aboutsummaryrefslogtreecommitdiffstats
path: root/src
Commit message (Expand)AuthorAgeFilesLines
* Show ALIM and TEMP independently of GPS timeMatthias P. Braendli2019-06-231-12/+11
* Revert "Switch debug UART to 115200" and set it to 9600 againMatthias P. Braendli2019-06-191-1/+1
* Fix tone LED in code and schematicsMatthias P. Braendli2019-05-102-5/+7
* Remove TODO warningsMatthias P. Braendli2019-05-102-3/+1
* Fix codestr uninitialised warningMatthias P. Braendli2019-05-101-1/+1
* Increase DTMF interval to 2.5sMatthias P. Braendli2019-05-101-1/+1
* Show DAC SR when spurious TIM DAC ISR occursMatthias P. Braendli2019-05-101-1/+3
* Implement 5s 1750 to disable FAXMatthias P. Braendli2019-05-105-5/+25
* Fix SQ2 output to 0Matthias P. Braendli2019-05-101-2/+4
* Modify orange LED usageMatthias P. Braendli2019-05-101-7/+2
* Handle 1750 front buttonMatthias P. Braendli2019-05-032-3/+7
* Add a bit of delay on the 1750 detectorMatthias P. Braendli2019-04-222-4/+11
* Fix FAX detection and outputMatthias P. Braendli2019-04-195-9/+10
* Disable Tones debuggingMatthias P. Braendli2019-04-191-0/+2
* Fix simulator compilationMatthias P. Braendli2019-04-197-73/+56
* Upgrade FreeRTOS to 10.2.0Matthias P. Braendli2019-04-1932-4599/+9547
* Fix tone detectionMatthias P. Braendli2019-04-195-205/+65
* tone: do Q1 and Q2 calculation inside IRQMatthias P. Braendli2019-04-194-19/+99
* Switch to 16kHz audioMatthias P. Braendli2019-04-143-4/+4
* Properly use queues from ISRMatthias P. Braendli2019-04-144-7/+12
* Add task cpu usage printout code, disabled by defaultMatthias P. Braendli2019-04-142-2/+69
* Enable FAX mode when DTMF sequence detectedMatthias P. Braendli2019-04-135-13/+71
* Implement DTMF sequence decoding and FSM activation of tone detector (untested)Matthias P. Braendli2019-04-129-38/+190
* Reorder audio output NVIC settingsMatthias P. Braendli2019-04-111-1/+1
* Rework tone detectorMatthias P. Braendli2019-04-118-90/+232
* Switch debug UART to 115200Matthias P. Braendli2019-04-111-1/+1
* Document openocd + gdbMatthias P. Braendli2019-04-111-0/+11
* Add some 1750 detection code to glutt-o-logicMatthias P. Braendli2019-04-1118-96/+315
* Make 1750 detector work in simulator FSMMatthias P. Braendli2019-03-024-27/+9
* Default simulator voltage to 14V to stay in QROMatthias P. Braendli2019-03-021-1/+1
* Merge branch '1750_soft'Matthias P. Braendli2019-03-0217-8/+596
|\
| * Fix tone test generationMatthias P. Braendli2018-06-191-5/+5
| * Widen frequency range of tone testMatthias P. Braendli2018-06-193-7/+30
| * Fix simulator compilationMatthias P. Braendli2018-06-173-10/+9
| * Add tone-test-simMatthias P. Braendli2018-06-178-59/+298
| * Base with a working implementation on the simulator for software 1750 detectionMaximilien Cuony2018-05-1011-8/+335
* | rename fsm input variablesMatthias P. Braendli2019-03-023-12/+11
* | Allocate SQ2, DET 1750 and NF, partly adapt code, schematics and layoutMatthias P. Braendli2019-03-023-94/+149
|/
* Add BUG_1750_BROKEN workaroundMatthias P. Braendli2018-05-091-1/+19
* Fix analog_supply_too_low() commentMatthias P. Braendli2018-05-091-1/+1
* Stop SSTV Autoopen with QRPMaximilien Cuony2017-09-261-1/+3
* Allow to open the relay with SQ using fax modeMaximilien Cuony2017-04-303-3/+55
* Increate delay after locatorMaximilien Cuony2017-04-301-3/+3
* Compile simulator in 64 bitsMatthias P. Braendli2016-12-201-1/+0
* Avoid letter delay if QSO duration was between 3 and 5 secMatthias P. Braendli2016-12-201-1/+1
* Initialise struct tm in gps_monit_taskMatthias P. Braendli2016-12-171-1/+1
* Add vc.cMatthias P. Braendli2016-12-161-0/+30
* Reduce delay after end of baliseMatthias P. Braendli2016-12-101-1/+1
* Do not send text at QSO end if balise is pendingMatthias P. Braendli2016-10-201-20/+29
* Restart QSO duration counter once end text sentMatthias P. Braendli2016-10-201-19/+22
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 06:27:28 +0000