1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
|
module gen_ddrlvds
(
// 2X Radio clock
input tx_clk_2x,
// 1X Radio Clock
input tx_clk_1x,
// Reset signal synchronous to radio clock
input reset,
// Source synchronous differential clocks to DAC
output tx_clk_2x_p,
output tx_clk_2x_n,
// Differential frame sync to DAC
output tx_frame_p,
output tx_frame_n,
// Differential byte wide data to DAC.
// Alternates I[15:8],I[7:0],Q[15:8],Q[7:0]
output [7:0] tx_d_p,
output [7:0] tx_d_n,
// Input data
input [15:0] i,
input [15:0] q,
// Rising edge sampled on sync_dacs triggers frame sync sequence
input sync_dacs
);
reg [15:0] i_reg, q_reg;
reg [15:0] i_2x, q_2x;
reg phase, phase_2x;
reg rising_edge;
wire [15:0] i_and_q_2x;
reg sync_2x;
genvar z;
wire [7:0] tx_int;
wire tx_clk_2x_int;
wire tx_frame_int;
(* keep = "true", max_fanout = 10 *) wire phase_eq_phase2x = (phase == phase_2x);
always @(posedge tx_clk_1x)
if (reset)
phase <= 1'b0;
else
phase <= ~phase;
//
// Pipeline input data so that 1x to 2x clock domain jump includes no logic external to this module.
//
always @(posedge tx_clk_1x)
begin
i_reg <= i;
q_reg <= q;
end
always @(posedge tx_clk_2x)
begin
// Move 1x data to 2x domain, mostly just to add pipeline regs
// for timing closure.
i_2x <= i_reg;
q_2x <= q_reg;
// Sample phase to determine when 1x clock edges occur.
// To sync multiple AD9146 DAC's an extended assertion of FRAME is required,
// when sync flag set, squash one rising_edge assertion which causes a 3 word assertion of FRAME,
// also reset sync flag. "sync_dacs" comes from 1x clk and pulse lasts 2 2x clock cycles...this is accounted for.
sync_2x <= (phase_eq_phase2x && sync_2x) ? 1'b0 /*RESET */ : (sync_dacs) ? 1'b1 /* SET */ : sync_2x /* HOLD */;
rising_edge <= (phase_eq_phase2x && ~sync_2x);
phase_2x <= phase;
end
// Interleave I and Q as SDR signals
assign i_and_q_2x = rising_edge ? q_2x : i_2x;
generate
for(z = 0; z < 8; z = z + 1)
begin : gen_pins
OBUFDS obufds (.I(tx_int[z]), .O(tx_d_p[z]), .OB(tx_d_n[z]));
ODDR #(.DDR_CLK_EDGE("SAME_EDGE")) oddr
(.Q(tx_int[z]), .C(tx_clk_2x),
.CE(1'b1), .D1(i_and_q_2x[z+8]), .D2(i_and_q_2x[z]), .S(1'b0), .R(1'b0));
end
endgenerate
// Generate framing signal to identify I and Q
OBUFDS obufds_frame (.I(tx_frame_int), .O(tx_frame_p), .OB(tx_frame_n));
ODDR #(.DDR_CLK_EDGE("SAME_EDGE")) oddr_frame
(.Q(tx_frame_int), .C(tx_clk_2x),
.CE(1'b1), .D1(~rising_edge), .D2(~rising_edge), .S(1'b0), .R(1'b0));
// Source synchronous clk
OBUFDS obufds_clk (.I(tx_clk_2x_int), .O(tx_clk_2x_p), .OB(tx_clk_2x_n));
ODDR #(.DDR_CLK_EDGE("SAME_EDGE")) oddr_clk
(.Q(tx_clk_2x_int), .C(tx_clk_2x),
.CE(1'b1), .D1(1'b1), .D2(1'b0), .S(1'b0), .R(1'b0));
endmodule // gen_ddrlvds
|
