Bye bye old script, welcome supervisor

1 files changed, 0 insertions, 354 deletions

diff --git a/encode-jack-dls-jamin.sh b/encode-jack-dls-jamin.sh
deleted file mode 100644
index 32d4557..0000000
--- a/encode-jack-dls-jamin.sh
+++ /dev/null
@@ -1,354 +0,0 @@
-#!/bin/bash
-#
-# Encode programme using mplayer, connect through JACK
-# to jamin, which connects to dabplus-enc or toolame
-#
-# Read webstream from URL using mplayer
-# Launch dabplus-enc or toolame encoder
-# Launch jamin
-# connect all through JACK
-# monitor processes, and restart if necessary
-# Optionally send an email when restart happens
-#
-# Extract ICY Text from stream and use it for DLS
-
-printerr() {
-    echo -e "\033[01;31m$1\033[0m"
-    logger -p local0.error -t "$ID" "$1"
-}
-
-printmsg() {
-    echo -e "\033[01;32m$1\033[0m"
-    logger -p local0.notice -t "$ID" "$1"
-}
-
-set -u
-
-# check number of arguments
-if [[ "$#" -lt 3 ]] ; then
-    echo "Usage $0 url jack-id destination [volume] [encoder]"
-    echo "The volume setting is optional"
-    exit 1
-fi
-
-if [[ "$#" -gt 2 ]] ; then
-    URL=$1
-    ID=$2
-    DST=$3
-fi
-
-if [[ "$#" == 4 ]] ; then
-    VOL=$4
-    ENC="dabplus-enc"
-elif [[ "$#" == 5 ]] ; then
-    VOL=$4
-    ENC=$5
-else
-    VOL="0"
-    ENC="dabplus-enc"
-fi
-
-
-BITRATE=96
-RATE=48
-
-if [[ "$ENC" == "toolame" && "$RATE" == "32" ]] ; then
-    echo "32kHz not supported for toolame"
-    exit 1
-fi
-
-DLSDIR=site/dls
-SLIDEDIR=site/slide
-JAMIN=site/jamin
-
-
-mplayerpid=0
-encoderpid=0
-motencoderpid=0
-jaminpid=0
-running=1
-
-mplayer_ok=0
-encoder_ok=0
-jamin_ok=0
-
-# The trap for Ctrl-C
-sigint_trap() {
-    printerr "Got Ctrl-C, killing mplayer and encoder"
-    running=0
-
-    if [[ "$mplayerpid" != "0" ]] ; then
-        kill -TERM $mplayerpid
-        sleep 2
-        kill -KILL $mplayerpid
-    fi
-
-    if [[ "$encoderpid" != "0" ]] ; then
-        kill -TERM $encoderpid
-        sleep 2
-        kill -KILL $encoderpid
-    fi
-
-    if [[ "$motencoderpid" != "0" ]] ; then
-        kill -TERM $motencoderpid
-        sleep 2
-        kill -KILL $motencoderpid
-    fi
-    if [[ "$jaminpid" != "0" ]] ; then
-        kill -TERM $jaminpid
-        sleep 2
-        kill -KILL $jaminpid
-    fi
-
-    printmsg "Goodbye"
-    exit
-}
-
-trap sigint_trap SIGTERM
-trap sigint_trap SIGINT
-
-while [[ "$running" == "1" ]]
-do
-    if [[ "$mplayerpid" == "0" ]] ; then
-        if [[ "$VOL" == "0" ]] ; then
-            mplayer -quiet -af resample=${RATE}000:0:2 -ao jack:name=$ID "$URL" | \
-                ./icy-info.py $DLSDIR/${ID}.dls $DLSDIR/${ID}-default.dls &
-            mplayerpid=$!
-        else
-            mplayer -quiet -af resample=${RATE}000:0:2 -af volume=$VOL -ao jack:name=$ID "$URL" | \
-                ./icy-info.py $DLSDIR/${ID}.dls $DLSDIR/${ID}-default.dls &
-            mplayerpid=$!
-        fi
-
-        printmsg "Started mplayer with pid $mplayerpid"
-
-        # give some time to mplayer to set up and
-        # wait until port becomes visible
-        timeout=10
-
-        while [[ "$mplayer_ok" == "0" ]]
-        do
-            printmsg "Waiting for mplayer to connect to jack ($timeout)"
-            sleep 1
-            mplayer_ok=$(jack_lsp $ID:out_0 | wc -l)
-
-            timeout=$(( $timeout - 1 ))
-
-            if [[ "$timeout" == "0" ]] ; then
-                printerr "mplayer doesn't connect to jack !"
-                kill $mplayerpid
-                break
-            fi
-        done
-    else
-        printmsg "No need to start mplayer: $mplayerpid"
-    fi
-
-    if [[ "$mplayer_ok" == "1" && "$encoder_ok" == "0" ]] ; then
-        if [[ "$ENC" == "dabplus-enc" ]] ; then
-            dabplus-enc -j ${ID}enc -l \
-                -p 34 -P $DLSDIR/${ID}.pad \
-                -b $BITRATE -r ${RATE}000 -f raw -o $DST &
-            encoderpid=$!
-        elif [[ "$ENC" == "toolame" ]] ; then
-            toolame -b $BITRATE -s $RATE \
-                -p 34 -P $DLSDIR/${ID}.pad \
-                -j ${ID}enc $DST &
-            encoderpid=$!
-        fi
-
-        #jasmin
-
-        if [[ "$jaminpid" == "0" ]] ; then
-            jamin -g -f $JAMIN/$ID.jam $ID:out_0 $ID:out_1 ${ID}enc:input0 ${ID}enc:input1 &
-            jaminpid=$!
-        fi
-
-        printmsg "Started jamin with pid $jaminpid"
-
-        # give some time to the encoder to set up and
-        # wait until port becomes visible
-        timeout=10
-
-        encoder_connected=0
-
-        while [[ "$encoder_connected" == "0" ]]
-        do
-            printmsg "Waiting for encoder to connect to jack ($timeout)"
-            sleep 1
-            encoder_connected=$(jack_lsp ${ID}enc:input0 | wc -l)
-
-            timeout=$(( $timeout - 1))
-
-            if [[ "$timeout" == "0" ]] ; then
-                printerr "encoder doesn't connect to jack !"
-                kill $encoderpid
-                break
-            fi
-        done
-
-#        if [[ "$encoder_connected" == "1" ]] ; then
-#            jack_connect ${ID}:out_0 ${ID}enc:input0 && \
-#            jack_connect ${ID}:out_1 ${ID}enc:input1 #&& \
-#            jack_connect ${ID}:out_0 ${ID}enc:input0 && \
-#           jack_connect ${ID}:out_0 ${ID}enc:input1
-#           connect_ret=$?
-#
-#            if [[ "$connect_ret" == "0" ]] ; then
-#                encoder_ok=1
-#            else
-#                encoder_ok=0
-#            fi
-
-encoder_ok=1
-#
-#            if [[ "$encoder_ok" == "1" ]] ; then
-#                printmsg "Started encoder with pid $encoderpid"
-#            else
-#                if [[ "$encoderpid" != "0" ]] ; then
-#                    kill -TERM $encoderpid
-#                fi
-#            fi
-#        fi
-    fi
-
-    if [[ "$encoder_ok" == "1" && "$motencoderpid" == "0" ]] ; then
-        # Check if the slides folder exists, and start mot-encoder accordingly
-        if [[ -d "$SLIDEDIR/$ID" ]] ; then
-            mot-encoder -o $DLSDIR/${ID}.pad -t $DLSDIR/${ID}.dls -p 34 -v \
-                -e -d $SLIDEDIR/${ID} &
-            motencoderpid=$!
-        else
-            mot-encoder -o $DLSDIR/${ID}.pad -t $DLSDIR/${ID}.dls -p 34 -v &
-            motencoderpid=$!
-        fi
-
-        printmsg "Started mot-encoder with pid $encoderpid"
-    fi
-
-
-    sleep 8
-
-    checkloop=1
-    while [[ "$checkloop" == "1" ]]
-    do
-        sleep 2
-
-        kill -s 0 $mplayerpid
-        if [[ "$?" != "0" ]] ; then
-            # mplayer died
-            # we must kill jack-stdout, because we cannot reconnect it
-            # to a new mplayer, since we do not know the jack-stdout name.
-            # And it has no cmdline option to set one, Rrrrongntudtjuuu!
-
-            if [[ "$encoderpid" != "0" ]] ; then
-                kill -TERM $encoderpid
-            fi
-
-            if [[ "$motencoderpid" != "0" ]] ; then
-                kill -TERM $motencoderpid
-            fi
-
-            if [[ "$jaminpid" != "0" ]] ; then
-                kill -TERM $jaminpid
-            fi
-
-            # mark as dead
-            mplayerpid=0
-            mplayer_ok=0
-            encoderpid=0
-            encoder_ok=0
-            jaminpid=0
-            jamin_ok=0
-            motencoderpid=0
-
-            checkloop=0
-
-            printerr "Mplayer died"
-        fi
-
-        if [[ "$encoderpid" != "0" ]] ; then
-            kill -s 0 $encoderpid
-            if [[ "$?" != "0" ]] ; then
-                # the encoder died,
-                # no need to kill the mplayer, we can reconnect to it
-
-                if [[ "$motencoderpid" != "0" ]] ; then
-                    kill -TERM $motencoderpid
-                fi
-
-                if [[ "$jaminpid" != "0" ]] ; then
-                    kill -TERM $jaminpid
-                fi
-
-                encoderpid=0
-                encoder_ok=0
-                jaminpid=0
-                jamin_ok=0
-                motencoderpid=0
-
-                checkloop=0
-
-                printerr "Encoder died"
-            fi
-        fi
-
-        if [[ "$jaminpid" != "0" ]] ; then
-            kill -s 0 $jaminpid
-            if [[ "$?" != "0" ]] ; then
-                # the jamin died,
-
-                if [[ "$motencoderpid" != "0" ]] ; then
-                    kill -TERM $motencoderpid
-                fi
-
-                if [[ "$encoderpid" != "0" ]] ; then
-                    kill -TERM $encoderpid
-                fi
-
-                encoderpid=0
-                encoder_ok=0
-                jaminpid=0
-                motencoderpid=0
-
-                checkloop=0
-
-                printerr "Jamin died"
-            fi
-
-        fi
-
-        if [[ "$motencoderpid" != "0" ]] ; then
-            kill -s 0 $motencoderpid
-            if [[ "$?" != "0" ]] ; then
-                # mot-encoder died
-                # let's try restarting it
-
-                motencoderpid=0
-
-                checkloop=0
-
-                printerr "mot-encoder died"
-            fi
-        fi
-    done
-
-    MAILTO=$(cat site/mail-warning.txt)
-
-    if [[ "$MAILTO" != "" ]] ; then
-        NOW=$(date)
-
-        mail -s "Encoder $ID restart $URL" "$MAILTO" << EOF
-The encoder id:$ID
-encoding $URL -> $DST using encode-jack-dls-jamin was restarted at
-$NOW
-
-mplayer ok? $mplayer_ok
-
-EOF
-
-    fi
-    sleep 5
-
-done
-