1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
|
//
// Copyright 2014 Ettus Research LLC
//
#ifndef INCLUDED_AD9361_DEVICE_H
#define INCLUDED_AD9361_DEVICE_H
#include <ad9361_client.h>
#include <boost/noncopyable.hpp>
#include <boost/thread/recursive_mutex.hpp>
namespace uhd { namespace usrp {
class ad9361_device_t : public boost::noncopyable
{
public:
enum direction_t { RX, TX };
enum chain_t { CHAIN_1, CHAIN_2 };
ad9361_device_t(ad9361_params::sptr client, ad9361_io::sptr io_iface) :
_client_params(client), _io_iface(io_iface) {}
/* Initialize the AD9361 codec. */
void initialize();
/* This function sets the RX / TX rate between AD9361 and the FPGA, and
* thus determines the interpolation / decimation required in the FPGA to
* achieve the user's requested rate.
*/
double set_clock_rate(const double req_rate);
/* Set which of the four TX / RX chains provided by AD9361 are active.
*
* AD9361 provides two sets of chains, Side A and Side B. Each side
* provides one TX antenna, and one RX antenna. The B200 maintains the USRP
* standard of providing one antenna connection that is both TX & RX, and
* one that is RX-only - for each chain. Thus, the possible antenna and
* chain selections are:
*
*/
void set_active_chains(bool tx1, bool tx2, bool rx1, bool rx2);
/* Tune the RX or TX frequency.
*
* This is the publicly-accessible tune function. It makes sure the tune
* isn't a redundant request, and if not, passes it on to the class's
* internal tune function.
*
* After tuning, it runs any appropriate calibrations. */
double tune(direction_t direction, const double value);
/* Set the gain of RX1, RX2, TX1, or TX2.
*
* Note that the 'value' passed to this function is the actual gain value,
* _not_ the gain index. This is the opposite of the eval software's GUI!
* Also note that the RX chains are done in terms of gain, and the TX chains
* are done in terms of attenuation. */
double set_gain(direction_t direction, chain_t chain, const double value);
/* Make AD9361 output its test tone. */
void output_test_tone();
/* Turn on/off AD9361's TX port --> RX port loopback. */
void data_port_loopback(const bool loopback_enabled);
/* Read back the internal RSSI measurement data. */
double get_rssi(chain_t chain);
//Constants
static const double AD9361_MAX_GAIN;
static const double AD9361_MAX_CLOCK_RATE;
static const double AD9361_RECOMMENDED_MAX_BANDWIDTH;
private: //Methods
void _program_fir_filter(direction_t direction, int num_taps, boost::uint16_t *coeffs);
void _setup_tx_fir(size_t num_taps, boost::int32_t interpolation);
void _setup_rx_fir(size_t num_taps, boost::int32_t decimation);
void _calibrate_lock_bbpll();
void _calibrate_synth_charge_pumps();
double _calibrate_baseband_rx_analog_filter();
double _calibrate_baseband_tx_analog_filter();
void _calibrate_secondary_tx_filter();
void _calibrate_rx_TIAs();
void _setup_adc();
void _calibrate_baseband_dc_offset();
void _calibrate_rf_dc_offset();
void _calibrate_rx_quadrature();
void _tx_quadrature_cal_routine();
void _calibrate_tx_quadrature();
void _program_mixer_gm_subtable();
void _program_gain_table();
void _setup_gain_control();
void _setup_synth(direction_t direction, double vcorate);
double _tune_bbvco(const double rate);
void _reprogram_gains();
double _tune_helper(direction_t direction, const double value);
double _setup_rates(const double rate);
private: //Members
typedef struct {
boost::uint8_t vcodivs;
boost::uint8_t inputsel;
boost::uint8_t rxfilt;
boost::uint8_t txfilt;
boost::uint8_t bbpll;
boost::uint8_t bbftune_config;
boost::uint8_t bbftune_mode;
} chip_regs_t;
//Interfaces
ad9361_params::sptr _client_params;
ad9361_io::sptr _io_iface;
//Intermediate state
double _rx_freq, _tx_freq, _req_rx_freq, _req_tx_freq;
double _baseband_bw, _bbpll_freq, _adcclock_freq;
double _req_clock_rate, _req_coreclk;
boost::uint16_t _rx_bbf_tunediv;
boost::uint8_t _curr_gain_table;
double _rx1_gain, _rx2_gain, _tx1_gain, _tx2_gain;
boost::int32_t _tfir_factor;
boost::int32_t _rfir_factor;
//Register soft-copies
chip_regs_t _regs;
//Synchronization
boost::recursive_mutex _mutex;
};
}} //namespace
#endif /* INCLUDED_AD9361_DEVICE_H */
|
