blob: e4ae76a38b189bc87646ba42bc92c5c44da7d215 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
|
//
// Copyright 2013 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
#ifndef INCLUDED_X300_REGS_HPP
#define INCLUDED_X300_REGS_HPP
#include <boost/cstdint.hpp>
#define TOREG(x) ((x)*4)
#define localparam static const int
localparam SR_DACSYNC = 5;
localparam SR_LOOPBACK = 6;
localparam SR_TEST = 7;
localparam SR_SPI = 8;
localparam SR_GPIO = 16;
localparam SR_MISC_OUTS = 24;
localparam SR_READBACK = 32;
localparam SR_TX_CTRL = 64;
localparam SR_RX_CTRL = 96;
localparam SR_TIME = 128;
localparam SR_RX_DSP = 144;
localparam SR_TX_DSP = 184;
localparam SR_LEDS = 196;
localparam SR_FP_GPIO = 200;
localparam SR_RX_FRONT = 208;
localparam SR_TX_FRONT = 216;
localparam RB32_GPIO = 0;
localparam RB32_SPI = 4;
localparam RB64_TIME_NOW = 8;
localparam RB64_TIME_PPS = 16;
localparam RB32_TEST = 24;
localparam RB32_RX = 28;
localparam RB32_FP_GPIO = 32;
localparam BL_ADDRESS = 0;
localparam BL_DATA = 1;
//wishbone settings map - relevant to host code
#define SET0_BASE 0xa000
#define SETXB_BASE 0xb000
#define BOOT_LDR_BASE 0xFA00
#define I2C0_BASE 0xfe00
#define I2C1_BASE 0xff00
#define SR_ADDR(base, offset) ((base) + (offset)*4)
localparam ZPU_SR_LEDS = 00;
localparam ZPU_SR_PHY_RST = 01;
localparam ZPU_SR_CLOCK_CTRL = 02;
localparam ZPU_SR_XB_LOCAL = 03;
localparam ZPU_SR_SPI = 32;
localparam ZPU_SR_ETHINT0 = 40;
localparam ZPU_SR_ETHINT1 = 56;
localparam ZPU_RB_SPI = 2;
localparam ZPU_RB_CLK_STATUS = 3;
localparam ZPU_RB_COMPAT_NUM = 6;
localparam ZPU_RB_ETH_TYPE0 = 4;
localparam ZPU_RB_ETH_TYPE1 = 5;
//spi slaves on radio
#define DB_DAC_SEN (1 << 7)
#define DB_ADC_SEN (1 << 6)
#define DB_RX_LSADC_SEN (1 << 5)
#define DB_RX_LSDAC_SEN (1 << 4)
#define DB_TX_LSADC_SEN (1 << 3)
#define DB_TX_LSDAC_SEN (1 << 2)
#define DB_RX_SEN (1 << 1)
#define DB_TX_SEN (1 << 0)
//-------------------------------------------------------------------
// PCIe Registers
//-------------------------------------------------------------------
static const uint32_t X300_PCIE_VID = 0x1093;
static const uint32_t X300_PCIE_PID = 0xC4C4;
static const uint32_t X300_USRP_PCIE_SSID = 0x7736;
static const uint32_t X310_USRP_PCIE_SSID = 0x76CA;
static const uint32_t X310_2940R_PCIE_SSID = 0x772B;
static const uint32_t X310_2942R_PCIE_SSID = 0x772C;
static const uint32_t X310_2943R_PCIE_SSID = 0x772D;
static const uint32_t X310_2944R_PCIE_SSID = 0x772E;
static const uint32_t X310_2950R_PCIE_SSID = 0x772F;
static const uint32_t X310_2952R_PCIE_SSID = 0x7730;
static const uint32_t X310_2953R_PCIE_SSID = 0x7731;
static const uint32_t X310_2954R_PCIE_SSID = 0x7732;
static const uint32_t FPGA_X3xx_SIG_VALUE = 0x58333030;
static const uint32_t PCIE_FPGA_ADDR_BASE = 0xC0000;
#define PCIE_FPGA_REG(X) (PCIE_FPGA_ADDR_BASE + X)
static const uint32_t FPGA_PCIE_SIG_REG = PCIE_FPGA_REG(0x0000);
static const uint32_t FPGA_CNTR_LO_REG = PCIE_FPGA_REG(0x0004);
static const uint32_t FPGA_CNTR_HI_REG = PCIE_FPGA_REG(0x0008);
static const uint32_t FPGA_CNTR_FREQ_REG = PCIE_FPGA_REG(0x000C);
static const uint32_t FPGA_USR_SIG_REG_BASE = PCIE_FPGA_REG(0x0030);
static const uint32_t FPGA_USR_SIG_REG_SIZE = 16;
static const uint32_t PCIE_TX_DMA_REG_BASE = PCIE_FPGA_REG(0x0200);
static const uint32_t PCIE_RX_DMA_REG_BASE = PCIE_FPGA_REG(0x0400);
static const uint32_t DMA_REG_GRP_SIZE = 16;
static const uint32_t DMA_CTRL_STATUS_REG = 0x0;
static const uint32_t DMA_FRAME_SIZE_REG = 0x4;
static const uint32_t DMA_SAMPLE_COUNT_REG = 0x8;
static const uint32_t DMA_PKT_COUNT_REG = 0xC;
#define PCIE_TX_DMA_REG(REG, CHAN) (PCIE_TX_DMA_REG_BASE + (CHAN*DMA_REG_GRP_SIZE) + REG)
#define PCIE_RX_DMA_REG(REG, CHAN) (PCIE_RX_DMA_REG_BASE + (CHAN*DMA_REG_GRP_SIZE) + REG)
static const uint32_t DMA_CTRL_RESET = 1;
static const uint32_t DMA_CTRL_SW_BUF_U64 = (3 << 4);
static const uint32_t DMA_CTRL_SW_BUF_U32 = (2 << 4);
static const uint32_t DMA_CTRL_SW_BUF_U16 = (1 << 4);
static const uint32_t DMA_CTRL_SW_BUF_U8 = (0 << 4);
static const uint32_t DMA_STATUS_ERROR = 1;
static const uint32_t PCIE_ROUTER_REG_BASE = PCIE_FPGA_REG(0x0500);
#define PCIE_ROUTER_REG(X) (PCIE_ROUTER_REG_BASE + X)
static const uint32_t PCIE_ZPU_DATA_BASE = 0x30000;
static const uint32_t PCIE_ZPU_READ_BASE = 0x20000; //Trig and Status share the same base
static const uint32_t PCIE_ZPU_STATUS_BASE = 0x20000;
#define PCIE_ZPU_DATA_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_DATA_BASE) + X)
#define PCIE_ZPU_READ_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_READ_BASE) + X)
#define PCIE_ZPU_STATUS_REG(X) (PCIE_FPGA_REG(PCIE_ZPU_STATUS_BASE) + X)
static const uint32_t PCIE_ZPU_READ_START = 0x0;
static const uint32_t PCIE_ZPU_READ_CLOBBER = 0x80000000;
static const uint32_t PCIE_ZPU_STATUS_BUSY = 0x1;
static const uint32_t PCIE_ZPU_STATUS_SUSPENDED = 0x80000000;
#endif /* INCLUDED_X300_REGS_HPP */
|
