output_enable = (~EM_NOE & (~EM_NCS4 | ~EM_NCS6)); + wire [15:0] EM_D_data; + wire [15:0] EM_D_ctrl; - assign EM_D = ~EM_output_enable ? 16'bz : ~EM_NCS4 ? EM_D_fifo : EM_D_wb; + assign EM_D = ~EM_output_enable ? 16'bz : ~EM_NCS4 ? EM_D_data : EM_D_ctrl; // CS4 is RAM_2PORT for DATA PATH (high-speed data) // Writes go into one RAM, reads come from the other - // CS6 is for CONTROL PATH (wishbone) + // CS6 is for CONTROL PATH (slow) // //////////////////////////////////////////// // TX Data Path wire [17:0] tx18_data; wire tx18_src_rdy, tx18_dst_rdy; - wire [35:0] tx_data, txb_data; - wire tx_src_rdy, tx_dst_rdy; + wire [35:0] txb_data; wire txb_src_rdy, txb_dst_rdy; gpmc_to_fifo #(.ADDR_WIDTH(ADDR_WIDTH)) gpmc_to_fifo (.EM_D(EM_D), .EM_A(EM_A), .EM_CLK(EM_CLK), .EM_WE(~EM_NCS4 & ~EM_NWE), - .clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), .arst(fifo_rst | clear_tx | arst), + .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .arst(fifo_rst | arst), .data_o(tx18_data), .src_rdy_o(tx18_src_rdy), .dst_rdy_i(tx18_dst_rdy), .have_space(tx_have_space)); fifo19_to_fifo36 #(.LE(1)) f19_to_f36 // Little endian because ARM is LE - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .f19_datain({1'b0,tx18_data}), .f19_src_rdy_i(tx18_src_rdy), .f19_dst_rdy_o(tx18_dst_rdy), .f36_dataout(txb_data), .f36_src_rdy_o(txb_src_rdy), .f36_dst_rdy_i(txb_dst_rdy)); fifo_cascade #(.WIDTH(36), .SIZE(TXFIFOSIZE)) tx_buffering( - .clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .datain(txb_data), .src_rdy_i(txb_src_rdy), .dst_rdy_o(txb_dst_rdy), .dataout(tx_data), .src_rdy_o(tx_src_rdy), .dst_rdy_i(tx_dst_rdy) ); @@ -86,74 +80,88 @@ module gpmc wire [17:0] rx18_data; wire rx18_src_rdy, rx18_dst_rdy; - wire [35:0] rx_data, rxb_data; - wire rx_src_rdy, rx_dst_rdy; + wire [35:0] rxb_data; wire rxb_src_rdy, rxb_dst_rdy; wire dummy; fifo_cascade #(.WIDTH(36), .SIZE(RXFIFOSIZE)) rx_buffering( - .clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .datain(rx_data), .src_rdy_i(rx_src_rdy), .dst_rdy_o(rx_dst_rdy), .dataout(rxb_data), .src_rdy_o(rxb_src_rdy), .dst_rdy_i(rxb_dst_rdy) ); fifo36_to_fifo19 #(.LE(1)) f36_to_f19 // Little endian because ARM is LE - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .f36_datain(rxb_data), .f36_src_rdy_i(rxb_src_rdy), .f36_dst_rdy_o(rxb_dst_rdy), .f19_dataout({dummy,rx18_data}), .f19_src_rdy_o(rx18_src_rdy), .f19_dst_rdy_i(rx18_dst_rdy) ); - fifo_to_gpmc #(.ADDR_WIDTH(ADDR_WIDTH)) fifo_to_gpmc - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), .arst(fifo_rst | clear_rx | arst), + fifo_to_gpmc #(.ADDR_WIDTH(ADDR_WIDTH), .LAST_ADDR(10'h3ff)) fifo_to_gpmc + (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .arst(fifo_rst | arst), .data_i(rx18_data), .src_rdy_i(rx18_src_rdy), .dst_rdy_o(rx18_dst_rdy), - .EM_D(EM_D_fifo), .EM_A(EM_A), .EM_CLK(EM_CLK), .EM_OE(~EM_NCS4 & ~EM_NOE), + .EM_D(EM_D_data), .EM_A(EM_A), .EM_CLK(EM_CLK), .EM_OE(~EM_NCS4 & ~EM_NOE), .data_available(rx_have_data)); // //////////////////////////////////////////// // Control path on CS6 - - gpmc_wb gpmc_wb - (.EM_CLK(EM_CLK), .EM_D_in(EM_D), .EM_D_out(EM_D_wb), .EM_A(EM_A), .EM_NBE(EM_NBE), - .EM_WE(~EM_NCS6 & ~EM_NWE), .EM_OE(~EM_NCS6 & ~EM_NOE), - .wb_clk(wb_clk), .wb_rst(wb_rst), - .wb_adr_o(wb_adr_o), .wb_dat_mosi(wb_dat_mosi), .wb_dat_miso(wb_dat_miso), - .wb_sel_o(wb_sel_o), .wb_cyc_o(wb_cyc_o), .wb_stb_o(wb_stb_o), .wb_we_o(wb_we_o), - .wb_ack_i(wb_ack_i) ); + + // //////////////////////////////////////////////////////////////////// + // CTRL TX Data Path + + wire [17:0] ctrl18_data; + wire ctrl18_src_rdy, ctrl18_dst_rdy; + wire [35:0] ctrlb_data; + wire ctrlb_src_rdy, ctrlb_dst_rdy; + + gpmc_to_fifo #(.PTR_WIDTH(5), .ADDR_WIDTH(5)) ctrl_gpmc_to_fifo + (.EM_D(EM_D), .EM_A(EM_A[5:1]), .EM_CLK(EM_CLK), .EM_WE(~EM_NCS6 & ~EM_NWE & (EM_A[ADDR_WIDTH:6] == 0)), + .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .arst(fifo_rst | arst), + .data_o(ctrl18_data), .src_rdy_o(ctrl18_src_rdy), .dst_rdy_i(ctrl18_dst_rdy), + .have_space(/*always*/)); + + fifo19_to_fifo36 #(.LE(1)) ctrl_f19_to_f36 // Little endian because ARM is LE + (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), + .f19_datain({1'b0,ctrl18_data}), .f19_src_rdy_i(ctrl18_src_rdy), .f19_dst_rdy_o(ctrl18_dst_rdy), + .f36_dataout(ctrlb_data), .f36_src_rdy_o(ctrlb_src_rdy), .f36_dst_rdy_i(ctrlb_dst_rdy)); + + fifo_cascade #(.WIDTH(36), .SIZE(9)) ctrl_buffering( + .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), + .datain(ctrlb_data), .src_rdy_i(ctrlb_src_rdy), .dst_rdy_o(ctrlb_dst_rdy), + .dataout(ctrl_data), .src_rdy_o(ctrl_src_rdy), .dst_rdy_i(ctrl_dst_rdy) + ); // //////////////////////////////////////////// - // Test support, traffic generator, loopback, etc. - - // RX side muxes test data into the same stream - wire [35:0] loopbackrx_data, testrx_data; - wire [35:0] loopbacktx_data, testtx_data; - wire loopbackrx_src_rdy, loopbackrx_dst_rdy; - wire loopbacktx_src_rdy, loopbacktx_dst_rdy; - wire sel_testtx = test_ctrl[0]; - - fifo36_mux rx_test_mux_lvl_2 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), - .data0_i(loopbackrx_data), .src0_rdy_i(loopbackrx_src_rdy), .dst0_rdy_o(loopbackrx_dst_rdy), - .data1_i(rx_data_i), .src1_rdy_i(rx_src_rdy_i), .dst1_rdy_o(rx_dst_rdy_o), - .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy)); - - fifo_short #(.WIDTH(36)) loopback_fifo - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx | clear_rx), - .datain(loopbacktx_data), .src_rdy_i(loopbacktx_src_rdy), .dst_rdy_o(loopbacktx_dst_rdy), - .dataout(loopbackrx_data), .src_rdy_o(loopbackrx_src_rdy), .dst_rdy_i(loopbackrx_dst_rdy)); - - // Crossbar used as a demux for switching TX stream to main DSP or to test logic - crossbar36 tx_crossbar_lvl_1 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), - .cross(sel_testtx), - .data0_i(tx_data), .src0_rdy_i(tx_src_rdy), .dst0_rdy_o(tx_dst_rdy), - .data1_i(tx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input - .data0_o(tx_data_o), .src0_rdy_o(tx_src_rdy_o), .dst0_rdy_i(tx_dst_rdy_i), - .data1_o(loopbacktx_data), .src1_rdy_o(loopbacktx_src_rdy), .dst1_rdy_i(loopbacktx_dst_rdy) ); - - assign debug = { - EM_D, //16 + // CTRL RX Data Path + + wire [17:0] resp18_data; + wire resp18_src_rdy, resp18_dst_rdy; + wire [35:0] respb_data; + wire respb_src_rdy, respb_dst_rdy; + wire resp_dummy; + + fifo_cascade #(.WIDTH(36), .SIZE(9)) resp_buffering( + .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), + .datain(resp_data), .src_rdy_i(resp_src_rdy), .dst_rdy_o(resp_dst_rdy), + .dataout(respb_data), .src_rdy_o(respb_src_rdy), .dst_rdy_i(respb_dst_rdy) + ); + + fifo36_to_fifo19 #(.LE(1)) resp_f36_to_f19 // Little endian because ARM is LE + (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), + .f36_datain(respb_data), .f36_src_rdy_i(respb_src_rdy), .f36_dst_rdy_o(respb_dst_rdy), + .f19_dataout({resp_dummy,resp18_data}), .f19_src_rdy_o(resp18_src_rdy), .f19_dst_rdy_i(resp18_dst_rdy) ); + + fifo_to_gpmc #(.ADDR_WIDTH(ADDR_WIDTH), .LAST_ADDR(10'h00f)) resp_fifo_to_gpmc + (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .arst(fifo_rst | arst), + .data_i(resp18_data), .src_rdy_i(resp18_src_rdy), .dst_rdy_o(resp18_dst_rdy), + .EM_D(EM_D_ctrl), .EM_A(EM_A), .EM_CLK(EM_CLK), .EM_OE(~EM_NCS6 & ~EM_NOE), + .data_available(resp_have_data)); + + assign debug = { + EM_D, + //resp18_data[15:0], //16 EM_A, //10 - EM_CLK, EM_NCS4, EM_NWE, EM_NOE, //4 - EM_NCS6, wb_ack_i - }; + //resp18_data[17:16], resp18_src_rdy, resp18_dst_rdy, //4 + EM_NCS4, EM_NCS6, EM_NWE, EM_NOE, //4 + EM_CLK, resp_have_data //2 + }; endmodule // gpmc diff --git a/fpga/usrp2/gpmc/gpmc_to_fifo.v b/fpga/usrp2/gpmc/gpmc_to_fifo.v index cfc5aaa8b..680095620 100644 --- a/fpga/usrp2/gpmc/gpmc_to_fifo.v +++ b/fpga/usrp2/gpmc/gpmc_to_fifo.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -22,7 +22,7 @@ // The GPMC is asynchronously alerted when a BRAM page is available. // // EM_CLK: -// A GPMC read transaction consists of one EM_CLK cycle (idle low). +// A GPMC write transaction consists of one EM_CLK cycle (idle low). // // EM_WE: // Write enable is actually the combination of ~NWE & ~NCS. @@ -36,7 +36,7 @@ //////////////////////////////////////////////////////////////////////// module gpmc_to_fifo - #(parameter PTR_WIDTH = 2, parameter ADDR_WIDTH = 10) + #(parameter PTR_WIDTH = 2, parameter ADDR_WIDTH = 10, parameter XFER_OFFSET = 2) (input [15:0] EM_D, input [ADDR_WIDTH:1] EM_A, input EM_CLK, input EM_WE, input clk, input reset, input clear, input arst, output [17:0] data_o, output src_rdy_o, input dst_rdy_i, @@ -45,17 +45,20 @@ module gpmc_to_fifo //states for the GPMC side of things wire [17:0] data_i; reg gpmc_state; - reg [ADDR_WIDTH:1] last_addr; + reg [15:0] vita_len; + reg [ADDR_WIDTH:1] addr; + wire [ADDR_WIDTH:1] last_addr = {vita_len[ADDR_WIDTH-2:0], 1'b0} - 1'b1 + XFER_OFFSET; reg [PTR_WIDTH:0] gpmc_ptr, next_gpmc_ptr; localparam GPMC_STATE_START = 0; localparam GPMC_STATE_FILL = 1; //states for the FIFO side of things - reg fifo_state; + reg [1:0] fifo_state; reg [ADDR_WIDTH-1:0] counter; reg [PTR_WIDTH:0] fifo_ptr; localparam FIFO_STATE_CLAIM = 0; localparam FIFO_STATE_EMPTY = 1; + localparam FIFO_STATE_PRE = 2; //------------------------------------------------------------------ // State machine to control the data from GPMC to BRAM @@ -65,14 +68,16 @@ module gpmc_to_fifo gpmc_state <= GPMC_STATE_START; gpmc_ptr <= 0; next_gpmc_ptr <= 0; + addr <= 0; end else if (EM_WE) begin + addr <= EM_A + 1; case(gpmc_state) GPMC_STATE_START: begin - if (EM_A == 2) begin + if (EM_A == XFER_OFFSET) begin gpmc_state <= GPMC_STATE_FILL; - last_addr <= {EM_D[ADDR_WIDTH-2:0], 1'b0} - 1'b1 + 2; + vita_len <= EM_D; next_gpmc_ptr <= gpmc_ptr + 1; end end @@ -81,6 +86,7 @@ module gpmc_to_fifo if (data_i[17]) begin gpmc_state <= GPMC_STATE_START; gpmc_ptr <= next_gpmc_ptr; + addr <= 0; end end @@ -105,6 +111,7 @@ module gpmc_to_fifo cross_clock_reader #(.WIDTH(PTR_WIDTH+1)) read_next_gpmc_ptr (.clk(clk), .rst(reset | clear), .in(next_gpmc_ptr), .out(safe_next_gpmc_ptr)); + wire [PTR_WIDTH:0] fifo_ptr_next = fifo_ptr + 1; always @(posedge clk) if (reset | clear) have_space <= 0; else have_space <= (fifo_ptr ^ (1 << PTR_WIDTH)) != safe_next_gpmc_ptr; @@ -116,22 +123,28 @@ module gpmc_to_fifo if (reset | clear) begin fifo_state <= FIFO_STATE_CLAIM; fifo_ptr <= 0; - counter <= 2; + counter <= XFER_OFFSET; end else begin case(fifo_state) FIFO_STATE_CLAIM: begin - if (bram_available_to_empty) fifo_state <= FIFO_STATE_EMPTY; - counter <= 2; + if (bram_available_to_empty && data_o[16]) fifo_state <= FIFO_STATE_PRE; + counter <= XFER_OFFSET; + end + + FIFO_STATE_PRE: begin + fifo_state <= FIFO_STATE_EMPTY; + counter <= counter + 1; end FIFO_STATE_EMPTY: begin if (src_rdy_o && dst_rdy_i && data_o[17]) begin fifo_state <= FIFO_STATE_CLAIM; fifo_ptr <= fifo_ptr + 1; + counter <= XFER_OFFSET; end - if (src_rdy_o && dst_rdy_i) begin + else if (src_rdy_o && dst_rdy_i) begin counter <= counter + 1; end end @@ -140,18 +153,20 @@ module gpmc_to_fifo end end //always + wire enable = (fifo_state != FIFO_STATE_EMPTY) || dst_rdy_i; + assign src_rdy_o = fifo_state == FIFO_STATE_EMPTY; //assign data and frame bits to bram input assign data_i[15:0] = EM_D; - assign data_i[16] = (gpmc_state == GPMC_STATE_START); - assign data_i[17] = (EM_A == last_addr); + assign data_i[16] = (addr == XFER_OFFSET); + assign data_i[17] = (addr == last_addr); //instantiate dual ported bram for async read + write ram_2port #(.DWIDTH(18),.AWIDTH(PTR_WIDTH + ADDR_WIDTH)) async_fifo_bram (.clka(~EM_CLK),.ena(1'b1),.wea(EM_WE), - .addra({gpmc_ptr[PTR_WIDTH-1:0], EM_A}),.dia(data_i),.doa(), - .clkb(~clk),.enb(1'b1),.web(1'b0), + .addra({gpmc_ptr[PTR_WIDTH-1:0], addr}),.dia(data_i),.doa(), + .clkb(clk),.enb(enable),.web(1'b0), .addrb({fifo_ptr[PTR_WIDTH-1:0], counter}),.dib(18'h3ffff),.dob(data_o)); endmodule // gpmc_to_fifo diff --git a/fpga/usrp2/gpmc/gpmc_wb.v b/fpga/usrp2/gpmc/gpmc_wb.v deleted file mode 100644 index 4d368ca94..000000000 --- a/fpga/usrp2/gpmc/gpmc_wb.v +++ /dev/null @@ -1,79 +0,0 @@ -// -// Copyright 2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - - - -module gpmc_wb - (input EM_CLK, input [15:0] EM_D_in, output [15:0] EM_D_out, input [10:1] EM_A, input [1:0] EM_NBE, - input EM_WE, input EM_OE, - - input wb_clk, input wb_rst, - output reg [10:0] wb_adr_o, output reg [15:0] wb_dat_mosi, input [15:0] wb_dat_miso, - output reg [1:0] wb_sel_o, output wb_cyc_o, output reg wb_stb_o, output reg wb_we_o, input wb_ack_i); - - // //////////////////////////////////////////// - // Control Path, Wishbone bus bridge (wb master) - reg [1:0] we_del, oe_del; - - // Synchronize the async control signals - always @(posedge wb_clk) - if (wb_rst) begin - we_del <= 2'b0; - oe_del <= 2'b0; - end - else begin - we_del <= { we_del[0], EM_WE }; - oe_del <= { oe_del[0], EM_OE }; - end - - wire writing = we_del == 2'b01; - wire reading = oe_del == 2'b01; - - always @(posedge wb_clk) - if(writing || reading) - wb_adr_o <= { EM_A, 1'b0 }; - - always @(posedge wb_clk) - if(writing) - begin - wb_dat_mosi <= EM_D_in; - wb_sel_o <= ~EM_NBE; - end - - reg [15:0] EM_D_hold; - - always @(posedge wb_clk) - if(wb_ack_i) - EM_D_hold <= wb_dat_miso; - - assign EM_D_out = wb_ack_i ? wb_dat_miso : EM_D_hold; - - assign wb_cyc_o = wb_stb_o; - - always @(posedge wb_clk) - if(writing) - wb_we_o <= 1; - else if(wb_ack_i) // Turn off we when done. Could also use we_del[0], others... - wb_we_o <= 0; - - always @(posedge wb_clk) - if(writing || reading) - wb_stb_o <= 1; - else if(wb_ack_i) - wb_stb_o <= 0; - -endmodule // gpmc_wb diff --git a/fpga/usrp2/top/E1x0/u1e.ucf b/fpga/usrp2/top/E1x0/E1x0.ucf index 278fc289a..278fc289a 100644 --- a/fpga/usrp2/top/E1x0/u1e.ucf +++ b/fpga/usrp2/top/E1x0/E1x0.ucf diff --git a/fpga/usrp2/top/E1x0/u1e.v b/fpga/usrp2/top/E1x0/E1x0.v index 903ef7a6f..e7b0a4e00 100644 --- a/fpga/usrp2/top/E1x0/u1e.v +++ b/fpga/usrp2/top/E1x0/E1x0.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -18,7 +18,7 @@ `timescale 1ns / 1ps ////////////////////////////////////////////////////////////////////////////////// -module u1e +module E1x0 (input CLK_FPGA_P, input CLK_FPGA_N, // Diff output [3:0] debug_led, output [31:0] debug, output [1:0] debug_clk, input debug_pb, output FPGA_TXD, input FPGA_RXD, @@ -52,13 +52,23 @@ module u1e input PPS_IN ); + assign FPGA_TXD = 0; //dont care + // ///////////////////////////////////////////////////////////////////////// // Clocking - wire clk_fpga; + wire clk_fpga; + wire reset; + + reg async_reset; + always @(negedge EM_CLK) begin + async_reset <= ~EM_NCS6 && ~EM_NWE && (EM_A[9:2] == 8'hff) && EM_D[0]; + end IBUFGDS #(.IOSTANDARD("LVDS_33"), .DIFF_TERM("TRUE")) clk_fpga_pin (.O(clk_fpga),.I(CLK_FPGA_P),.IB(CLK_FPGA_N)); + reset_sync reset_sync(.clk(clk_fpga), .reset_in(async_reset), .reset_out(reset)); + // ///////////////////////////////////////////////////////////////////////// // UART level conversion assign fpga_txd1 = overo_txd1; @@ -73,12 +83,12 @@ module u1e assign miso = (~db_sen_tx & db_miso_tx) | (~db_sen_rx & db_miso_rx) | (~sen_codec & miso_codec) | (~cgen_sen_b & cgen_miso); - //assign the aux spi to the cgen (bypasses wishbone) + //assign the aux spi to the cgen (bypasses control fifo) assign cgen_sclk = overo_gpio65; assign cgen_sen_b = overo_gpio128; assign cgen_mosi = overo_gpio145; - wire proc_int; //re-purpose gpio for interrupt when we are not using aux spi - assign overo_gpio147 = (cgen_sen_b == 1'b0)? cgen_miso : proc_int; + wire has_resp; //re-purpose gpio for interrupt when we are not using aux spi + assign overo_gpio147 = (cgen_sen_b == 1'b0)? cgen_miso : has_resp; wire _cgen_sen_b; //assign cgen_sen_b = _cgen_sen_b; //replaced by aux spi @@ -121,29 +131,66 @@ module u1e .D1(1'b1), // 1-bit data input (associated with C1) .R(1'b0), // 1-bit reset input .S(1'b0)); // 1-bit set input - + // ///////////////////////////////////////////////////////////////////////// - // Main U1E Core - u1e_core u1e_core(.clk_fpga(clk_fpga), .rst_fpga(~debug_pb), - .debug_led(debug_led), .debug(debug), .debug_clk(debug_clk), - .debug_txd(FPGA_TXD), .debug_rxd(FPGA_RXD), - .EM_CLK(EM_CLK), .EM_D(EM_D), .EM_A(EM_A), .EM_NBE(EM_NBE), - .EM_WAIT0(EM_WAIT0), .EM_NCS4(EM_NCS4), .EM_NCS5(EM_NCS5), - .EM_NCS6(EM_NCS6), .EM_NWE(EM_NWE), .EM_NOE(EM_NOE), - .db_sda(db_sda), .db_scl(db_scl), - .sclk(sclk), .sen({_cgen_sen_b,sen_codec,db_sen_tx,db_sen_rx}), .mosi(mosi), .miso(miso), - .cgen_st_status(cgen_st_status), .cgen_st_ld(cgen_st_ld),.cgen_st_refmon(cgen_st_refmon), - .cgen_sync_b(cgen_sync_b), .cgen_ref_sel(cgen_ref_sel), - .tx_have_space(overo_gpio144), - .rx_have_data(overo_gpio146), - .io_tx(io_tx), .io_rx(io_rx), - .tx_i(tx_i), .tx_q(tx_q), - .rx_i(DA), .rx_q(DB), - .pps_in(PPS_IN), .proc_int(proc_int) ); + // Main Core + wire [35:0] rx_data, tx_data, ctrl_data, resp_data; + wire rx_src_rdy, rx_dst_rdy, tx_src_rdy, tx_dst_rdy, resp_src_rdy, resp_dst_rdy, ctrl_src_rdy, ctrl_dst_rdy; + wire dsp_rx_run, dsp_tx_run; + wire [7:0] sen8; + assign {_cgen_sen_b,sen_codec,db_sen_tx,db_sen_rx} = sen8[3:0]; + wire [31:0] core_debug; + + assign debug_led = ~{PPS_IN, dsp_tx_run, dsp_rx_run, cgen_st_ld}; + wire cgen_sync; + assign { cgen_sync_b, cgen_ref_sel } = {~cgen_sync, 1'b1}; + + u1plus_core #( + .NUM_RX_DSPS(2), + .DSP_RX_XTRA_FIFOSIZE(10), + .DSP_TX_XTRA_FIFOSIZE(10), + .USE_PACKET_PADDER(0) + ) core( + .clk(clk_fpga), .reset(reset), + .debug(core_debug), .debug_clk(debug_clk), + + .rx_data(rx_data), .rx_src_rdy(rx_src_rdy), .rx_dst_rdy(rx_dst_rdy), + .tx_data(tx_data), .tx_src_rdy(tx_src_rdy), .tx_dst_rdy(tx_dst_rdy), + .ctrl_data(ctrl_data), .ctrl_src_rdy(ctrl_src_rdy), .ctrl_dst_rdy(ctrl_dst_rdy), + .resp_data(resp_data), .resp_src_rdy(resp_src_rdy), .resp_dst_rdy(resp_dst_rdy), + + .dsp_rx_run(dsp_rx_run), .dsp_tx_run(dsp_tx_run), + .clock_sync(cgen_sync), + + .db_sda(db_sda), .db_scl(db_scl), + .sclk(sclk), .sen(sen8), .mosi(mosi), .miso(miso), + .io_tx(io_tx), .io_rx(io_rx), + .tx_i(tx_i), .tx_q(tx_q), + .rx_i(DA), .rx_q(DB), + .pps_in(PPS_IN) ); // ///////////////////////////////////////////////////////////////////////// - // Local Debug - // assign debug_clk = {clk_fpga, clk_2x }; - // assign debug = { TXSYNC, TXBLANK, TX }; - -endmodule // u1e + // Interface between GPMC/host + wire [31:0] gpmc_debug; + + gpmc #(.TXFIFOSIZE(13), .RXFIFOSIZE(13)) + gpmc (.arst(async_reset), + .EM_CLK(EM_CLK), .EM_D(EM_D), .EM_A(EM_A), .EM_NBE(EM_NBE), + .EM_WAIT0(EM_WAIT0), .EM_NCS4(EM_NCS4), .EM_NCS6(EM_NCS6), .EM_NWE(EM_NWE), + .EM_NOE(EM_NOE), + + .rx_have_data(overo_gpio146), .tx_have_space(overo_gpio144), + .resp_have_data(has_resp), + + .fifo_clk(clk_fpga), .fifo_rst(reset), + .rx_data(rx_data), .rx_src_rdy(rx_src_rdy), .rx_dst_rdy(rx_dst_rdy), + .tx_data(tx_data), .tx_src_rdy(tx_src_rdy), .tx_dst_rdy(tx_dst_rdy), + .ctrl_data(ctrl_data), .ctrl_src_rdy(ctrl_src_rdy), .ctrl_dst_rdy(ctrl_dst_rdy), + .resp_data(resp_data), .resp_src_rdy(resp_src_rdy), .resp_dst_rdy(resp_dst_rdy), + + .debug(gpmc_debug)); + + //assign debug = gpmc_debug; + assign debug = core_debug; + +endmodule // E1x0 diff --git a/fpga/usrp2/top/E1x0/Makefile.E100 b/fpga/usrp2/top/E1x0/Makefile.E100 index 3ba7e1031..92334d987 100644 --- a/fpga/usrp2/top/E1x0/Makefile.E100 +++ b/fpga/usrp2/top/E1x0/Makefile.E100 @@ -5,7 +5,7 @@ ################################################## # Project Setup ################################################## -TOP_MODULE = u1e +TOP_MODULE = E1x0 BUILD_DIR = $(abspath build$(ISE)-E100) # set me in a custom makefile @@ -48,9 +48,9 @@ simulator "ISE Simulator (VHDL/Verilog)" \ # Sources ################################################## TOP_SRCS = \ -u1e_core.v \ -u1e.v \ -u1e.ucf \ +../B100/u1plus_core.v \ +E1x0.v \ +E1x0.ucf \ timing.ucf SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \ diff --git a/fpga/usrp2/top/E1x0/Makefile.E110 b/fpga/usrp2/top/E1x0/Makefile.E110 index 89e51b523..e5be8d2fa 100644 --- a/fpga/usrp2/top/E1x0/Makefile.E110 +++ b/fpga/usrp2/top/E1x0/Makefile.E110 @@ -5,7 +5,7 @@ ################################################## # Project Setup ################################################## -TOP_MODULE = u1e +TOP_MODULE = E1x0 BUILD_DIR = $(abspath build$(ISE)-E110) # set me in a custom makefile @@ -48,9 +48,9 @@ simulator "ISE Simulator (VHDL/Verilog)" \ # Sources ################################################## TOP_SRCS = \ -u1e_core.v \ -u1e.v \ -u1e.ucf \ +../B100/u1plus_core.v \ +E1x0.v \ +E1x0.ucf \ timing.ucf SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \ diff --git a/fpga/usrp2/top/E1x0/core_compile b/fpga/usrp2/top/E1x0/core_compile index 14e138fa3..dd88094ff 100755 --- a/fpga/usrp2/top/E1x0/core_compile +++ b/fpga/usrp2/top/E1x0/core_compile @@ -1,3 +1,3 @@ -iverilog -Wall -y. -y ../../control_lib/ -y ../../custom/ -y ../../fifo/ -y ../../gpmc/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../../simple_gemac -y $XILINX/verilog/src/unisims u1e_core.v 2>&1 | grep -v timescale | grep -v coregen | grep -v models +iverilog -Wall -y. -y ../../control_lib/ -y ../../custom/ -y ../../fifo/ -y ../../gpmc/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../B100 -y $XILINX/verilog/src/unisims E100.v 2>&1 | grep -v timescale | grep -v coregen | grep -v models diff --git a/fpga/usrp2/top/E1x0/timing.ucf b/fpga/usrp2/top/E1x0/timing.ucf index 47c250c2f..6bd559426 100644 --- a/fpga/usrp2/top/E1x0/timing.ucf +++ b/fpga/usrp2/top/E1x0/timing.ucf @@ -3,25 +3,21 @@ NET "CLK_FPGA_P" TNM_NET = "CLK_FPGA_P"; TIMESPEC "TS_clk_fpga_p" = PERIOD "CLK_FPGA_P" 15625 ps HIGH 50 %; NET "EM_CLK" TNM_NET = "EM_CLK"; -TIMESPEC "TS_em_clk" = PERIOD "EM_CLK" 12048 ps HIGH 50 %; +TIMESPEC "TS_em_clk" = PERIOD "EM_CLK" 18867 ps HIGH 50 %; #constrain GPMC IO -NET "EM_D<*>" MAXDELAY = 5.5 ns; -NET "EM_A<*>" MAXDELAY = 5.5 ns; -NET "EM_NBE<*>" MAXDELAY = 5.5 ns; -NET "EM_NCS4" MAXDELAY = 5.5 ns; -NET "EM_NCS6" MAXDELAY = 5.5 ns; -NET "EM_NWE" MAXDELAY = 5.5 ns; -NET "EM_NOE" MAXDELAY = 5.5 ns; +INST "EM_D<*>" TNM = gpmc_net_out; +INST "EM_D<*>" TNM = gpmc_net; +INST "EM_A<*>" TNM = gpmc_net; +INST "EM_NCS4" TNM = gpmc_net; +INST "EM_NCS6" TNM = gpmc_net; +INST "EM_NWE" TNM = gpmc_net; +INST "EM_NOE" TNM = gpmc_net; + +TIMEGRP "gpmc_net" OFFSET = IN 7 ns VALID 14 ns BEFORE "EM_CLK" FALLING; +TIMEGRP "gpmc_net_out" OFFSET = OUT 14 ns AFTER "EM_CLK" RISING; //2 clock cyc per read #constrain interrupt lines NET "overo_gpio144" MAXDELAY = 5.5 ns; #have space NET "overo_gpio146" MAXDELAY = 5.5 ns; #have data NET "overo_gpio147" MAXDELAY = 5.5 ns; #have msg/aux spi miso - -#NET "adc_a<*>" TNM_NET = ADC_DATA_GRP; -#NET "adc_b<*>" TNM_NET = ADC_DATA_GRP; -#TIMEGRP "ADC_DATA_GRP" OFFSET = IN 1 ns VALID 5 ns BEFORE "clk_fpga_p" RISING; - -#NET "adc_a<*>" OFFSET = IN 1 ns VALID 5 ns BEFORE "clk_fpga_p" RISING; -#NET "adc_b<*>" OFFSET = IN 1 ns VALID 5 ns BEFORE "clk_fpga_p" RISING; diff --git a/fpga/usrp2/top/E1x0/u1e_core.v b/fpga/usrp2/top/E1x0/u1e_core.v deleted file mode 100644 index fef988e62..000000000 --- a/fpga/usrp2/top/E1x0/u1e_core.v +++ /dev/null @@ -1,494 +0,0 @@ -// -// Copyright 2011-2012 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - - - -module u1e_core - (input clk_fpga, input rst_fpga, - output [3:0] debug_led, output [31:0] debug, output [1:0] debug_clk, - output debug_txd, input debug_rxd, - - // GPMC - input EM_CLK, inout [15:0] EM_D, input [10:1] EM_A, input [1:0] EM_NBE, - input EM_WAIT0, input EM_NCS4, input EM_NCS5, input EM_NCS6, - input EM_NWE, input EM_NOE, - - inout db_sda, inout db_scl, - output sclk, output [15:0] sen, output mosi, input miso, - - input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel, - output tx_have_space, output rx_have_data, - inout [15:0] io_tx, inout [15:0] io_rx, - output [13:0] tx_i, output [13:0] tx_q, - input [11:0] rx_i, input [11:0] rx_q, - - input pps_in, output reg proc_int - ); - - localparam TXFIFOSIZE = 13; - localparam RXFIFOSIZE = 13; - - // 64 total regs in address space - localparam SR_RX_CTRL0 = 0; // 9 regs (+0 to +8) - localparam SR_RX_DSP0 = 10; // 4 regs (+0 to +3) - localparam SR_RX_CTRL1 = 16; // 9 regs (+0 to +8) - localparam SR_RX_DSP1 = 26; // 4 regs (+0 to +3) - localparam SR_ERR_CTRL = 30; // 1 reg - localparam SR_TX_CTRL = 32; // 4 regs (+0 to +3) - localparam SR_TX_DSP = 38; // 3 regs (+0 to +2) - - localparam SR_TIME64 = 42; // 6 regs (+0 to +5) - localparam SR_RX_FRONT = 48; // 5 regs (+0 to +4) - localparam SR_TX_FRONT = 54; // 5 regs (+0 to +4) - - localparam SR_REG_TEST32 = 60; // 1 reg - localparam SR_CLEAR_FIFO = 61; // 1 reg - localparam SR_GLOBAL_RESET = 63; // 1 reg - localparam SR_USER_REGS = 64; // 2 regs - - localparam SR_GPIO = 128; // 5 regs - - wire wb_clk = clk_fpga; - wire wb_rst, global_reset; - - wire pps_int; - wire [63:0] vita_time, vita_time_pps; - reg [15:0] reg_cgen_ctrl, reg_test, xfer_rate; - wire [7:0] test_rate; - wire [3:0] test_ctrl; - - wire [7:0] set_addr, set_addr_user; - wire [31:0] set_data, set_data_user; - wire set_stb, set_stb_user; - - wire [31:0] debug_vt; - wire rx_overrun_dsp0, rx_overrun_dsp1, rx_overrun_gpmc, tx_underrun_dsp, tx_underrun_gpmc; - wire rx_overrun = rx_overrun_gpmc | rx_overrun_dsp0 | rx_overrun_dsp1; - wire tx_underrun = tx_underrun_gpmc | tx_underrun_dsp; - - setting_reg #(.my_addr(SR_GLOBAL_RESET), .width(1)) sr_reset - (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(),.changed(global_reset)); - - reset_sync reset_sync(.clk(wb_clk), .reset_in(rst_fpga | global_reset), .reset_out(wb_rst)); - - // ///////////////////////////////////////////////////////////////////////////////////// - // GPMC Slave to Wishbone Master - localparam dw = 16; - localparam aw = 11; - localparam sw = 2; - - wire [dw-1:0] m0_dat_mosi, m0_dat_miso; - wire [aw-1:0] m0_adr; - wire [sw-1:0] m0_sel; - wire m0_cyc, m0_stb, m0_we, m0_ack, m0_err, m0_rty; - - wire [31:0] debug_gpmc; - - wire [35:0] tx_data, rx_data, tx_err_data; - wire tx_src_rdy, tx_dst_rdy, rx_src_rdy, rx_dst_rdy, - tx_err_src_rdy, tx_err_dst_rdy; - - wire clear_fifo; - - setting_reg #(.my_addr(SR_CLEAR_FIFO), .width(1)) sr_clear_fifo - (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(),.changed(clear_fifo)); - - wire run_rx0, run_rx1; - - gpmc #(.TXFIFOSIZE(TXFIFOSIZE), .RXFIFOSIZE(RXFIFOSIZE)) - gpmc (.arst(wb_rst), - .EM_CLK(EM_CLK), .EM_D(EM_D), .EM_A(EM_A), .EM_NBE(EM_NBE), - .EM_WAIT0(EM_WAIT0), .EM_NCS4(EM_NCS4), .EM_NCS6(EM_NCS6), .EM_NWE(EM_NWE), - .EM_NOE(EM_NOE), - - .rx_have_data(rx_have_data), .tx_have_space(tx_have_space), - - .wb_clk(wb_clk), .wb_rst(wb_rst), - .wb_adr_o(m0_adr), .wb_dat_mosi(m0_dat_mosi), .wb_dat_miso(m0_dat_miso), - .wb_sel_o(m0_sel), .wb_cyc_o(m0_cyc), .wb_stb_o(m0_stb), .wb_we_o(m0_we), - .wb_ack_i(m0_ack), - - .fifo_clk(wb_clk), .fifo_rst(wb_rst), .clear_tx(clear_fifo), .clear_rx(clear_fifo), - .tx_data_o(tx_data), .tx_src_rdy_o(tx_src_rdy), .tx_dst_rdy_i(tx_dst_rdy), - .rx_data_i(rx_data), .rx_src_rdy_i(rx_src_rdy), .rx_dst_rdy_o(rx_dst_rdy), - - .tx_underrun(tx_underrun_gpmc), .rx_overrun(rx_overrun_gpmc), - - .test_rate(test_rate), .test_ctrl(test_ctrl), - .debug(debug_gpmc)); - - wire rx_src_rdy_int, rx_dst_rdy_int, tx_src_rdy_int, tx_dst_rdy_int; - - wire [31:0] debug_rx_dsp, vrc_debug, vrf_debug, vr_debug; - - // ///////////////////////////////////////////////////////////////////////// - // RX ADC Frontend, does IQ Balance, DC Offset, muxing - - wire [23:0] rx_fe_i, rx_fe_q; // 24 bits is total overkill here, but it matches u2/u2p - - rx_frontend #(.BASE(SR_RX_FRONT)) rx_frontend - (.clk(wb_clk),.rst(wb_rst), - .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .adc_a({rx_i,4'b00}),.adc_ovf_a(0), - .adc_b({rx_q,4'b00}),.adc_ovf_b(0), - .i_out(rx_fe_i), .q_out(rx_fe_q), .run(run_rx0 | run_rx1), .debug()); - - // ///////////////////////////////////////////////////////////////////////// - // DSP RX 0 - - wire [31:0] sample_rx0; - wire strobe_rx0, clear_rx0; - wire [35:0] vita_rx_data0; - wire vita_rx_src_rdy0, vita_rx_dst_rdy0; - - ddc_chain #(.BASE(SR_RX_DSP0), .DSPNO(0)) ddc_chain0 - (.clk(wb_clk), .rst(wb_rst), .clr(clear_rx0), - .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), - .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q), - .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), - .debug() ); - - vita_rx_chain #(.BASE(SR_RX_CTRL0), .UNIT(0), .FIFOSIZE(10), .PROT_ENG_FLAGS(0), .DSP_NUMBER(0)) vita_rx_chain0 - (.clk(wb_clk),.reset(wb_rst), - .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), - .vita_time(vita_time), .overrun(rx_overrun_dsp0), - .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), .clear_o(clear_rx0), - .rx_data_o(vita_rx_data0), .rx_dst_rdy_i(vita_rx_dst_rdy0), .rx_src_rdy_o(vita_rx_src_rdy0), - .debug() ); - - // ///////////////////////////////////////////////////////////////////////// - // DSP RX 1 - - wire [31:0] sample_rx1; - wire strobe_rx1, clear_rx1; - wire [35:0] vita_rx_data1; - wire vita_rx_src_rdy1, vita_rx_dst_rdy1; - - ddc_chain #(.BASE(SR_RX_DSP1), .DSPNO(1)) ddc_chain1 - (.clk(wb_clk),.rst(wb_rst), .clr(clear_rx1), - .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), - .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q), - .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), - .debug() ); - - vita_rx_chain #(.BASE(SR_RX_CTRL1), .UNIT(1), .FIFOSIZE(10), .PROT_ENG_FLAGS(0), .DSP_NUMBER(1)) vita_rx_chain1 - (.clk(wb_clk),.reset(wb_rst), - .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), - .vita_time(vita_time), .overrun(rx_overrun_dsp1), - .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), .clear_o(clear_rx1), - .rx_data_o(vita_rx_data1), .rx_dst_rdy_i(vita_rx_dst_rdy1), .rx_src_rdy_o(vita_rx_src_rdy1), - .debug() ); - - // ///////////////////////////////////////////////////////////////////////// - // RX Stream muxing - - fifo36_mux #(.prio(0)) mux_data_streams - (.clk(wb_clk), .reset(wb_rst), .clear(clear_fifo), - .data0_i(vita_rx_data0), .src0_rdy_i(vita_rx_src_rdy0), .dst0_rdy_o(vita_rx_dst_rdy0), - .data1_i(vita_rx_data1), .src1_rdy_i(vita_rx_src_rdy1), .dst1_rdy_o(vita_rx_dst_rdy1), - .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy)); - - // /////////////////////////////////////////////////////////////////////////////////// - // DSP TX - - wire run_tx; - wire [23:0] tx_fe_i, tx_fe_q; - wire [31:0] sample_tx; - wire strobe_tx, clear_tx; - - vita_tx_chain #(.BASE(SR_TX_CTRL), .FIFOSIZE(10), .POST_ENGINE_FIFOSIZE(11), - .REPORT_ERROR(1), .DO_FLOW_CONTROL(0), - .PROT_ENG_FLAGS(0), .USE_TRANS_HEADER(0), - .DSP_NUMBER(0)) - vita_tx_chain - (.clk(wb_clk), .reset(wb_rst), - .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), - .vita_time(vita_time), - .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy), - .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy), - .sample(sample_tx), .strobe(strobe_tx), - .underrun(tx_underrun_dsp), .run(run_tx), .clear_o(clear_tx), - .debug(debug_vt)); - - duc_chain #(.BASE(SR_TX_DSP), .DSPNO(0)) duc_chain - (.clk(wb_clk), .rst(wb_rst), .clr(clear_tx), - .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), - .tx_fe_i(tx_fe_i),.tx_fe_q(tx_fe_q), - .sample(sample_tx), .run(run_tx), .strobe(strobe_tx), - .debug() ); - - tx_frontend #(.BASE(SR_TX_FRONT), .WIDTH_OUT(14)) tx_frontend - (.clk(wb_clk), .rst(wb_rst), - .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .tx_i(tx_fe_i), .tx_q(tx_fe_q), .run(1'b1), - .dac_a(tx_i), .dac_b(tx_q)); - - // ///////////////////////////////////////////////////////////////////////////////////// - // Wishbone Intercon, single master - wire [dw-1:0] s0_dat_mosi, s1_dat_mosi, s0_dat_miso, s1_dat_miso, s2_dat_mosi, s3_dat_mosi, s2_dat_miso, s3_dat_miso, - s4_dat_mosi, s5_dat_mosi, s4_dat_miso, s5_dat_miso, s6_dat_mosi, s7_dat_mosi, s6_dat_miso, s7_dat_miso, - s8_dat_mosi, s9_dat_mosi, s8_dat_miso, s9_dat_miso, sa_dat_mosi, sb_dat_mosi, sa_dat_miso, sb_dat_miso, - sc_dat_mosi, sd_dat_mosi, sc_dat_miso, sd_dat_miso, se_dat_mosi, sf_dat_mosi, se_dat_miso, sf_dat_miso; - wire [aw-1:0] s0_adr,s1_adr,s2_adr,s3_adr,s4_adr,s5_adr,s6_adr,s7_adr; - wire [aw-1:0] s8_adr,s9_adr,sa_adr,sb_adr,sc_adr, sd_adr, se_adr, sf_adr; - wire [sw-1:0] s0_sel,s1_sel,s2_sel,s3_sel,s4_sel,s5_sel,s6_sel,s7_sel; - wire [sw-1:0] s8_sel,s9_sel,sa_sel,sb_sel,sc_sel, sd_sel, se_sel, sf_sel; - wire s0_ack,s1_ack,s2_ack,s3_ack,s4_ack,s5_ack,s6_ack,s7_ack; - wire s8_ack,s9_ack,sa_ack,sb_ack,sc_ack, sd_ack, se_ack, sf_ack; - wire s0_stb,s1_stb,s2_stb,s3_stb,s4_stb,s5_stb,s6_stb,s7_stb; - wire s8_stb,s9_stb,sa_stb,sb_stb,sc_stb, sd_stb, se_stb, sf_stb; - wire s0_cyc,s1_cyc,s2_cyc,s3_cyc,s4_cyc,s5_cyc,s6_cyc,s7_cyc; - wire s8_cyc,s9_cyc,sa_cyc,sb_cyc,sc_cyc, sd_cyc, se_cyc, sf_cyc; - wire s0_we,s1_we,s2_we,s3_we,s4_we,s5_we,s6_we,s7_we; - wire s8_we,s9_we,sa_we,sb_we,sc_we,sd_we, se_we, sf_we; - - wb_1master #(.dw(dw), .aw(aw), .sw(sw), .decode_w(4), - .s0_addr(4'h0), .s0_mask(4'hF), // Misc Regs - .s1_addr(4'h1), .s1_mask(4'hF), // Unused - .s2_addr(4'h2), .s2_mask(4'hF), // SPI - .s3_addr(4'h3), .s3_mask(4'hF), // I2C - .s4_addr(4'h4), .s4_mask(4'hF), // Unused - .s5_addr(4'h5), .s5_mask(4'hF), // Unused on B1x0, Async Msg on E1x0 - .s6_addr(4'h6), .s6_mask(4'hF), // Unused - .s7_addr(4'h7), .s7_mask(4'hF), // Readback MUX - .s8_addr(4'h8), .s8_mask(4'h8), // Setting Regs -- slave 8 is 8 slaves wide - // slaves 9-f alias to slave 1, all are unused - .s9_addr(4'h1), .s9_mask(4'hF), - .sa_addr(4'h1), .sa_mask(4'hF), .sb_addr(4'h1), .sb_mask(4'hF), - .sc_addr(4'h1), .sc_mask(4'hF), .sd_addr(4'h1), .sd_mask(4'hF), - .se_addr(4'h1), .se_mask(4'hF), .sf_addr(4'h1), .sf_mask(4'hF)) - wb_1master - (.clk_i(wb_clk),.rst_i(wb_rst), - .m0_dat_o(m0_dat_miso),.m0_ack_o(m0_ack),.m0_err_o(m0_err),.m0_rty_o(m0_rty),.m0_dat_i(m0_dat_mosi), - .m0_adr_i(m0_adr),.m0_sel_i(m0_sel),.m0_we_i(m0_we),.m0_cyc_i(m0_cyc),.m0_stb_i(m0_stb), - .s0_dat_o(s0_dat_mosi),.s0_adr_o(s0_adr),.s0_sel_o(s0_sel),.s0_we_o(s0_we),.s0_cyc_o(s0_cyc),.s0_stb_o(s0_stb), - .s0_dat_i(s0_dat_miso),.s0_ack_i(s0_ack),.s0_err_i(0),.s0_rty_i(0), - .s1_dat_o(s1_dat_mosi),.s1_adr_o(s1_adr),.s1_sel_o(s1_sel),.s1_we_o(s1_we),.s1_cyc_o(s1_cyc),.s1_stb_o(s1_stb), - .s1_dat_i(s1_dat_miso),.s1_ack_i(s1_ack),.s1_err_i(0),.s1_rty_i(0), - .s2_dat_o(s2_dat_mosi),.s2_adr_o(s2_adr),.s2_sel_o(s2_sel),.s2_we_o(s2_we),.s2_cyc_o(s2_cyc),.s2_stb_o(s2_stb), - .s2_dat_i(s2_dat_miso),.s2_ack_i(s2_ack),.s2_err_i(0),.s2_rty_i(0), - .s3_dat_o(s3_dat_mosi),.s3_adr_o(s3_adr),.s3_sel_o(s3_sel),.s3_we_o(s3_we),.s3_cyc_o(s3_cyc),.s3_stb_o(s3_stb), - .s3_dat_i(s3_dat_miso),.s3_ack_i(s3_ack),.s3_err_i(0),.s3_rty_i(0), - .s4_dat_o(s4_dat_mosi),.s4_adr_o(s4_adr),.s4_sel_o(s4_sel),.s4_we_o(s4_we),.s4_cyc_o(s4_cyc),.s4_stb_o(s4_stb), - .s4_dat_i(s4_dat_miso),.s4_ack_i(s4_ack),.s4_err_i(0),.s4_rty_i(0), - .s5_dat_o(s5_dat_mosi),.s5_adr_o(s5_adr),.s5_sel_o(s5_sel),.s5_we_o(s5_we),.s5_cyc_o(s5_cyc),.s5_stb_o(s5_stb), - .s5_dat_i(s5_dat_miso),.s5_ack_i(s5_ack),.s5_err_i(0),.s5_rty_i(0), - .s6_dat_o(s6_dat_mosi),.s6_adr_o(s6_adr),.s6_sel_o(s6_sel),.s6_we_o(s6_we),.s6_cyc_o(s6_cyc),.s6_stb_o(s6_stb), - .s6_dat_i(s6_dat_miso),.s6_ack_i(s6_ack),.s6_err_i(0),.s6_rty_i(0), - .s7_dat_o(s7_dat_mosi),.s7_adr_o(s7_adr),.s7_sel_o(s7_sel),.s7_we_o(s7_we),.s7_cyc_o(s7_cyc),.s7_stb_o(s7_stb), - .s7_dat_i(s7_dat_miso),.s7_ack_i(s7_ack),.s7_err_i(0),.s7_rty_i(0), - .s8_dat_o(s8_dat_mosi),.s8_adr_o(s8_adr),.s8_sel_o(s8_sel),.s8_we_o(s8_we),.s8_cyc_o(s8_cyc),.s8_stb_o(s8_stb), - .s8_dat_i(s8_dat_miso),.s8_ack_i(s8_ack),.s8_err_i(0),.s8_rty_i(0), - .s9_dat_o(s9_dat_mosi),.s9_adr_o(s9_adr),.s9_sel_o(s9_sel),.s9_we_o(s9_we),.s9_cyc_o(s9_cyc),.s9_stb_o(s9_stb), - .s9_dat_i(s9_dat_miso),.s9_ack_i(s9_ack),.s9_err_i(0),.s9_rty_i(0), - .sa_dat_o(sa_dat_mosi),.sa_adr_o(sa_adr),.sa_sel_o(sa_sel),.sa_we_o(sa_we),.sa_cyc_o(sa_cyc),.sa_stb_o(sa_stb), - .sa_dat_i(sa_dat_miso),.sa_ack_i(sa_ack),.sa_err_i(0),.sa_rty_i(0), - .sb_dat_o(sb_dat_mosi),.sb_adr_o(sb_adr),.sb_sel_o(sb_sel),.sb_we_o(sb_we),.sb_cyc_o(sb_cyc),.sb_stb_o(sb_stb), - .sb_dat_i(sb_dat_miso),.sb_ack_i(sb_ack),.sb_err_i(0),.sb_rty_i(0), - .sc_dat_o(sc_dat_mosi),.sc_adr_o(sc_adr),.sc_sel_o(sc_sel),.sc_we_o(sc_we),.sc_cyc_o(sc_cyc),.sc_stb_o(sc_stb), - .sc_dat_i(sc_dat_miso),.sc_ack_i(sc_ack),.sc_err_i(0),.sc_rty_i(0), - .sd_dat_o(sd_dat_mosi),.sd_adr_o(sd_adr),.sd_sel_o(sd_sel),.sd_we_o(sd_we),.sd_cyc_o(sd_cyc),.sd_stb_o(sd_stb), - .sd_dat_i(sd_dat_miso),.sd_ack_i(sd_ack),.sd_err_i(0),.sd_rty_i(0), - .se_dat_o(se_dat_mosi),.se_adr_o(se_adr),.se_sel_o(se_sel),.se_we_o(se_we),.se_cyc_o(se_cyc),.se_stb_o(se_stb), - .se_dat_i(se_dat_miso),.se_ack_i(se_ack),.se_err_i(0),.se_rty_i(0), - .sf_dat_o(sf_dat_mosi),.sf_adr_o(sf_adr),.sf_sel_o(sf_sel),.sf_we_o(sf_we),.sf_cyc_o(sf_cyc),.sf_stb_o(sf_stb), - .sf_dat_i(sf_dat_miso),.sf_ack_i(sf_ack),.sf_err_i(0),.sf_rty_i(0) ); - - assign s1_ack = 0; assign s4_ack = 0; assign s6_ack = 0; - assign s9_ack = 0; assign sa_ack = 0; assign sb_ack = 0; - assign sc_ack = 0; assign sd_ack = 0; assign se_ack = 0; assign sf_ack = 0; - - // ///////////////////////////////////////////////////////////////////////////////////// - // Slave 0, Misc LEDs, Switches, controls - - localparam REG_CGEN_CTRL = 7'd4; // out - localparam REG_CGEN_ST = 7'd6; // in - localparam REG_TEST = 7'd8; // out - localparam REG_XFER_RATE = 7'd14; // out - - always @(posedge wb_clk) - if(wb_rst) - begin - reg_cgen_ctrl <= 2'b11; - reg_test <= 0; - xfer_rate <= 0; - end - else - if(s0_cyc & s0_stb & s0_we) - case(s0_adr[6:0]) - REG_CGEN_CTRL : - reg_cgen_ctrl <= s0_dat_mosi; - REG_TEST : - reg_test <= s0_dat_mosi; - REG_XFER_RATE : - xfer_rate <= s0_dat_mosi; - endcase // case (s0_adr[6:0]) - - assign test_ctrl = xfer_rate[11:8]; - assign test_rate = xfer_rate[7:0]; - - assign { debug_led[3:0] } = ~{1'b1, run_tx, run_rx0 | run_rx1, cgen_st_ld}; - assign { cgen_sync_b, cgen_ref_sel } = reg_cgen_ctrl; - - assign s0_dat_miso = (s0_adr[6:0] == REG_CGEN_CTRL) ? reg_cgen_ctrl : - (s0_adr[6:0] == REG_CGEN_ST) ? {13'b0,cgen_st_status,cgen_st_ld,cgen_st_refmon} : - (s0_adr[6:0] == REG_TEST) ? reg_test : - 16'hBEEF; - - assign s0_ack = s0_stb & s0_cyc; - - // ///////////////////////////////////////////////////////////////////////////////////// - // Slave 2, SPI - - spi_top16 shared_spi - (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst),.wb_adr_i(s2_adr[4:0]),.wb_dat_i(s2_dat_mosi), - .wb_dat_o(s2_dat_miso),.wb_sel_i(s2_sel),.wb_we_i(s2_we),.wb_stb_i(s2_stb), - .wb_cyc_i(s2_cyc),.wb_ack_o(s2_ack),.wb_err_o(),.wb_int_o(), - .ss_pad_o(sen), .sclk_pad_o(sclk), .mosi_pad_o(mosi), .miso_pad_i(miso) ); - - // ///////////////////////////////////////////////////////////////////////// - // Slave 3, I2C - - wire scl_pad_i, scl_pad_o, scl_pad_oen_o, sda_pad_i, sda_pad_o, sda_pad_oen_o; - i2c_master_top #(.ARST_LVL(1)) i2c - (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst),.arst_i(1'b0), - .wb_adr_i(s3_adr[3:1]),.wb_dat_i(s3_dat_mosi[7:0]),.wb_dat_o(s3_dat_miso[7:0]), - .wb_we_i(s3_we),.wb_stb_i(s3_stb),.wb_cyc_i(s3_cyc), - .wb_ack_o(s3_ack),.wb_inta_o(), - .scl_pad_i(scl_pad_i),.scl_pad_o(scl_pad_o),.scl_padoen_o(scl_pad_oen_o), - .sda_pad_i(sda_pad_i),.sda_pad_o(sda_pad_o),.sda_padoen_o(sda_pad_oen_o) ); - - assign s3_dat_miso[15:8] = 8'd0; - - // I2C -- Don't use external transistors for open drain, the FPGA implements this - IOBUF scl_pin(.O(scl_pad_i), .IO(db_scl), .I(scl_pad_o), .T(scl_pad_oen_o)); - IOBUF sda_pin(.O(sda_pad_i), .IO(db_sda), .I(sda_pad_o), .T(sda_pad_oen_o)); - - // ///////////////////////////////////////////////////////////////////////// - // GPIOs - - wire [31:0] gpio_readback; - - gpio_atr #(.BASE(SR_GPIO), .WIDTH(32)) - gpio_atr(.clk(wb_clk),.reset(wb_rst), - .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .rx(run_rx0 | run_rx1), .tx(run_tx), - .gpio({io_tx,io_rx}), .gpio_readback(gpio_readback) ); - - //////////////////////////////////////////////////////////////////////////// - // FIFO to WB slave for async messages - Slave #5 - - //signals between fifo and buffer module - wire [35:0] _tx_err_data; - wire _tx_err_src_rdy, _tx_err_dst_rdy; - - fifo_cascade #(.WIDTH(36), .SIZE(9/*512 lines plenty for short pkts*/)) err_fifo( - .clk(wb_clk), .reset(wb_rst), .clear(wb_rst), - .datain(tx_err_data), .src_rdy_i(tx_err_src_rdy), .dst_rdy_o(tx_err_dst_rdy), - .dataout(_tx_err_data), .src_rdy_o(_tx_err_src_rdy), .dst_rdy_i(_tx_err_dst_rdy) - ); - - wire [31:0] err_status, err_data32; - //the buffer is 32 bits, but the data is 16, so mux based on the addr bit - assign s5_dat_miso = (s5_adr[1] == 1'b0)? err_data32[15:0] : err_data32[31:16]; - - buffer_int2 #(.BASE(SR_ERR_CTRL), .BUF_SIZE(5)) fifo_to_wb( - .clk(wb_clk), .rst(wb_rst), - .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), - .status(err_status), - // Wishbone interface to RAM - .wb_clk_i(wb_clk), .wb_rst_i(wb_rst), - .wb_we_i(s5_we), .wb_stb_i(s5_stb), - .wb_adr_i({5'b0,s5_adr}), .wb_dat_i({16'b0, s5_dat_mosi}), - .wb_dat_o(err_data32), .wb_ack_o(s5_ack), - // Write FIFO Interface - .wr_data_i(_tx_err_data), .wr_ready_i(_tx_err_src_rdy), .wr_ready_o(_tx_err_dst_rdy), - // Read FIFO Interface - .rd_data_o(), .rd_ready_o(), .rd_ready_i(1'b0) - ); - - //////////////////////////////////////////////////////////////////////////// - // Interrupts - - always @(posedge wb_clk) - proc_int <= (|err_status[1:0]); - - // ///////////////////////////////////////////////////////////////////////// - // Settings Bus -- Slave #8 + 9 - - // only have 64 regs, 32 bits each with current setup... - settings_bus_16LE #(.AWIDTH(11),.RWIDTH(8)) settings_bus_16LE - (.wb_clk(wb_clk),.wb_rst(wb_rst),.wb_adr_i(s8_adr),.wb_dat_i(s8_dat_mosi), - .wb_stb_i(s8_stb),.wb_we_i(s8_we),.wb_ack_o(s8_ack), - .strobe(set_stb),.addr(set_addr),.data(set_data) ); - - user_settings #(.BASE(SR_USER_REGS)) user_settings - (.clk(wb_clk),.rst(wb_rst),.set_stb(set_stb), - .set_addr(set_addr),.set_data(set_data), - .set_addr_user(set_addr_user),.set_data_user(set_data_user), - .set_stb_user(set_stb_user) ); - - // ///////////////////////////////////////////////////////////////////////// - // Readback mux 32 -- Slave #7 - - //compatibility number -> increment when the fpga has been sufficiently altered - localparam compat_num = {16'd10, 16'd2}; //major, minor - - wire [31:0] reg_test32; - - //this setting reg is persistent across resets, to check for fpga loaded - setting_reg #(.my_addr(SR_REG_TEST32)) sr_reg_test32 - (.clk(wb_clk),.rst(/*wb_rst*/1'b0),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(reg_test32),.changed()); - - wb_readback_mux_16LE readback_mux_32 - (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s7_stb), - .wb_adr_i({5'b0,s7_adr}), .wb_dat_o(s7_dat_miso), .wb_ack_o(s7_ack), - - .word00(vita_time[63:32]), .word01(vita_time[31:0]), - .word02(vita_time_pps[63:32]), .word03(vita_time_pps[31:0]), - .word04(reg_test32), .word05(err_status), - .word06(compat_num), .word07(gpio_readback), - .word08(32'b0), .word09(32'b0), - .word10(32'b0), .word11(32'b0), - .word12(32'b0), .word13(32'b0), - .word14(32'b0), .word15(32'b0) - ); - - // ///////////////////////////////////////////////////////////////////////// - // VITA Timing - - time_64bit #(.BASE(SR_TIME64)) time_64bit - (.clk(wb_clk), .rst(wb_rst), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), - .pps(pps_in), .vita_time(vita_time), .vita_time_pps(vita_time_pps), .pps_int(pps_int), - .exp_time_in(0)); - - // ///////////////////////////////////////////////////////////////////////////////////// - // Debug circuitry - - assign debug_clk = 2'b00; //{ EM_CLK, clk_fpga }; - assign debug = 0; - -endmodule // u1e_core |