usrp1: pulled in cmake build system for usrp1 firmware

15 files changed, 2263 insertions, 0 deletions

diff --git a/firmware/fx2/usrp1/CMakeLists.txt b/firmware/fx2/usrp1/CMakeLists.txt
new file mode 100644
index 000000000..3d99a2ac1
--- /dev/null
+++ b/firmware/fx2/usrp1/CMakeLists.txt
@@ -0,0 +1,84 @@
+#
+# Copyright 2010 Ettus Research LLC
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+include_directories(${CMAKE_SOURCE_DIR}/common)
+
+#for usrp_common.h and the regs files...
+set(CMAKE_INCLUDE_CURRENT_DIR ON)
+
+#now make a lib to link against
+set(libusrp1_sources 
+    ${CMAKE_SOURCE_DIR}/common/delay.c
+    ${CMAKE_SOURCE_DIR}/common/fx2utils.c
+    ${CMAKE_SOURCE_DIR}/common/i2c.c
+    ${CMAKE_SOURCE_DIR}/common/init_gpif.c
+    ${CMAKE_SOURCE_DIR}/common/isr.c
+    ${CMAKE_SOURCE_DIR}/common/timer.c
+    ${CMAKE_SOURCE_DIR}/common/usb_common.c
+#    ${CMAKE_SOURCE_DIR}/common/spi.c
+#    ${CMAKE_SOURCE_DIR}/common/vectors.a51
+)
+
+#file(GLOB libusrp1_c_sources ${CMAKE_SOURCE_DIR}/common/*.c)
+#file(GLOB libusrp1_a51_sources ${CMAKE_SOURCE_DIR}/common/*.a51)
+#list(APPEND libusrp1_sources ${libusrp1_c_sources} ${libusrp1_a51_sources})
+
+add_library(libusrp1 STATIC ${libusrp1_sources})
+
+# edit-gpif hacks up gpif.c for our purposes. no major surgery, just moving stuff around.
+set(GPIF_SOURCE ${CMAKE_CURRENT_SOURCE_DIR}/gpif.c)
+set(GPIF_SOURCE_OUTPUT ${CMAKE_CURRENT_SOURCE_DIR}/usrp_gpif.c)
+set(GPIF_HEADER_OUTPUT ${CMAKE_CURRENT_SOURCE_DIR}/usrp_gpif_inline.h)
+
+add_custom_command(
+        OUTPUT ${GPIF_SOURCE_OUTPUT}
+        DEPENDS ${EDIT_GPIF_USRP1}
+        COMMAND ${PYTHON_EXECUTABLE} ${EDIT_GPIF_USRP1} ${GPIF_SOURCE} ${GPIF_SOURCE_OUTPUT} ${GPIF_HEADER_OUTPUT}
+        COMMENT "Generating ${GPIF_SOURCE_OUTPUT}"
+)
+
+#file(GLOB usrp1_sources *.c)
+set(usrp1_sources 
+    ${CMAKE_SOURCE_DIR}/common/vectors.a51
+    board_specific.c 
+    eeprom_io.c 
+    fpga_load.c 
+    fpga_rev2.c 
+    usrp_common.c 
+    usrp_gpif.c 
+    usrp_main.c 
+    usb_descriptors.a51 
+    ${CMAKE_SOURCE_DIR}/common/spi.c
+    ${CMAKE_SOURCE_DIR}/common/_startup.a51
+)
+add_executable(usrp1_fw ${usrp1_sources})
+target_link_libraries(usrp1_fw libusrp1)
+
+set(eeprom1_sources
+    ${CMAKE_SOURCE_DIR}/common/eeprom_boot.a51
+    ${CMAKE_SOURCE_DIR}/common/eeprom_init.c
+    ${CMAKE_SOURCE_DIR}/common/_startup.a51
+)
+
+add_custom_target(usrp1_eeprom ALL
+    DEPENDS usrp1_boot
+    COMMAND objcopy -I ihex -O binary usrp1_boot.ihx usrp1_boot.bin
+    COMMAND ${PYTHON_EXECUTABLE} ${BUILD_EEPROM} -r2 usrp1_boot.bin usrp1_eeprom.bin
+)
+
+add_executable(usrp1_boot ${eeprom1_sources})
+target_link_libraries(usrp1_boot libusrp1)
diff --git a/firmware/fx2/usrp1/board_specific.c b/firmware/fx2/usrp1/board_specific.c
new file mode 100644
index 000000000..ef0081d84
--- /dev/null
+++ b/firmware/fx2/usrp1/board_specific.c
@@ -0,0 +1,113 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2004 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "usrp_common.h"
+#include "spi.h"
+
+void
+set_led_0 (unsigned char on)
+{
+  if (!on)			// active low
+    USRP_PC |= bmPC_LED0;
+  else
+    USRP_PC &= ~bmPC_LED0;
+}
+
+void 
+set_led_1 (unsigned char on)
+{
+  if (!on)			// active low
+    USRP_PC |= bmPC_LED1;
+  else
+    USRP_PC &= ~bmPC_LED1;
+}
+
+void
+toggle_led_0 (void)
+{
+  USRP_PC ^= bmPC_LED0;
+}
+
+void
+toggle_led_1 (void)
+{
+  USRP_PC ^= bmPC_LED1;
+}
+
+void
+la_trace_init (void)
+{
+}
+
+void
+set_sleep_bits (unsigned char bits, unsigned char mask)
+{
+  // NOP on usrp1
+}
+
+static xdata unsigned char xbuf[1];
+
+void
+write_9862 (unsigned char which, unsigned char regno, unsigned char value)
+{
+  xbuf[0] = value;
+  
+  spi_write (0, regno & 0x3f,
+	     which == 0 ? SPI_ENABLE_CODEC_A : SPI_ENABLE_CODEC_B,
+	     SPI_FMT_MSB | SPI_FMT_HDR_1,
+	     xbuf, 1);
+}
+
+void
+write_both_9862s (unsigned char regno, unsigned char value)
+{
+  xbuf[0] = value;
+  
+  spi_write (0, regno & 0x3f,
+	     SPI_ENABLE_CODEC_A | SPI_ENABLE_CODEC_B,
+	     SPI_FMT_MSB | SPI_FMT_HDR_1,
+	     xbuf, 1);
+}
+
+#define REG_RX_PWR_DN		 1
+#define	REG_TX_PWR_DN		 8
+#define	REG_TX_MODULATOR	20
+
+static void
+power_down_9862s (void)
+{
+  write_both_9862s (REG_RX_PWR_DN,    0x01);
+  write_both_9862s (REG_TX_PWR_DN,    0x0f);	// pwr dn digital and analog_both
+  write_both_9862s (REG_TX_MODULATOR, 0x00);	// coarse & fine modulators disabled
+}
+
+void
+init_board (void)
+{
+  la_trace_init ();
+  init_spi ();
+
+  USRP_PC &= ~bmPC_nRESET;	// active low reset
+  USRP_PC |= bmPC_nRESET;
+
+  power_down_9862s ();
+}
diff --git a/firmware/fx2/usrp1/eeprom_io.c b/firmware/fx2/usrp1/eeprom_io.c
new file mode 100644
index 000000000..9eeb53636
--- /dev/null
+++ b/firmware/fx2/usrp1/eeprom_io.c
@@ -0,0 +1,65 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2006 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "eeprom_io.h"
+#include "i2c.h"
+#include "delay.h"
+
+// returns non-zero if successful, else 0
+unsigned char
+eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
+	     xdata unsigned char *buf, unsigned char len)
+{
+  // We setup a random read by first doing a "zero byte write".
+  // Writes carry an address.  Reads use an implicit address.
+
+  static xdata unsigned char cmd[1];
+  cmd[0] = eeprom_offset;
+  if (!i2c_write(i2c_addr, cmd, 1))
+    return 0;
+
+  return i2c_read(i2c_addr, buf, len);
+}
+
+
+#if 0
+
+// returns non-zero if successful, else 0
+unsigned char
+eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset,
+	      const xdata unsigned char *buf, unsigned char len)
+{
+  static xdata unsigned char cmd[2];
+  unsigned char ok;
+
+  while (len-- > 0){
+    cmd[0] = eeprom_offset++;
+    cmd[1] = *buf++;
+    ok = i2c_write(i2c_addr, cmd, 2);
+    mdelay(10);		// delay 10ms worst case write time
+    if (!ok)
+      return 0;
+  }
+  return 1;
+}
+
+#endif
diff --git a/firmware/fx2/usrp1/eeprom_io.h b/firmware/fx2/usrp1/eeprom_io.h
new file mode 100644
index 000000000..558017b12
--- /dev/null
+++ b/firmware/fx2/usrp1/eeprom_io.h
@@ -0,0 +1,38 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2006 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef INCLUDED_EEPROM_IO_H
+#define INCLUDED_EEPROM_IO_H
+
+
+// returns non-zero if successful, else 0
+unsigned char
+eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
+	     xdata unsigned char *buf, unsigned char len);
+
+// returns non-zero if successful, else 0
+unsigned char
+eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset,
+	      const xdata unsigned char *buf, unsigned char len);
+
+
+#endif /* INCLUDED_EEPROM_IO_H */
diff --git a/firmware/fx2/usrp1/fpga_load.c b/firmware/fx2/usrp1/fpga_load.c
new file mode 100644
index 000000000..c3ae9e707
--- /dev/null
+++ b/firmware/fx2/usrp1/fpga_load.c
@@ -0,0 +1,193 @@
+/* 
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+#include "usrp_common.h"
+#include "fpga_load.h"
+#include "delay.h"
+
+/*
+ * setup altera FPGA serial load (PS).
+ *
+ * On entry:
+ *	don't care
+ *
+ * On exit:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ */
+unsigned char
+fpga_load_begin (void)
+{
+  USRP_ALTERA_CONFIG &= ~bmALTERA_BITS;		// clear all bits (NCONFIG low)
+  udelay (40);					// wait 40 us
+  USRP_ALTERA_CONFIG |= bmALTERA_NCONFIG;	// set NCONFIG high
+
+  if (UC_BOARD_HAS_FPGA){
+    // FIXME should really cap this loop with a counter so we
+    //   don't hang forever on a hardware failure.
+    while ((USRP_ALTERA_CONFIG & bmALTERA_NSTATUS) == 0) // wait for NSTATUS to go high
+      ;
+  }
+
+  // ready to xfer now
+
+  return 1;
+}
+
+/*
+ * clock out the low bit of bits.
+ *
+ * On entry:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ *
+ * On exit:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ */
+
+
+#if 0
+
+static void
+clock_out_config_byte (unsigned char bits)
+{
+  unsigned char i;
+
+  // clock out configuration byte, least significant bit first
+
+  for (i = 0; i < 8; i++){
+
+    USRP_ALTERA_CONFIG = ((USRP_ALTERA_CONFIG & ~bmALTERA_DATA0) | ((bits & 1) ? bmALTERA_DATA0 : 0));
+    USRP_ALTERA_CONFIG |= bmALTERA_DCLK;		/* set DCLK to 1 */
+    USRP_ALTERA_CONFIG &= ~bmALTERA_DCLK;		/* set DCLK to 0 */
+
+    bits = bits >> 1;
+  }
+}
+	
+#else
+
+static void 
+clock_out_config_byte (unsigned char bits) _naked
+{
+    _asm
+	mov	a, dpl
+	
+	rrc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rrc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rrc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rrc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rrc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rrc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rrc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rrc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	ret	
+
+    _endasm;
+}
+
+#endif
+
+static void
+clock_out_bytes (unsigned char bytecount,
+		 unsigned char xdata *p)
+{
+  while (bytecount-- > 0)
+    clock_out_config_byte (*p++);
+}
+
+/*
+ * Transfer block of bytes from packet to FPGA serial configuration port
+ *
+ * On entry:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ *
+ * On exit:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ */
+unsigned char
+fpga_load_xfer (xdata unsigned char *p, unsigned char bytecount)
+{
+  clock_out_bytes (bytecount, p);
+  return 1;
+}
+
+/*
+ * check for successful load...
+ */
+unsigned char
+fpga_load_end (void)
+{
+  unsigned char status = USRP_ALTERA_CONFIG;
+
+  if (!UC_BOARD_HAS_FPGA)			// always true if we don't have FPGA
+    return 1;
+
+  if ((status & bmALTERA_NSTATUS) == 0)		// failed to program
+    return 0;
+
+  if ((status & bmALTERA_CONF_DONE) == bmALTERA_CONF_DONE)
+    return 1;					// everything's cool
+
+  // I don't think this should happen.  It indicates that
+  // programming is still in progress.
+
+  return 0;
+}
diff --git a/firmware/fx2/usrp1/fpga_rev2.c b/firmware/fx2/usrp1/fpga_rev2.c
new file mode 100644
index 000000000..cca961dc4
--- /dev/null
+++ b/firmware/fx2/usrp1/fpga_rev2.c
@@ -0,0 +1,122 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2004 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "fpga.h"
+#include "fpga_regs_common.h"
+#include "usrp_common.h"
+#include "usrp_globals.h"
+#include "spi.h"
+
+unsigned char g_tx_reset = 0;
+unsigned char g_rx_reset = 0;
+
+void
+fpga_write_reg (unsigned char regno, const xdata unsigned char *regval)
+{
+  spi_write (0, 0x00 | (regno & 0x7f),
+	     SPI_ENABLE_FPGA,
+	     SPI_FMT_MSB | SPI_FMT_HDR_1,
+	     regval, 4);
+}
+
+
+static xdata unsigned char regval[4] = {0, 0, 0, 0};
+
+static void
+write_fpga_master_ctrl (void)
+{
+  unsigned char v = 0;
+  if (g_tx_enable)
+    v |= bmFR_MC_ENABLE_TX;
+  if (g_rx_enable)
+    v |= bmFR_MC_ENABLE_RX;
+  if (g_tx_reset)
+    v |= bmFR_MC_RESET_TX;
+  if (g_rx_reset)
+    v |= bmFR_MC_RESET_RX;
+  regval[3] = v;
+
+  fpga_write_reg (FR_MASTER_CTRL, regval);
+}
+
+// Resets both AD9862's and the FPGA serial bus interface.
+
+void
+fpga_set_reset (unsigned char on)
+{
+  on &= 0x1;
+
+  if (on){
+    USRP_PC &= ~bmPC_nRESET;		// active low
+    g_tx_enable = 0;
+    g_rx_enable = 0;
+    g_tx_reset = 0;
+    g_rx_reset = 0;
+  }
+  else
+    USRP_PC |= bmPC_nRESET;
+}
+
+void
+fpga_set_tx_enable (unsigned char on)
+{
+  on &= 0x1;
+  g_tx_enable = on;
+
+  write_fpga_master_ctrl ();
+
+  if (on){
+    g_tx_underrun = 0;
+    fpga_clear_flags ();
+  }
+}
+
+void
+fpga_set_rx_enable (unsigned char on)
+{
+  on &= 0x1;
+  g_rx_enable = on;
+  
+  write_fpga_master_ctrl ();
+  if (on){
+    g_rx_overrun = 0;
+    fpga_clear_flags ();
+  }
+}
+
+void
+fpga_set_tx_reset (unsigned char on)
+{
+  on &= 0x1;
+  g_tx_reset = on;
+
+  write_fpga_master_ctrl ();
+}
+
+void
+fpga_set_rx_reset (unsigned char on)
+{
+  on &= 0x1;
+  g_rx_reset = on;
+  
+  write_fpga_master_ctrl ();
+}
diff --git a/firmware/fx2/usrp1/fpga_rev2.h b/firmware/fx2/usrp1/fpga_rev2.h
new file mode 100644
index 000000000..54ec3f9fa
--- /dev/null
+++ b/firmware/fx2/usrp1/fpga_rev2.h
@@ -0,0 +1,58 @@
+/* 
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003,2004 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+#ifndef INCLUDED_FPGA_REV1_H
+#define INCLUDED_FPGA_REV1_H
+
+void fpga_set_reset (unsigned char v);
+void fpga_set_tx_enable (unsigned char v);
+void fpga_set_rx_enable (unsigned char v);
+void fpga_set_tx_reset (unsigned char v);
+void fpga_set_rx_reset (unsigned char v);
+
+unsigned char fpga_has_room_for_packet (void);
+unsigned char fpga_has_packet_avail (void);
+
+#if (UC_BOARD_HAS_FPGA)
+/*
+ * return TRUE iff FPGA internal fifo has room for 512 bytes.
+ */
+#define fpga_has_room_for_packet()	(GPIFREADYSTAT & bmFPGA_HAS_SPACE)
+
+/*
+ * return TRUE iff FPGA internal fifo has at least 512 bytes available.
+ */
+#define fpga_has_packet_avail()		(GPIFREADYSTAT & bmFPGA_PKT_AVAIL)
+
+#else	/* no FPGA on board.  fake it. */
+
+#define fpga_has_room_for_packet()	TRUE
+#define	fpga_has_packet_avail()		TRUE
+
+#endif
+
+#define	fpga_clear_flags()				\
+	do {						\
+	  USRP_PE |= bmPE_FPGA_CLR_STATUS;		\
+	  USRP_PE &= ~bmPE_FPGA_CLR_STATUS;		\
+        } while (0)
+
+
+#endif /* INCLUDED_FPGA_REV1_H */
diff --git a/firmware/fx2/usrp1/gpif.c b/firmware/fx2/usrp1/gpif.c
new file mode 100644
index 000000000..f6745a43b
--- /dev/null
+++ b/firmware/fx2/usrp1/gpif.c
@@ -0,0 +1,292 @@
+// This program configures the General Programmable Interface (GPIF) for FX2.     
+// Please do not modify sections of text which are marked as "DO NOT EDIT ...". 
+//                                                                                
+// DO NOT EDIT ...                  
+// GPIF Initialization              
+// Interface Timing      Async        
+// Internal Ready Init   IntRdy=1     
+// CTL Out Tristate-able Binary       
+// SingleWrite WF Select     1     
+// SingleRead WF Select      0     
+// FifoWrite WF Select       3     
+// FifoRead WF Select        2     
+// Data Bus Idle Drive   Tristate     
+// END DO NOT EDIT                  
+                                    
+// DO NOT EDIT ...       
+// GPIF Wave Names       
+// Wave 0   = singlerd     
+// Wave 1   = singlewr     
+// Wave 2   = FIFORd       
+// Wave 3   = FIFOWr       
+                         
+// GPIF Ctrl Outputs   Level   
+// CTL 0    = WEN#     CMOS        
+// CTL 1    = REN#     CMOS        
+// CTL 2    = OE#      CMOS        
+// CTL 3    = CLRST    CMOS        
+// CTL 4    = unused   CMOS        
+// CTL 5    = BOGUS    CMOS        
+                               
+// GPIF Rdy Inputs         
+// RDY0     = EF#            
+// RDY1     = FF#            
+// RDY2     = unused         
+// RDY3     = unused         
+// RDY4     = unused         
+// RDY5     = TCXpire        
+// FIFOFlag = FIFOFlag       
+// IntReady = IntReady       
+// END DO NOT EDIT         
+// DO NOT EDIT ...                                                                         
+//                                                                                         
+// GPIF Waveform 0: singlerd                                                                
+//                                                                                         
+// Interval     0         1         2         3         4         5         6     Idle (7) 
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//                                                                                         
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
+// DataMode NO Data   NO Data   NO Data   NO Data   NO Data   NO Data   NO Data            
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
+// IF/Wait  Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
+//   Term A                                                                                
+//   LFunc                                                                                 
+//   Term B                                                                                
+// Branch1                                                                                 
+// Branch0                                                                                 
+// Re-Exec                                                                                 
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
+// WEN#         0         0         0         0         0         0         0         0    
+// REN#         0         0         0         0         0         0         0         0    
+// OE#          0         0         0         0         0         0         0         0    
+// CLRST        0         0         0         0         0         0         0         0    
+// unused       0         0         0         0         0         0         0         0    
+// BOGUS        0         0         0         0         0         0         0         0    
+//                     
+// END DO NOT EDIT     
+// DO NOT EDIT ...                                                                         
+//                                                                                         
+// GPIF Waveform 1: singlewr                                                                
+//                                                                                         
+// Interval     0         1         2         3         4         5         6     Idle (7) 
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//                                                                                         
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
+// DataMode Activate  Activate  Activate  Activate  Activate  Activate  Activate           
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
+// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
+//   Term A           EF#                                                                  
+//   LFunc            AND                                                                  
+//   Term B           EF#                                                                  
+// Branch1            ThenIdle                                                             
+// Branch0            ElseIdle                                                             
+// Re-Exec            No                                                                   
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
+// WEN#         0         1         1         1         1         1         1         0    
+// REN#         0         0         0         0         0         0         0         0    
+// OE#          0         0         0         0         0         0         0         0    
+// CLRST        0         0         0         0         0         0         0         0    
+// unused       0         0         0         0         0         0         0         0    
+// BOGUS        0         0         0         0         0         0         0         0    
+//                     
+// END DO NOT EDIT     
+// DO NOT EDIT ...                                                                         
+//                                                                                         
+// GPIF Waveform 2: FIFORd                                                                  
+//                                                                                         
+// Interval     0         1         2         3         4         5         6     Idle (7) 
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//                                                                                         
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
+// DataMode NO Data   Activate  NO Data   NO Data   NO Data   NO Data   NO Data            
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
+// IF/Wait  Wait 1    IF        Wait 1    IF        Wait 1    Wait 1    Wait 1             
+//   Term A           TCXpire             TCXpire                                          
+//   LFunc            AND                 AND                                              
+//   Term B           TCXpire             TCXpire                                          
+// Branch1            Then 2              ThenIdle                                         
+// Branch0            Else 1              ElseIdle                                         
+// Re-Exec            No                  No                                               
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
+// WEN#         0         0         0         0         0         0         0         0    
+// REN#         1         0         0         0         0         0         0         0    
+// OE#          1         1         1         0         0         0         0         0    
+// CLRST        0         0         0         0         0         0         0         0    
+// unused       0         0         0         0         0         0         0         0    
+// BOGUS        0         0         0         0         0         0         0         0    
+//                     
+// END DO NOT EDIT     
+// DO NOT EDIT ...                                                                         
+//                                                                                         
+// GPIF Waveform 3: FIFOWr                                                                  
+//                                                                                         
+// Interval     0         1         2         3         4         5         6     Idle (7) 
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//                                                                                         
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
+// DataMode NO Data   Activate  Activate  Activate  Activate  Activate  Activate           
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
+// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
+//   Term A           TCXpire                                                              
+//   LFunc            AND                                                                  
+//   Term B           TCXpire                                                              
+// Branch1            ThenIdle                                                             
+// Branch0            Else 1                                                               
+// Re-Exec            No                                                                   
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
+// WEN#         0         0         0         0         0         0         0         0    
+// REN#         0         0         0         0         0         0         0         0    
+// OE#          0         0         0         0         0         0         0         0    
+// CLRST        0         0         0         0         0         0         0         0    
+// unused       0         0         0         0         0         0         0         0    
+// BOGUS        0         0         0         0         0         0         0         0    
+//                     
+// END DO NOT EDIT     
+                                              
+// GPIF Program Code                          
+                                              
+// DO NOT EDIT ...                            
+#include "fx2.h"                            
+#include "fx2regs.h"                        
+#include "fx2sdly.h"     // SYNCDELAY macro 
+// END DO NOT EDIT                            
+                                              
+// DO NOT EDIT ...                     
+const char xdata WaveData[128] =     
+{                                      
+// Wave 0 
+/* LenBr */ 0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
+// Wave 1 
+/* LenBr */ 0x01,     0x3F,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x22,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
+/* Output*/ 0x00,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x00,
+/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
+// Wave 2 
+/* LenBr */ 0x01,     0x11,     0x01,     0x3F,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x00,     0x03,     0x00,     0x01,     0x00,     0x00,     0x00,     0x00,
+/* Output*/ 0x06,     0x04,     0x04,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* LFun  */ 0x00,     0x2D,     0x00,     0x2D,     0x00,     0x00,     0x00,     0x3F,
+// Wave 3 
+/* LenBr */ 0x01,     0x39,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x00,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
+/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* LFun  */ 0x00,     0x2D,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
+};                     
+// END DO NOT EDIT     
+                       
+// DO NOT EDIT ...                     
+const char xdata FlowStates[36] =   
+{                                      
+/* Wave 0 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/* Wave 1 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/* Wave 2 FlowStates */ 0x81,0x2D,0x26,0x00,0x04,0x04,0x03,0x02,0x00,
+/* Wave 3 FlowStates */ 0x81,0x2D,0x21,0x00,0x04,0x04,0x03,0x02,0x00,
+};                     
+// END DO NOT EDIT     
+                       
+// DO NOT EDIT ...                                               
+const char xdata InitData[7] =                                   
+{                                                                
+/* Regs  */ 0xA0,0x00,0x00,0x00,0xEE,0x4E,0x00     
+};                                                               
+// END DO NOT EDIT                                               
+                                                                 
+// TO DO: You may add additional code below.
+
+void GpifInit( void )
+{
+  BYTE i;
+ 
+  // Registers which require a synchronization delay, see section 15.14
+  // FIFORESET        FIFOPINPOLAR
+  // INPKTEND         OUTPKTEND
+  // EPxBCH:L         REVCTL
+  // GPIFTCB3         GPIFTCB2
+  // GPIFTCB1         GPIFTCB0
+  // EPxFIFOPFH:L     EPxAUTOINLENH:L
+  // EPxFIFOCFG       EPxGPIFFLGSEL
+  // PINFLAGSxx       EPxFIFOIRQ
+  // EPxFIFOIE        GPIFIRQ
+  // GPIFIE           GPIFADRH:L
+  // UDMACRCH:L       EPxGPIFTRIG
+  // GPIFTRIG
+  
+  // Note: The pre-REVE EPxGPIFTCH/L register are affected, as well...
+  //      ...these have been replaced by GPIFTC[B3:B0] registers
+ 
+  // 8051 doesn't have access to waveform memories 'til
+  // the part is in GPIF mode.
+ 
+  IFCONFIG = 0xEE;
+  // IFCLKSRC=1   , FIFOs executes on internal clk source
+  // xMHz=1       , 48MHz internal clk rate
+  // IFCLKOE=0    , Don't drive IFCLK pin signal at 48MHz
+  // IFCLKPOL=0   , Don't invert IFCLK pin signal from internal clk
+  // ASYNC=1      , master samples asynchronous
+  // GSTATE=1     , Drive GPIF states out on PORTE[2:0], debug WF
+  // IFCFG[1:0]=10, FX2 in GPIF master mode
+ 
+  GPIFABORT = 0xFF;  // abort any waveforms pending
+ 
+  GPIFREADYCFG = InitData[ 0 ];
+  GPIFCTLCFG = InitData[ 1 ];
+  GPIFIDLECS = InitData[ 2 ];
+  GPIFIDLECTL = InitData[ 3 ];
+  GPIFWFSELECT = InitData[ 5 ];
+  GPIFREADYSTAT = InitData[ 6 ];
+ 
+  // use dual autopointer feature... 
+  AUTOPTRSETUP = 0x07;          // inc both pointers, 
+                                // ...warning: this introduces pdata hole(s)
+                                // ...at E67B (XAUTODAT1) and E67C (XAUTODAT2)
+  
+  // source
+  AUTOPTRH1 = MSB( &WaveData );
+  AUTOPTRL1 = LSB( &WaveData );
+  
+  // destination
+  AUTOPTRH2 = 0xE4;
+  AUTOPTRL2 = 0x00;
+ 
+  // transfer
+  for ( i = 0x00; i < 128; i++ )
+  {
+    EXTAUTODAT2 = EXTAUTODAT1;
+  }
+ 
+// Configure GPIF Address pins, output initial value,
+  PORTCCFG = 0xFF;    // [7:0] as alt. func. GPIFADR[7:0]
+  OEC = 0xFF;         // and as outputs
+  PORTECFG |= 0x80;   // [8] as alt. func. GPIFADR[8]
+  OEE |= 0x80;        // and as output
+ 
+// ...OR... tri-state GPIFADR[8:0] pins
+//  PORTCCFG = 0x00;  // [7:0] as port I/O
+//  OEC = 0x00;       // and as inputs
+//  PORTECFG &= 0x7F; // [8] as port I/O
+//  OEE &= 0x7F;      // and as input
+ 
+// GPIF address pins update when GPIFADRH/L written
+  SYNCDELAY;                    // 
+  GPIFADRH = 0x00;    // bits[7:1] always 0
+  SYNCDELAY;                    // 
+  GPIFADRL = 0x00;    // point to PERIPHERAL address 0x0000
+ 
+// Configure GPIF FlowStates registers for Wave 0 of WaveData
+  FLOWSTATE = FlowStates[ 0 ];
+  FLOWLOGIC = FlowStates[ 1 ];
+  FLOWEQ0CTL = FlowStates[ 2 ];
+  FLOWEQ1CTL = FlowStates[ 3 ];
+  FLOWHOLDOFF = FlowStates[ 4 ];
+  FLOWSTB = FlowStates[ 5 ];
+  FLOWSTBEDGE = FlowStates[ 6 ];
+  FLOWSTBHPERIOD = FlowStates[ 7 ];
+}
+ 
diff --git a/firmware/fx2/usrp1/gpif.gpf b/firmware/fx2/usrp1/gpif.gpf
new file mode 100755
index 000000000..854e25399
--- /dev/null
+++ b/firmware/fx2/usrp1/gpif.gpf
diff --git a/firmware/fx2/usrp1/usb_descriptors.a51 b/firmware/fx2/usrp1/usb_descriptors.a51
new file mode 100644
index 000000000..a60adbef8
--- /dev/null
+++ b/firmware/fx2/usrp1/usb_descriptors.a51
@@ -0,0 +1,404 @@
+;;; -*- asm -*-
+;;;
+;;; Copyright 2003 Free Software Foundation, Inc.
+;;; 
+;;; This file is part of GNU Radio
+;;; 
+;;; GNU Radio is free software; you can redistribute it and/or modify
+;;; it under the terms of the GNU General Public License as published by
+;;; the Free Software Foundation; either version 3, or (at your option)
+;;; any later version.
+;;; 
+;;; GNU Radio is distributed in the hope that it will be useful,
+;;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+;;; GNU General Public License for more details.
+;;; 
+;;; You should have received a copy of the GNU General Public License
+;;; along with GNU Radio; see the file COPYING.  If not, write to
+;;; the Free Software Foundation, Inc., 51 Franklin Street,
+;;; Boston, MA 02110-1301, USA.
+;;;
+	
+;;; USB Descriptor table for the USRP
+;;; 
+;;; We're a high-speed only device (480 Mb/sec) with 1 configuration
+;;; and 3 interfaces.  
+;;; 
+;;;	interface 0:	command and status (ep0 COMMAND)
+;;;	interface 1:	Transmit path (ep2 OUT BULK)
+;;;	interface 2:	Receive path (ep6 IN BULK)
+
+	.module usb_descriptors
+	
+	VID_FREE	 = 0xfffe	; Free Software Folks
+	PID_USRP	 = 0x0002	; USRP
+
+	;; We distinguish configured from unconfigured USRPs using the Device ID.
+	;; If the MSB of the DID is 0, the device is unconfigured.
+	;; The LSB of the DID is reserved for hardware revs.
+	
+	DID_USRP	 = 0x0100	; Device ID (bcd)
+
+	
+	DSCR_DEVICE	 =   1	; Descriptor type: Device
+	DSCR_CONFIG	 =   2	; Descriptor type: Configuration
+	DSCR_STRING	 =   3	; Descriptor type: String
+	DSCR_INTRFC	 =   4	; Descriptor type: Interface
+	DSCR_ENDPNT	 =   5	; Descriptor type: Endpoint
+	DSCR_DEVQUAL	 =   6	; Descriptor type: Device Qualifier
+	
+	DSCR_DEVICE_LEN	 =  18
+	DSCR_CONFIG_LEN  =   9
+	DSCR_INTRFC_LEN  =   9
+	DSCR_ENDPNT_LEN  =   7
+	DSCR_DEVQUAL_LEN =  10
+	
+	ET_CONTROL	 =   0	; Endpoint type: Control
+	ET_ISO		 =   1	; Endpoint type: Isochronous
+	ET_BULK		 =   2	; Endpoint type: Bulk
+	ET_INT		 =   3	; Endpoint type: Interrupt
+	
+	
+	;; configuration attributes
+	bmSELF_POWERED	=	1 << 6
+
+;;; --------------------------------------------------------
+;;;	external ram data
+;;;--------------------------------------------------------
+	
+	.area USBDESCSEG    (XDATA)
+	
+;;; ----------------------------------------------------------------
+;;; descriptors used when operating at high speed (480Mb/sec)
+;;; ----------------------------------------------------------------
+	
+	.even	; descriptors must be 2-byte aligned for SUDPTR{H,L} to work
+
+	;; The .even directive isn't really honored by the linker.  Bummer!
+	;; (There's no way to specify an alignment requirement for a given area,
+	;; hence when they're concatenated together, even doesn't work.)
+	;; 
+	;; We work around this by telling the linker to put USBDESCSEG
+	;; at 0xE000 absolute.  This means that the maximimum length of this
+	;; segment is 480 bytes, leaving room for the two hash slots 
+	;; at 0xE1EO to 0xE1FF.  
+	;; 
+	;; As of July 7, 2004, this segment is 326 bytes long
+	
+_high_speed_device_descr::
+	.db	DSCR_DEVICE_LEN
+	.db	DSCR_DEVICE
+	.db	<0x0200		; Specification version (LSB)
+	.db	>0x0200		; Specification version (MSB)
+	.db	0xff		; device class (vendor specific)
+	.db	0xff		; device subclass (vendor specific)
+	.db	0xff		; device protocol (vendor specific)
+	.db	64		; bMaxPacketSize0 for endpoint 0
+	.db	<VID_FREE	; idVendor
+	.db	>VID_FREE	; idVendor
+	.db	<PID_USRP	; idProduct
+	.db	>PID_USRP	; idProduct
+_usb_desc_hw_rev_binary_patch_location_0::
+	.db	<DID_USRP	; bcdDevice
+	.db	>DID_USRP	; bcdDevice
+	.db	SI_VENDOR	; iManufacturer (string index)
+	.db	SI_PRODUCT	; iProduct (string index)
+	.db	SI_SERIAL	; iSerial number (string index)
+	.db	1		; bNumConfigurations
+	
+;;; describes the other speed (12Mb/sec)
+	.even
+_high_speed_devqual_descr::
+	.db	DSCR_DEVQUAL_LEN
+	.db	DSCR_DEVQUAL
+	.db	<0x0200		; bcdUSB (LSB)
+	.db	>0x0200		; bcdUSB (MSB)
+	.db	0xff		; bDeviceClass
+	.db	0xff		; bDeviceSubClass
+	.db	0xff		; bDeviceProtocol
+	.db	64		; bMaxPacketSize0
+	.db	1		; bNumConfigurations (one config at 12Mb/sec)
+	.db	0		; bReserved
+	
+	.even
+_high_speed_config_descr::	
+	.db	DSCR_CONFIG_LEN
+	.db	DSCR_CONFIG
+	.db	<(_high_speed_config_descr_end - _high_speed_config_descr) ; LSB
+	.db	>(_high_speed_config_descr_end - _high_speed_config_descr) ; MSB
+	.db	3		; bNumInterfaces
+	.db	1		; bConfigurationValue
+	.db	0		; iConfiguration
+	.db	0x80 | bmSELF_POWERED ; bmAttributes
+	.db	0		; bMaxPower
+
+	;; interface descriptor 0 (command & status, ep0 COMMAND)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	0		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	0		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_COMMAND_AND_STATUS	; iInterface (description)
+
+	;; interface descriptor 1 (transmit path, ep2 OUT BULK)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	1		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	1		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_TX_PATH	; iInterface (description)
+
+	;; interface 1's end point
+
+	.db	DSCR_ENDPNT_LEN
+	.db	DSCR_ENDPNT
+	.db	0x02		; bEndpointAddress (ep 2 OUT)
+	.db	ET_BULK		; bmAttributes
+	.db	<512		; wMaxPacketSize (LSB)
+	.db	>512		; wMaxPacketSize (MSB)
+	.db	0		; bInterval (iso only)
+
+	;; interface descriptor 2 (receive path, ep6 IN BULK)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	2		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	1		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_RX_PATH	; iInterface (description)
+
+	;; interface 2's end point
+
+	.db	DSCR_ENDPNT_LEN
+	.db	DSCR_ENDPNT
+	.db	0x86		; bEndpointAddress (ep 6 IN)
+	.db	ET_BULK		; bmAttributes
+	.db	<512		; wMaxPacketSize (LSB)
+	.db	>512		; wMaxPacketSize (MSB)
+	.db	0		; bInterval (iso only)
+
+_high_speed_config_descr_end:		
+
+;;; ----------------------------------------------------------------
+;;; descriptors used when operating at full speed (12Mb/sec)
+;;; ----------------------------------------------------------------
+
+	.even
+_full_speed_device_descr::	
+	.db	DSCR_DEVICE_LEN
+	.db	DSCR_DEVICE
+	.db	<0x0200		; Specification version (LSB)
+	.db	>0x0200		; Specification version (MSB)
+	.db	0xff		; device class (vendor specific)
+	.db	0xff		; device subclass (vendor specific)
+	.db	0xff		; device protocol (vendor specific)
+	.db	64		; bMaxPacketSize0 for endpoint 0
+	.db	<VID_FREE	; idVendor
+	.db	>VID_FREE	; idVendor
+	.db	<PID_USRP	; idProduct
+	.db	>PID_USRP	; idProduct
+_usb_desc_hw_rev_binary_patch_location_1::
+	.db	<DID_USRP	; bcdDevice
+	.db	>DID_USRP	; bcdDevice
+	.db	SI_VENDOR	; iManufacturer (string index)
+	.db	SI_PRODUCT	; iProduct (string index)
+	.db	SI_NONE		; iSerial number (None)
+	.db	1		; bNumConfigurations
+	
+	
+;;; describes the other speed (480Mb/sec)
+	.even
+_full_speed_devqual_descr::
+	.db	DSCR_DEVQUAL_LEN
+	.db	DSCR_DEVQUAL
+	.db	<0x0200		; bcdUSB
+	.db	>0x0200		; bcdUSB
+	.db	0xff		; bDeviceClass
+	.db	0xff		; bDeviceSubClass
+	.db	0xff		; bDeviceProtocol
+	.db	64		; bMaxPacketSize0
+	.db	1		; bNumConfigurations (one config at 480Mb/sec)
+	.db	0		; bReserved
+	
+	.even
+_full_speed_config_descr::	
+	.db	DSCR_CONFIG_LEN
+	.db	DSCR_CONFIG
+	.db	<(_full_speed_config_descr_end - _full_speed_config_descr) ; LSB
+	.db	>(_full_speed_config_descr_end - _full_speed_config_descr) ; MSB
+	.db	1		; bNumInterfaces
+	.db	1		; bConfigurationValue
+	.db	0		; iConfiguration
+	.db	0x80 | bmSELF_POWERED ; bmAttributes
+	.db	0		; bMaxPower
+
+	;; interface descriptor 0 (command & status, ep0 COMMAND)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	0		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	0		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_COMMAND_AND_STATUS	; iInterface (description)
+	
+_full_speed_config_descr_end:	
+	
+;;; ----------------------------------------------------------------
+;;;			string descriptors
+;;; ----------------------------------------------------------------
+
+_nstring_descriptors::
+	.db	(_string_descriptors_end - _string_descriptors) / 2
+
+_string_descriptors::
+	.db	<str0, >str0
+	.db	<str1, >str1
+	.db	<str2, >str2
+	.db	<str3, >str3
+	.db	<str4, >str4
+	.db	<str5, >str5
+	.db	<str6, >str6
+_string_descriptors_end:
+
+	SI_NONE = 0
+	;; str0 contains the language ID's.
+	.even
+str0:	.db	str0_end - str0
+	.db	DSCR_STRING
+	.db	0
+	.db	0
+	.db	<0x0409		; magic code for US English (LSB)
+	.db	>0x0409		; magic code for US English (MSB)
+str0_end:
+
+	SI_VENDOR = 1
+	.even
+str1:	.db	str1_end - str1
+	.db	DSCR_STRING
+	.db	'F, 0		; 16-bit unicode
+	.db	'r, 0
+	.db	'e, 0
+	.db	'e, 0
+	.db	' , 0
+	.db	'S, 0
+	.db	'o, 0
+	.db	'f, 0
+	.db	't, 0
+	.db	'w, 0
+	.db	'a, 0
+	.db	'r, 0
+	.db	'e, 0
+	.db	' , 0
+	.db	'F, 0
+	.db	'o, 0
+	.db	'l, 0
+	.db	'k, 0
+	.db	's, 0
+str1_end:
+
+	SI_PRODUCT = 2
+	.even
+str2:	.db	str2_end - str2
+	.db	DSCR_STRING
+	.db	'U, 0
+	.db	'S, 0
+	.db	'R, 0
+	.db	'P, 0
+	.db	' , 0
+	.db	'R, 0
+	.db	'e, 0
+	.db	'v, 0
+	.db	' , 0
+_usb_desc_hw_rev_ascii_patch_location_0::
+	.db	'?, 0
+str2_end:
+
+	SI_COMMAND_AND_STATUS = 3
+	.even
+str3:	.db	str3_end - str3
+	.db	DSCR_STRING
+	.db	'C, 0
+	.db	'o, 0
+	.db	'm, 0
+	.db	'm, 0
+	.db	'a, 0
+	.db	'n, 0
+	.db	'd, 0
+	.db	' , 0
+	.db	'&, 0
+	.db	' , 0
+	.db	'S, 0
+	.db	't, 0
+	.db	'a, 0
+	.db	't, 0
+	.db	'u, 0
+	.db	's, 0
+str3_end:
+
+	SI_TX_PATH = 4
+	.even
+str4:	.db	str4_end - str4
+	.db	DSCR_STRING
+	.db	'T, 0
+	.db	'r, 0
+	.db	'a, 0
+	.db	'n, 0
+	.db	's, 0
+	.db	'm, 0
+	.db	'i, 0
+	.db	't, 0
+	.db	' , 0
+	.db	'P, 0
+	.db	'a, 0
+	.db	't, 0
+	.db	'h, 0
+str4_end:
+
+	SI_RX_PATH = 5
+	.even
+str5:	.db	str5_end - str5
+	.db	DSCR_STRING
+	.db	'R, 0
+	.db	'e, 0
+	.db	'c, 0
+	.db	'e, 0
+	.db	'i, 0
+	.db	'v, 0
+	.db	'e, 0
+	.db	' , 0
+	.db	'P, 0
+	.db	'a, 0
+	.db	't, 0
+	.db	'h, 0
+str5_end:
+
+	SI_SERIAL = 6
+	.even
+str6:	.db	str6_end - str6
+	.db	DSCR_STRING
+_usb_desc_serial_number_ascii::
+	.db	'3, 0
+	.db	'., 0
+	.db	'1, 0
+	.db	'4, 0
+	.db	'1, 0
+	.db	'5, 0
+	.db	'9, 0
+	.db	'3, 0
+str6_end:
+
diff --git a/firmware/fx2/usrp1/usrp_common.c b/firmware/fx2/usrp1/usrp_common.c
new file mode 100644
index 000000000..0998653c2
--- /dev/null
+++ b/firmware/fx2/usrp1/usrp_common.c
@@ -0,0 +1,109 @@
+/*
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+/* 
+ * common code for USRP
+ */
+
+#include "usrp_common.h"
+
+void init_board (void);
+
+void
+init_usrp (void)
+{
+  CPUCS = bmCLKSPD1;	// CPU runs @ 48 MHz
+  CKCON = 0;		// MOVX takes 2 cycles
+
+  // IFCLK is generated internally and runs at 48 MHz; GPIF "master mode"
+
+  IFCONFIG = bmIFCLKSRC | bm3048MHZ | bmIFCLKOE | bmIFCLKPOL | bmIFGPIF;
+  SYNCDELAY;
+
+  // configure IO ports (B and D are used by GPIF)
+
+  IOA = bmPORT_A_INITIAL;	// Port A initial state
+  OEA = bmPORT_A_OUTPUTS;	// Port A direction register
+
+  IOC = bmPORT_C_INITIAL;	// Port C initial state
+  OEC = bmPORT_C_OUTPUTS;	// Port C direction register
+
+  IOE = bmPORT_E_INITIAL;	// Port E initial state
+  OEE = bmPORT_E_OUTPUTS;	// Port E direction register
+
+
+  // REVCTL = bmDYN_OUT | bmENH_PKT;			// highly recommended by docs
+  // SYNCDELAY;
+  
+  // configure end points
+
+  EP1OUTCFG = bmVALID | bmBULK;				SYNCDELAY;
+  EP1INCFG  = bmVALID | bmBULK | bmIN;			SYNCDELAY;
+
+  EP2CFG    = bmVALID | bmBULK | bmQUADBUF;		SYNCDELAY;	// 512 quad bulk OUT
+  EP4CFG    = 0;					SYNCDELAY;	// disabled
+  EP6CFG    = bmVALID | bmBULK | bmQUADBUF | bmIN;	SYNCDELAY;	// 512 quad bulk IN
+  EP8CFG    = 0;					SYNCDELAY;	// disabled
+
+  // reset FIFOs
+
+  FIFORESET = bmNAKALL;					SYNCDELAY;
+  FIFORESET = 2;					SYNCDELAY;
+  // FIFORESET = 4;					SYNCDELAY;
+  FIFORESET = 6;					SYNCDELAY;
+  // FIFORESET = 8;					SYNCDELAY;
+  FIFORESET = 0;					SYNCDELAY;
+  
+  // configure end point FIFOs
+
+  // let core see 0 to 1 transistion of autoout bit
+
+  EP2FIFOCFG =             bmWORDWIDE;			SYNCDELAY;
+  EP2FIFOCFG = bmAUTOOUT | bmWORDWIDE;			SYNCDELAY;
+  EP6FIFOCFG = bmAUTOIN  | bmWORDWIDE;			SYNCDELAY;
+
+
+  // prime the pump 
+
+#if 0
+  EP2BCL  = 0x80;		SYNCDELAY;
+  EP2BCL  = 0x80;		SYNCDELAY;
+  EP2BCL  = 0x80;		SYNCDELAY;
+  EP2BCL  = 0x80;		SYNCDELAY;
+#endif
+
+  EP0BCH = 0;			SYNCDELAY;
+
+  // arm EP1OUT so we can receive "out" packets (TRM pg 8-8)
+
+  EP1OUTBC = 0;			SYNCDELAY;
+
+  EP2GPIFFLGSEL = 0x01;		SYNCDELAY; // For EP2OUT, GPIF uses EF flag
+  EP6GPIFFLGSEL = 0x02;		SYNCDELAY; // For EP6IN,  GPIF uses FF flag
+
+  // set autoin length for EP6
+  // FIXME should be f(enumeration)
+
+  EP6AUTOINLENH = (512) >> 8;	SYNCDELAY;  // this is the length for high speed
+  EP6AUTOINLENL = (512) & 0xff; SYNCDELAY;
+
+  init_board ();
+}
+
diff --git a/firmware/fx2/usrp1/usrp_gpif.c b/firmware/fx2/usrp1/usrp_gpif.c
new file mode 100644
index 000000000..1191c8b28
--- /dev/null
+++ b/firmware/fx2/usrp1/usrp_gpif.c
@@ -0,0 +1,206 @@
+/*
+ * Machine generated by "edit-gpif".  Do not edit by hand.
+ */
+
+// This program configures the General Programmable Interface (GPIF) for FX2.
+// Please do not modify sections of text which are marked as "DO NOT EDIT ...".
+//
+// DO NOT EDIT ...
+// GPIF Initialization
+// Interface Timing      Async
+// Internal Ready Init   IntRdy=1
+// CTL Out Tristate-able Binary
+// SingleWrite WF Select     1
+// SingleRead WF Select      0
+// FifoWrite WF Select       3
+// FifoRead WF Select        2
+// Data Bus Idle Drive   Tristate
+// END DO NOT EDIT
+
+// DO NOT EDIT ...
+// GPIF Wave Names
+// Wave 0   = singlerd
+// Wave 1   = singlewr
+// Wave 2   = FIFORd
+// Wave 3   = FIFOWr
+
+// GPIF Ctrl Outputs   Level
+// CTL 0    = WEN#     CMOS
+// CTL 1    = REN#     CMOS
+// CTL 2    = OE#      CMOS
+// CTL 3    = CLRST    CMOS
+// CTL 4    = unused   CMOS
+// CTL 5    = BOGUS    CMOS
+
+// GPIF Rdy Inputs
+// RDY0     = EF#
+// RDY1     = FF#
+// RDY2     = unused
+// RDY3     = unused
+// RDY4     = unused
+// RDY5     = TCXpire
+// FIFOFlag = FIFOFlag
+// IntReady = IntReady
+// END DO NOT EDIT
+// DO NOT EDIT ...
+//
+// GPIF Waveform 0: singlerd
+//
+// Interval     0         1         2         3         4         5         6     Idle (7)
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val
+// DataMode NO Data   NO Data   NO Data   NO Data   NO Data   NO Data   NO Data
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int
+// IF/Wait  Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1
+//   Term A
+//   LFunc
+//   Term B
+// Branch1
+// Branch0
+// Re-Exec
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default
+// WEN#         0         0         0         0         0         0         0         0
+// REN#         0         0         0         0         0         0         0         0
+// OE#          0         0         0         0         0         0         0         0
+// CLRST        0         0         0         0         0         0         0         0
+// unused       0         0         0         0         0         0         0         0
+// BOGUS        0         0         0         0         0         0         0         0
+//
+// END DO NOT EDIT
+// DO NOT EDIT ...
+//
+// GPIF Waveform 1: singlewr
+//
+// Interval     0         1         2         3         4         5         6     Idle (7)
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val
+// DataMode Activate  Activate  Activate  Activate  Activate  Activate  Activate
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int
+// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1
+//   Term A           EF#
+//   LFunc            AND
+//   Term B           EF#
+// Branch1            ThenIdle
+// Branch0            ElseIdle
+// Re-Exec            No
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default
+// WEN#         0         1         1         1         1         1         1         0
+// REN#         0         0         0         0         0         0         0         0
+// OE#          0         0         0         0         0         0         0         0
+// CLRST        0         0         0         0         0         0         0         0
+// unused       0         0         0         0         0         0         0         0
+// BOGUS        0         0         0         0         0         0         0         0
+//
+// END DO NOT EDIT
+// DO NOT EDIT ...
+//
+// GPIF Waveform 2: FIFORd
+//
+// Interval     0         1         2         3         4         5         6     Idle (7)
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val
+// DataMode NO Data   Activate  NO Data   NO Data   NO Data   NO Data   NO Data
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int
+// IF/Wait  Wait 1    IF        Wait 1    IF        Wait 1    Wait 1    Wait 1
+//   Term A           TCXpire             TCXpire
+//   LFunc            AND                 AND
+//   Term B           TCXpire             TCXpire
+// Branch1            Then 2              ThenIdle
+// Branch0            Else 1              ElseIdle
+// Re-Exec            No                  No
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default
+// WEN#         0         0         0         0         0         0         0         0
+// REN#         1         0         0         0         0         0         0         0
+// OE#          1         1         1         0         0         0         0         0
+// CLRST        0         0         0         0         0         0         0         0
+// unused       0         0         0         0         0         0         0         0
+// BOGUS        0         0         0         0         0         0         0         0
+//
+// END DO NOT EDIT
+// DO NOT EDIT ...
+//
+// GPIF Waveform 3: FIFOWr
+//
+// Interval     0         1         2         3         4         5         6     Idle (7)
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val
+// DataMode NO Data   Activate  Activate  Activate  Activate  Activate  Activate
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int
+// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1
+//   Term A           TCXpire
+//   LFunc            AND
+//   Term B           TCXpire
+// Branch1            ThenIdle
+// Branch0            Else 1
+// Re-Exec            No
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default
+// WEN#         0         0         0         0         0         0         0         0
+// REN#         0         0         0         0         0         0         0         0
+// OE#          0         0         0         0         0         0         0         0
+// CLRST        0         0         0         0         0         0         0         0
+// unused       0         0         0         0         0         0         0         0
+// BOGUS        0         0         0         0         0         0         0         0
+//
+// END DO NOT EDIT
+
+// GPIF Program Code
+
+// DO NOT EDIT ...
+// #include "fx2.h"
+// #include "fx2regs.h"
+// #include "fx2sdly.h"     // SYNCDELAY macro
+// END DO NOT EDIT
+
+// DO NOT EDIT ...
+const char WaveData[128] =
+{
+// Wave 0
+/* LenBr */ 0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
+// Wave 1
+/* LenBr */ 0x01,     0x3F,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x22,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
+/* Output*/ 0x00,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x00,
+/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
+// Wave 2
+/* LenBr */ 0x01,     0x11,     0x01,     0x3F,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x00,     0x03,     0x00,     0x01,     0x00,     0x00,     0x00,     0x00,
+/* Output*/ 0x06,     0x04,     0x04,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* LFun  */ 0x00,     0x2D,     0x00,     0x2D,     0x00,     0x00,     0x00,     0x3F,
+// Wave 3
+/* LenBr */ 0x01,     0x39,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x00,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
+/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* LFun  */ 0x00,     0x2D,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
+};
+// END DO NOT EDIT
+
+// DO NOT EDIT ...
+const char FlowStates[36] =
+{
+/* Wave 0 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/* Wave 1 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/* Wave 2 FlowStates */ 0x81,0x2D,0x26,0x00,0x04,0x04,0x03,0x02,0x00,
+/* Wave 3 FlowStates */ 0x81,0x2D,0x21,0x00,0x04,0x04,0x03,0x02,0x00,
+};
+// END DO NOT EDIT
+
+// DO NOT EDIT ...
+const char InitData[7] =
+{
+/* Regs  */ 0xA0,0x00,0x00,0x00,0xEE,0x4E,0x00
+};
+// END DO NOT EDIT
+
+// TO DO: You may add additional code below.
+
diff --git a/firmware/fx2/usrp1/usrp_gpif_inline.h b/firmware/fx2/usrp1/usrp_gpif_inline.h
new file mode 100644
index 000000000..77a741a8b
--- /dev/null
+++ b/firmware/fx2/usrp1/usrp_gpif_inline.h
@@ -0,0 +1,27 @@
+/*
+ * Machine generated by "edit-gpif".  Do not edit by hand.
+ */
+
+#define setup_flowstate_common()	\
+do {					\
+     FLOWSTATE = 0x81;			\
+     FLOWLOGIC = 0x2d;			\
+    FLOWEQ0CTL = 0x26;			\
+    FLOWEQ1CTL = 0x00;			\
+   FLOWHOLDOFF = 0x04;			\
+       FLOWSTB = 0x04;			\
+   FLOWSTBEDGE = 0x03;			\
+FLOWSTBHPERIOD = 0x02;			\
+GPIFHOLDAMOUNT = 0x00;			\
+} while (0)
+
+#define setup_flowstate_read()	\
+do {					\
+    FLOWEQ0CTL = 0x26;			\
+} while (0)
+
+#define setup_flowstate_write()	\
+do {					\
+    FLOWEQ0CTL = 0x21;			\
+} while (0)
+
diff --git a/firmware/fx2/usrp1/usrp_main.c b/firmware/fx2/usrp1/usrp_main.c
new file mode 100644
index 000000000..3eb8c001f
--- /dev/null
+++ b/firmware/fx2/usrp1/usrp_main.c
@@ -0,0 +1,389 @@
+/* 
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003,2004 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+#include "usrp_common.h"
+#include "usrp_regs.h"
+#include "usrp_commands.h"
+#include "fpga.h"
+#include "usrp_gpif_inline.h"
+#include "timer.h"
+#include "i2c.h"
+#include "isr.h"
+#include "usb_common.h"
+#include "fx2utils.h"
+#include "usrp_globals.h"
+#include "usrp_i2c_addr.h"
+#include <string.h>
+#include "spi.h"
+#include "eeprom_io.h"
+#include "usb_descriptors.h"
+
+/*
+ * offsets into boot eeprom for configuration values
+ */
+#define	HW_REV_OFFSET		  5
+#define SERIAL_NO_OFFSET	248
+#define SERIAL_NO_LEN		  8
+
+
+#define	bRequestType	SETUPDAT[0]
+#define	bRequest	SETUPDAT[1]
+#define	wValueL		SETUPDAT[2]
+#define	wValueH		SETUPDAT[3]
+#define	wIndexL		SETUPDAT[4]
+#define	wIndexH		SETUPDAT[5]
+#define	wLengthL	SETUPDAT[6]
+#define	wLengthH	SETUPDAT[7]
+
+
+unsigned char g_tx_enable = 0;
+unsigned char g_rx_enable = 0;
+unsigned char g_rx_overrun = 0;
+unsigned char g_tx_underrun = 0;
+
+/*
+ * the host side fpga loader code pushes an MD5 hash of the bitstream
+ * into hash1.
+ */
+#define	  USRP_HASH_SIZE      16
+xdata at USRP_HASH_SLOT_1_ADDR unsigned char hash1[USRP_HASH_SIZE];
+
+static void
+get_ep0_data (void)
+{
+  EP0BCL = 0;			// arm EP0 for OUT xfer.  This sets the busy bit
+
+  while (EP0CS & bmEPBUSY)	// wait for busy to clear
+    ;
+}
+
+/*
+ * Handle our "Vendor Extension" commands on endpoint 0.
+ * If we handle this one, return non-zero.
+ */
+unsigned char
+app_vendor_cmd (void)
+{
+  if (bRequestType == VRT_VENDOR_IN){
+
+    /////////////////////////////////
+    //    handle the IN requests
+    /////////////////////////////////
+
+    switch (bRequest){
+
+    case VRQ_GET_STATUS:
+      switch (wIndexL){
+
+      case GS_TX_UNDERRUN:
+	EP0BUF[0] = g_tx_underrun;
+	g_tx_underrun = 0;
+	EP0BCH = 0;
+	EP0BCL = 1;
+	break;
+
+      case GS_RX_OVERRUN:
+	EP0BUF[0] = g_rx_overrun;
+	g_rx_overrun = 0;
+	EP0BCH = 0;
+	EP0BCL = 1;
+	break;
+
+      default:
+	return 0;
+      }
+      break;
+
+    case VRQ_I2C_READ:
+      if (!i2c_read (wValueL, EP0BUF, wLengthL))
+	return 0;
+
+      EP0BCH = 0;
+      EP0BCL = wLengthL;
+      break;
+
+    case VRQ_SPI_READ:
+      if (!spi_read (wValueH, wValueL, wIndexH, wIndexL, EP0BUF, wLengthL))
+	return 0;
+
+      EP0BCH = 0;
+      EP0BCL = wLengthL;
+      break;
+
+    case VRQ_SPI_TRANSACT:
+      if (!spi_transact (wValueH, wValueL, wIndexH, wIndexL, wLengthH, EP0BUF, wLengthL))
+	return 0;
+
+      EP0BCH = 0;
+      EP0BCL = wLengthL;
+      break;
+
+    default:
+      return 0;
+    }
+  }
+
+  else if (bRequestType == VRT_VENDOR_OUT){
+
+    /////////////////////////////////
+    //    handle the OUT requests
+    /////////////////////////////////
+
+    switch (bRequest){
+
+    case VRQ_SET_LED:
+      switch (wIndexL){
+      case 0:
+	set_led_0 (wValueL);
+	break;
+	
+      case 1:
+	set_led_1 (wValueL);
+	break;
+	
+      default:
+	return 0;
+      }
+      break;
+      
+    case VRQ_FPGA_LOAD:
+      switch (wIndexL){			// sub-command
+      case FL_BEGIN:
+	return fpga_load_begin ();
+	
+      case FL_XFER:
+	get_ep0_data ();
+	return fpga_load_xfer (EP0BUF, EP0BCL);
+	
+      case FL_END:
+	return fpga_load_end ();
+	
+      default:
+	return 0;
+      }
+      break;
+      
+
+    case VRQ_FPGA_SET_RESET:
+      fpga_set_reset (wValueL);
+      break;
+      
+    case VRQ_FPGA_SET_TX_ENABLE:
+      fpga_set_tx_enable (wValueL);
+      break;
+      
+    case VRQ_FPGA_SET_RX_ENABLE:
+      fpga_set_rx_enable (wValueL);
+      break;
+
+    case VRQ_FPGA_SET_TX_RESET:
+      fpga_set_tx_reset (wValueL);
+      break;
+      
+    case VRQ_FPGA_SET_RX_RESET:
+      fpga_set_rx_reset (wValueL);
+      break;
+
+    case VRQ_I2C_WRITE:
+      get_ep0_data ();
+      if (!i2c_write (wValueL, EP0BUF, EP0BCL))
+	return 0;
+      break;
+
+    case VRQ_SPI_WRITE:
+      get_ep0_data ();
+      if (!spi_write (wValueH, wValueL, wIndexH, wIndexL, EP0BUF, EP0BCL))
+	return 0;
+      break;
+
+    default:
+      return 0;
+    }
+
+  }
+  else
+    return 0;    // invalid bRequestType
+
+  return 1;
+}
+
+
+
+static void
+main_loop (void)
+{
+  setup_flowstate_common ();
+
+  while (1){
+
+    if (usb_setup_packet_avail ())
+      usb_handle_setup_packet ();
+    
+  
+    if (GPIFTRIG & bmGPIF_IDLE){
+
+      // OK, GPIF is idle.  Let's try to give it some work.
+
+      // First check for underruns and overruns
+
+      if (UC_BOARD_HAS_FPGA && (USRP_PA & (bmPA_TX_UNDERRUN | bmPA_RX_OVERRUN))){
+      
+	// record the under/over run
+	if (USRP_PA & bmPA_TX_UNDERRUN)
+	  g_tx_underrun = 1;
+
+	if (USRP_PA & bmPA_RX_OVERRUN)
+	  g_rx_overrun = 1;
+
+	// tell the FPGA to clear the flags
+	fpga_clear_flags ();
+      }
+
+      // Next see if there are any "OUT" packets waiting for our attention,
+      // and if so, if there's room in the FPGA's FIFO for them.
+
+      if (g_tx_enable && !(EP24FIFOFLGS & 0x02)){  // USB end point fifo is not empty...
+
+	if (fpga_has_room_for_packet ()){	   // ... and FPGA has room for packet
+
+	  GPIFTCB1 = 0x01;	SYNCDELAY;
+	  GPIFTCB0 = 0x00;	SYNCDELAY;
+
+	  setup_flowstate_write ();
+
+	  SYNCDELAY;
+	  GPIFTRIG = bmGPIF_EP2_START | bmGPIF_WRITE; 	// start the xfer
+	  SYNCDELAY;
+
+	  while (!(GPIFTRIG & bmGPIF_IDLE)){
+	    // wait for the transaction to complete
+	  }
+	}
+      }
+
+      // See if there are any requests for "IN" packets, and if so
+      // whether the FPGA's got any packets for us.
+
+      if (g_rx_enable && !(EP6CS & bmEPFULL)){	// USB end point fifo is not full...
+
+	if (fpga_has_packet_avail ()){		// ... and FPGA has packet available
+
+	  GPIFTCB1 = 0x01;	SYNCDELAY;
+	  GPIFTCB0 = 0x00;	SYNCDELAY;
+
+	  setup_flowstate_read ();
+
+	  SYNCDELAY;
+	  GPIFTRIG = bmGPIF_EP6_START | bmGPIF_READ; 	// start the xfer
+	  SYNCDELAY;
+
+	  while (!(GPIFTRIG & bmGPIF_IDLE)){
+	    // wait for the transaction to complete
+	  }
+
+	  SYNCDELAY;
+	  INPKTEND = 6;	// tell USB we filled buffer (6 is our endpoint num)
+	}
+      }
+    }
+  }
+}
+
+
+/*
+ * called at 100 Hz from timer2 interrupt
+ *
+ * Toggle led 0
+ */
+void
+isr_tick (void) interrupt
+{
+  static unsigned char	count = 1;
+  
+  if (--count == 0){
+    count = 50;
+    USRP_LED_REG ^= bmLED0;
+  }
+
+  clear_timer_irq ();
+}
+
+/*
+ * Read h/w rev code and serial number out of boot eeprom and
+ * patch the usb descriptors with the values.
+ */
+void
+patch_usb_descriptors(void)
+{
+  static xdata unsigned char hw_rev;
+  static xdata unsigned char serial_no[8];
+  unsigned char i;
+
+  eeprom_read(I2C_ADDR_BOOT, HW_REV_OFFSET, &hw_rev, 1);	// LSB of device id
+  usb_desc_hw_rev_binary_patch_location_0[0] = hw_rev;
+  usb_desc_hw_rev_binary_patch_location_1[0] = hw_rev;
+  usb_desc_hw_rev_ascii_patch_location_0[0] = hw_rev + '0';     // FIXME if we get > 9
+
+  eeprom_read(I2C_ADDR_BOOT, SERIAL_NO_OFFSET, serial_no, SERIAL_NO_LEN);
+
+  for (i = 0; i < SERIAL_NO_LEN; i++){
+    unsigned char ch = serial_no[i];
+    if (ch == 0xff)	// make unprogrammed EEPROM default to '0'
+      ch = '0';
+    usb_desc_serial_number_ascii[i << 1] = ch;
+  }
+}
+
+void
+main (void)
+{
+#if 0
+  g_rx_enable = 0;	// FIXME (work around initialization bug)
+  g_tx_enable = 0;
+  g_rx_overrun = 0;
+  g_tx_underrun = 0;
+#endif
+
+  memset (hash1, 0, USRP_HASH_SIZE);	// zero fpga bitstream hash.  This forces reload
+  
+  init_usrp ();
+  init_gpif ();
+  
+  // if (UC_START_WITH_GSTATE_OUTPUT_ENABLED)
+  IFCONFIG |= bmGSTATE;			// no conflict, start with it on
+
+  set_led_0 (0);
+  set_led_1 (0);
+  
+  EA = 0;		// disable all interrupts
+
+  patch_usb_descriptors();
+
+  setup_autovectors ();
+  usb_install_handlers ();
+  hook_timer_tick ((unsigned short) isr_tick);
+
+  EIEX4 = 1;		// disable INT4 FIXME
+  EA = 1;		// global interrupt enable
+
+  fx2_renumerate ();	// simulates disconnect / reconnect
+
+  main_loop ();
+}
diff --git a/firmware/fx2/usrp1/usrp_regs.h b/firmware/fx2/usrp1/usrp_regs.h
new file mode 100644
index 000000000..a4f1d9896
--- /dev/null
+++ b/firmware/fx2/usrp1/usrp_regs.h
@@ -0,0 +1,163 @@
+/*
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+/*
+ * These are the register definitions for the Rev 1 USRP prototype
+ * The Rev 1 is the version with the AD9862's and daughterboards
+ */
+
+#ifndef _USRP_REV1_REGS_H_
+#define _USRP_REV1_REGS_H_
+
+#include "fx2regs.h"
+
+/*
+ * Port A (bit addressable):
+ */
+
+#define USRP_PA			IOA		// Port A
+#define	USRP_PA_OE		OEA		// Port A direction register
+
+#define bmPA_S_CLK		bmBIT0		// SPI serial clock
+#define	bmPA_S_DATA_TO_PERIPH	bmBIT1		// SPI SDI (peripheral rel name)
+#define bmPA_S_DATA_FROM_PERIPH	bmBIT2		// SPI SDO (peripheral rel name)
+#define bmPA_SEN_FPGA		bmBIT3		// serial enable for FPGA (active low)
+#define	bmPA_SEN_CODEC_A	bmBIT4		// serial enable AD9862 A (active low)
+#define	bmPA_SEN_CODEC_B	bmBIT5		// serial enable AD9862 B (active low)
+//#define bmPA_FX2_2		bmBIT6		// misc pin to FPGA (overflow)
+//#define bmPA_FX2_3		bmBIT7		// misc pin to FPGA (underflow)
+#define	bmPA_RX_OVERRUN		bmBIT6		// misc pin to FPGA (overflow)
+#define	bmPA_TX_UNDERRUN	bmBIT7		// misc pin to FPGA (underflow)
+
+
+sbit at 0x80+0 bitS_CLK;		// 0x80 is the bit address of PORT A
+sbit at 0x80+1 bitS_OUT;		// out from FX2 point of view
+sbit at 0x80+2 bitS_IN;			// in from FX2 point of view
+
+
+/* all outputs except S_DATA_FROM_PERIPH, FX2_2, FX2_3 */
+
+#define	bmPORT_A_OUTPUTS  (bmPA_S_CLK			\
+			   | bmPA_S_DATA_TO_PERIPH	\
+			   | bmPA_SEN_FPGA		\
+			   | bmPA_SEN_CODEC_A		\
+			   | bmPA_SEN_CODEC_B		\
+			   )
+
+#define	bmPORT_A_INITIAL   (bmPA_SEN_FPGA | bmPA_SEN_CODEC_A | bmPA_SEN_CODEC_B)
+
+
+/* Port B: GPIF	FD[7:0]			*/
+
+/*
+ * Port C (bit addressable):
+ *    5:1 FPGA configuration
+ */
+
+#define	USRP_PC			IOC		// Port C
+#define	USRP_PC_OE		OEC		// Port C direction register
+
+#define	USRP_ALTERA_CONFIG	USRP_PC
+
+#define	bmPC_nRESET		bmBIT0		// reset line to codecs (active low)
+#define bmALTERA_DATA0		bmBIT1
+#define bmALTERA_NCONFIG	bmBIT2
+#define bmALTERA_DCLK		bmBIT3
+#define bmALTERA_CONF_DONE	bmBIT4
+#define bmALTERA_NSTATUS	bmBIT5
+#define	bmPC_LED0		bmBIT6		// active low
+#define	bmPC_LED1		bmBIT7		// active low
+
+sbit at 0xA0+1 bitALTERA_DATA0;		// 0xA0 is the bit address of PORT C
+sbit at 0xA0+3 bitALTERA_DCLK;
+
+
+#define	bmALTERA_BITS		(bmALTERA_DATA0			\
+				 | bmALTERA_NCONFIG		\
+				 | bmALTERA_DCLK		\
+				 | bmALTERA_CONF_DONE		\
+				 | bmALTERA_NSTATUS)
+
+#define	bmPORT_C_OUTPUTS	(bmPC_nRESET			\
+				 | bmALTERA_DATA0 		\
+				 | bmALTERA_NCONFIG		\
+				 | bmALTERA_DCLK		\
+				 | bmPC_LED0			\
+				 | bmPC_LED1			\
+				 )
+
+#define	bmPORT_C_INITIAL	(bmPC_LED0 | bmPC_LED1)
+
+
+#define	USRP_LED_REG		USRP_PC
+#define	bmLED0			bmPC_LED0
+#define	bmLED1			bmPC_LED1
+
+
+/* Port D: GPIF	FD[15:8]		*/
+
+/* Port E: not bit addressible		*/
+
+#define	USRP_PE			IOE		// Port E
+#define	USRP_PE_OE		OEE		// Port E direction register
+
+#define bmPE_PE0		bmBIT0		// GPIF debug output
+#define	bmPE_PE1		bmBIT1		// GPIF debug output
+#define	bmPE_PE2		bmBIT2		// GPIF debug output
+#define	bmPE_FPGA_CLR_STATUS	bmBIT3		// misc pin to FPGA (clear status)
+#define	bmPE_SEN_TX_A		bmBIT4		// serial enable d'board TX A (active low)
+#define	bmPE_SEN_RX_A		bmBIT5		// serial enable d'board RX A (active low)
+#define	bmPE_SEN_TX_B		bmBIT6		// serial enable d'board TX B (active low)
+#define bmPE_SEN_RX_B		bmBIT7		// serial enable d'board RX B (active low)
+
+
+#define	bmPORT_E_OUTPUTS	(bmPE_FPGA_CLR_STATUS	\
+				 | bmPE_SEN_TX_A 	\
+				 | bmPE_SEN_RX_A	\
+				 | bmPE_SEN_TX_B	\
+				 | bmPE_SEN_RX_B	\
+				 )
+
+
+#define	bmPORT_E_INITIAL	(bmPE_SEN_TX_A 		\
+				 | bmPE_SEN_RX_A	\
+				 | bmPE_SEN_TX_B	\
+				 | bmPE_SEN_RX_B	\
+				 )
+
+/*
+ * FPGA output lines that are tied to FX2 RDYx inputs.
+ * These are readable using GPIFREADYSTAT.
+ */
+#define	bmFPGA_HAS_SPACE		bmBIT0	// usbrdy[0] has room for 512 byte packet
+#define	bmFPGA_PKT_AVAIL		bmBIT1	// usbrdy[1] has >= 512 bytes available
+// #define	bmTX_UNDERRUN			bmBIT2  // usbrdy[2] D/A ran out of data
+// #define	bmRX_OVERRUN			bmBIT3	// usbrdy[3] A/D ran out of buffer
+
+/*
+ * FPGA input lines that are tied to the FX2 CTLx outputs.
+ *
+ * These are controlled by the GPIF microprogram...
+ */
+// WR					bmBIT0	// usbctl[0]
+// RD					bmBIT1	// usbctl[1]
+// OE					bmBIT2	// usbctl[2]
+
+#endif /* _USRP_REV1_REGS_H_ */