fpga: performed a forceful checkout of fpga to overwrite with current fpga code

6 files changed, 291 insertions, 117 deletions

diff --git a/fpga/usrp2/opencores/spi/rtl/verilog/spi_clgen.v b/fpga/usrp2/opencores/spi/rtl/verilog/spi_clgen.v
index 7bc4f6e5e..2d9c34f40 100644
--- a/fpga/usrp2/opencores/spi/rtl/verilog/spi_clgen.v
+++ b/fpga/usrp2/opencores/spi/rtl/verilog/spi_clgen.v
@@ -39,12 +39,9 @@
 //////////////////////////////////////////////////////////////////////
 
 `include "spi_defines.v"
-`include "timescale.v"
 
 module spi_clgen (clk_in, rst, go, enable, last_clk, divider, clk_out, pos_edge, neg_edge); 
 
-  parameter Tp = 1;
-  
   input                            clk_in;   // input clock (system clock)
   input                            rst;      // reset
   input                            enable;   // clock enable
@@ -68,40 +65,40 @@ module spi_clgen (clk_in, rst, go, enable, last_clk, divider, clk_out, pos_edge,
   assign cnt_one  = cnt == {{`SPI_DIVIDER_LEN-1{1'b0}}, 1'b1};
   
   // Counter counts half period
-  always @(posedge clk_in or posedge rst)
+  always @(posedge clk_in)
   begin
     if(rst)
-      cnt <= #Tp {`SPI_DIVIDER_LEN{1'b1}};
+      cnt <= {`SPI_DIVIDER_LEN{1'b1}};
     else
       begin
         if(!enable || cnt_zero)
-          cnt <= #Tp divider;
+          cnt <= divider;
         else
-          cnt <= #Tp cnt - {{`SPI_DIVIDER_LEN-1{1'b0}}, 1'b1};
+          cnt <= cnt - {{`SPI_DIVIDER_LEN-1{1'b0}}, 1'b1};
       end
   end
   
   // clk_out is asserted every other half period
-  always @(posedge clk_in or posedge rst)
+  always @(posedge clk_in)
   begin
     if(rst)
-      clk_out <= #Tp 1'b0;
+      clk_out <= 1'b0;
     else
-      clk_out <= #Tp (enable && cnt_zero && (!last_clk || clk_out)) ? ~clk_out : clk_out;
+      clk_out <= (enable && cnt_zero && (!last_clk || clk_out)) ? ~clk_out : clk_out;
   end
    
   // Pos and neg edge signals
-  always @(posedge clk_in or posedge rst)
+  always @(posedge clk_in)
   begin
     if(rst)
       begin
-        pos_edge  <= #Tp 1'b0;
-        neg_edge  <= #Tp 1'b0;
+        pos_edge  <= 1'b0;
+        neg_edge  <= 1'b0;
       end
     else
       begin
-        pos_edge  <= #Tp (enable && !clk_out && cnt_one) || (!(|divider) && clk_out) || (!(|divider) && go && !enable);
-        neg_edge  <= #Tp (enable && clk_out && cnt_one) || (!(|divider) && !clk_out && enable);
+        pos_edge  <= (enable && !clk_out && cnt_one) || (!(|divider) && clk_out) || (!(|divider) && go && !enable);
+        neg_edge  <= (enable && clk_out && cnt_one) || (!(|divider) && !clk_out && enable);
       end
   end
 endmodule
diff --git a/fpga/usrp2/opencores/spi/rtl/verilog/spi_defines.v b/fpga/usrp2/opencores/spi/rtl/verilog/spi_defines.v
index a6925918e..3e4dd0e3c 100644
--- a/fpga/usrp2/opencores/spi/rtl/verilog/spi_defines.v
+++ b/fpga/usrp2/opencores/spi/rtl/verilog/spi_defines.v
@@ -43,8 +43,8 @@
 // low frequency of system clock this can be reduced.
 // Use SPI_DIVIDER_LEN for fine tuning theexact number.
 //
-//`define SPI_DIVIDER_LEN_8
-`define SPI_DIVIDER_LEN_16
+`define SPI_DIVIDER_LEN_8
+//`define SPI_DIVIDER_LEN_16
 //`define SPI_DIVIDER_LEN_24
 //`define SPI_DIVIDER_LEN_32
 
@@ -102,8 +102,8 @@
 // Number of device select signals. Use SPI_SS_NB for fine tuning the 
 // exact number.
 //
-`define SPI_SS_NB_8
-//`define SPI_SS_NB_16
+//`define SPI_SS_NB_8
+`define SPI_SS_NB_16
 //`define SPI_SS_NB_24
 //`define SPI_SS_NB_32
 
@@ -137,7 +137,7 @@
 `define SPI_TX_2                2
 `define SPI_TX_3                3
 `define SPI_CTRL                4
-`define SPI_DEVIDE              5
+`define SPI_DIVIDE              5
 `define SPI_SS                  6
 
 //
diff --git a/fpga/usrp2/opencores/spi/rtl/verilog/spi_shift.v b/fpga/usrp2/opencores/spi/rtl/verilog/spi_shift.v
index b17ac8b1f..ac3bb3f48 100644
--- a/fpga/usrp2/opencores/spi/rtl/verilog/spi_shift.v
+++ b/fpga/usrp2/opencores/spi/rtl/verilog/spi_shift.v
@@ -39,15 +39,12 @@
 //////////////////////////////////////////////////////////////////////
 
 `include "spi_defines.v"
-`include "timescale.v"
 
 module spi_shift (clk, rst, latch, byte_sel, len, lsb, go,
                   pos_edge, neg_edge, rx_negedge, tx_negedge,
                   tip, last, 
                   p_in, p_out, s_clk, s_in, s_out);
 
-  parameter Tp = 1;
-  
   input                          clk;          // system clock
   input                          rst;          // reset
   input                    [3:0] latch;        // latch signal for storing the data in shift register
@@ -89,149 +86,149 @@ module spi_shift (clk, rst, latch, byte_sel, len, lsb, go,
   assign tx_clk = (tx_negedge ? neg_edge : pos_edge) && !last;
   
   // Character bit counter
-  always @(posedge clk or posedge rst)
+  always @(posedge clk)
   begin
     if(rst)
-      cnt <= #Tp {`SPI_CHAR_LEN_BITS+1{1'b0}};
+      cnt <= {`SPI_CHAR_LEN_BITS+1{1'b0}};
     else
       begin
         if(tip)
-          cnt <= #Tp pos_edge ? (cnt - {{`SPI_CHAR_LEN_BITS{1'b0}}, 1'b1}) : cnt;
+          cnt <= pos_edge ? (cnt - {{`SPI_CHAR_LEN_BITS{1'b0}}, 1'b1}) : cnt;
         else
-          cnt <= #Tp !(|len) ? {1'b1, {`SPI_CHAR_LEN_BITS{1'b0}}} : {1'b0, len};
+          cnt <= !(|len) ? {1'b1, {`SPI_CHAR_LEN_BITS{1'b0}}} : {1'b0, len};
       end
   end
   
   // Transfer in progress
-  always @(posedge clk or posedge rst)
+  always @(posedge clk)
   begin
     if(rst)
-      tip <= #Tp 1'b0;
+      tip <= 1'b0;
   else if(go && ~tip)
-    tip <= #Tp 1'b1;
+    tip <= 1'b1;
   else if(tip && last && pos_edge)
-    tip <= #Tp 1'b0;
+    tip <= 1'b0;
   end
   
   // Sending bits to the line
-  always @(posedge clk or posedge rst)
+  always @(posedge clk)
   begin
     if (rst)
-      s_out   <= #Tp 1'b0;
+      s_out   <= 1'b0;
     else
-      s_out <= #Tp (tx_clk || !tip) ? data[tx_bit_pos[`SPI_CHAR_LEN_BITS-1:0]] : s_out;
+      s_out <= (tx_clk || !tip) ? data[tx_bit_pos[`SPI_CHAR_LEN_BITS-1:0]] : s_out;
   end
   
   // Receiving bits from the line
-  always @(posedge clk or posedge rst)
+  always @(posedge clk)
   begin
     if (rst)
-      data   <= #Tp {`SPI_MAX_CHAR{1'b0}};
+      data   <= {`SPI_MAX_CHAR{1'b0}};
 `ifdef SPI_MAX_CHAR_128
     else if (latch[0] && !tip)
       begin
         if (byte_sel[3])
-          data[31:24] <= #Tp p_in[31:24];
+          data[31:24] <= p_in[31:24];
         if (byte_sel[2])
-          data[23:16] <= #Tp p_in[23:16];
+          data[23:16] <= p_in[23:16];
         if (byte_sel[1])
-          data[15:8] <= #Tp p_in[15:8];
+          data[15:8] <= p_in[15:8];
         if (byte_sel[0])
-          data[7:0] <= #Tp p_in[7:0];
+          data[7:0] <= p_in[7:0];
       end
     else if (latch[1] && !tip)
       begin
         if (byte_sel[3])
-          data[63:56] <= #Tp p_in[31:24];
+          data[63:56] <= p_in[31:24];
         if (byte_sel[2])
-          data[55:48] <= #Tp p_in[23:16];
+          data[55:48] <= p_in[23:16];
         if (byte_sel[1])
-          data[47:40] <= #Tp p_in[15:8];
+          data[47:40] <= p_in[15:8];
         if (byte_sel[0])
-          data[39:32] <= #Tp p_in[7:0];
+          data[39:32] <= p_in[7:0];
       end
     else if (latch[2] && !tip)
       begin
         if (byte_sel[3])
-          data[95:88] <= #Tp p_in[31:24];
+          data[95:88] <= p_in[31:24];
         if (byte_sel[2])
-          data[87:80] <= #Tp p_in[23:16];
+          data[87:80] <= p_in[23:16];
         if (byte_sel[1])
-          data[79:72] <= #Tp p_in[15:8];
+          data[79:72] <= p_in[15:8];
         if (byte_sel[0])
-          data[71:64] <= #Tp p_in[7:0];
+          data[71:64] <= p_in[7:0];
       end
     else if (latch[3] && !tip)
       begin
         if (byte_sel[3])
-          data[127:120] <= #Tp p_in[31:24];
+          data[127:120] <= p_in[31:24];
         if (byte_sel[2])
-          data[119:112] <= #Tp p_in[23:16];
+          data[119:112] <= p_in[23:16];
         if (byte_sel[1])
-          data[111:104] <= #Tp p_in[15:8];
+          data[111:104] <= p_in[15:8];
         if (byte_sel[0])
-          data[103:96] <= #Tp p_in[7:0];
+          data[103:96] <= p_in[7:0];
       end
 `else
 `ifdef SPI_MAX_CHAR_64
     else if (latch[0] && !tip)
       begin
         if (byte_sel[3])
-          data[31:24] <= #Tp p_in[31:24];
+          data[31:24] <= p_in[31:24];
         if (byte_sel[2])
-          data[23:16] <= #Tp p_in[23:16];
+          data[23:16] <= p_in[23:16];
         if (byte_sel[1])
-          data[15:8] <= #Tp p_in[15:8];
+          data[15:8] <= p_in[15:8];
         if (byte_sel[0])
-          data[7:0] <= #Tp p_in[7:0];
+          data[7:0] <= p_in[7:0];
       end
     else if (latch[1] && !tip)
       begin
         if (byte_sel[3])
-          data[63:56] <= #Tp p_in[31:24];
+          data[63:56] <= p_in[31:24];
         if (byte_sel[2])
-          data[55:48] <= #Tp p_in[23:16];
+          data[55:48] <= p_in[23:16];
         if (byte_sel[1])
-          data[47:40] <= #Tp p_in[15:8];
+          data[47:40] <= p_in[15:8];
         if (byte_sel[0])
-          data[39:32] <= #Tp p_in[7:0];
+          data[39:32] <= p_in[7:0];
       end
 `else
     else if (latch[0] && !tip)
       begin
       `ifdef SPI_MAX_CHAR_8
         if (byte_sel[0])
-          data[`SPI_MAX_CHAR-1:0] <= #Tp p_in[`SPI_MAX_CHAR-1:0];
+          data[`SPI_MAX_CHAR-1:0] <= p_in[`SPI_MAX_CHAR-1:0];
       `endif
       `ifdef SPI_MAX_CHAR_16
         if (byte_sel[0])
-          data[7:0] <= #Tp p_in[7:0];
+          data[7:0] <= p_in[7:0];
         if (byte_sel[1])
-          data[`SPI_MAX_CHAR-1:8] <= #Tp p_in[`SPI_MAX_CHAR-1:8];
+          data[`SPI_MAX_CHAR-1:8] <= p_in[`SPI_MAX_CHAR-1:8];
       `endif
       `ifdef SPI_MAX_CHAR_24
         if (byte_sel[0])
-          data[7:0] <= #Tp p_in[7:0];
+          data[7:0] <= p_in[7:0];
         if (byte_sel[1])
-          data[15:8] <= #Tp p_in[15:8];
+          data[15:8] <= p_in[15:8];
         if (byte_sel[2])
-          data[`SPI_MAX_CHAR-1:16] <= #Tp p_in[`SPI_MAX_CHAR-1:16];
+          data[`SPI_MAX_CHAR-1:16] <= p_in[`SPI_MAX_CHAR-1:16];
       `endif
       `ifdef SPI_MAX_CHAR_32
         if (byte_sel[0])
-          data[7:0] <= #Tp p_in[7:0];
+          data[7:0] <= p_in[7:0];
         if (byte_sel[1])
-          data[15:8] <= #Tp p_in[15:8];
+          data[15:8] <= p_in[15:8];
         if (byte_sel[2])
-          data[23:16] <= #Tp p_in[23:16];
+          data[23:16] <= p_in[23:16];
         if (byte_sel[3])
-          data[`SPI_MAX_CHAR-1:24] <= #Tp p_in[`SPI_MAX_CHAR-1:24];
+          data[`SPI_MAX_CHAR-1:24] <= p_in[`SPI_MAX_CHAR-1:24];
       `endif
       end
 `endif
 `endif
     else
-      data[rx_bit_pos[`SPI_CHAR_LEN_BITS-1:0]] <= #Tp rx_clk ? s_in : data[rx_bit_pos[`SPI_CHAR_LEN_BITS-1:0]];
+      data[rx_bit_pos[`SPI_CHAR_LEN_BITS-1:0]] <= rx_clk ? s_in : data[rx_bit_pos[`SPI_CHAR_LEN_BITS-1:0]];
   end
   
 endmodule
diff --git a/fpga/usrp2/opencores/spi/rtl/verilog/spi_top.v b/fpga/usrp2/opencores/spi/rtl/verilog/spi_top.v
index 09b2e50e1..8289449a9 100644
--- a/fpga/usrp2/opencores/spi/rtl/verilog/spi_top.v
+++ b/fpga/usrp2/opencores/spi/rtl/verilog/spi_top.v
@@ -1,3 +1,6 @@
+
+// Modified 2010 by Matt Ettus to remove old verilog style
+
 //////////////////////////////////////////////////////////////////////
 ////                                                              ////
 ////  spi_top.v                                                   ////
@@ -40,7 +43,6 @@
 
 
 `include "spi_defines.v"
-`include "timescale.v"
 
 module spi_top
 (
@@ -52,8 +54,6 @@ module spi_top
   ss_pad_o, sclk_pad_o, mosi_pad_o, miso_pad_i
 );
 
-  parameter Tp = 1;
-
   // Wishbone signals
   input                            wb_clk_i;         // master clock input
   input                            wb_rst_i;         // synchronous active high reset
@@ -101,7 +101,7 @@ module spi_top
   wire                             last_bit;         // marks last character bit
   
   // Address decoder
-  assign spi_divider_sel = wb_cyc_i & wb_stb_i & (wb_adr_i[`SPI_OFS_BITS] == `SPI_DEVIDE);
+  assign spi_divider_sel = wb_cyc_i & wb_stb_i & (wb_adr_i[`SPI_OFS_BITS] == `SPI_DIVIDE);
   assign spi_ctrl_sel    = wb_cyc_i & wb_stb_i & (wb_adr_i[`SPI_OFS_BITS] == `SPI_CTRL);
   assign spi_tx_sel[0]   = wb_cyc_i & wb_stb_i & (wb_adr_i[`SPI_OFS_BITS] == `SPI_TX_0);
   assign spi_tx_sel[1]   = wb_cyc_i & wb_stb_i & (wb_adr_i[`SPI_OFS_BITS] == `SPI_TX_1);
@@ -132,96 +132,96 @@ module spi_top
 `endif
 `endif
       `SPI_CTRL:    wb_dat = {{32-`SPI_CTRL_BIT_NB{1'b0}}, ctrl};
-      `SPI_DEVIDE:  wb_dat = {{32-`SPI_DIVIDER_LEN{1'b0}}, divider};
+      `SPI_DIVIDE:  wb_dat = {{32-`SPI_DIVIDER_LEN{1'b0}}, divider};
       `SPI_SS:      wb_dat = {{32-`SPI_SS_NB{1'b0}}, ss};
       default:      wb_dat = 32'bx;
     endcase
   end
   
   // Wb data out
-  always @(posedge wb_clk_i or posedge wb_rst_i)
+  always @(posedge wb_clk_i)
   begin
     if (wb_rst_i)
-      wb_dat_o <= #Tp 32'b0;
+      wb_dat_o <= 32'b0;
     else
-      wb_dat_o <= #Tp wb_dat;
+      wb_dat_o <= wb_dat;
   end
   
   // Wb acknowledge
-  always @(posedge wb_clk_i or posedge wb_rst_i)
+  always @(posedge wb_clk_i)
   begin
     if (wb_rst_i)
-      wb_ack_o <= #Tp 1'b0;
+      wb_ack_o <= 1'b0;
     else
-      wb_ack_o <= #Tp wb_cyc_i & wb_stb_i & ~wb_ack_o;
+      wb_ack_o <= wb_cyc_i & wb_stb_i & ~wb_ack_o;
   end
   
   // Wb error
   assign wb_err_o = 1'b0;
   
   // Interrupt
-  always @(posedge wb_clk_i or posedge wb_rst_i)
+  always @(posedge wb_clk_i)
   begin
     if (wb_rst_i)
-      wb_int_o <= #Tp 1'b0;
+      wb_int_o <= 1'b0;
     else if (ie && tip && last_bit && pos_edge)
-      wb_int_o <= #Tp 1'b1;
+      wb_int_o <= 1'b1;
     else if (wb_ack_o)
-      wb_int_o <= #Tp 1'b0;
+      wb_int_o <= 1'b0;
   end
   
   // Divider register
-  always @(posedge wb_clk_i or posedge wb_rst_i)
+  always @(posedge wb_clk_i)
   begin
     if (wb_rst_i)
-        divider <= #Tp {`SPI_DIVIDER_LEN{1'b0}};
+        divider <= {`SPI_DIVIDER_LEN{1'b0}};
     else if (spi_divider_sel && wb_we_i && !tip)
       begin
       `ifdef SPI_DIVIDER_LEN_8
         if (wb_sel_i[0])
-          divider <= #Tp wb_dat_i[`SPI_DIVIDER_LEN-1:0];
+          divider <= wb_dat_i[`SPI_DIVIDER_LEN-1:0];
       `endif
       `ifdef SPI_DIVIDER_LEN_16
         if (wb_sel_i[0])
-          divider[7:0] <= #Tp wb_dat_i[7:0];
+          divider[7:0] <= wb_dat_i[7:0];
         if (wb_sel_i[1])
-          divider[`SPI_DIVIDER_LEN-1:8] <= #Tp wb_dat_i[`SPI_DIVIDER_LEN-1:8];
+          divider[`SPI_DIVIDER_LEN-1:8] <= wb_dat_i[`SPI_DIVIDER_LEN-1:8];
       `endif
       `ifdef SPI_DIVIDER_LEN_24
         if (wb_sel_i[0])
-          divider[7:0] <= #Tp wb_dat_i[7:0];
+          divider[7:0] <= wb_dat_i[7:0];
         if (wb_sel_i[1])
-          divider[15:8] <= #Tp wb_dat_i[15:8];
+          divider[15:8] <= wb_dat_i[15:8];
         if (wb_sel_i[2])
-          divider[`SPI_DIVIDER_LEN-1:16] <= #Tp wb_dat_i[`SPI_DIVIDER_LEN-1:16];
+          divider[`SPI_DIVIDER_LEN-1:16] <= wb_dat_i[`SPI_DIVIDER_LEN-1:16];
       `endif
       `ifdef SPI_DIVIDER_LEN_32
         if (wb_sel_i[0])
-          divider[7:0] <= #Tp wb_dat_i[7:0];
+          divider[7:0] <= wb_dat_i[7:0];
         if (wb_sel_i[1])
-          divider[15:8] <= #Tp wb_dat_i[15:8];
+          divider[15:8] <= wb_dat_i[15:8];
         if (wb_sel_i[2])
-          divider[23:16] <= #Tp wb_dat_i[23:16];
+          divider[23:16] <= wb_dat_i[23:16];
         if (wb_sel_i[3])
-          divider[`SPI_DIVIDER_LEN-1:24] <= #Tp wb_dat_i[`SPI_DIVIDER_LEN-1:24];
+          divider[`SPI_DIVIDER_LEN-1:24] <= wb_dat_i[`SPI_DIVIDER_LEN-1:24];
       `endif
       end
   end
   
   // Ctrl register
-  always @(posedge wb_clk_i or posedge wb_rst_i)
+  always @(posedge wb_clk_i)
   begin
     if (wb_rst_i)
-      ctrl <= #Tp {`SPI_CTRL_BIT_NB{1'b0}};
+      ctrl <= {`SPI_CTRL_BIT_NB{1'b0}};
     else if(spi_ctrl_sel && wb_we_i && !tip)
       begin
         if (wb_sel_i[0])
-          ctrl[7:0] <= #Tp wb_dat_i[7:0] | {7'b0, ctrl[0]};
+          ctrl[7:0] <= wb_dat_i[7:0] | {7'b0, ctrl[0]};
         if (wb_sel_i[1])
-          ctrl[`SPI_CTRL_BIT_NB-1:8] <= #Tp wb_dat_i[`SPI_CTRL_BIT_NB-1:8];
+          ctrl[`SPI_CTRL_BIT_NB-1:8] <= wb_dat_i[`SPI_CTRL_BIT_NB-1:8];
       end
     else if(tip && last_bit && pos_edge)
-      ctrl[`SPI_CTRL_GO] <= #Tp 1'b0;
+      ctrl[`SPI_CTRL_GO] <= 1'b0;
   end
   
   assign rx_negedge = ctrl[`SPI_CTRL_RX_NEGEDGE];
@@ -233,39 +233,39 @@ module spi_top
   assign ass        = ctrl[`SPI_CTRL_ASS];
   
   // Slave select register
-  always @(posedge wb_clk_i or posedge wb_rst_i)
+  always @(posedge wb_clk_i)
   begin
     if (wb_rst_i)
-      ss <= #Tp {`SPI_SS_NB{1'b0}};
+      ss <= {`SPI_SS_NB{1'b0}};
     else if(spi_ss_sel && wb_we_i && !tip)
       begin
       `ifdef SPI_SS_NB_8
         if (wb_sel_i[0])
-          ss <= #Tp wb_dat_i[`SPI_SS_NB-1:0];
+          ss <= wb_dat_i[`SPI_SS_NB-1:0];
       `endif
       `ifdef SPI_SS_NB_16
         if (wb_sel_i[0])
-          ss[7:0] <= #Tp wb_dat_i[7:0];
+          ss[7:0] <= wb_dat_i[7:0];
         if (wb_sel_i[1])
-          ss[`SPI_SS_NB-1:8] <= #Tp wb_dat_i[`SPI_SS_NB-1:8];
+          ss[`SPI_SS_NB-1:8] <= wb_dat_i[`SPI_SS_NB-1:8];
       `endif
       `ifdef SPI_SS_NB_24
         if (wb_sel_i[0])
-          ss[7:0] <= #Tp wb_dat_i[7:0];
+          ss[7:0] <= wb_dat_i[7:0];
         if (wb_sel_i[1])
-          ss[15:8] <= #Tp wb_dat_i[15:8];
+          ss[15:8] <= wb_dat_i[15:8];
         if (wb_sel_i[2])
-          ss[`SPI_SS_NB-1:16] <= #Tp wb_dat_i[`SPI_SS_NB-1:16];
+          ss[`SPI_SS_NB-1:16] <= wb_dat_i[`SPI_SS_NB-1:16];
       `endif
       `ifdef SPI_SS_NB_32
         if (wb_sel_i[0])
-          ss[7:0] <= #Tp wb_dat_i[7:0];
+          ss[7:0] <= wb_dat_i[7:0];
         if (wb_sel_i[1])
-          ss[15:8] <= #Tp wb_dat_i[15:8];
+          ss[15:8] <= wb_dat_i[15:8];
         if (wb_sel_i[2])
-          ss[23:16] <= #Tp wb_dat_i[23:16];
+          ss[23:16] <= wb_dat_i[23:16];
         if (wb_sel_i[3])
-          ss[`SPI_SS_NB-1:24] <= #Tp wb_dat_i[`SPI_SS_NB-1:24];
+          ss[`SPI_SS_NB-1:24] <= wb_dat_i[`SPI_SS_NB-1:24];
       `endif
       end
   end
diff --git a/fpga/usrp2/opencores/spi/rtl/verilog/spi_top16.v b/fpga/usrp2/opencores/spi/rtl/verilog/spi_top16.v
new file mode 100644
index 000000000..ee808a8ab
--- /dev/null
+++ b/fpga/usrp2/opencores/spi/rtl/verilog/spi_top16.v
@@ -0,0 +1,182 @@
+
+// Modified 2010 by Matt Ettus to remove old verilog style and
+// allow 16-bit operation
+
+//////////////////////////////////////////////////////////////////////
+////                                                              ////
+////  spi_top.v                                                   ////
+////                                                              ////
+////  This file is part of the SPI IP core project                ////
+////  http://www.opencores.org/projects/spi/                      ////
+////                                                              ////
+////  Author(s):                                                  ////
+////      - Simon Srot (simons@opencores.org)                     ////
+////                                                              ////
+////  All additional information is avaliable in the Readme.txt   ////
+////  file.                                                       ////
+////                                                              ////
+//////////////////////////////////////////////////////////////////////
+////                                                              ////
+//// Copyright (C) 2002 Authors                                   ////
+////                                                              ////
+//// This source file may be used and distributed without         ////
+//// restriction provided that this copyright statement is not    ////
+//// removed from the file and that any derivative work contains  ////
+//// the original copyright notice and the associated disclaimer. ////
+////                                                              ////
+//// This source file is free software; you can redistribute it   ////
+//// and/or modify it under the terms of the GNU Lesser General   ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any   ////
+//// later version.                                               ////
+////                                                              ////
+//// This source is distributed in the hope that it will be       ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
+//// PURPOSE.  See the GNU Lesser General Public License for more ////
+//// details.                                                     ////
+////                                                              ////
+//// You should have received a copy of the GNU Lesser General    ////
+//// Public License along with this source; if not, download it   ////
+//// from http://www.opencores.org/lgpl.shtml                     ////
+////                                                              ////
+//////////////////////////////////////////////////////////////////////
+
+
+`include "spi_defines.v"
+
+module spi_top16
+  (input wb_clk_i, input wb_rst_i, 
+   input [4:0] wb_adr_i, 
+   input [15:0] wb_dat_i, 
+   output reg [15:0] wb_dat_o, 
+   input [1:0] wb_sel_i,
+   input wb_we_i, input wb_stb_i, input wb_cyc_i, 
+   output reg wb_ack_o, output wb_err_o, output reg wb_int_o,
+   
+   // SPI signals
+   output [15:0] ss_pad_o, output sclk_pad_o, output mosi_pad_o, input miso_pad_i);
+   
+   // Internal signals
+   reg [15:0] divider;          // Divider register
+   reg [`SPI_CTRL_BIT_NB-1:0] ctrl;             // Control and status register
+   reg [15:0] 		      ss;               // Slave select register
+   reg [31:0] 		      wb_dat;           // wb data out
+   wire [31:0] 		      rx;               // Rx register
+   wire 		      rx_negedge;       // miso is sampled on negative edge
+   wire 		      tx_negedge;       // mosi is driven on negative edge
+   wire [`SPI_CHAR_LEN_BITS-1:0] char_len;         // char len
+   wire 			 go;               // go
+   wire 			 lsb;              // lsb first on line
+   wire 			 ie;               // interrupt enable
+   wire 			 ass;              // automatic slave select
+   wire 			 spi_divider_sel;  // divider register select
+   wire 			 spi_ctrl_sel;     // ctrl register select
+   wire [3:0] 			 spi_tx_sel;       // tx_l register select
+   wire 			 spi_ss_sel;       // ss register select
+   wire 			 tip;              // transfer in progress
+   wire 			 pos_edge;         // recognize posedge of sclk
+   wire 			 neg_edge;         // recognize negedge of sclk
+   wire 			 last_bit;         // marks last character bit
+   
+   // Address decoder
+   assign spi_divider_sel = wb_cyc_i & wb_stb_i & (wb_adr_i[4:2] == `SPI_DIVIDE);
+   assign spi_ctrl_sel    = wb_cyc_i & wb_stb_i & (wb_adr_i[4:2] == `SPI_CTRL);
+   assign spi_tx_sel[0]   = wb_cyc_i & wb_stb_i & (wb_adr_i[4:2] == `SPI_TX_0);
+   assign spi_tx_sel[1]   = wb_cyc_i & wb_stb_i & (wb_adr_i[4:2] == `SPI_TX_1);
+   assign spi_tx_sel[2]   = wb_cyc_i & wb_stb_i & (wb_adr_i[4:2] == `SPI_TX_2);
+   assign spi_tx_sel[3]   = wb_cyc_i & wb_stb_i & (wb_adr_i[4:2] == `SPI_TX_3);
+   assign spi_ss_sel      = wb_cyc_i & wb_stb_i & (wb_adr_i[4:2] == `SPI_SS);
+   
+   always @(wb_adr_i or rx or ctrl or divider or ss)
+     case (wb_adr_i[4:2])   
+       `SPI_RX_0:    wb_dat = rx[31:0];
+       `SPI_CTRL:    wb_dat = {{32-`SPI_CTRL_BIT_NB{1'b0}}, ctrl};
+       `SPI_DIVIDE:  wb_dat = {16'b0, divider};
+       `SPI_SS:      wb_dat = {16'b0, ss};
+       default : wb_dat = 32'd0;
+     endcase // case (wb_adr_i[4:2])
+   
+   always @(posedge wb_clk_i)
+     if (wb_rst_i)
+       wb_dat_o <= 32'b0;
+     else
+       wb_dat_o <= wb_adr_i[1] ? wb_dat[31:16] : wb_dat[15:0];
+   
+   always @(posedge wb_clk_i)
+     if (wb_rst_i)
+       wb_ack_o <= 1'b0;
+     else
+       wb_ack_o <= wb_cyc_i & wb_stb_i & ~wb_ack_o;
+   
+   assign wb_err_o = 1'b0;
+   
+   // Interrupt
+   always @(posedge wb_clk_i)
+     if (wb_rst_i)
+       wb_int_o <= 1'b0;
+     else if (ie && tip && last_bit && pos_edge)
+       wb_int_o <= 1'b1;
+     else if (wb_ack_o)
+       wb_int_o <= 1'b0;
+   
+   // Divider register
+   always @(posedge wb_clk_i)
+     if (wb_rst_i)
+       divider <= 16'b0;
+     else if (spi_divider_sel && wb_we_i && !tip && ~wb_adr_i[1])
+       divider <= wb_dat_i;
+   
+   // Ctrl register
+   always @(posedge wb_clk_i)
+     if (wb_rst_i)
+       ctrl <= {`SPI_CTRL_BIT_NB{1'b0}};
+     else if(spi_ctrl_sel && wb_we_i && !tip && ~wb_adr_i[1])
+       begin
+          if (wb_sel_i[0])
+            ctrl[7:0] <= wb_dat_i[7:0] | {7'b0, ctrl[0]};
+          if (wb_sel_i[1])
+            ctrl[`SPI_CTRL_BIT_NB-1:8] <= wb_dat_i[`SPI_CTRL_BIT_NB-1:8];
+       end
+     else if(tip && last_bit && pos_edge)
+       ctrl[`SPI_CTRL_GO] <= 1'b0;
+   
+   assign rx_negedge = ctrl[`SPI_CTRL_RX_NEGEDGE];
+   assign tx_negedge = ctrl[`SPI_CTRL_TX_NEGEDGE];
+   assign go         = ctrl[`SPI_CTRL_GO];
+   assign char_len   = ctrl[`SPI_CTRL_CHAR_LEN];
+   assign lsb        = ctrl[`SPI_CTRL_LSB];
+   assign ie         = ctrl[`SPI_CTRL_IE];
+   assign ass        = ctrl[`SPI_CTRL_ASS];
+   
+   // Slave select register
+   always @(posedge wb_clk_i)
+     if (wb_rst_i)
+       ss <= 16'b0;
+     else if(spi_ss_sel && wb_we_i && !tip & ~wb_adr_i[1])
+       begin
+          if (wb_sel_i[0])
+            ss[7:0] <= wb_dat_i[7:0];
+          if (wb_sel_i[1])
+            ss[15:8] <= wb_dat_i[15:8];
+       end
+   
+   assign ss_pad_o = ~((ss & {16{tip & ass}}) | (ss & {16{!ass}}));
+   
+   spi_clgen clgen (.clk_in(wb_clk_i), .rst(wb_rst_i), .go(go), .enable(tip), .last_clk(last_bit),
+                    .divider(divider[`SPI_DIVIDER_LEN-1:0]), .clk_out(sclk_pad_o), .pos_edge(pos_edge), 
+                    .neg_edge(neg_edge));
+
+   wire [3:0] new_sels = { (wb_adr_i[1] & wb_sel_i[1]), (wb_adr_i[1] & wb_sel_i[0]), 
+			   (~wb_adr_i[1] & wb_sel_i[1]), (~wb_adr_i[1] & wb_sel_i[0]) };
+   
+   
+   spi_shift shift (.clk(wb_clk_i), .rst(wb_rst_i), .len(char_len[`SPI_CHAR_LEN_BITS-1:0]),
+                    .latch(spi_tx_sel[3:0] & {4{wb_we_i}}), .byte_sel(new_sels), .lsb(lsb), 
+                    .go(go), .pos_edge(pos_edge), .neg_edge(neg_edge), 
+                    .rx_negedge(rx_negedge), .tx_negedge(tx_negedge),
+                    .tip(tip), .last(last_bit), 
+                    .p_in({wb_dat_i,wb_dat_i}), .p_out(rx), 
+                    .s_clk(sclk_pad_o), .s_in(miso_pad_i), .s_out(mosi_pad_o));
+
+endmodule // spi_top16
diff --git a/fpga/usrp2/opencores/spi/rtl/verilog/timescale.v b/fpga/usrp2/opencores/spi/rtl/verilog/timescale.v
deleted file mode 100644
index 60d4ecbd1..000000000
--- a/fpga/usrp2/opencores/spi/rtl/verilog/timescale.v
+++ /dev/null
@@ -1,2 +0,0 @@
-`timescale 1ns / 10ps
-