1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
|
//
// Copyright 2010-2011 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
#ifndef INCLUDED_USRP2_FW_COMMON_H
#define INCLUDED_USRP2_FW_COMMON_H
#include <stdint.h>
/*!
* Structs and constants for usrp2 communication.
* This header is shared by the firmware and host code.
* Therefore, this header may only contain valid C code.
*/
#ifdef __cplusplus
extern "C" {
#endif
//fpga and firmware compatibility numbers
#define USRP2_FPGA_COMPAT_NUM 7
#define USRP2_FW_COMPAT_NUM 10
//used to differentiate control packets over data port
#define USRP2_INVALID_VRT_HEADER 0
// udp ports for the usrp2 communication
// Dynamic and/or private ports: 49152-65535
#define USRP2_UDP_CTRL_PORT 49152
//#define USRP2_UDP_UPDATE_PORT 49154
#define USRP2_UDP_DSP0_PORT 49156
#define USRP2_UDP_ERR0_PORT 49157
#define USRP2_UDP_DSP1_PORT 49158
////////////////////////////////////////////////////////////////////////
// I2C addresses
////////////////////////////////////////////////////////////////////////
#define USRP2_I2C_DEV_EEPROM 0x50 // 24LC02[45]: 7-bits 1010xxx
#define USRP2_I2C_ADDR_MBOARD (USRP2_I2C_DEV_EEPROM | 0x0)
#define USRP2_I2C_ADDR_TX_DB (USRP2_I2C_DEV_EEPROM | 0x4)
#define USRP2_I2C_ADDR_RX_DB (USRP2_I2C_DEV_EEPROM | 0x5)
////////////////////////////////////////////////////////////////////////
// EEPROM Layout
////////////////////////////////////////////////////////////////////////
#define USRP2_EE_MBOARD_REV 0x00 //2 bytes, little-endian (historic, don't blame me)
#define USRP2_EE_MBOARD_MAC_ADDR 0x02 //6 bytes
#define USRP2_EE_MBOARD_IP_ADDR 0x0C //uint32, big-endian
#define USRP2_EE_MBOARD_BOOTLOADER_FLAGS 0xF7
typedef enum{
USRP2_CTRL_ID_HUH_WHAT = ' ',
//USRP2_CTRL_ID_FOR_SURE, //TODO error condition enums
//USRP2_CTRL_ID_SUX_MAN,
USRP2_CTRL_ID_WAZZUP_BRO = 'a',
USRP2_CTRL_ID_WAZZUP_DUDE = 'A',
USRP2_CTRL_ID_TRANSACT_ME_SOME_SPI_BRO = 's',
USRP2_CTRL_ID_OMG_TRANSACTED_SPI_DUDE = 'S',
USRP2_CTRL_ID_DO_AN_I2C_READ_FOR_ME_BRO = 'i',
USRP2_CTRL_ID_HERES_THE_I2C_DATA_DUDE = 'I',
USRP2_CTRL_ID_WRITE_THESE_I2C_VALUES_BRO = 'h',
USRP2_CTRL_ID_COOL_IM_DONE_I2C_WRITE_DUDE = 'H',
USRP2_CTRL_ID_GET_THIS_REGISTER_FOR_ME_BRO = 'r',
USRP2_CTRL_ID_OMG_GOT_REGISTER_SO_BAD_DUDE = 'R',
USRP2_CTRL_ID_HEY_WRITE_THIS_UART_FOR_ME_BRO = 'u',
USRP2_CTRL_ID_MAN_I_TOTALLY_WROTE_THAT_UART_DUDE = 'U',
USRP2_CTRL_ID_SO_LIKE_CAN_YOU_READ_THIS_UART_BRO = 'v',
USRP2_CTRL_ID_I_HELLA_READ_THAT_UART_DUDE = 'V',
USRP2_CTRL_ID_HOLLER_AT_ME_BRO = 'l',
USRP2_CTRL_ID_HOLLER_BACK_DUDE = 'L',
USRP2_CTRL_ID_PEACE_OUT = '~'
} usrp2_ctrl_id_t;
typedef enum{
USRP2_DIR_RX = 'r',
USRP2_DIR_TX = 't'
} usrp2_dir_which_t;
typedef enum{
USRP2_CLK_EDGE_RISE = 'r',
USRP2_CLK_EDGE_FALL = 'f'
} usrp2_clk_edge_t;
typedef enum{
USRP2_REG_ACTION_FPGA_PEEK32 = 1,
USRP2_REG_ACTION_FPGA_PEEK16 = 2,
USRP2_REG_ACTION_FPGA_POKE32 = 3,
USRP2_REG_ACTION_FPGA_POKE16 = 4,
USRP2_REG_ACTION_FW_PEEK32 = 5,
USRP2_REG_ACTION_FW_POKE32 = 6
} usrp2_reg_action_t;
typedef struct{
uint32_t proto_ver;
uint32_t id;
uint32_t seq;
union{
uint32_t ip_addr;
struct {
uint32_t dev;
uint32_t data;
uint8_t miso_edge;
uint8_t mosi_edge;
uint8_t num_bits;
uint8_t readback;
} spi_args;
struct {
uint8_t addr;
uint8_t bytes;
uint8_t data[20];
} i2c_args;
struct {
uint32_t addr;
uint32_t data;
uint8_t action;
} reg_args;
struct {
uint8_t dev;
uint8_t bytes;
uint8_t data[20];
} uart_args;
struct {
uint32_t len;
} echo_args;
} data;
} usrp2_ctrl_data_t;
#ifdef __cplusplus
}
#endif
#endif /* INCLUDED_USRP2_FW_COMMON_H */
|
