1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
|
.TH "uhd_image_loader" 1 "3.9.0" UHD "User Commands"
.SH NAME
uhd_image_loader - UHD Image Loader
.SH DESCRIPTION
Burn firmware and FPGA images onto connected Ettus Research devices.
.SH SYNOPSIS
.B uhd_image_loader [OPTIONS]
.SH OPTIONS
.IP "List options:"
--help
.IP "Device and loader arguments:"
--args=""
.IP "Custom firmware filepath:"
--fw-path=""
.IP "Custom FPGA filepath:"
--fpga-path=""
.IP "Don't burn firmware:"
--no-fw
.IP "Don't burn FPGA:"
--no-fpga
.SH SPECIFYING A PARTICULAR DEVICE
.sp
Without any arguments given through the \fIargs=""\fR option, this utility will start a session
with the first Ettus Research device it sees. The arguments shown below will narrow down the
utility's search for a particular device:
.SS All devices
.sp
The \fIname=\fR and \fIserial=\fR arguments can be used to specify any device except an
uninitialized USB device or an OctoClock bootloader. The \fItype=\fR argument can be used
to specify any device, as described below:
"type=" argument
Argument | Device
type=usrp2 | USRP N200, USRP N210
type=b200 | USRP B200, USRP B210
type=e100 | USRP E100, USRP E110
type=e3x0 | USRP E310
type=octoclock | OctoClock
.sp
NOTE: The USRP1, USRP2, and USRP B100 are not supported.
.SS Network devices
.sp
By default, this utility will check all network interfaces for network-based devices, but a specific
IP address can be specified with the \fIaddr=\fR argument.
.SS NI-RIO devices
.sp
An X-Series devices connected via PCIe can be specified by its NI-RIO resource through the \fIresource=\fR
argument, and the RPC port through which to communicate with it can be specified with the \fIrpc-port=\fR
argument. Using these options is not recommended, as their default values are almost always used.
.SS OctoClock devices
An OctoClock's name and serial are only exposed when the firmware is loaded, so if the device only has a
bootloader, only the \fIaddr=\fR argument can be used to find it.
.SH DEVICE-SPECIFIC LOADER OPTIONS
.sp
Certain devices have specific options for customizing their image loading process, and these can be passed
in through the \fI--args=""\fR option. These arguments are specified below:
.SS USRP N200, USRP N210
.sp
The \fIoverwrite-safe\fR option will overwrite the device's safe-mode firmware and FPGA images. This is
NOT RECOMMENDED, as these images serve as the backup if the device's primary images are corrupted.
.sp
The \fIreset\fR option will automatically reset the device once the loading process finishes. When the
device resets, it will have its new images loaded.
.SS USRP X300, USRP X310 (Ethernet only)
.sp
The \fIconfigure\fR option will automatically reset the device once the loading process finishes. When
the device resets, it will have its new FPGA image loaded.
.sp
The \fIverify\fR option will tell the device to internally verify the integrity of the image as it loads.
This greatly increases the loading time.
.SH EXAMPLES
.SS Load only the default FPGA image onto a specific N2x0 device and reset
.sp
uhd_image_loader --args="type=usrp2,addr=192.168.10.2,reset" --no-fw
.ft
.SS Load a custom FPGA image onto a specific X3x0 device
.sp
uhd_image_loader --args="type=x300,addr=192.168.40.2" --fpga-path="/home/user/my_x300_fpga_image.bit"
.ft
.fi
.SH SEE ALSO
UHD documentation:
.B http://files.ettus.com/manual/
.LP
GR-UHD documentation:
.B http://gnuradio.org/doc/doxygen/page_uhd.html
.LP
Other UHD programs:
.sp
uhd_images_downloader(1) usrp2_card_burner(1)
.SH AUTHOR
This manual page was written by Nicholas Corgan
for the Debian project (but may be used by others).
.SH COPYRIGHT
Copyright (c) 2015 Ettus Research LLC
.LP
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
.LP
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
|
