aboutsummaryrefslogtreecommitdiffstats
path: root/usrp2/vrt/vita_rx_tb.v
blob: b4fda96226b4a063e6d9043cb0bf49841b5efefc (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
module vita_rx_tb;

   localparam DECIM  = 8'd4;
   localparam MAXCHAN=4;
   localparam NUMCHAN=4;
   
   reg clk 	     = 0;
   reg reset 	     = 1;

   initial #1000 reset = 0;
   always #50 clk = ~clk;

   initial $dumpfile("vita_rx_tb.vcd");
   initial $dumpvars(0,vita_rx_tb);

   wire [(MAXCHAN*32)-1:0] sample;
   wire        strobe, run;
   wire [35:0] data_o;
   wire        src_rdy;
   reg 	       dst_rdy = 1;
   wire [63:0] vita_time;

   reg 	       set_stb = 0;
   reg [7:0]   set_addr;
   reg [31:0]  set_data;
   wire        set_stb_dsp;
   wire [7:0]  set_addr_dsp;
   wire [31:0] set_data_dsp;

   /*
   settings_bus_crossclock settings_bus_xclk_dsp
     (.clk_i(clk), .rst_i(reset), .set_stb_i(set_stb), .set_addr_i(set_addr), .set_data_i(set_data),
      .clk_o(clk), .rst_o(reset), .set_stb_o(set_stb_dsp), .set_addr_o(set_addr_dsp), .set_data_o(set_data_dsp));
    */
   
   wire        sample_dst_rdy, sample_src_rdy;
   //wire [99:0] sample_data_o;
   wire [64+4+(MAXCHAN*32)-1:0] sample_data_o;

   vita_rx_control #(.BASE(0), .WIDTH(32*MAXCHAN)) vita_rx_control
     (.clk(clk), .reset(reset), .clear(0),
      .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
      .vita_time(vita_time), .overrun(overrun),
      .sample_fifo_o(sample_data_o), .sample_fifo_dst_rdy_i(sample_dst_rdy), .sample_fifo_src_rdy_o(sample_src_rdy),
      .sample(sample), .run(run), .strobe(strobe));

   vita_rx_framer #(.BASE(0), .MAXCHAN(MAXCHAN)) vita_rx_framer
     (.clk(clk), .reset(reset), .clear(0),
      .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
      .data_o(data_o), .dst_rdy_i(dst_rdy), .src_rdy_o(src_rdy),
      .sample_fifo_i(sample_data_o), .sample_fifo_dst_rdy_o(sample_dst_rdy), .sample_fifo_src_rdy_i(sample_src_rdy),
      .fifo_occupied(), .fifo_full(), .fifo_empty() );
   
   rx_dsp_model rx_dsp_model
     (.clk(clk), .reset(reset), .run(run), .decim(DECIM), .strobe(strobe), .sample(sample[31:0]));

   generate
      if(MAXCHAN>1)
	assign sample[(MAXCHAN*32)-1:32] = 0;
   endgenerate
   
   time_64bit #(.TICKS_PER_SEC(120000000), .BASE(0)) time_64bit
     (.clk(clk), .rst(reset),
      .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
      .pps(0), .vita_time(vita_time));
   
   always @(posedge clk)
     if(src_rdy & dst_rdy)
       begin
	  if(data_o[32] & ~data_o[33])
	    begin
	       $display("RX-PKT-START %d",$time);
	       $display("       RX-PKT-DAT %x",data_o[31:0]);
	    end
	  else if(data_o[32] & data_o[33])
	    begin
	       $display("       RX-PKT-DAT %x -- With ERR",data_o[31:0]);
	       $display("RX-PKT-ERR %d",$time);
	    end
	  else if(~data_o[32] & data_o[33])
	    begin
	       $display("       RX-PKT-DAT %x",data_o[31:0]);
	       $display("RX-PKT-END %d",$time);
	    end
	  else
	    $display("       RX-PKT DAT %x",data_o[31:0]);
       end

   initial 
     begin
	@(negedge reset);
	@(posedge clk);
	write_setting(4,32'hDEADBEEF);  // VITA header
	write_setting(5,32'hF00D1234);  // VITA streamid
	write_setting(6,32'h98765432);  // VITA trailer
	write_setting(7,8);  // Samples per VITA packet
	write_setting(8,NUMCHAN);  // Samples per VITA packet
	queue_rx_cmd(1,0,8,32'h0,32'h0);  // send imm, single packet
	queue_rx_cmd(1,0,16,32'h0,32'h0);  // send imm, 2 packets worth
	queue_rx_cmd(1,0,7,32'h0,32'h0);  // send imm, 1 short packet worth
	queue_rx_cmd(1,0,9,32'h0,32'h0);  // send imm, just longer than 1 packet
	
	queue_rx_cmd(1,1,16,32'h0,32'h0);  // chained
	queue_rx_cmd(0,0,8,32'h0,32'h0);  // 2nd in chain
	
	queue_rx_cmd(1,1,17,32'h0,32'h0);  // chained, odd length
	queue_rx_cmd(0,0,9,32'h0,32'h0);  // 2nd in chain, also odd length
	
	queue_rx_cmd(0,0,8,32'h0,32'h340);  // send at, on time
	queue_rx_cmd(0,0,8,32'h0,32'h100);  // send at, but late

	queue_rx_cmd(1,1,8,32'h0,32'h0);  // chained, but break chain
	#100000;
	$display("\nEnd chain with zero samples, shouldn't error\n");
	queue_rx_cmd(1,1,8,32'h0,32'h0);  // chained
	queue_rx_cmd(0,0,0,32'h0,32'h0);  // end chain with zero samples, should keep us out of error
	#100000;

	$display("\nEnd chain with zero samples on odd-length, shouldn't error\n");
	queue_rx_cmd(1,1,14,32'h0,32'h0);  // chained
	queue_rx_cmd(0,0,0,32'h0,32'h0);  // end chain with zero samples, should keep us out of error
	#100000;
	$display("Should have gotten 14 samples and EOF by now\n");
	
	queue_rx_cmd(1,1,9,32'h0,32'h0);  // chained, but break chain, odd length
	#100000;
	dst_rdy <= 0;  // stop pulling out of fifo so we can get an overrun
	queue_rx_cmd(1,0,100,32'h0,32'h0);  // long enough to fill the fifos
	queue_rx_cmd(1,0,5,32'h0,32'h0);  // this command waits until the previous error packet is sent
	#100000;
	dst_rdy <= 1;  // restart the reads so we can see what we got
	#100000;
	dst_rdy <= 0;  // stop pulling out of fifo so we can get an overrun
	queue_rx_cmd(1,1,100,32'h0,32'h0);  // long enough to fill the fifos
	//queue_rx_cmd(1,0,5,32'h0,32'h0);  // this command waits until the previous error packet is sent
	#100000;
	@(posedge clk);
	dst_rdy <= 1;
	  
	#100000 $finish;
     end

   task write_setting;
      input [7:0] addr;
      input [31:0] data;
      begin
	 set_stb <= 0;
	 @(posedge clk);
	 set_addr <= addr;
	 set_data <= data;
	 set_stb  <= 1;
	 @(posedge clk);
	 set_stb <= 0;
      end
   endtask // write_setting
   
   task queue_rx_cmd;
      input send_imm;
      input chain;
      input [29:0] lines;
      input [31:0] secs;
      input [31:0] tics;
      begin
	 write_setting(0,{send_imm,chain,lines});
	 write_setting(1,secs);
	 write_setting(2,tics);
      end
   endtask // queue_rx_cmd
   
endmodule // rx_control_tb

module rx_dsp_model
  (input clk, input reset,
   input run,
   input [7:0] decim,
   output strobe,
   output [31:0] sample);
   
   reg [15:0] 	  pktnum = 0;
   reg [15:0] 	 counter = 0;

   reg 		 run_d1;
   always @(posedge clk) run_d1 <= run;
   
   always @(posedge clk)
     if(run & ~run_d1)
       begin
	  counter 		<= 0;
	  pktnum 		<= pktnum + 1;
       end
     else if(run & strobe)
       counter 			<= counter + 1;
       
   assign sample 		 = {pktnum,counter};

   reg [7:0] stb_ctr = 0;
   
   always @(posedge clk)
     if(reset)
       stb_ctr 	 <= 0;
     else if(run & ~run_d1)
       stb_ctr 	 <= 1;
     else if(run)
       if(stb_ctr == decim-1)
	 stb_ctr <= 0;
       else
	 stb_ctr <= stb_ctr + 1;

   assign strobe  = stb_ctr == decim-1;
   
endmodule // rx_dsp_model