aboutsummaryrefslogtreecommitdiffstats
path: root/eth/bench/verilog
diff options
context:
space:
mode:
authorjcorgan <jcorgan@221aa14e-8319-0410-a670-987f0aec2ac5>2008-09-08 01:00:12 +0000
committerjcorgan <jcorgan@221aa14e-8319-0410-a670-987f0aec2ac5>2008-09-08 01:00:12 +0000
commit61f2f0214c5999ea42a368a4fc99f03d8eb28d1e (patch)
treee7e24a9adc05ff1422fe3ada9926a51634741b47 /eth/bench/verilog
downloaduhd-61f2f0214c5999ea42a368a4fc99f03d8eb28d1e.tar.gz
uhd-61f2f0214c5999ea42a368a4fc99f03d8eb28d1e.tar.bz2
uhd-61f2f0214c5999ea42a368a4fc99f03d8eb28d1e.zip
Merged r9433:9527 from features/gr-usrp2 into trunk. Adds usrp2 and gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5
Diffstat (limited to 'eth/bench/verilog')
-rw-r--r--eth/bench/verilog/100m.scr38
-rw-r--r--eth/bench/verilog/Phy_sim.v113
-rw-r--r--eth/bench/verilog/User_int_sim.v230
-rw-r--r--eth/bench/verilog/error.scr146
-rw-r--r--eth/bench/verilog/files.lst42
-rw-r--r--eth/bench/verilog/host_sim.v82
-rw-r--r--eth/bench/verilog/icomp.bat1
-rw-r--r--eth/bench/verilog/isim.bat1
-rw-r--r--eth/bench/verilog/jumbo_err.scr40
-rw-r--r--eth/bench/verilog/jumbos.scr27
-rw-r--r--eth/bench/verilog/mdio.scr52
-rw-r--r--eth/bench/verilog/miim_model.v14
-rw-r--r--eth/bench/verilog/misc.scr92
-rw-r--r--eth/bench/verilog/pause.scr45
-rw-r--r--eth/bench/verilog/tb_top.v1057
-rw-r--r--eth/bench/verilog/test.scr23
-rw-r--r--eth/bench/verilog/txmac.scr93
-rw-r--r--eth/bench/verilog/xlnx_glbl.v29
18 files changed, 2125 insertions, 0 deletions
diff --git a/eth/bench/verilog/100m.scr b/eth/bench/verilog/100m.scr
new file mode 100644
index 000000000..0dd59b894
--- /dev/null
+++ b/eth/bench/verilog/100m.scr
@@ -0,0 +1,38 @@
+// This tests just runs a few packets at 10/100 Mbps and 1 Gbps instead of only the usual 1 Gbps
+
+// Read from register 24 to confirm that Rx CRC check is enabled
+03 00 18 00 01 ff ff
+
+// Set speed to 1000 Mbps for a starter
+01 00 22 00 04
+
+// Setup Tx and Rx MAC addresses and type field to "IP"
+// Set Tx Data at offset 0, length 14 to 123456789ABC CBA987654321 0800
+10 00 00 00 0E 12 34 56 78 9A BC CB A9 87 65 43 21 08 00
+
+// Transmit a 1000-byte frame 1 time - and expect it to be received again!
+20 03 E8 00 01
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+// Set speed to 100 Mbps - this is 10x slower!
+01 00 22 00 02
+
+// Transmit a 1000-byte frame 1 time - and expect it to be received again!
+20 03 E8 00 01
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+// Set speed to 10 Mbps - this is yet another 10x slower!
+01 00 22 00 01
+
+// Transmit a 1000-byte frame 1 time - and expect it to be received again!
+20 03 E8 00 01
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+// Halt
+FF
diff --git a/eth/bench/verilog/Phy_sim.v b/eth/bench/verilog/Phy_sim.v
new file mode 100644
index 000000000..f51ddbd82
--- /dev/null
+++ b/eth/bench/verilog/Phy_sim.v
@@ -0,0 +1,113 @@
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Phy_sim.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: Phy_sim.v,v $
+// Revision 1.3 2006/11/17 17:53:07 maverickist
+// no message
+//
+// Revision 1.2 2006/01/19 14:07:50 maverickist
+// verification is complete.
+//
+// Revision 1.1.1.1 2005/12/13 01:51:44 Administrator
+// no message
+//
+
+`timescale 1ns/100ps
+
+module Phy_sim(
+ input Gtx_clk, // Used only in GMII mode
+ output Rx_clk,
+ output Tx_clk, // Used only in MII mode
+ input Tx_er,
+ input Tx_en,
+ input [7:0] Txd,
+ output Rx_er,
+ output Rx_dv,
+ output [7:0] Rxd,
+ output Crs,
+ output Col,
+ input [2:0] Speed,
+ input Done
+);
+
+//////////////////////////////////////////////////////////////////////
+// this file used to simulate Phy.
+// generate clk and loop the Tx data to Rx data
+// full duplex mode can be verified on loop mode.
+//////////////////////////////////////////////////////////////////////
+//////////////////////////////////////////////////////////////////////
+// internal signals
+//////////////////////////////////////////////////////////////////////
+reg Clk_25m; // Used for 100 Mbps mode
+reg Clk_2_5m; // Used for 10 Mbps mode
+
+//wire Rx_clk;
+//wire Tx_clk; // Used only in MII mode
+
+ initial
+ begin
+ #10;
+ while ( !Done )
+ begin
+ #20 Clk_25m = 0;
+ #20 Clk_25m = 1;
+ end
+ end
+
+ initial
+ begin
+ #10;
+ while ( !Done )
+ begin
+ #200 Clk_2_5m = 0;
+ #200 Clk_2_5m = 1;
+ end
+ end
+
+ assign Rx_clk = Speed[2] ? Gtx_clk : Speed[1] ? Clk_25m : Speed[0] ? Clk_2_5m : 0;
+ assign Tx_clk = Speed[2] ? Gtx_clk : Speed[1] ? Clk_25m : Speed[0] ? Clk_2_5m : 0;
+
+ assign Rx_dv = Tx_en;
+ assign Rxd = Txd;
+ assign Rx_er = Tx_er;
+ assign Crs = Tx_en;
+ assign Col = 0;
+
+endmodule
diff --git a/eth/bench/verilog/User_int_sim.v b/eth/bench/verilog/User_int_sim.v
new file mode 100644
index 000000000..3f4aa249b
--- /dev/null
+++ b/eth/bench/verilog/User_int_sim.v
@@ -0,0 +1,230 @@
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// User_input_sim.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: User_int_sim.v,v $
+// Revision 1.3 2006/11/17 17:53:07 maverickist
+// no message
+//
+// Revision 1.2 2006/01/19 14:07:50 maverickist
+// verification is complete.
+//
+// Revision 1.2 2005/12/13 12:15:35 Administrator
+// no message
+//
+// Revision 1.1.1.1 2005/12/13 01:51:44 Administrator
+// no message
+//
+module User_int_sim (
+ Reset,
+ Clk_user,
+ CPU_init_end,
+
+ Rx_mac_ra,
+ Rx_mac_rd,
+ Rx_mac_data,
+ Rx_mac_BE,
+ Rx_mac_pa,
+ Rx_mac_sop,
+ Rx_mac_eop,
+
+ Tx_mac_wa,
+ Tx_mac_wr,
+ Tx_mac_data,
+ Tx_mac_BE,
+ Tx_mac_sop,
+ Tx_mac_eop
+);
+
+ input Reset;
+ input Clk_user;
+ input CPU_init_end;
+
+ input Rx_mac_ra;
+ output Rx_mac_rd;
+ input [31:0] Rx_mac_data;
+ input [1:0] Rx_mac_BE;
+ input Rx_mac_pa;
+ input Rx_mac_sop;
+ input Rx_mac_eop;
+
+ input Tx_mac_wa;
+ output reg Tx_mac_wr;
+ output reg [31:0] Tx_mac_data;
+ output reg [1:0] Tx_mac_BE; // Big endian
+ output reg Tx_mac_sop;
+ output reg Tx_mac_eop;
+
+//////////////////////////////////////////////////////////////////////
+// Internal signals
+//////////////////////////////////////////////////////////////////////
+
+ reg [4:0] operation;
+ reg [31:0] data;
+ reg Rx_mac_rd;
+ reg Start_tran;
+
+//////////////////////////////////////////////////////////////////////
+//generate Tx user data
+//////////////////////////////////////////////////////////////////////
+
+ initial
+ begin
+ operation = 0;
+ data = 0;
+ end
+
+ task SendPacket;
+ input [15:0] Length;
+ input [7:0] StartByte;
+
+ reg [15:0] Counter;
+ reg [7:0] TxData;
+
+ begin
+ Counter=Length;
+ TxData = StartByte;
+ Tx_mac_sop = 1; // First time
+ while ( Counter>0 )
+ begin
+ while ( !Tx_mac_wa )
+ begin
+ Tx_mac_wr = 0;
+ @( posedge Clk_user );
+ end
+
+ Tx_mac_data[31:24] = TxData;
+ Tx_mac_data[23:16] = TxData+1;
+ Tx_mac_data[15:8] = TxData+2;
+ Tx_mac_data[ 7:0] = TxData+3;
+ TxData = TxData+4;
+ if ( Counter<=4 )
+ begin
+ // Indicate how many bytes are valid
+ if ( Counter==4 )
+ Tx_mac_BE = 2'b00;
+ else
+ Tx_mac_BE = Counter;
+ Tx_mac_eop = 1;
+ end
+ Tx_mac_wr = 1;
+
+ if ( Counter >= 4 )
+ Counter = Counter - 4;
+ else
+ Counter = 0;
+ @( posedge Clk_user );
+ Tx_mac_sop = 0;
+ end
+
+ Tx_mac_eop = 0;
+ Tx_mac_wr = 0;
+ Tx_mac_data = 32'h0;
+ Tx_mac_BE = 2'b00;
+ end
+ endtask
+
+ always @( posedge Clk_user or posedge Reset )
+ if (Reset)
+ Start_tran <= 0;
+ else if (Tx_mac_eop && !Tx_mac_wa)
+ Start_tran <= 0;
+ else if (Tx_mac_wa)
+ Start_tran <= 1;
+
+ always @(posedge Clk_user)
+ if (Tx_mac_wa && CPU_init_end)
+ /* $ip_32W_gen("../data/config.ini",operation,data); */
+ ;
+ else
+ begin
+ operation <= 0;
+ data <= 0;
+ end
+
+ initial
+ begin
+ Tx_mac_sop = 0;
+ Tx_mac_eop = 0;
+ Tx_mac_wr = 0;
+ Tx_mac_data = 32'h0;
+ Tx_mac_BE = 2'b00;
+
+ #100;
+ while ( Reset )
+ @( posedge Clk_user );
+
+ @( posedge Clk_user );
+
+ while ( !CPU_init_end )
+ @( posedge Clk_user );
+
+ SendPacket( 64, 8'h11 );
+ repeat( 20 )
+ @( posedge Clk_user );
+ SendPacket( 1500, 8'h12 );
+
+ end
+
+// assign Tx_mac_data = data;
+// assign Tx_mac_wr = operation[4];
+// assign Tx_mac_sop = operation[3];
+// assign Tx_mac_eop = operation[2];
+// assign Tx_mac_BE = operation[1:0];
+
+//////////////////////////////////////////////////////////////////////
+//verify Rx user data
+//////////////////////////////////////////////////////////////////////
+
+ always @ (posedge Clk_user or posedge Reset)
+ if (Reset)
+ Rx_mac_rd <= 0;
+ else if (Rx_mac_ra)
+ Rx_mac_rd <= 1;
+ else
+ Rx_mac_rd <= 0;
+
+ always @ (posedge Clk_user )
+ if (Rx_mac_pa)
+ /* $ip_32W_check( Rx_mac_data,
+ {Rx_mac_sop,Rx_mac_eop,Rx_mac_eop?Rx_mac_BE:2'b0});
+ */
+ ;
+
+endmodule
diff --git a/eth/bench/verilog/error.scr b/eth/bench/verilog/error.scr
new file mode 100644
index 000000000..af42634a8
--- /dev/null
+++ b/eth/bench/verilog/error.scr
@@ -0,0 +1,146 @@
+// This tests sends 5 packets, injecting a bit error in two of them
+// to verify the Rx CRC check works. The corresponding RMON statistics
+// counter is finally checked to verify that the error was registered
+
+// Read from register 24 to confirm that Rx CRC check is enabled
+03 00 18 00 01 ff ff
+
+// Set speed to 1000 Mbps
+01 00 22 00 04
+
+// Setup Tx and Rx MAC addresses and type field to "IP"
+// Set Tx Data at offset 0, length 14 to 123456789ABC CBA987654321 0800
+10 00 00 00 0E 12 34 56 78 9A BC CB A9 87 65 43 21 08 00
+
+//--- Packets #0 & 1 --------------------------------------------------------
+
+// Transmit a 200-byte frame 1 time - and expect it to be received again!
+20 00 C8 00 01
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+// Transmit a 200-byte frame 1 time - but expect to receive it with error!
+25 00 C8 00 01
+
+// Inject a single bit error in the packet (data bit 0) - this will cause a CRC error
+23 00 01
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+//--- Packets #2 & 3 --------------------------------------------------------
+
+// Transmit a 200-byte frame 1 time - and expect it to be received again!
+20 00 C8 00 01
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+// Transmit a 200-byte frame 1 time - but expect to receive it with error!
+25 00 C8 00 01
+
+// Inject a single bit error in the packet (data bit 7) - this will cause a CRC error
+23 00 80
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+//--- Packets #4 & 5 --------------------------------------------------------
+
+// Transmit a 200-byte frame 1 time - and expect it to be received again!
+20 00 C8 00 01
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+// Transmit a 200-byte frame 1 time - but don't expect it to be received again!
+21 00 C8 00 01
+
+// Inject a single bit error in the packet (RxEn) - this will cause a packet discard!
+// (because it happens early in the packet)
+23 01 00
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+//--- Packets #6 & 7 --------------------------------------------------------
+
+// Transmit a 200-byte frame 1 time - and expect it to be received again!
+20 00 C8 00 01
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+// Transmit a 200-byte frame 1 time - but don't expect it to be received again!
+21 00 C8 00 01
+
+// Inject a single bit error in the packet (RxEr)
+23 02 00
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+//--- Packet #8 -------------------------------------------------------------
+
+// Transmit a 200-byte frame 1 time - and expect it to be received again!
+20 00 C8 00 01
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+//---------------------------------------------------------------------------
+
+// Set CPU_rd_addr to address RxCRCErrCounter
+01 00 1C 00 05
+
+// Assert CPU_rd_apply
+01 00 1D 00 01
+
+// Kill a little time while waiting for CPU_rd_grant to assert...
+02 00 1E
+02 00 1E
+02 00 1E
+02 00 1E
+
+// Confirm that CPU_rd_grant is asserted
+03 00 1E 00 01 ff ff
+
+// Read & check low part of RxCRCErrCounter (0x0002)
+03 00 1F 00 02 ff ff
+
+// Read & check high part of RxCRCErrCounter (0x0000)
+03 00 20 00 00 ff ff
+
+// Negate CPU_rd_apply
+01 00 1D 00 00
+
+//---------------------------------------------------------------------------
+
+// Set CPU_rd_addr to address RxTooShortTooLongCounter
+01 00 1C 00 07
+
+// Assert CPU_rd_apply
+01 00 1D 00 01
+
+// Kill a little time while waiting for CPU_rd_grant to assert...
+02 00 1E
+02 00 1E
+02 00 1E
+02 00 1E
+
+// Confirm that CPU_rd_grant is asserted
+03 00 1E 00 01 ff ff
+
+// Read & check low part of RxTooShortTooLongCounter (0x0002)
+03 00 1F 00 02 ff ff
+
+// Read & check high part of RxTooShortTooLongCounter (0x0000)
+03 00 20 00 00 ff ff
+
+// Negate CPU_rd_apply
+01 00 1D 00 00
+
+
+// Halt
+FF
diff --git a/eth/bench/verilog/files.lst b/eth/bench/verilog/files.lst
new file mode 100644
index 000000000..6175a4d43
--- /dev/null
+++ b/eth/bench/verilog/files.lst
@@ -0,0 +1,42 @@
+../../rtl/verilog/MAC_rx/Broadcast_filter.v
+../../rtl/verilog/MAC_rx/CRC_chk.v
+../../rtl/verilog/MAC_rx/MAC_rx_add_chk.v
+../../rtl/verilog/MAC_rx/MAC_rx_ctrl.v
+../../rtl/verilog/MAC_rx/MAC_rx_FF.v
+
+../../rtl/verilog/MAC_tx/CRC_gen.v
+../../rtl/verilog/MAC_tx/flow_ctrl.v
+../../rtl/verilog/MAC_tx/MAC_tx_addr_add.v
+../../rtl/verilog/MAC_tx/MAC_tx_ctrl.v
+../../rtl/verilog/MAC_tx/MAC_tx_FF.v
+../../rtl/verilog/MAC_tx/Ramdon_gen.v
+
+../../rtl/verilog/miim/eth_clockgen.v
+../../rtl/verilog/miim/eth_outputcontrol.v
+../../rtl/verilog/miim/eth_shiftreg.v
+
+../../rtl/verilog/RMON/RMON_addr_gen.v
+../../rtl/verilog/RMON/RMON_ctrl.v
+../../rtl/verilog/RMON/RMON_dpram.v
+
+../../rtl/verilog/TECH/duram.v
+../../rtl/verilog/TECH/eth_clk_div2.v
+../../rtl/verilog/TECH/eth_clk_switch.v
+
+../../rtl/verilog/TECH/xilinx/BUFGMUX.v
+../../rtl/verilog/TECH/xilinx/RAMB16_S36_S36.v
+
+../../rtl/verilog/Clk_ctrl.v
+../../rtl/verilog/eth_miim.v
+../../rtl/verilog/MAC_rx.v
+../../rtl/verilog/MAC_top.v
+../../rtl/verilog/MAC_tx.v
+../../rtl/verilog/Phy_int.v
+../../rtl/verilog/Reg_int.v
+../../rtl/verilog/RMON.v
+
+../../bench/verilog/Phy_sim.v
+../../bench/verilog/User_int_sim.v
+../../bench/verilog/host_sim.v
+../../bench/verilog/xlnx_glbl.v
+../../bench/verilog/tb_top.v
diff --git a/eth/bench/verilog/host_sim.v b/eth/bench/verilog/host_sim.v
new file mode 100644
index 000000000..55abb8508
--- /dev/null
+++ b/eth/bench/verilog/host_sim.v
@@ -0,0 +1,82 @@
+module host_sim(
+ input Reset,
+ input Clk_reg,
+ output reg CSB,
+ output reg WRB,
+ output reg CPU_init_end,
+ output reg [15:0] CD_in,
+ input [15:0] CD_out,
+ output reg [7:0] CA
+);
+
+////////////////////////////////////////
+
+task CPU_init;
+ begin
+ CA = 0;
+ CD_in = 0;
+ WRB = 1;
+ CSB = 1;
+ end
+endtask
+
+////////////////////////////////////////
+
+task CPU_wr;
+ input [6:0] Addr;
+ input [15:0] Data;
+ begin
+ CA = {Addr,1'b0};
+ CD_in = Data;
+ WRB = 0;
+ CSB = 0;
+ #20;
+ CA = 0;
+ CD_in = 0;
+ WRB = 1;
+ CSB = 1;
+ #20;
+ end
+endtask
+
+/////////////////////////////////////////
+
+task CPU_rd;
+ input [6:0] Addr;
+ begin
+ CA = {Addr,1'b0};
+ WRB = 1;
+ CSB = 0;
+ #20;
+ CA = 0;
+ WRB = 1;
+ CSB = 1;
+ #20;
+ end
+endtask
+
+/////////////////////////////////////////
+
+integer i;
+
+reg [31:0] CPU_data [255:0];
+reg [7:0] write_times;
+reg [7:0] write_add;
+reg [15:0] write_data;
+
+initial
+ begin
+ CPU_init;
+ CPU_init_end=0;
+ //$readmemh("../data/CPU.vec",CPU_data);
+ //{write_times,write_add,write_data}=CPU_data[0];
+ {write_times,write_add,write_data}='b0;
+ #90;
+ for (i=0;i<write_times;i=i+1)
+ begin
+ {write_times,write_add,write_data}=CPU_data[i];
+ CPU_wr(write_add[6:0],write_data);
+ end
+ CPU_init_end=1;
+ end
+endmodule
diff --git a/eth/bench/verilog/icomp.bat b/eth/bench/verilog/icomp.bat
new file mode 100644
index 000000000..11e221e08
--- /dev/null
+++ b/eth/bench/verilog/icomp.bat
@@ -0,0 +1 @@
+iverilog -I ..\..\rtl\verilog -c files.lst
diff --git a/eth/bench/verilog/isim.bat b/eth/bench/verilog/isim.bat
new file mode 100644
index 000000000..e77969659
--- /dev/null
+++ b/eth/bench/verilog/isim.bat
@@ -0,0 +1 @@
+vvp a.out %*
diff --git a/eth/bench/verilog/jumbo_err.scr b/eth/bench/verilog/jumbo_err.scr
new file mode 100644
index 000000000..b0177f474
--- /dev/null
+++ b/eth/bench/verilog/jumbo_err.scr
@@ -0,0 +1,40 @@
+// This test performs transmission & reception of several Jumbo-frame of ~2Kbytes
+// In one of the frames an error is injected to allow analysis of how the
+// MAC Rx interface reacts to errors in long packets
+
+// Read from register 24 to confirm that Rx CRC check is enabled
+03 00 18 00 01 ff ff
+
+// Set speed to 1000 Mbps
+01 00 22 00 04
+
+// Setup Tx and Rx MAC addresses and type field to "IP"
+// Set Tx Data at offset 0, length 14 to 123456789ABC CBA987654321 0800
+10 00 00 00 0E 12 34 56 78 9A BC CB A9 87 65 43 21 08 00
+
+// Transmit a 2049-byte frame 2 times - and expect them to be received again!
+20 08 02 00 02
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+// Transmit a 2049-byte frame 1 time - but expect to receive it with error!
+25 08 02 00 01
+
+// Delay 256 NOPs to time the error injection to be late in the packet
+0F 01 00
+
+// Inject a single bit error in the packet (data bit 0)
+23 01 00
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+// Transmit a 2049-byte frame 2 times - and expect them to be received again!
+20 08 01 00 02
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+// Halt
+FF
diff --git a/eth/bench/verilog/jumbos.scr b/eth/bench/verilog/jumbos.scr
new file mode 100644
index 000000000..f48870bd5
--- /dev/null
+++ b/eth/bench/verilog/jumbos.scr
@@ -0,0 +1,27 @@
+// This test performs transmission & reception of several Jumbo-frames of ~2Kbytes each
+// At the same time it demonstrates the wire-speed capabilities of the core
+
+// Read from register 24 to confirm that Rx CRC check is enabled
+03 00 18 00 01 ff ff
+
+// Set speed to 1000 Mbps
+01 00 22 00 04
+
+// Setup Tx and Rx MAC addresses and type field to "IP"
+// Set Tx Data at offset 0, length 14 to 123456789ABC CBA987654321 0800
+10 00 00 00 0E 12 34 56 78 9A BC CB A9 87 65 43 21 08 00
+
+// Transmit a 2047-byte frame 3 times - and expect them to be received again!
+20 07 ff 00 03
+// Transmit a 2048-byte frame 3 times - and expect them to be received again!
+20 08 00 00 03
+// Transmit a 2049-byte frame 3 times - and expect them to be received again!
+20 08 01 00 03
+// Transmit a 2050-byte frame 3 times - and expect them to be received again!
+20 08 02 00 03
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+// Halt
+FF
diff --git a/eth/bench/verilog/mdio.scr b/eth/bench/verilog/mdio.scr
new file mode 100644
index 000000000..8ad9969b9
--- /dev/null
+++ b/eth/bench/verilog/mdio.scr
@@ -0,0 +1,52 @@
+// Read from register 24 to confirm that Rx CRC check is enabled
+03 00 18 00 01 ff ff
+
+// Set speed to 1000 Mbps
+01 00 22 00 04
+
+// Set MDIO clock (MDC) divider to 4 to speed up test
+01 00 23 00 04
+03 00 23 00 04 ff ff
+
+// Check default (reset) values in new (added) MDIO registers
+//03 00 23 00 64 ff ff
+03 00 24 00 00 ff ff
+03 00 25 00 00 ff ff
+03 00 26 00 00 ff ff
+03 00 27 00 00 ff ff
+03 00 28 00 00 ff ff
+
+// Set RGAD=0x00 (all zeroes), FIAD=0x1f (all ones), check it
+// - these values allows easy recognition in the waveform
+01 00 25 00 1f
+03 00 25 00 1f ff ff
+
+// Now start the read operation by writing a 1 to the MIICOMMAND[1] - RSTAT
+01 00 24 00 02
+03 00 24 00 02 ff ff
+
+// Delay for 768 NOP
+0F 03 00
+
+// Check that the read operation has completed
+03 00 28 00 00 ff ff
+
+// Set RGAD=0x1f (all ones), FIAD=0x00 (all zeroes), check it
+// - these values allows easy recognition in the waveform
+01 00 25 1f 00
+03 00 25 1f 00 ff ff
+// Set MIITX_DATA = 0xAAAA, check it
+01 00 26 AA AA
+03 00 26 AA AA ff ff
+// Check MIISTATUS - must still be zero
+03 00 28 00 00 ff ff
+
+// Now start the write operation by writing a 1 to the MIICOMMAND[2] - WCTRLDATA
+01 00 24 00 04
+03 00 24 00 04 ff ff
+
+// Delay for 768 NOP
+0F 03 00
+
+// Check that the write operation has completed
+03 00 28 00 00 ff ff
diff --git a/eth/bench/verilog/miim_model.v b/eth/bench/verilog/miim_model.v
new file mode 100644
index 000000000..936d99a80
--- /dev/null
+++ b/eth/bench/verilog/miim_model.v
@@ -0,0 +1,14 @@
+
+// Skeleton PHY interface simulator
+
+module miim_model(input mdc_i,
+ inout mdio,
+ input phy_resetn_i,
+ input phy_clk_i,
+ output phy_intn_o,
+ output [2:0] speed_o);
+
+ assign phy_intn_o = 1; // No interrupts
+ assign speed_o = 3'b100; // 1G mode
+
+endmodule // miim_model
diff --git a/eth/bench/verilog/misc.scr b/eth/bench/verilog/misc.scr
new file mode 100644
index 000000000..092362964
--- /dev/null
+++ b/eth/bench/verilog/misc.scr
@@ -0,0 +1,92 @@
+// Read from register 24 to confirm that Rx CRC check is enabled
+03 00 18 00 01 ff ff
+
+// Set speed to 1000 Mbps
+01 00 22 00 04
+
+// Write MAC address 12 35 56 78 9A BC to Rx Address buffer
+01 00 10 00 00
+01 00 0f 00 12
+01 00 11 00 01
+01 00 11 00 00
+01 00 10 00 01
+01 00 0f 00 34
+01 00 11 00 01
+01 00 11 00 00
+01 00 10 00 02
+01 00 0f 00 56
+01 00 11 00 01
+01 00 11 00 00
+01 00 10 00 03
+01 00 0f 00 78
+01 00 11 00 01
+01 00 11 00 00
+01 00 10 00 04
+01 00 0f 00 9A
+01 00 11 00 01
+01 00 11 00 00
+01 00 10 00 05
+01 00 0f 00 BC
+01 00 11 00 01
+01 00 11 00 00
+
+// Write 1 to register 14, MAC_rx_add_chk_en
+// This turns on the Rx Destination MAC address filter
+01 00 0e 00 01
+
+// Setup Tx and Rx MAC addresses and type field to "IP"
+// Set Tx Data at offset 0, length 14 to 123456789ABC CBA987654321 0800
+// (i.e. Destination MAC address is 123456789ABC matching the above)
+10 00 00 00 0E 12 34 56 78 9A BC CB A9 87 65 43 21 08 00
+
+// Transmit a 60-byte frame 1 time - and expect it to be received again!
+20 00 3C 00 01
+// Transmit a 61-byte frame 1 time - and expect it to be received again!
+20 00 3D 00 01
+// Transmit a 62-byte frame 1 time - and expect it to be received again!
+20 00 3E 00 01
+// Transmit a 63-byte frame 1 time - and expect it to be received again!
+20 00 3F 00 01
+// Transmit a 64-byte frame 1 time - and expect it to be received again!
+20 00 40 00 01
+
+// Transmit a 500-byte frame 1 time - and expect it to be received again!
+20 01 4C 00 01
+
+// Transmit a 1500-byte frame 1 time - and expect it to be received again!
+20 05 DC 00 01
+
+// Transmit a 1514-byte frame 1 time - and expect it to be received again!
+20 05 EA 00 01
+
+// Transmit a 60-byte frame 3 times - and expect them to be received again!
+20 00 3C 00 03
+// Transmit a 61-byte frame 3 times - and expect them to be received again!
+20 00 3D 00 03
+// Transmit a 62-byte frame 3 times - and expect them to be received again!
+20 00 3E 00 03
+// Transmit a 63-byte frame 3 times - and expect them to be received again!
+20 00 3F 00 03
+// Transmit a 64-byte frame 3 times - and expect them to be received again!
+20 00 40 00 03
+
+// Transmit a 1510-byte frame 1 time - and expect it to be received again!
+20 05 E6 00 01
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+// Change Tx MAC to something different - we won't receive frames with this ID
+10 00 00 00 06 11 22 33 44 55 66
+
+// Transmit a 60 byte frame 3 times - but don't expect them to be received!
+21 00 3C 00 03
+
+//// Change Tx MAC back to 12 34 56 78 9A BC
+10 00 00 00 06 12 34 56 78 9A BC
+
+// Transmit a 60 byte frame 3 times - and expect them to be received again!
+20 00 3C 00 03
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
diff --git a/eth/bench/verilog/pause.scr b/eth/bench/verilog/pause.scr
new file mode 100644
index 000000000..be74027e3
--- /dev/null
+++ b/eth/bench/verilog/pause.scr
@@ -0,0 +1,45 @@
+// This test demonstrates the ability to transmit a PAUSE frame, and the effect of
+// a PAUSE frame on the receiver
+
+// Read from register 24 to confirm that Rx CRC check is enabled
+03 00 18 00 01 ff ff
+
+// Set speed to 1000 Mbps
+01 00 22 00 04
+
+// Setup Tx and Rx MAC addresses and type field to "IP"
+// Set Tx Data at offset 0, length 14 to 123456789ABC CBA987654321 0800
+10 00 00 00 0E 12 34 56 78 9A BC CB A9 87 65 43 21 08 00
+
+// Set PAUSE quanta to 256 - corresponding to a pause of 256x512 = 128Kb = 16KB
+01 00 03 01 00
+
+// Enable the transmitter to send a PAUSE frame
+01 00 02 00 01
+
+// Enable the transmitter to react to received PAUSE frames
+01 00 0b 00 01
+
+// Expect to receive a PAUSE frame with quanta 256
+24 01 00
+
+// Transmit a 512-byte frame 1 time - and expect it to be received again!
+20 02 00 00 01
+
+// Request the transmission of a PAUSE frame - it will loopback to ourselves and delay
+// further transmission for a period of 16 KB, causing a significant (visible) delay
+// between first and second 512-byte frame!
+01 00 0c 00 01
+
+// - now this second time, we will experience a delay
+// Transmit a 512-byte frame 1 time - and expect it to be received again!
+20 02 00 00 01
+// - and a final 3rd time
+// Transmit a 512-byte frame 1 time - and expect it to be received again!
+20 02 00 00 01
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+// Halt
+FF
diff --git a/eth/bench/verilog/tb_top.v b/eth/bench/verilog/tb_top.v
new file mode 100644
index 000000000..e54bc201b
--- /dev/null
+++ b/eth/bench/verilog/tb_top.v
@@ -0,0 +1,1057 @@
+`timescale 1 ns / 1 ps
+
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// tb_top.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: tb_top.v,v $
+// Revision 1.3 2006/01/19 14:07:51 maverickist
+// verification is complete.
+//
+// Revision 1.2 2005/12/16 06:44:13 Administrator
+// replaced tab with space.
+// passed 9.6k length frame test.
+//
+// Revision 1.1.1.1 2005/12/13 01:51:44 Administrator
+// no message
+//
+
+module tb_top;
+
+ //-------------------- Instantiate Xilinx glbl module ----------------------
+ // - this is needed to get ModelSim to work because e.g. I/O buffer models
+ // refer directly to glbl.GTS and similar signals
+
+ wire GSR;
+ wire GTS;
+ xlnx_glbl glbl( .GSR( GSR ), .GTS( GTS ) );
+
+ reg VLOG_ExitSignal = 0;
+ reg Done = 0;
+ reg Error = 0;
+
+ //-------------------------------------------------------------------------
+
+ // System signals
+ wire Reset;
+ reg Clk_125M;
+ reg Clk_user;
+
+ reg RST_I;
+ reg CLK_I;
+ reg STB_I;
+ reg CYC_I;
+ reg [6:0] ADR_I;
+ reg WE_I;
+ reg [15:0] DAT_I;
+ wire [15:0] DAT_O;
+ wire ACK_O;
+
+ // User interface (Rx)
+ wire Rx_mac_ra;
+ reg Rx_mac_rd = 0;
+ wire [31:0] Rx_mac_data;
+ wire [1:0] Rx_mac_BE;
+ wire Rx_mac_pa;
+ wire Rx_mac_sop;
+ wire Rx_mac_err;
+ wire Rx_mac_eop;
+
+ // User interface (Tx)
+ wire Tx_mac_wa;
+ reg Tx_mac_wr = 0;
+ reg [31:0] Tx_mac_data = 32'bx;
+ reg [1:0] Tx_mac_BE = 2'bx;
+ reg Tx_mac_sop = 1'bx;
+ reg Tx_mac_eop = 1'bx;
+
+ // PHY interface (GMII/MII)
+ wire Gtx_clk;
+ wire Rx_clk;
+ wire Tx_clk;
+ wire Tx_er;
+ wire Tx_en;
+ wire [7:0] Txd;
+ wire Rx_er;
+ wire Rx_dv;
+ wire [7:0] Rxd;
+ wire Crs;
+ wire Col;
+
+ // PHY int host interface
+
+ wire Line_loop_en;
+ wire [2:0] Speed;
+
+ // MDIO interface
+ wire Mdio; // MII Management Data In
+ wire Mdc; // MII Management Data Clock
+
+ //-------------------------------------------------------------------------
+
+ // Generate generic reset signal from Wishbone specific one
+ assign Reset = RST_I;
+
+ MAC_top U_MAC_top(
+ // System signals
+ .Clk_125M ( Clk_125M ),
+ .Clk_user ( Clk_user ),
+ .Speed ( Speed ),
+
+ // Wishbone compliant core host interface
+ .RST_I ( RST_I ),
+ .CLK_I ( CLK_I ),
+ .STB_I ( STB_I ),
+ .CYC_I ( CYC_I ),
+ .ADR_I ( ADR_I ),
+ .WE_I ( WE_I ),
+ .DAT_I ( DAT_I ),
+ .DAT_O ( DAT_O ),
+ .ACK_O ( ACK_O ),
+
+ // User (packet) interface
+ .Rx_mac_ra ( Rx_mac_ra ),
+ .Rx_mac_rd ( Rx_mac_rd ),
+ .Rx_mac_data( Rx_mac_data ),
+ .Rx_mac_BE ( Rx_mac_BE ),
+ .Rx_mac_pa ( Rx_mac_pa ),
+ .Rx_mac_sop ( Rx_mac_sop ),
+ .Rx_mac_err ( Rx_mac_err ),
+ .Rx_mac_eop ( Rx_mac_eop ),
+
+ .Tx_mac_wa ( Tx_mac_wa ),
+ .Tx_mac_wr ( Tx_mac_wr ),
+ .Tx_mac_data( Tx_mac_data ),
+ .Tx_mac_BE ( Tx_mac_BE ),
+ .Tx_mac_sop ( Tx_mac_sop ),
+ .Tx_mac_eop ( Tx_mac_eop ),
+
+ // PHY interface (GMII/MII)
+ .Gtx_clk ( Gtx_clk ),
+ .Rx_clk ( Rx_clk ),
+ .Tx_clk ( Tx_clk ),
+ .Tx_er ( Tx_er ),
+ .Tx_en ( Tx_en ),
+ .Txd ( Txd ),
+ .Rx_er ( Rx_er ),
+ .Rx_dv ( Rx_dv ),
+ .Rxd ( Rxd ),
+ .Crs ( Crs ),
+ .Col ( Col ),
+
+ // MDIO interface (to PHY)
+ .Mdio ( Mdio ),
+ .Mdc ( Mdc )
+ );
+
+ reg [15:0] InjectError;
+ reg InjectErrorDone;
+ reg [15:0] TxError;
+ wire Tx_er_Modified;
+ wire Tx_en_Modified;
+ wire [7:0] Txd_Modified;
+
+ Phy_sim U_Phy_sim(
+ .Gtx_clk( Gtx_clk ),
+ .Rx_clk ( Rx_clk ),
+ .Tx_clk ( Tx_clk ),
+ .Tx_er ( Tx_er_Modified ),
+ .Tx_en ( Tx_en_Modified ),
+ .Txd ( Txd_Modified ),
+ .Rx_er ( Rx_er ),
+ .Rx_dv ( Rx_dv ),
+ .Rxd ( Rxd ),
+ .Crs ( Crs ),
+ .Col ( Col ),
+ .Speed ( Speed ),
+ .Done ( Done )
+ );
+
+ integer TxTrackPreAmble;
+
+ always @( posedge Reset or posedge Tx_clk )
+ if ( Reset )
+ TxTrackPreAmble <= 0;
+ else
+ if ( ~Tx_en )
+ TxTrackPreAmble <= 0;
+ else
+ TxTrackPreAmble <= TxTrackPreAmble + 1;
+
+ // Asserted after the Destination MAC address in the packet
+ wire TxInPayload = Tx_en & (TxTrackPreAmble > (7+6));
+ assign Tx_er_Modified = Tx_er ^ ( TxError[9] & TxInPayload );
+ assign Tx_en_Modified = Tx_en ^ ( TxError[8] & TxInPayload );
+ assign Txd_Modified = Txd ^ ( TxError[7:0] & {8{TxInPayload}} );
+
+ always @( posedge Reset or posedge Tx_clk )
+ if ( Reset )
+ begin
+ InjectError <= 0;
+ InjectErrorDone <= 0;
+ TxError <= 'b0;
+ end
+ else
+ if ( InjectError )
+ begin
+ TxError <= InjectError;
+ InjectError <= 0;
+ InjectErrorDone <= TxInPayload;
+ end
+ else if ( TxInPayload || InjectErrorDone )
+ begin
+ TxError <= 8'h00;
+ InjectErrorDone <= 0;
+ end
+
+ //-------------------------------------------------------------------------
+ // Track pause on Tx interface
+
+ reg TxEnSeenOnce;
+ integer TxTrackPause;
+
+ always @( posedge Reset or posedge Tx_clk )
+ if ( Reset )
+ begin
+ TxEnSeenOnce <= 0;
+ TxTrackPause <= 0;
+ end
+ else
+ if ( Tx_en )
+ begin
+ if ( TxEnSeenOnce && (TxTrackPause >= 64) ) // 512 bits
+ $display( "IDLE period on Tx interface ended after %0d Tx clocks (%0d bits, tick ~ %0d)",
+ TxTrackPause,
+ (Speed == 4) ? TxTrackPause*8 : TxTrackPause*4,
+ (Speed == 4) ? TxTrackPause*8/512 : TxTrackPause*4/512 );
+ TxEnSeenOnce <= 1;
+ TxTrackPause <= 0;
+ end
+ else
+ TxTrackPause <= TxTrackPause + 1;
+
+ //-------------------------------------------------------------------------
+ // Host access routines (register read & write)
+ //-------------------------------------------------------------------------
+
+ task HostInit;
+ begin
+ RST_I <= 1;
+
+ STB_I <= 0;
+ CYC_I <= 0;
+ ADR_I <= 'b0;
+ WE_I <= 0;
+ DAT_I <= 'b0;
+
+ #100 RST_I <= 0;
+
+ // Wait a couple of clock edges before continuing to allow
+ // internal logic to get out of reset
+ repeat( 2 )
+ @( posedge CLK_I );
+ end
+ endtask
+
+ task HostWriteReg;
+ input [6:0] Addr;
+ input [15:0] Data;
+ begin
+ @( posedge CLK_I );
+ ADR_I <= Addr;
+ DAT_I <= Data;
+ WE_I <= 1;
+ STB_I <= 1;
+ CYC_I <= 1;
+
+ @( posedge CLK_I );
+
+ while ( ~ACK_O )
+ @( posedge CLK_I );
+
+ STB_I <= 0;
+ CYC_I <= 0;
+ end
+ endtask
+
+ task HostReadReg;
+ input [6:0] Addr;
+ output [15:0] Data;
+ begin
+ @( posedge CLK_I );
+ ADR_I <= Addr;
+ WE_I <= 0;
+ STB_I <= 1;
+ CYC_I <= 1;
+
+ @( posedge CLK_I );
+
+ while ( ~ACK_O )
+ @( posedge CLK_I );
+
+ Data = DAT_O;
+ STB_I <= 0;
+ CYC_I <= 0;
+ end
+ endtask
+
+ //-------------------------------------------------------------------------
+ // User interface access routines (packet Tx and Rx)
+ //-------------------------------------------------------------------------
+
+ `define FIFOSIZE 10000
+
+ integer FIFO_WrPtr = 0;
+ integer FIFO_RdPtr = 0;
+ integer FIFO_ElementCount = 0;
+ reg [35:0] FIFO_Data[0:`FIFOSIZE];
+
+ function FIFO_Empty;
+ input Dummy;
+ begin
+ if ( FIFO_ElementCount > 0 )
+ FIFO_Empty = 0;
+ else
+ FIFO_Empty = 1;
+ end
+ endfunction
+
+ function FIFO_Full;
+ input Dummy;
+ begin
+ if ( FIFO_ElementCount < `FIFOSIZE )
+ FIFO_Full = 0;
+ else
+ FIFO_Full = 1;
+ end
+ endfunction
+
+ task FIFO_Wr;
+ input [35:0] Data;
+
+ begin
+ if ( !FIFO_Full(0) )
+ begin
+ FIFO_Data[ FIFO_WrPtr ] = Data;
+ FIFO_WrPtr = (FIFO_WrPtr + 1) % `FIFOSIZE;
+ FIFO_ElementCount = FIFO_ElementCount + 1;
+ end
+ else
+ begin
+ $display( "ERROR: FIFO_Wr() - FIFO overflow!" );
+ Error = 1;
+ $finish;
+ end
+ end
+ endtask
+
+ task FIFO_Rd;
+ output [35:0] Data;
+
+ begin
+ if ( !FIFO_Empty(0) )
+ begin
+ Data = FIFO_Data[ FIFO_RdPtr ];
+ FIFO_RdPtr = (FIFO_RdPtr + 1) % `FIFOSIZE;
+ FIFO_ElementCount = FIFO_ElementCount - 1;
+ end
+ else
+ begin
+ $display( "ERROR: FIFO_Rd() - Reading from empty FIFO!" );
+ Error = 1;
+ $finish;
+ end
+ end
+ endtask
+
+ //-------------------------------------------------------------------------
+
+ `define TXDATALEN 8000
+ reg [7:0] TxData[0:`TXDATALEN-1];
+ reg [7:0] TxAltData[0:`TXDATALEN-1];
+
+ // By default change payload after Ethernet Header
+ reg [15:0] TxHeaderLength = 14;
+
+ real TxStartTime;
+ integer TxPacketCount = 0;
+ integer TxByteCount;
+
+ task SendPacket;
+ input [15:0] Length;
+ // 0: Don't write to FIFO, 1: Write to FIFO, 2: Write Alternate to FIFO, 3: Write IGNORE to FIFO
+ input [1:0] Wr2FIFO;
+
+ reg [15:0] Counter;
+ integer TxIndex;
+ integer i;
+
+ reg [31:0] Tx_fifo_data;
+
+ begin
+ @( posedge Clk_user ); #1;
+
+ TxPacketCount = TxPacketCount + 1;
+ TxByteCount = TxByteCount + Length;
+
+ Counter=Length;
+ TxIndex = 0;
+ Tx_mac_sop = 1; // First time
+
+ if ( TxStartTime == 0 )
+ TxStartTime = $realtime;
+
+ while ( Counter>0 )
+ begin
+ while ( !Tx_mac_wa )
+ begin
+ Tx_mac_wr = 0;
+ @( posedge Clk_user ); #1;
+ end
+
+ Tx_mac_data[31:24] = TxData[ TxIndex ];
+ Tx_mac_data[23:16] = TxData[ TxIndex+1 ];
+ Tx_mac_data[15:8] = TxData[ TxIndex+2 ];
+ Tx_mac_data[ 7:0] = TxData[ TxIndex+3 ];
+
+ // Default take data from regular tx buffer
+ Tx_fifo_data = Tx_mac_data;
+ if ( Wr2FIFO==2 )
+ begin
+ // Put content of Alternate Tx buffer on Rx expectancy queue
+ if ( (TxIndex+0)<TxHeaderLength )
+ Tx_fifo_data[31:24] = TxAltData[ TxIndex ];
+ if ( (TxIndex+1)<TxHeaderLength )
+ Tx_fifo_data[23:16] = TxAltData[ TxIndex+1 ];
+ if ( (TxIndex+2)<TxHeaderLength )
+ Tx_fifo_data[15:8] = TxAltData[ TxIndex+2 ];
+ if ( (TxIndex+3)<TxHeaderLength )
+ Tx_fifo_data[ 7:0] = TxAltData[ TxIndex+3 ];
+ end
+
+ for ( i=0; i<4; i=i+1 )
+ begin
+ if ( TxIndex >= TxHeaderLength )
+ TxData[ TxIndex ] = TxData[ TxIndex ] + 1;
+ TxIndex = TxIndex+1;
+ end
+
+ if ( Counter<=4 )
+ begin
+ // Indicate how many bytes are valid
+ if ( Counter==4 )
+ Tx_mac_BE = 2'b00;
+ else
+ Tx_mac_BE = Counter;
+ Tx_mac_eop = 1;
+ end
+ else
+ begin
+ Tx_mac_BE = 2'b00;
+ Tx_mac_eop = 0;
+ end
+
+ casez ( Wr2FIFO )
+ 1,
+ 2: FIFO_Wr( { Tx_mac_sop, Tx_mac_eop, Tx_mac_BE, Tx_fifo_data } );
+ 3: // Ignore
+ begin
+ FIFO_Wr( { 2'b11, 2'b00, 32'h00000000 } );
+ Wr2FIFO = 0;
+ end
+ endcase
+
+ Tx_mac_wr = 1;
+
+ if ( Counter >= 4 )
+ Counter = Counter - 4;
+ else
+ Counter = 0;
+ @( posedge Clk_user ); #1;
+ Tx_mac_sop = 0;
+ end
+
+ Tx_mac_sop = 1'bx;
+ Tx_mac_eop = 1'bx;
+ Tx_mac_wr = 0;
+ Tx_mac_data = 32'bx;
+ Tx_mac_BE = 2'bx;
+ end
+ endtask
+
+ //-------------------------------------------------------------------------
+
+ reg Negate_Rx_mac_rd;
+
+ always @( posedge Clk_user or posedge Reset )
+ if ( Reset )
+ Rx_mac_rd <= 0;
+ else if ( Rx_mac_ra & ~Negate_Rx_mac_rd )
+ Rx_mac_rd <= 1;
+ else
+ Rx_mac_rd <= 0;
+
+ real RxStartTime;
+ integer RxPacketCount;
+ integer RxByteCount;
+
+ reg InPacket;
+ integer RxPacketLength;
+ reg IgnoreUntilNextERR;
+
+ always @( posedge Clk_user or posedge Reset )
+ if ( Reset )
+ begin
+ InPacket = 0;
+ RxPacketCount = 0;
+ Negate_Rx_mac_rd <= 0;
+ IgnoreUntilNextERR = 0;
+ end
+ else
+ begin
+ Negate_Rx_mac_rd <= 0;
+
+ if ( Rx_mac_pa )
+ begin : RxWord
+ reg [35:0] RxData;
+ reg [35:0] Expected;
+ reg [35:0] Mask;
+
+ RxData = { Rx_mac_sop, Rx_mac_eop, Rx_mac_BE, Rx_mac_data };
+ casez ( Rx_mac_BE )
+ 2'b01: Mask = 36'hfff000000;
+ 2'b10: Mask = 36'hfffff0000;
+ 2'b11: Mask = 36'hfffffff00;
+ default: Mask = 36'hfffffffff;
+ endcase
+
+ // Retrieve expected packet data
+
+ if ( !IgnoreUntilNextERR )
+ begin
+ FIFO_Rd( Expected );
+ if ( Expected[35] & Expected[34] )
+ begin
+ // Both SOP & EOP are asserted in expectancy data
+ // - this means that we should ignore all data received until next EOP
+ $display( "The payload of this packet will be IGNORED - and an ERROR must be signalled!" );
+ IgnoreUntilNextERR = 1;
+ end
+ end
+ if ( IgnoreUntilNextERR )
+ Mask = 36'h000000000;
+
+ //$display( "DEBUG: RxData=0x%0x, Expected=0x%0x", RxData, Expected );
+
+ if ( (RxData & Mask) !== (Expected & Mask) )
+ begin
+ $display( "ERROR: Receiving unexpected packet data: Got 0x%0x, expected 0x%0x (Mask=0x%0x)",
+ RxData, Expected, Mask );
+ Error = 1;
+ end
+
+ if ( InPacket )
+ begin
+ if ( Rx_mac_eop )
+ begin
+ // Ensure Rx_mac_rd is negated for one clock
+ Negate_Rx_mac_rd <= 1;
+ if ( Rx_mac_BE==2'b00 )
+ RxPacketLength = RxPacketLength + 4;
+ else
+ RxPacketLength = RxPacketLength + Rx_mac_BE;
+ $display( "Rx packet #%0d of length %0d ends",
+ RxPacketCount,
+ RxPacketLength );
+ RxPacketCount = RxPacketCount + 1;
+ RxByteCount = RxByteCount + RxPacketLength;
+ InPacket = 0;
+ end
+ else
+ RxPacketLength = RxPacketLength + 4;
+ end
+ else
+ begin
+ if ( Rx_mac_sop )
+ begin
+ RxPacketLength = 4;
+ $display( "Rx packet #%0d begins: 0x%08x", RxPacketCount, Rx_mac_data );
+ InPacket = 1;
+ if ( RxStartTime == 0 )
+ RxStartTime = $realtime;
+ end
+ else
+ begin
+ $display( "ERROR: Unexpectedly reading from Rx FIFO while not receiving a packet!" );
+ Error = 1;
+ end
+ end
+
+ if ( Rx_mac_err )
+ begin
+ if ( !Rx_mac_eop )
+ begin
+ $display( "ERROR: Rx_mac_err was asserted without Rx_mac_eop also being asserted!" );
+ Error = 1;
+ end
+ if ( IgnoreUntilNextERR )
+ $display( "Info: Rx_mac_err was asserted as expected!" );
+ else
+ begin
+ $display( "ERROR: Rx_mac_err was unexpectedly asserted!" );
+ Error = 1;
+ end
+ IgnoreUntilNextERR = 0;
+ end
+ end
+ end
+
+ //-------------------------------------------------------------------------
+ // Script handling
+ //-------------------------------------------------------------------------
+
+ integer PC;
+
+ task ScriptWriteReg;
+ input [15:0] Addr;
+ input [15:0] Data;
+
+ begin
+ $display( "WriteReg( 0x%04x, 0x%04x )", Addr, Data );
+ HostWriteReg( Addr, Data );
+ end
+ endtask
+
+ task ScriptReadReg;
+ input [15:0] Addr;
+
+ reg [15:0] Data;
+
+ begin
+ $write( "ReadReg( 0x%04x ): ", Addr );
+ HostReadReg( Addr, Data );
+ $display( "0x%04x", Data );
+ end
+ endtask
+
+ task ScriptReadRegAndMatch;
+ input [15:0] Addr;
+ input [15:0] Data;
+ input [15:0] Mask;
+
+ reg [15:0] Read;
+
+ begin
+ $write( "ReadRegAndMatch( 0x%04x, 0x%04x, 0x%04x ): ", Addr, Data, Mask );
+
+ HostReadReg( Addr, Read );
+ $display( "0x%04x, masked=0x%04x", Read, Read & Mask );
+
+ if ( Data !== (Read & Mask) )
+ begin
+ $display( "Error: Unexpected data read" );
+ Error = 1;
+ end
+ end
+ endtask
+
+ integer RxExpectPacketCount = 0;
+
+ task ScriptSendPacket;
+ input [15:0] Length;
+ // 0: Don't receive, 1: Receive & match, 2: Receive & match alternate, 3: Receive & ignore
+ input [1:0] ExpectToRx;
+
+ begin
+ $display( "ScriptSendPacket( 0x%04x, %0d )", Length, ExpectToRx );
+ SendPacket( Length, ExpectToRx );
+ if ( ExpectToRx != 0 )
+ RxExpectPacketCount = RxExpectPacketCount + 1;
+ end
+ endtask
+
+ `define SCRIPTLEN 10000
+ integer i;
+ reg [7:0] Script[0:`SCRIPTLEN-1];
+
+ function [15:0] Get16bit;
+ input Dummy;
+
+ reg [15:0] Data;
+
+ begin
+ Data[15:8] = Script[PC];
+ Data[7:0] = Script[PC+1];
+ PC = PC+2;
+
+ Get16bit = Data;
+ end
+ endfunction
+
+ task ExecuteScript;
+
+ reg [7:0] OpCode;
+ reg [15:0] Addr;
+ reg [15:0] Data;
+ reg [15:0] Length;
+ reg [15:0] Count;
+ reg [15:0] Mask;
+
+ reg ScriptDone;
+
+ begin
+ ScriptDone = 0;
+ Error = 0;
+ PC = 0;
+
+ while ( !ScriptDone )
+ begin
+ OpCode = Script[PC];
+ //$write( "PC=%0d, OpCode=%02x: ", PC, OpCode );
+ PC = PC+1;
+
+ casez ( OpCode )
+ 8'h00: // NOP
+ begin
+// $display( "NOP" );
+ #10;
+ end
+ 8'h01: // Write
+ begin
+ Addr = Get16bit(i);
+ Data = Get16bit(i);
+ ScriptWriteReg( Addr, Data );
+ end
+ 8'h02: // Read
+ begin
+ Addr = Get16bit(i);
+ ScriptReadReg( Addr );
+ end
+ 8'h03: // Read & match
+ begin
+ Addr = Get16bit(i);
+ Data = Get16bit(i);
+ Mask = Get16bit(i);
+ ScriptReadRegAndMatch( Addr, Data, Mask );
+ end
+
+ 8'h0f: // Delay
+ begin
+ Count = Get16bit(i);
+ $display( "Delay %0d", Count );
+ while ( Count > 0 )
+ begin
+ #10;
+ Count = Count - 1;
+ end
+ end
+
+ 8'h10: // Setup Tx Data
+ begin
+ Addr = Get16bit(i);
+ Length = Get16bit(i);
+ $write( "TxData( 0x%04x ), length=%0d: ", Addr, Length );
+ while ( Length != 0 )
+ begin
+ TxData[Addr] = Script[PC];
+ $write( " 0x%02x", Script[PC] );
+ PC = PC + 1;
+ Addr = Addr + 1;
+ Length = Length - 1;
+ end
+ $display( "" );
+ end
+
+ 8'h11: // Setup Alternative Tx Data
+ begin
+ Addr = Get16bit(i);
+ Length = Get16bit(i);
+ $write( "TxAltData( 0x%04x ), length=%0d: ", Addr, Length );
+ while ( Length != 0 )
+ begin
+ TxAltData[Addr] = Script[PC];
+ $write( " 0x%02x", Script[PC] );
+ PC = PC + 1;
+ Addr = Addr + 1;
+ Length = Length - 1;
+ end
+ $display( "" );
+ end
+
+ 8'h20: // Transmit packet - and put it on Rx expectancy queue
+ begin
+ Length = Get16bit(i); // Length in bytes
+ Count = Get16bit(i); // Number of times
+ while ( Count != 0 )
+ begin
+ ScriptSendPacket( Length, 1 );
+ Count = Count - 1;
+ end
+ end
+
+ 8'h21: // Transmit packet - but DON'T put it on Rx expectancy queue
+ begin
+ Length = Get16bit(i); // Length in bytes
+ Count = Get16bit(i); // Number of times
+ while ( Count != 0 )
+ begin
+ ScriptSendPacket( Length, 0 );
+ Count = Count - 1;
+ end
+ end
+
+ 8'h22: // Wait
+ begin : OpCode22
+ reg NoTimeOut;
+ Count = Get16bit(i); // Timeout in ns
+ if ( Count==0 )
+ NoTimeOut = 1;
+ else
+ NoTimeOut = 0;
+
+ $display( "Waiting for # of Rx packets = # of Tx packets..." );
+ $display( "Timeout = %0d ns - Current # Rx =%0d, Expected=%0d",
+ Count, RxPacketCount, RxExpectPacketCount );
+
+ while( (NoTimeOut || (Count != 0)) && ( RxExpectPacketCount != RxPacketCount ) && !Error )
+ begin
+ #1;
+ if ( !NoTimeOut )
+ Count = Count - 1;
+ //$display( "NoTimeOut=%0d, Count=%0d", NoTimeOut, Count );
+ end
+
+ if ( !Error )
+ if ( RxExpectPacketCount != RxPacketCount )
+ begin
+ $display( "ERROR: Timeout waiting for Rx packet(s)!" );
+ ScriptDone = 1;
+ Error = 1;
+ end
+ else
+ $display( "...Done waiting (time remaining = %0d ns)!", Count );
+ end
+
+ 8'h23: // Inject bit error in Tx packet
+ begin
+ InjectError = Get16bit(i); // Get bit error pattern
+ $display( "Injecting a single bit-error in Tx packet: TxEr=%0d, TxEn=%0d, TxD=0x%02h (0x%03h)",
+ InjectError[9], InjectError[8], InjectError[7:0], InjectError );
+ end
+
+ 8'h24: // Store internally generated PAUSE frame in Rx expect queue
+ begin
+ Count = Get16bit(i); // Timeout in ns
+ $display( "Generating PAUSE frame (tick=%0d) on Rx expect queue", Count );
+ RxExpectPacketCount = RxExpectPacketCount + 1;
+ FIFO_Wr( { 1'b1, 1'b0, 2'b00, 32'h0180c200 } );
+ FIFO_Wr( { 1'b0, 1'b0, 2'b00, 16'h0001, 16'h0000 } );
+ FIFO_Wr( { 1'b0, 1'b0, 2'b00, 32'h00000000 } );
+ FIFO_Wr( { 1'b0, 1'b0, 2'b00, 32'h88080001 } );
+ FIFO_Wr( { 1'b0, 1'b0, 2'b00, Count, 16'h0000 } );
+ FIFO_Wr( { 1'b0, 1'b0, 2'b00, 32'h00000000 } );
+ FIFO_Wr( { 1'b0, 1'b0, 2'b00, 32'h00000000 } );
+ FIFO_Wr( { 1'b0, 1'b0, 2'b00, 32'h00000000 } );
+ FIFO_Wr( { 1'b0, 1'b0, 2'b00, 32'h00000000 } );
+ FIFO_Wr( { 1'b0, 1'b0, 2'b00, 32'h00000000 } );
+ FIFO_Wr( { 1'b0, 1'b0, 2'b00, 32'h00000000 } );
+ FIFO_Wr( { 1'b0, 1'b0, 2'b00, 32'h00000000 } );
+ FIFO_Wr( { 1'b0, 1'b0, 2'b00, 32'h00000000 } );
+ FIFO_Wr( { 1'b0, 1'b0, 2'b00, 32'h00000000 } );
+ FIFO_Wr( { 1'b0, 1'b1, 2'b00, 32'h00000000 } );
+ end
+
+ 8'h25: // Transmit packet - and indicate that it must be IGNORED upon reception
+ begin
+ Length = Get16bit(i); // Length in bytes
+ Count = Get16bit(i); // Number of times
+ while ( Count != 0 )
+ begin
+ ScriptSendPacket( Length, 3 );
+ Count = Count - 1;
+ end
+ end
+
+ 8'h26: // Transmit packet - and put it on expectancy queue with Alternate header!
+ begin
+ Length = Get16bit(i); // Length in bytes
+ Count = Get16bit(i); // Number of times
+ while ( Count != 0 )
+ begin
+ ScriptSendPacket( Length, 2 );
+ Count = Count - 1;
+ end
+ end
+
+ 8'hff: // Halt
+ begin
+ $display( "HALT" );
+ ScriptDone = 1;
+ Done = 1;
+ end
+
+ default: // Unknown opcode
+ begin
+ $display( "Unknown instruction encountered @ PC=%0d: OpCode=0x%02x", PC-1, OpCode );
+ Error = 1;
+ end
+
+ endcase
+
+ if ( Error )
+ begin
+ ScriptDone = 1;
+ Done = 1;
+ end
+ end
+
+ if ( Error )
+ $display( "ERROR: Test failed!");
+ else
+ begin : ScriptSuccess
+ real TxTimeElapsed;
+ real RxTimeElapsed;
+ real ReferenceTime;
+
+ ReferenceTime = $realtime;
+ #1;
+ ReferenceTime = $realtime - ReferenceTime;
+
+ TxTimeElapsed = $realtime - TxStartTime;
+ RxTimeElapsed = $realtime - RxStartTime;
+
+ $display( "TxStartTime=%0e, Now=%0e", TxStartTime, $realtime );
+ $display( "RxStartTime=%0e, Now=%0e", RxStartTime, $realtime );
+
+ $display( "Tx stats: %0d packet(s) send, total of %0d bytes in %0e ns ~ %1.2f Mbps",
+ TxPacketCount, TxByteCount, TxTimeElapsed, TxByteCount*8*1e3/TxTimeElapsed );
+ $display( "Rx stats: %0d packet(s) received, total of %0d bytes in %0e ns ~ %1.2f Mbps",
+ RxPacketCount, RxByteCount, RxTimeElapsed, RxByteCount*8*1e3/RxTimeElapsed );
+ $display( "Test succeeded!");
+ end
+
+ end
+ endtask
+
+ //-------------------------------------------------------------------------
+ // Generate all clocks
+ //-------------------------------------------------------------------------
+
+ // GMII master clock (125 MHz)
+ initial
+ begin
+ #10;
+ while ( !Done )
+ begin
+ #4 Clk_125M = 0;
+ #4 Clk_125M = 1;
+ end
+ end
+
+ // User (packet) interface clock (100 MHz)
+ initial
+ begin
+ #10;
+ while ( !Done )
+ begin
+ #5 Clk_user = 0;
+ #5 Clk_user = 1;
+ end
+ end
+
+ // Wishbone host interface clock (50 MHz)
+ initial
+ begin
+ #10;
+ while ( !Done )
+ begin
+ #10 CLK_I = 0;
+ #10 CLK_I = 1;
+ end
+ end
+
+ //-------------------------------------------------------------------------
+
+ initial
+ begin
+ if ( $test$plusargs( "vcd" ) )
+ begin
+ $display( "Turning VCD data dump on" );
+ $dumpfile();
+ $dumpvars( 0 ); // Dump all signals in entire design
+ end
+ end
+
+ //-------------------------------------------------------------------------
+
+ reg [1023:0] ScriptFile;
+
+ initial
+ begin
+ HostInit;
+
+ TxStartTime = 0;
+ RxStartTime = 0;
+ TxByteCount = 0;
+ RxByteCount = 0;
+
+ for ( i=0; i<`TXDATALEN; i=i+1 )
+ TxData[i] = (i & 8'hff);
+
+ // Fill script memory with HALTs
+ for ( i=0; i<`SCRIPTLEN; i=i+1 )
+ Script[i] = 8'hff;
+
+ if ( !$value$plusargs( "script=%s", ScriptFile ) )
+ begin
+ $display( "Using default script file" );
+ ScriptFile = "test.scr";
+ end
+
+ $readmemh( ScriptFile, Script );
+
+// for ( i=0; i<40; i=i+1 )
+// $display( "Script[%0d]=0x%02x", i, Script[i] );
+
+ #10;
+
+ ExecuteScript;
+ end
+
+endmodule
diff --git a/eth/bench/verilog/test.scr b/eth/bench/verilog/test.scr
new file mode 100644
index 000000000..2ad127d31
--- /dev/null
+++ b/eth/bench/verilog/test.scr
@@ -0,0 +1,23 @@
+// This tests just runs trough a couple of different packet lengths
+
+// Read from register 24 to confirm that Rx CRC check is enabled
+03 00 18 00 01 ff ff
+
+// Set speed to 1000 Mbps
+01 00 22 00 04
+
+// Setup Tx and Rx MAC addresses and type field to "IP"
+// Set Tx Data at offset 0, length 14 to 123456789ABC CBA987654321 0800
+10 00 00 00 0E 12 34 56 78 9A BC CB A9 87 65 43 21 08 00
+
+// Transmit a 320-byte frame 1 time - and expect it to be received again!
+20 01 40 00 01
+
+// Transmit a 80-byte frame 1 time - and expect it to be received again!
+20 00 50 00 01
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+// Halt
+FF
diff --git a/eth/bench/verilog/txmac.scr b/eth/bench/verilog/txmac.scr
new file mode 100644
index 000000000..caa7db594
--- /dev/null
+++ b/eth/bench/verilog/txmac.scr
@@ -0,0 +1,93 @@
+// Read from register 24 to confirm that Rx CRC check is enabled
+03 00 18 00 01 ff ff
+
+// Set speed to 1000 Mbps
+01 00 22 00 04
+
+// Write MAC address 12 35 56 78 9A BC to Rx Address buffer
+01 00 10 00 00
+01 00 0f 00 12
+01 00 11 00 01
+01 00 11 00 00
+01 00 10 00 01
+01 00 0f 00 34
+01 00 11 00 01
+01 00 11 00 00
+01 00 10 00 02
+01 00 0f 00 56
+01 00 11 00 01
+01 00 11 00 00
+01 00 10 00 03
+01 00 0f 00 78
+01 00 11 00 01
+01 00 11 00 00
+01 00 10 00 04
+01 00 0f 00 9A
+01 00 11 00 01
+01 00 11 00 00
+01 00 10 00 05
+01 00 0f 00 BC
+01 00 11 00 01
+01 00 11 00 00
+
+// Write 1 to register 14, MAC_rx_add_chk_en
+// This turns on the Rx Destination MAC address filter
+01 00 0e 00 01
+
+// Setup Tx and Rx MAC addresses and type field to "IP"
+// Set Tx Data at offset 0, length 14 to 123456789ABC CBA987654321 0800
+// (i.e. Destination MAC address is 123456789ABC matching the above)
+10 00 00 00 0E 12 34 56 78 9A BC CB A9 87 65 43 21 08 00
+
+// Setup Alternate Tx and Rx MAC addresses and type field to "IP"
+// Set Tx Data at offset 0, length 14 to 123456789ABC 112233445566 0800
+// (i.e. Destination MAC address is 123456789ABC matching the above)
+11 00 00 00 0E 12 34 56 78 9A BC 11 22 33 44 55 66 08 00
+
+// Transmit a 60-byte frame 3 times - and expect them to be received again!
+20 00 3C 00 03
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+// Write MAC address 11 22 33 44 55 66 to Tx MAC Source Address buffer
+01 00 09 00 00
+01 00 08 00 11
+01 00 0a 00 01
+01 00 0a 00 00
+01 00 09 00 01
+01 00 08 00 22
+01 00 0a 00 01
+01 00 0a 00 00
+01 00 09 00 02
+01 00 08 00 33
+01 00 0a 00 01
+01 00 0a 00 00
+01 00 09 00 03
+01 00 08 00 44
+01 00 0a 00 01
+01 00 0a 00 00
+01 00 09 00 04
+01 00 08 00 55
+01 00 0a 00 01
+01 00 0a 00 00
+01 00 09 00 05
+01 00 08 00 66
+01 00 0a 00 01
+01 00 0a 00 00
+
+// Transmit a 60 byte frame 3 times - and expect them to be received again!
+20 00 3C 00 03
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
+
+// Write 1 to register 7, MAC_tx_add_en
+// This turns on the Tx Source MAC address replacement mechanism
+01 00 07 00 01
+
+// Transmit a 60 byte frame 3 times - and expect them to be received again with Alternate header!
+26 00 3C 00 03
+
+// Wait (indefinitely) for missing Rx packets
+22 00 00
diff --git a/eth/bench/verilog/xlnx_glbl.v b/eth/bench/verilog/xlnx_glbl.v
new file mode 100644
index 000000000..662a60e35
--- /dev/null
+++ b/eth/bench/verilog/xlnx_glbl.v
@@ -0,0 +1,29 @@
+module xlnx_glbl
+(
+ GSR,
+ GTS
+);
+
+ //--------------------------------------------------------------------------
+ // Parameters
+ //--------------------------------------------------------------------------
+
+ //--------------------------------------------------------------------------
+ // IO declarations
+ //--------------------------------------------------------------------------
+
+ output GSR;
+ output GTS;
+
+ //--------------------------------------------------------------------------
+ // Local declarations
+ //--------------------------------------------------------------------------
+
+ //--------------------------------------------------------------------------
+ // Internal declarations
+ //--------------------------------------------------------------------------
+
+ assign GSR = 0;
+ assign GTS = 0;
+
+endmodule
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-20 16:41:55 +0000