diff options
Diffstat (limited to 'eth/bench/verilog/Phy_sim.v')
| -rw-r--r-- | eth/bench/verilog/Phy_sim.v | 113 |
1 files changed, 113 insertions, 0 deletions
diff --git a/eth/bench/verilog/Phy_sim.v b/eth/bench/verilog/Phy_sim.v new file mode 100644 index 000000000..f51ddbd82 --- /dev/null +++ b/eth/bench/verilog/Phy_sim.v @@ -0,0 +1,113 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// Phy_sim.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: Phy_sim.v,v $
+// Revision 1.3 2006/11/17 17:53:07 maverickist
+// no message
+//
+// Revision 1.2 2006/01/19 14:07:50 maverickist
+// verification is complete.
+//
+// Revision 1.1.1.1 2005/12/13 01:51:44 Administrator
+// no message
+//
+
+`timescale 1ns/100ps
+
+module Phy_sim(
+ input Gtx_clk, // Used only in GMII mode
+ output Rx_clk,
+ output Tx_clk, // Used only in MII mode
+ input Tx_er,
+ input Tx_en,
+ input [7:0] Txd,
+ output Rx_er,
+ output Rx_dv,
+ output [7:0] Rxd,
+ output Crs,
+ output Col,
+ input [2:0] Speed,
+ input Done
+);
+
+//////////////////////////////////////////////////////////////////////
+// this file used to simulate Phy.
+// generate clk and loop the Tx data to Rx data
+// full duplex mode can be verified on loop mode.
+//////////////////////////////////////////////////////////////////////
+//////////////////////////////////////////////////////////////////////
+// internal signals
+//////////////////////////////////////////////////////////////////////
+reg Clk_25m; // Used for 100 Mbps mode
+reg Clk_2_5m; // Used for 10 Mbps mode
+
+//wire Rx_clk;
+//wire Tx_clk; // Used only in MII mode
+
+ initial
+ begin
+ #10;
+ while ( !Done )
+ begin
+ #20 Clk_25m = 0;
+ #20 Clk_25m = 1;
+ end
+ end
+
+ initial
+ begin
+ #10;
+ while ( !Done )
+ begin
+ #200 Clk_2_5m = 0;
+ #200 Clk_2_5m = 1;
+ end
+ end
+
+ assign Rx_clk = Speed[2] ? Gtx_clk : Speed[1] ? Clk_25m : Speed[0] ? Clk_2_5m : 0;
+ assign Tx_clk = Speed[2] ? Gtx_clk : Speed[1] ? Clk_25m : Speed[0] ? Clk_2_5m : 0;
+
+ assign Rx_dv = Tx_en;
+ assign Rxd = Txd;
+ assign Rx_er = Tx_er;
+ assign Crs = Tx_en;
+ assign Col = 0;
+
+endmodule
|