1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
|
//
// Copyright 2011 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
// FIFO intended to be interchangeable with shortfifo, but
// based on block ram instead of SRL16's
// only one clock domain
// Port A is write port, Port B is read port
module fifo_long
#(parameter WIDTH=32, SIZE=9)
(input clk, input reset, input clear,
input [WIDTH-1:0] datain,
input src_rdy_i,
output dst_rdy_o,
output [WIDTH-1:0] dataout,
output src_rdy_o,
input dst_rdy_i,
output reg [15:0] space,
output reg [15:0] occupied);
wire write = src_rdy_i & dst_rdy_o;
wire read = dst_rdy_i & src_rdy_o;
wire full, empty;
assign dst_rdy_o = ~full;
assign src_rdy_o = ~empty;
// Read side states
localparam EMPTY = 0;
localparam PRE_READ = 1;
localparam READING = 2;
reg [SIZE-1:0] wr_addr, rd_addr;
reg [1:0] read_state;
reg empty_reg, full_reg;
always @(posedge clk)
if(reset)
wr_addr <= 0;
else if(clear)
wr_addr <= 0;
else if(write)
wr_addr <= wr_addr + 1;
ram_2port #(.DWIDTH(WIDTH),.AWIDTH(SIZE))
ram (.clka(clk),
.ena(1'b1),
.wea(write),
.addra(wr_addr),
.dia(datain),
.doa(),
.clkb(clk),
.enb((read_state==PRE_READ)|read),
.web(0),
.addrb(rd_addr),
.dib({WIDTH{1'b1}}),
.dob(dataout));
always @(posedge clk)
if(reset)
begin
read_state <= EMPTY;
rd_addr <= 0;
empty_reg <= 1;
end
else
if(clear)
begin
read_state <= EMPTY;
rd_addr <= 0;
empty_reg <= 1;
end
else
case(read_state)
EMPTY :
if(write)
begin
//rd_addr <= wr_addr;
read_state <= PRE_READ;
end
PRE_READ :
begin
read_state <= READING;
empty_reg <= 0;
rd_addr <= rd_addr + 1;
end
READING :
if(read)
if(rd_addr == wr_addr)
begin
empty_reg <= 1;
if(write)
read_state <= PRE_READ;
else
read_state <= EMPTY;
end
else
rd_addr <= rd_addr + 1;
endcase // case(read_state)
wire [SIZE-1:0] dont_write_past_me = rd_addr - 3;
wire becoming_full = wr_addr == dont_write_past_me;
always @(posedge clk)
if(reset)
full_reg <= 0;
else if(clear)
full_reg <= 0;
else if(read & ~write)
full_reg <= 0;
//else if(write & ~read & (wr_addr == (rd_addr-3)))
else if(write & ~read & becoming_full)
full_reg <= 1;
//assign empty = (read_state != READING);
assign empty = empty_reg;
// assign full = ((rd_addr - 1) == wr_addr);
assign full = full_reg;
//////////////////////////////////////////////
// space and occupied are for diagnostics only
// not guaranteed exact
localparam NUMLINES = (1<<SIZE)-2;
always @(posedge clk)
if(reset)
space <= NUMLINES;
else if(clear)
space <= NUMLINES;
else if(read & ~write)
space <= space + 1;
else if(write & ~read)
space <= space - 1;
always @(posedge clk)
if(reset)
occupied <= 0;
else if(clear)
occupied <= 0;
else if(read & ~write)
occupied <= occupied - 1;
else if(write & ~read)
occupied <= occupied + 1;
endmodule // fifo_long
|
