1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
|
// -*- verilog -*-
//
// USRP - Universal Software Radio Peripheral
//
// Copyright (C) 2005,2006 Matt Ettus
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
//
`include "../common/fpga_regs_common.v"
`include "../common/fpga_regs_standard.v"
module io_pins
( inout wire [15:0] io_0, inout wire [15:0] io_1, inout wire [15:0] io_2, inout wire [15:0] io_3,
input wire [15:0] reg_0, input wire [15:0] reg_1, input wire [15:0] reg_2, input wire [15:0] reg_3,
input clock, input rx_reset, input tx_reset,
input [6:0] serial_addr, input [31:0] serial_data, input serial_strobe);
reg [15:0] io_0_oe,io_1_oe,io_2_oe,io_3_oe;
bidir_reg bidir_reg_0 (.tristate(io_0),.oe(io_0_oe),.reg_val(reg_0));
bidir_reg bidir_reg_1 (.tristate(io_1),.oe(io_1_oe),.reg_val(reg_1));
bidir_reg bidir_reg_2 (.tristate(io_2),.oe(io_2_oe),.reg_val(reg_2));
bidir_reg bidir_reg_3 (.tristate(io_3),.oe(io_3_oe),.reg_val(reg_3));
// Upper 16 bits are mask for lower 16
always @(posedge clock)
if(serial_strobe)
case(serial_addr)
`FR_OE_0 : io_0_oe
<= #1 (io_0_oe & ~serial_data[31:16]) | (serial_data[15:0] & serial_data[31:16] );
`FR_OE_1 : io_1_oe
<= #1 (io_1_oe & ~serial_data[31:16]) | (serial_data[15:0] & serial_data[31:16] );
`FR_OE_2 : io_2_oe
<= #1 (io_2_oe & ~serial_data[31:16]) | (serial_data[15:0] & serial_data[31:16] );
`FR_OE_3 : io_3_oe
<= #1 (io_3_oe & ~serial_data[31:16]) | (serial_data[15:0] & serial_data[31:16] );
endcase // case(serial_addr)
endmodule // io_pins
|
