1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
|
//
// Copyright 2010-2011 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
#ifndef INCLUDED_USRP2_REGS_HPP
#define INCLUDED_USRP2_REGS_HPP
////////////////////////////////////////////////////////////////////////
// Define slave bases
////////////////////////////////////////////////////////////////////////
#define ROUTER_RAM_BASE 0x4000
#define SPI_BASE 0x5000
#define I2C_BASE 0x5400
#define GPIO_BASE 0x5800
#define READBACK_BASE 0x5C00
#define ETH_BASE 0x6000
#define SETTING_REGS_BASE 0x7000
#define PIC_BASE 0x8000
#define UART_BASE 0x8800
#define ATR_BASE 0x8C00
////////////////////////////////////////////////////////////////////////
// Setting register offsets
////////////////////////////////////////////////////////////////////////
#define SR_MISC 0 // 7 regs
#define SR_SIMTIMER 8 // 2
#define SR_TIME64 10 // 6
#define SR_BUF_POOL 16 // 4
#define SR_RX_FRONT 24 // 5
#define SR_RX_CTRL0 32 // 9
#define SR_RX_DSP0 48 // 7
#define SR_RX_CTRL1 80 // 9
#define SR_RX_DSP1 96 // 7
#define SR_TX_FRONT 128 // ?
#define SR_TX_CTRL 144 // 6
#define SR_TX_DSP 160 // 5
#define SR_UDP_SM 192 // 64
#define U2_REG_SR_ADDR(sr) (SETTING_REGS_BASE + (4 * (sr)))
/////////////////////////////////////////////////
// SPI Slave Constants
////////////////////////////////////////////////
// Masks for controlling different peripherals
#define SPI_SS_AD9510 1
#define SPI_SS_AD9777 2
#define SPI_SS_RX_DAC 4
#define SPI_SS_RX_ADC 8
#define SPI_SS_RX_DB 16
#define SPI_SS_TX_DAC 32
#define SPI_SS_TX_ADC 64
#define SPI_SS_TX_DB 128
#define SPI_SS_ADS62P44 256 //for usrp2p
/////////////////////////////////////////////////
// Misc Control
////////////////////////////////////////////////
#define U2_REG_MISC_CTRL_CLOCK U2_REG_SR_ADDR(0)
#define U2_REG_MISC_CTRL_SERDES U2_REG_SR_ADDR(1)
#define U2_REG_MISC_CTRL_ADC U2_REG_SR_ADDR(2)
#define U2_REG_MISC_CTRL_LEDS U2_REG_SR_ADDR(3)
#define U2_REG_MISC_CTRL_PHY U2_REG_SR_ADDR(4)
#define U2_REG_MISC_CTRL_DBG_MUX U2_REG_SR_ADDR(5)
#define U2_REG_MISC_CTRL_RAM_PAGE U2_REG_SR_ADDR(6)
#define U2_REG_MISC_CTRL_FLUSH_ICACHE U2_REG_SR_ADDR(7)
#define U2_REG_MISC_CTRL_LED_SRC U2_REG_SR_ADDR(8)
#define U2_FLAG_MISC_CTRL_SERDES_ENABLE 8
#define U2_FLAG_MISC_CTRL_SERDES_PRBSEN 4
#define U2_FLAG_MISC_CTRL_SERDES_LOOPEN 2
#define U2_FLAG_MISC_CTRL_SERDES_RXEN 1
#define U2_FLAG_MISC_CTRL_ADC_ON 0x0F
#define U2_FLAG_MISC_CTRL_ADC_OFF 0x00
/////////////////////////////////////////////////
// VITA49 64 bit time (write only)
////////////////////////////////////////////////
#define U2_REG_TIME64_SECS U2_REG_SR_ADDR(SR_TIME64 + 0)
#define U2_REG_TIME64_TICKS U2_REG_SR_ADDR(SR_TIME64 + 1)
#define U2_REG_TIME64_FLAGS U2_REG_SR_ADDR(SR_TIME64 + 2)
#define U2_REG_TIME64_IMM U2_REG_SR_ADDR(SR_TIME64 + 3)
#define U2_REG_TIME64_TPS U2_REG_SR_ADDR(SR_TIME64 + 4)
#define U2_REG_TIME64_MIMO_SYNC U2_REG_SR_ADDR(SR_TIME64 + 5)
//pps flags (see above)
#define U2_FLAG_TIME64_PPS_NEGEDGE (0 << 0)
#define U2_FLAG_TIME64_PPS_POSEDGE (1 << 0)
#define U2_FLAG_TIME64_PPS_SMA (0 << 1)
#define U2_FLAG_TIME64_PPS_MIMO (1 << 1)
#define U2_FLAG_TIME64_LATCH_NOW 1
#define U2_FLAG_TIME64_LATCH_NEXT_PPS 0
/////////////////////////////////////////////////
// Readback regs
////////////////////////////////////////////////
#define U2_REG_STATUS READBACK_BASE + 4*8
#define U2_REG_TIME64_SECS_RB_IMM READBACK_BASE + 4*10
#define U2_REG_TIME64_TICKS_RB_IMM READBACK_BASE + 4*11
#define U2_REG_COMPAT_NUM_RB READBACK_BASE + 4*12
#define U2_REG_IRQ_RB READBACK_BASE + 4*13
#define U2_REG_TIME64_SECS_RB_PPS READBACK_BASE + 4*14
#define U2_REG_TIME64_TICKS_RB_PPS READBACK_BASE + 4*15
/////////////////////////////////////////////////
// RX FE
////////////////////////////////////////////////
#define U2_REG_RX_FE_SWAP_IQ U2_REG_SR_ADDR(SR_RX_FRONT + 0) //lower bit
#define U2_REG_RX_FE_MAG_CORRECTION U2_REG_SR_ADDR(SR_RX_FRONT + 1) //18 bits
#define U2_REG_RX_FE_PHASE_CORRECTION U2_REG_SR_ADDR(SR_RX_FRONT + 2) //18 bits
#define U2_REG_RX_FE_OFFSET_I U2_REG_SR_ADDR(SR_RX_FRONT + 3) //18 bits
#define U2_REG_RX_FE_OFFSET_Q U2_REG_SR_ADDR(SR_RX_FRONT + 4) //18 bits
/////////////////////////////////////////////////
// TX FE
////////////////////////////////////////////////
#define U2_REG_TX_FE_DC_OFFSET_I U2_REG_SR_ADDR(SR_TX_FRONT + 0) //24 bits
#define U2_REG_TX_FE_DC_OFFSET_Q U2_REG_SR_ADDR(SR_TX_FRONT + 1) //24 bits
#define U2_REG_TX_FE_MAC_CORRECTION U2_REG_SR_ADDR(SR_TX_FRONT + 2) //18 bits
#define U2_REG_TX_FE_PHASE_CORRECTION U2_REG_SR_ADDR(SR_TX_FRONT + 3) //18 bits
#define U2_REG_TX_FE_MUX U2_REG_SR_ADDR(SR_TX_FRONT + 4) //8 bits (std output = 0x10, reversed = 0x01)
/////////////////////////////////////////////////
// DSP TX Regs
////////////////////////////////////////////////
#define U2_REG_DSP_TX_FREQ U2_REG_SR_ADDR(SR_TX_DSP + 0)
#define U2_REG_DSP_TX_SCALE_IQ U2_REG_SR_ADDR(SR_TX_DSP + 1)
#define U2_REG_DSP_TX_INTERP_RATE U2_REG_SR_ADDR(SR_TX_DSP + 2)
/////////////////////////////////////////////////
// DSP RX Regs
////////////////////////////////////////////////
#define U2_REG_DSP_RX_HELPER(which, offset) ((which == 0)? \
(U2_REG_SR_ADDR(SR_RX_DSP0 + offset)) : \
(U2_REG_SR_ADDR(SR_RX_DSP1 + offset)))
#define U2_REG_DSP_RX_FREQ(which) U2_REG_DSP_RX_HELPER(which, 0)
#define U2_REG_DSP_RX_DECIM(which) U2_REG_DSP_RX_HELPER(which, 2)
#define U2_REG_DSP_RX_MUX(which) U2_REG_DSP_RX_HELPER(which, 3)
#define U2_FLAG_DSP_RX_MUX_SWAP_IQ (1 << 0)
#define U2_FLAG_DSP_RX_MUX_REAL_MODE (1 << 1)
////////////////////////////////////////////////
// GPIO
////////////////////////////////////////////////
#define U2_REG_GPIO_IO GPIO_BASE + 0
#define U2_REG_GPIO_DDR GPIO_BASE + 4
#define U2_REG_GPIO_TX_SEL GPIO_BASE + 8
#define U2_REG_GPIO_RX_SEL GPIO_BASE + 12
// each 2-bit sel field is layed out this way
#define U2_FLAG_GPIO_SEL_GPIO 0 // if pin is an output, set by GPIO register
#define U2_FLAG_GPIO_SEL_ATR 1 // if pin is an output, set by ATR logic
#define U2_FLAG_GPIO_SEL_DEBUG_0 2 // if pin is an output, debug lines from FPGA fabric
#define U2_FLAG_GPIO_SEL_DEBUG_1 3 // if pin is an output, debug lines from FPGA fabric
///////////////////////////////////////////////////
// ATR Controller
////////////////////////////////////////////////
#define U2_REG_ATR_IDLE_TXSIDE ATR_BASE + 0
#define U2_REG_ATR_IDLE_RXSIDE ATR_BASE + 2
#define U2_REG_ATR_INTX_TXSIDE ATR_BASE + 4
#define U2_REG_ATR_INTX_RXSIDE ATR_BASE + 6
#define U2_REG_ATR_INRX_TXSIDE ATR_BASE + 8
#define U2_REG_ATR_INRX_RXSIDE ATR_BASE + 10
#define U2_REG_ATR_FULL_TXSIDE ATR_BASE + 12
#define U2_REG_ATR_FULL_RXSIDE ATR_BASE + 14
///////////////////////////////////////////////////
// RX CTRL regs
///////////////////////////////////////////////////
#define U2_REG_RX_CTRL_HELPER(which, offset) ((which == 0)? \
(U2_REG_SR_ADDR(SR_RX_CTRL0 + offset)) : \
(U2_REG_SR_ADDR(SR_RX_CTRL1 + offset)))
#define U2_REG_RX_CTRL_STREAM_CMD(which) U2_REG_RX_CTRL_HELPER(which, 0)
#define U2_REG_RX_CTRL_TIME_SECS(which) U2_REG_RX_CTRL_HELPER(which, 1)
#define U2_REG_RX_CTRL_TIME_TICKS(which) U2_REG_RX_CTRL_HELPER(which, 2)
#define U2_REG_RX_CTRL_CLEAR(which) U2_REG_RX_CTRL_HELPER(which, 3)
#define U2_REG_RX_CTRL_VRT_HDR(which) U2_REG_RX_CTRL_HELPER(which, 4)
#define U2_REG_RX_CTRL_VRT_SID(which) U2_REG_RX_CTRL_HELPER(which, 5)
#define U2_REG_RX_CTRL_VRT_TLR(which) U2_REG_RX_CTRL_HELPER(which, 6)
#define U2_REG_RX_CTRL_NSAMPS_PP(which) U2_REG_RX_CTRL_HELPER(which, 7)
#define U2_REG_RX_CTRL_NCHANNELS(which) U2_REG_RX_CTRL_HELPER(which, 8)
///////////////////////////////////////////////////
// TX CTRL regs
///////////////////////////////////////////////////
#define U2_REG_TX_CTRL_NUM_CHAN U2_REG_SR_ADDR(SR_TX_CTRL + 0)
#define U2_REG_TX_CTRL_CLEAR_STATE U2_REG_SR_ADDR(SR_TX_CTRL + 1)
#define U2_REG_TX_CTRL_REPORT_SID U2_REG_SR_ADDR(SR_TX_CTRL + 2)
#define U2_REG_TX_CTRL_POLICY U2_REG_SR_ADDR(SR_TX_CTRL + 3)
#define U2_REG_TX_CTRL_CYCLES_PER_UP U2_REG_SR_ADDR(SR_TX_CTRL + 4)
#define U2_REG_TX_CTRL_PACKETS_PER_UP U2_REG_SR_ADDR(SR_TX_CTRL + 5)
#define U2_FLAG_TX_CTRL_POLICY_WAIT (0x1 << 0)
#define U2_FLAG_TX_CTRL_POLICY_NEXT_PACKET (0x1 << 1)
#define U2_FLAG_TX_CTRL_POLICY_NEXT_BURST (0x1 << 2)
//enable flag for registers: cycles and packets per update packet
#define U2_FLAG_TX_CTRL_UP_ENB (1ul << 31)
#endif /* INCLUDED_USRP2_REGS_HPP */
|
