usrp1: pulled in cmake build system for usrp1 firmware

1 files changed, 389 insertions, 0 deletions

diff --git a/firmware/fx2/usrp1/usrp_main.c b/firmware/fx2/usrp1/usrp_main.c
new file mode 100644
index 000000000..3eb8c001f
--- /dev/null
+++ b/firmware/fx2/usrp1/usrp_main.c
@@ -0,0 +1,389 @@
+/* 
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003,2004 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+#include "usrp_common.h"
+#include "usrp_regs.h"
+#include "usrp_commands.h"
+#include "fpga.h"
+#include "usrp_gpif_inline.h"
+#include "timer.h"
+#include "i2c.h"
+#include "isr.h"
+#include "usb_common.h"
+#include "fx2utils.h"
+#include "usrp_globals.h"
+#include "usrp_i2c_addr.h"
+#include <string.h>
+#include "spi.h"
+#include "eeprom_io.h"
+#include "usb_descriptors.h"
+
+/*
+ * offsets into boot eeprom for configuration values
+ */
+#define	HW_REV_OFFSET		  5
+#define SERIAL_NO_OFFSET	248
+#define SERIAL_NO_LEN		  8
+
+
+#define	bRequestType	SETUPDAT[0]
+#define	bRequest	SETUPDAT[1]
+#define	wValueL		SETUPDAT[2]
+#define	wValueH		SETUPDAT[3]
+#define	wIndexL		SETUPDAT[4]
+#define	wIndexH		SETUPDAT[5]
+#define	wLengthL	SETUPDAT[6]
+#define	wLengthH	SETUPDAT[7]
+
+
+unsigned char g_tx_enable = 0;
+unsigned char g_rx_enable = 0;
+unsigned char g_rx_overrun = 0;
+unsigned char g_tx_underrun = 0;
+
+/*
+ * the host side fpga loader code pushes an MD5 hash of the bitstream
+ * into hash1.
+ */
+#define	  USRP_HASH_SIZE      16
+xdata at USRP_HASH_SLOT_1_ADDR unsigned char hash1[USRP_HASH_SIZE];
+
+static void
+get_ep0_data (void)
+{
+  EP0BCL = 0;			// arm EP0 for OUT xfer.  This sets the busy bit
+
+  while (EP0CS & bmEPBUSY)	// wait for busy to clear
+    ;
+}
+
+/*
+ * Handle our "Vendor Extension" commands on endpoint 0.
+ * If we handle this one, return non-zero.
+ */
+unsigned char
+app_vendor_cmd (void)
+{
+  if (bRequestType == VRT_VENDOR_IN){
+
+    /////////////////////////////////
+    //    handle the IN requests
+    /////////////////////////////////
+
+    switch (bRequest){
+
+    case VRQ_GET_STATUS:
+      switch (wIndexL){
+
+      case GS_TX_UNDERRUN:
+	EP0BUF[0] = g_tx_underrun;
+	g_tx_underrun = 0;
+	EP0BCH = 0;
+	EP0BCL = 1;
+	break;
+
+      case GS_RX_OVERRUN:
+	EP0BUF[0] = g_rx_overrun;
+	g_rx_overrun = 0;
+	EP0BCH = 0;
+	EP0BCL = 1;
+	break;
+
+      default:
+	return 0;
+      }
+      break;
+
+    case VRQ_I2C_READ:
+      if (!i2c_read (wValueL, EP0BUF, wLengthL))
+	return 0;
+
+      EP0BCH = 0;
+      EP0BCL = wLengthL;
+      break;
+
+    case VRQ_SPI_READ:
+      if (!spi_read (wValueH, wValueL, wIndexH, wIndexL, EP0BUF, wLengthL))
+	return 0;
+
+      EP0BCH = 0;
+      EP0BCL = wLengthL;
+      break;
+
+    case VRQ_SPI_TRANSACT:
+      if (!spi_transact (wValueH, wValueL, wIndexH, wIndexL, wLengthH, EP0BUF, wLengthL))
+	return 0;
+
+      EP0BCH = 0;
+      EP0BCL = wLengthL;
+      break;
+
+    default:
+      return 0;
+    }
+  }
+
+  else if (bRequestType == VRT_VENDOR_OUT){
+
+    /////////////////////////////////
+    //    handle the OUT requests
+    /////////////////////////////////
+
+    switch (bRequest){
+
+    case VRQ_SET_LED:
+      switch (wIndexL){
+      case 0:
+	set_led_0 (wValueL);
+	break;
+	
+      case 1:
+	set_led_1 (wValueL);
+	break;
+	
+      default:
+	return 0;
+      }
+      break;
+      
+    case VRQ_FPGA_LOAD:
+      switch (wIndexL){			// sub-command
+      case FL_BEGIN:
+	return fpga_load_begin ();
+	
+      case FL_XFER:
+	get_ep0_data ();
+	return fpga_load_xfer (EP0BUF, EP0BCL);
+	
+      case FL_END:
+	return fpga_load_end ();
+	
+      default:
+	return 0;
+      }
+      break;
+      
+
+    case VRQ_FPGA_SET_RESET:
+      fpga_set_reset (wValueL);
+      break;
+      
+    case VRQ_FPGA_SET_TX_ENABLE:
+      fpga_set_tx_enable (wValueL);
+      break;
+      
+    case VRQ_FPGA_SET_RX_ENABLE:
+      fpga_set_rx_enable (wValueL);
+      break;
+
+    case VRQ_FPGA_SET_TX_RESET:
+      fpga_set_tx_reset (wValueL);
+      break;
+      
+    case VRQ_FPGA_SET_RX_RESET:
+      fpga_set_rx_reset (wValueL);
+      break;
+
+    case VRQ_I2C_WRITE:
+      get_ep0_data ();
+      if (!i2c_write (wValueL, EP0BUF, EP0BCL))
+	return 0;
+      break;
+
+    case VRQ_SPI_WRITE:
+      get_ep0_data ();
+      if (!spi_write (wValueH, wValueL, wIndexH, wIndexL, EP0BUF, EP0BCL))
+	return 0;
+      break;
+
+    default:
+      return 0;
+    }
+
+  }
+  else
+    return 0;    // invalid bRequestType
+
+  return 1;
+}
+
+
+
+static void
+main_loop (void)
+{
+  setup_flowstate_common ();
+
+  while (1){
+
+    if (usb_setup_packet_avail ())
+      usb_handle_setup_packet ();
+    
+  
+    if (GPIFTRIG & bmGPIF_IDLE){
+
+      // OK, GPIF is idle.  Let's try to give it some work.
+
+      // First check for underruns and overruns
+
+      if (UC_BOARD_HAS_FPGA && (USRP_PA & (bmPA_TX_UNDERRUN | bmPA_RX_OVERRUN))){
+      
+	// record the under/over run
+	if (USRP_PA & bmPA_TX_UNDERRUN)
+	  g_tx_underrun = 1;
+
+	if (USRP_PA & bmPA_RX_OVERRUN)
+	  g_rx_overrun = 1;
+
+	// tell the FPGA to clear the flags
+	fpga_clear_flags ();
+      }
+
+      // Next see if there are any "OUT" packets waiting for our attention,
+      // and if so, if there's room in the FPGA's FIFO for them.
+
+      if (g_tx_enable && !(EP24FIFOFLGS & 0x02)){  // USB end point fifo is not empty...
+
+	if (fpga_has_room_for_packet ()){	   // ... and FPGA has room for packet
+
+	  GPIFTCB1 = 0x01;	SYNCDELAY;
+	  GPIFTCB0 = 0x00;	SYNCDELAY;
+
+	  setup_flowstate_write ();
+
+	  SYNCDELAY;
+	  GPIFTRIG = bmGPIF_EP2_START | bmGPIF_WRITE; 	// start the xfer
+	  SYNCDELAY;
+
+	  while (!(GPIFTRIG & bmGPIF_IDLE)){
+	    // wait for the transaction to complete
+	  }
+	}
+      }
+
+      // See if there are any requests for "IN" packets, and if so
+      // whether the FPGA's got any packets for us.
+
+      if (g_rx_enable && !(EP6CS & bmEPFULL)){	// USB end point fifo is not full...
+
+	if (fpga_has_packet_avail ()){		// ... and FPGA has packet available
+
+	  GPIFTCB1 = 0x01;	SYNCDELAY;
+	  GPIFTCB0 = 0x00;	SYNCDELAY;
+
+	  setup_flowstate_read ();
+
+	  SYNCDELAY;
+	  GPIFTRIG = bmGPIF_EP6_START | bmGPIF_READ; 	// start the xfer
+	  SYNCDELAY;
+
+	  while (!(GPIFTRIG & bmGPIF_IDLE)){
+	    // wait for the transaction to complete
+	  }
+
+	  SYNCDELAY;
+	  INPKTEND = 6;	// tell USB we filled buffer (6 is our endpoint num)
+	}
+      }
+    }
+  }
+}
+
+
+/*
+ * called at 100 Hz from timer2 interrupt
+ *
+ * Toggle led 0
+ */
+void
+isr_tick (void) interrupt
+{
+  static unsigned char	count = 1;
+  
+  if (--count == 0){
+    count = 50;
+    USRP_LED_REG ^= bmLED0;
+  }
+
+  clear_timer_irq ();
+}
+
+/*
+ * Read h/w rev code and serial number out of boot eeprom and
+ * patch the usb descriptors with the values.
+ */
+void
+patch_usb_descriptors(void)
+{
+  static xdata unsigned char hw_rev;
+  static xdata unsigned char serial_no[8];
+  unsigned char i;
+
+  eeprom_read(I2C_ADDR_BOOT, HW_REV_OFFSET, &hw_rev, 1);	// LSB of device id
+  usb_desc_hw_rev_binary_patch_location_0[0] = hw_rev;
+  usb_desc_hw_rev_binary_patch_location_1[0] = hw_rev;
+  usb_desc_hw_rev_ascii_patch_location_0[0] = hw_rev + '0';     // FIXME if we get > 9
+
+  eeprom_read(I2C_ADDR_BOOT, SERIAL_NO_OFFSET, serial_no, SERIAL_NO_LEN);
+
+  for (i = 0; i < SERIAL_NO_LEN; i++){
+    unsigned char ch = serial_no[i];
+    if (ch == 0xff)	// make unprogrammed EEPROM default to '0'
+      ch = '0';
+    usb_desc_serial_number_ascii[i << 1] = ch;
+  }
+}
+
+void
+main (void)
+{
+#if 0
+  g_rx_enable = 0;	// FIXME (work around initialization bug)
+  g_tx_enable = 0;
+  g_rx_overrun = 0;
+  g_tx_underrun = 0;
+#endif
+
+  memset (hash1, 0, USRP_HASH_SIZE);	// zero fpga bitstream hash.  This forces reload
+  
+  init_usrp ();
+  init_gpif ();
+  
+  // if (UC_START_WITH_GSTATE_OUTPUT_ENABLED)
+  IFCONFIG |= bmGSTATE;			// no conflict, start with it on
+
+  set_led_0 (0);
+  set_led_1 (0);
+  
+  EA = 0;		// disable all interrupts
+
+  patch_usb_descriptors();
+
+  setup_autovectors ();
+  usb_install_handlers ();
+  hook_timer_tick ((unsigned short) isr_tick);
+
+  EIEX4 = 1;		// disable INT4 FIXME
+  EA = 1;		// global interrupt enable
+
+  fx2_renumerate ();	// simulates disconnect / reconnect
+
+  main_loop ();
+}