1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
|
//
// Copyright 2011-2012 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
#include "adf4350_regs.hpp"
#include "db_sbx_common.hpp"
using namespace uhd;
using namespace uhd::usrp;
using namespace boost::assign;
/***********************************************************************
* Structors
**********************************************************************/
sbx_xcvr::sbx_version3::sbx_version3(sbx_xcvr *_self_sbx_xcvr) {
//register the handle to our base SBX class
self_base = _self_sbx_xcvr;
}
sbx_xcvr::sbx_version3::~sbx_version3(void){
/* NOP */
}
/***********************************************************************
* Tuning
**********************************************************************/
double sbx_xcvr::sbx_version3::set_lo_freq(dboard_iface::unit_t unit, double target_freq) {
UHD_LOGV(often) << boost::format(
"SBX tune: target frequency %f Mhz"
) % (target_freq/1e6) << std::endl;
//clip the input
target_freq = sbx_freq_range.clip(target_freq);
//map prescaler setting to mininmum integer divider (N) values (pg.18 prescaler)
static const uhd::dict<int, int> prescaler_to_min_int_div = map_list_of
(0,23) //adf4350_regs_t::PRESCALER_4_5
(1,75) //adf4350_regs_t::PRESCALER_8_9
;
//map rf divider select output dividers to enums
static const uhd::dict<int, adf4350_regs_t::rf_divider_select_t> rfdivsel_to_enum = map_list_of
(1, adf4350_regs_t::RF_DIVIDER_SELECT_DIV1)
(2, adf4350_regs_t::RF_DIVIDER_SELECT_DIV2)
(4, adf4350_regs_t::RF_DIVIDER_SELECT_DIV4)
(8, adf4350_regs_t::RF_DIVIDER_SELECT_DIV8)
(16, adf4350_regs_t::RF_DIVIDER_SELECT_DIV16)
;
double actual_freq, pfd_freq;
double ref_freq = self_base->get_iface()->get_clock_rate(unit);
int R=0, BS=0, N=0, FRAC=0, MOD=0;
int RFdiv = 1;
adf4350_regs_t::reference_divide_by_2_t T = adf4350_regs_t::REFERENCE_DIVIDE_BY_2_DISABLED;
adf4350_regs_t::reference_doubler_t D = adf4350_regs_t::REFERENCE_DOUBLER_DISABLED;
//Reference doubler for 50% duty cycle
// if ref_freq < 12.5MHz enable regs.reference_divide_by_2
if(ref_freq <= 12.5e6) D = adf4350_regs_t::REFERENCE_DOUBLER_ENABLED;
//increase RF divider until acceptable VCO frequency
//start with target_freq*2 because mixer has divide by 2
double vco_freq = target_freq;
while (vco_freq < 2.2e9) {
vco_freq *= 2;
RFdiv *= 2;
}
//use 8/9 prescaler for vco_freq > 3 GHz (pg.18 prescaler)
adf4350_regs_t::prescaler_t prescaler = vco_freq > 3e9 ? adf4350_regs_t::PRESCALER_8_9 : adf4350_regs_t::PRESCALER_4_5;
/*
* The goal here is to loop though possible R dividers,
* band select clock dividers, N (int) dividers, and FRAC
* (frac) dividers.
*
* Calculate the N and F dividers for each set of values.
* The loop exists when it meets all of the constraints.
* The resulting loop values are loaded into the registers.
*
* from pg.21
*
* f_pfd = f_ref*(1+D)/(R*(1+T))
* f_vco = (N + (FRAC/MOD))*f_pfd
* N = f_vco/f_pfd - FRAC/MOD = f_vco*((R*(T+1))/(f_ref*(1+D))) - FRAC/MOD
* f_rf = f_vco/RFdiv)
* f_actual = f_rf/2
*/
for(R = 1; R <= 1023; R+=1){
//PFD input frequency = f_ref/R ... ignoring Reference doubler/divide-by-2 (D & T)
pfd_freq = ref_freq*(1+D)/(R*(1+T));
//keep the PFD frequency at or below 25MHz (Loop Filter Bandwidth)
if (pfd_freq > 25e6) continue;
//ignore fractional part of tuning
N = int(std::floor(vco_freq/pfd_freq));
//keep N > minimum int divider requirement
if (N < prescaler_to_min_int_div[prescaler]) continue;
for(BS=1; BS <= 255; BS+=1){
//keep the band select frequency at or below 100KHz
//constraint on band select clock
if (pfd_freq/BS > 100e3) continue;
goto done_loop;
}
} done_loop:
//Fractional-N calculation
MOD = 4095; //max fractional accuracy
FRAC = int((vco_freq/pfd_freq - N)*MOD);
//Reference divide-by-2 for 50% duty cycle
// if R even, move one divide by 2 to to regs.reference_divide_by_2
if(R % 2 == 0){
T = adf4350_regs_t::REFERENCE_DIVIDE_BY_2_ENABLED;
R /= 2;
}
//actual frequency calculation
actual_freq = double((N + (double(FRAC)/double(MOD)))*ref_freq*(1+int(D))/(R*(1+int(T)))/RFdiv);
UHD_LOGV(often)
<< boost::format("SBX Intermediates: ref=%0.2f, outdiv=%f, fbdiv=%f") % (ref_freq*(1+int(D))/(R*(1+int(T)))) % double(RFdiv*2) % double(N + double(FRAC)/double(MOD)) << std::endl
<< boost::format("SBX tune: R=%d, BS=%d, N=%d, FRAC=%d, MOD=%d, T=%d, D=%d, RFdiv=%d"
) % R % BS % N % FRAC % MOD % T % D % RFdiv << std::endl
<< boost::format("SBX Frequencies (MHz): REQ=%0.2f, ACT=%0.2f, VCO=%0.2f, PFD=%0.2f, BAND=%0.2f"
) % (target_freq/1e6) % (actual_freq/1e6) % (vco_freq/1e6) % (pfd_freq/1e6) % (pfd_freq/BS/1e6) << std::endl;
//load the register values
adf4350_regs_t regs;
if ((unit == dboard_iface::UNIT_TX) and (actual_freq == sbx_tx_lo_2dbm.clip(actual_freq)))
regs.output_power = adf4350_regs_t::OUTPUT_POWER_2DBM;
else
regs.output_power = adf4350_regs_t::OUTPUT_POWER_5DBM;
regs.frac_12_bit = FRAC;
regs.int_16_bit = N;
regs.mod_12_bit = MOD;
regs.prescaler = prescaler;
regs.r_counter_10_bit = R;
regs.reference_divide_by_2 = T;
regs.reference_doubler = D;
regs.band_select_clock_div = BS;
UHD_ASSERT_THROW(rfdivsel_to_enum.has_key(RFdiv));
regs.rf_divider_select = rfdivsel_to_enum[RFdiv];
//write the registers
//correct power-up sequence to write registers (5, 4, 3, 2, 1, 0)
int addr;
for(addr=5; addr>=0; addr--){
UHD_LOGV(often) << boost::format(
"SBX SPI Reg (0x%02x): 0x%08x"
) % addr % regs.get_reg(addr) << std::endl;
self_base->get_iface()->write_spi(
unit, spi_config_t::EDGE_RISE,
regs.get_reg(addr), 32
);
}
//return the actual frequency
UHD_LOGV(often) << boost::format(
"SBX tune: actual frequency %f Mhz"
) % (actual_freq/1e6) << std::endl;
return actual_freq;
}
|
