1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
|
//
// Copyright 2013 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
#ifndef INCLUDED_X300_REGS_HPP
#define INCLUDED_X300_REGS_HPP
#include <uhd/config.hpp>
#include <stdint.h>
#include <uhd/utils/soft_register.hpp>
static const int BL_ADDRESS = 0;
static const int BL_DATA = 1;
//wishbone settings map - relevant to host code
#define SET0_BASE 0xa000
#define SETXB_BASE 0xb000
#define BOOT_LDR_BASE 0xfa00
#define I2C0_BASE 0xfe00
#define I2C1_BASE 0xff00
#define SR_ADDR(base, offset) ((base) + (offset)*4)
static const int ZPU_SR_LEDS = 00;
static const int ZPU_SR_SW_RST = 01;
static const int ZPU_SR_CLOCK_CTRL = 02;
static const int ZPU_SR_XB_LOCAL = 03;
static const int ZPU_SR_SPI = 32;
static const int ZPU_SR_ETHINT0 = 40;
static const int ZPU_SR_ETHINT1 = 56;
static const int ZPU_SR_DRAM_FIFO0 = 72;
static const int ZPU_SR_DRAM_FIFO1 = 80;
//reset bits
#define ZPU_SR_SW_RST_ETH_PHY (1<<0)
#define ZPU_SR_SW_RST_RADIO_RST (1<<1)
#define ZPU_SR_SW_RST_RADIO_CLK_PLL (1<<2)
#define ZPU_SR_SW_RST_ADC_IDELAYCTRL (1<<3)
static const int ZPU_RB_SPI = 2;
static const int ZPU_RB_CLK_STATUS = 3;
static const int ZPU_RB_COMPAT_NUM = 6;
static const int ZPU_RB_NUM_CE = 7;
static const int ZPU_RB_GIT_HASH = 10;
static const int ZPU_RB_SFP0_TYPE = 4;
static const int ZPU_RB_SFP1_TYPE = 5;
static const uint32_t RB_SFP_1G_ETH = 0;
static const uint32_t RB_SFP_10G_ETH = 1;
static const uint32_t RB_SFP_AURORA = 2;
//spi slaves on radio
#define DB_DAC_SEN (1 << 7)
#define DB_ADC_SEN (1 << 6)
#define DB_RX_LSADC_SEN (1 << 5)
#define DB_RX_LSDAC_SEN (1 << 4)
#define DB_TX_LSADC_SEN (1 << 3)
#define DB_TX_LSDAC_SEN (1 << 2)
#define DB_RX_SEN (1 << 1)
#define DB_TX_SEN (1 << 0)
//-------------------------------------------------------------------
// PCIe Registers
//-------------------------------------------------------------------
static const uint32_t X300_PCIE_VID = 0x1093;
static const uint32_t X300_PCIE_PID = 0xC4C4;
//Rev 0-6 motherboard/PCIe IDs (ADC driven at 3.3V)
static const uint32_t X300_USRP_PCIE_SSID_ADC_33 = 0x7736;
static const uint32_t X310_USRP_PCIE_SSID_ADC_33 = 0x76CA;
static const uint32_t X310_2940R_40MHz_PCIE_SSID_ADC_33 = 0x772B;
static const uint32_t X310_2940R_120MHz_PCIE_SSID_ADC_33 = 0x77FB;
static const uint32_t X310_2942R_40MHz_PCIE_SSID_ADC_33 = 0x772C;
static const uint32_t X310_2942R_120MHz_PCIE_SSID_ADC_33 = 0x77FC;
static const uint32_t X310_2943R_40MHz_PCIE_SSID_ADC_33 = 0x772D;
static const uint32_t X310_2943R_120MHz_PCIE_SSID_ADC_33 = 0x77FD;
static const uint32_t X310_2944R_40MHz_PCIE_SSID_ADC_33 = 0x772E;
static const uint32_t X310_2950R_40MHz_PCIE_SSID_ADC_33 = 0x772F;
static const uint32_t X310_2950R_120MHz_PCIE_SSID_ADC_33 = 0x77FE;
static const uint32_t X310_2952R_40MHz_PCIE_SSID_ADC_33 = 0x7730;
static const uint32_t X310_2952R_120MHz_PCIE_SSID_ADC_33 = 0x77FF;
static const uint32_t X310_2953R_40MHz_PCIE_SSID_ADC_33 = 0x7731;
static const uint32_t X310_2953R_120MHz_PCIE_SSID_ADC_33 = 0x7800;
static const uint32_t X310_2954R_40MHz_PCIE_SSID_ADC_33 = 0x7732;
//Rev 7+ motherboard/PCIe IDs (ADCs driven at 1.8V)
static const uint32_t X300_USRP_PCIE_SSID_ADC_18 = 0x7861;
static const uint32_t X310_USRP_PCIE_SSID_ADC_18 = 0x7862;
static const uint32_t X310_2940R_40MHz_PCIE_SSID_ADC_18 = 0x7853;
static const uint32_t X310_2940R_120MHz_PCIE_SSID_ADC_18 = 0x785B;
static const uint32_t X310_2942R_40MHz_PCIE_SSID_ADC_18 = 0x7854;
static const uint32_t X310_2942R_120MHz_PCIE_SSID_ADC_18 = 0x785C;
static const uint32_t X310_2943R_40MHz_PCIE_SSID_ADC_18 = 0x7855;
static const uint32_t X310_2943R_120MHz_PCIE_SSID_ADC_18 = 0x785D;
static const uint32_t X310_2944R_40MHz_PCIE_SSID_ADC_18 = 0x7856;
static const uint32_t X310_2950R_40MHz_PCIE_SSID_ADC_18 = 0x7857;
static const uint32_t X310_2950R_120MHz_PCIE_SSID_ADC_18 = 0x785E;
static const uint32_t X310_2952R_40MHz_PCIE_SSID_ADC_18 = 0x7858;
static const uint32_t X310_2952R_120MHz_PCIE_SSID_ADC_18 = 0x785F;
static const uint32_t X310_2953R_40MHz_PCIE_SSID_ADC_18 = 0x7859;
static const uint32_t X310_2953R_120MHz_PCIE_SSID_ADC_18 = 0x7860;
static const uint32_t X310_2954R_40MHz_PCIE_SSID_ADC_18 = 0x785A;
static const uint32_t FPGA_X3xx_SIG_VALUE = 0x58333030;
static const uint32_t PCIE_FPGA_ADDR_BASE = 0xC0000;
#define PCIE_FPGA_REG(X) (PCIE_FPGA_ADDR_BASE + (X))
static const uint32_t FPGA_PCIE_SIG_REG = PCIE_FPGA_REG(0x0000);
static const uint32_t FPGA_CNTR_LO_REG = PCIE_FPGA_REG(0x0004);
static const uint32_t FPGA_CNTR_HI_REG = PCIE_FPGA_REG(0x0008);
static const uint32_t FPGA_CNTR_FREQ_REG = PCIE_FPGA_REG(0x000C);
static const uint32_t FPGA_STATUS_REG = PCIE_FPGA_REG(0x0020);
static const uint32_t FPGA_USR_SIG_REG_BASE = PCIE_FPGA_REG(0x0030);
static const uint32_t FPGA_USR_SIG_REG_SIZE = 16;
static const uint32_t FPGA_STATUS_DMA_ACTIVE_MASK = 0x3F3F0000;
static const uint32_t PCIE_TX_DMA_REG_BASE = PCIE_FPGA_REG(0x0200);
static const uint32_t PCIE_RX_DMA_REG_BASE = PCIE_FPGA_REG(0x0400);
static const uint32_t DMA_REG_GRP_SIZE = 16;
static const uint32_t DMA_CTRL_STATUS_REG = 0x0;
static const uint32_t DMA_FRAME_SIZE_REG = 0x4;
static const uint32_t DMA_SAMPLE_COUNT_REG = 0x8;
static const uint32_t DMA_PKT_COUNT_REG = 0xC;
#define PCIE_TX_DMA_REG(REG, CHAN) (PCIE_TX_DMA_REG_BASE + ((CHAN)*DMA_REG_GRP_SIZE) + (REG))
#define PCIE_RX_DMA_REG(REG, CHAN) (PCIE_RX_DMA_REG_BASE + ((CHAN)*DMA_REG_GRP_SIZE) + (REG))
static const uint32_t DMA_CTRL_DISABLED = 0x00000000;
static const uint32_t DMA_CTRL_ENABLED = 0x00000002;
static const uint32_t DMA_CTRL_CLEAR_STB = 0x00000001;
static const uint32_t DMA_CTRL_SW_BUF_U64 = (3 << 4);
static const uint32_t DMA_CTRL_SW_BUF_U32 = (2 << 4);
static const uint32_t DMA_CTRL_SW_BUF_U16 = (1 << 4);
static const uint32_t DMA_CTRL_SW_BUF_U8 = (0 << 4);
static const uint32_t DMA_STATUS_ERROR = 0x00000001;
static const uint32_t DMA_STATUS_BUSY = 0x00000002;
static const uint32_t PCIE_ROUTER_REG_BASE = PCIE_FPGA_REG(0x0500);
#define PCIE_ROUTER_REG(X) (PCIE_ROUTER_REG_BASE + (X))
static const uint32_t PCIE_ZPU_DATA_BASE = 0x30000;
static const uint32_t PCIE_ZPU_READ_BASE = 0x20000; //Trig and Status share the same base
static const uint32_t PCIE_ZPU_STATUS_BASE = 0x20000;
#define PCIE_ZPU_DATA_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_DATA_BASE) + (X))
#define PCIE_ZPU_READ_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_READ_BASE) + (X))
#define PCIE_ZPU_STATUS_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_STATUS_BASE) + (X))
static const uint32_t PCIE_ZPU_READ_START = 0x0;
static const uint32_t PCIE_ZPU_READ_CLOBBER = 0x80000000;
static const uint32_t PCIE_ZPU_STATUS_BUSY = 0x1;
static const uint32_t PCIE_ZPU_STATUS_SUSPENDED = 0x80000000;
//-------------------------------------------------------------------
// Register Maps
//-------------------------------------------------------------------
namespace uhd { namespace usrp { namespace x300 {
class fw_regmap_t : public uhd::soft_regmap_t {
public:
typedef boost::shared_ptr<fw_regmap_t> sptr;
class clk_ctrl_reg_t : public uhd::soft_reg32_wo_t {
public:
UHD_DEFINE_SOFT_REG_FIELD(CLK_SOURCE, /*width*/ 2, /*shift*/ 0); //[1:0]
UHD_DEFINE_SOFT_REG_FIELD(PPS_SELECT, /*width*/ 2, /*shift*/ 2); //[3:2]
UHD_DEFINE_SOFT_REG_FIELD(PPS_OUT_EN, /*width*/ 1, /*shift*/ 4); //[4]
UHD_DEFINE_SOFT_REG_FIELD(TCXO_EN, /*width*/ 1, /*shift*/ 5); //[5]
UHD_DEFINE_SOFT_REG_FIELD(GPSDO_PWR_EN, /*width*/ 1, /*shift*/ 6); //[6]
UHD_DEFINE_SOFT_REG_FIELD(TIME_SYNC, /*width*/ 1, /*shift*/ 7); //[7]
static const boost::uint32_t SRC_EXTERNAL = 0x0;
static const boost::uint32_t SRC_INTERNAL = 0x2;
static const boost::uint32_t SRC_GPSDO = 0x3;
clk_ctrl_reg_t(): uhd::soft_reg32_wo_t(SR_ADDR(SET0_BASE, ZPU_SR_CLOCK_CTRL)) {
//Initial values
set(CLK_SOURCE, SRC_INTERNAL);
set(PPS_SELECT, SRC_INTERNAL);
set(PPS_OUT_EN, 0);
set(TCXO_EN, 1);
set(GPSDO_PWR_EN, 1); //GPSDO power always ON
set(TIME_SYNC, 0);
}
} clock_ctrl_reg;
class clk_status_reg_t : public uhd::soft_reg32_ro_t {
public:
UHD_DEFINE_SOFT_REG_FIELD(LMK_STATUS, /*width*/ 2, /*shift*/ 0); //[1:0]
UHD_DEFINE_SOFT_REG_FIELD(LMK_LOCK, /*width*/ 1, /*shift*/ 2); //[2]
UHD_DEFINE_SOFT_REG_FIELD(LMK_HOLDOVER, /*width*/ 1, /*shift*/ 3); //[3]
UHD_DEFINE_SOFT_REG_FIELD(PPS_DETECT, /*width*/ 1, /*shift*/ 4); //[4]
UHD_DEFINE_SOFT_REG_FIELD(RADIO_CLK_LOCK, /*width*/ 1, /*shift*/ 5); //[5]
UHD_DEFINE_SOFT_REG_FIELD(IDELAYCTRL_LOCK, /*width*/ 1, /*shift*/ 6); //[6]
clk_status_reg_t(): uhd::soft_reg32_ro_t(SR_ADDR(SET0_BASE, ZPU_RB_CLK_STATUS)) {}
} clock_status_reg;
fw_regmap_t() : soft_regmap_t("fw_regmap") {
add_to_map(clock_ctrl_reg, "clock_ctrl_reg", PUBLIC);
add_to_map(clock_status_reg, "clock_status_reg", PUBLIC);
}
};
}}}
#endif /* INCLUDED_X300_REGS_HPP */
|
