1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
|
//
// Copyright 2011 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
module rx_dcoffset
#(parameter WIDTH=16,
parameter ADDR=8'd0,
parameter alpha_shift=16)
(input clk, input rst,
input set_stb, input [7:0] set_addr, input [31:0] set_data,
input [WIDTH-1:0] in, output [WIDTH-1:0] out);
wire set_now = set_stb & (ADDR == set_addr);
reg fixed; // uses fixed offset
wire [WIDTH-1:0] fixed_dco;
localparam int_width = WIDTH + alpha_shift;
reg [int_width-1:0] integrator;
wire [WIDTH-1:0] quantized;
always @(posedge clk)
if(rst)
begin
fixed <= 0;
integrator <= {int_width{1'b0}};
end
else if(set_now)
begin
//integrator <= {set_data[30:0],{(31-int_width){1'b0}}};
fixed <= set_data[31];
end
else if(~fixed)
integrator <= integrator + {{(alpha_shift){out[WIDTH-1]}},out};
round_sd #(.WIDTH_IN(int_width),.WIDTH_OUT(WIDTH)) round_sd
(.clk(clk), .reset(rst), .in(integrator), .strobe_in(1'b1), .out(quantized), .strobe_out());
add2_and_clip_reg #(.WIDTH(WIDTH)) add2_and_clip_reg
(.clk(clk), .rst(rst), .in1(in), .in2(-quantized), .strobe_in(1'b1), .sum(out), .strobe_out());
endmodule // rx_dcoffset
|
