blob: b8282ed639dacc3fdf85ee6ccff7cfdbc238ac2d (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
|
#
# Copyright 2017 Ettus Research, A National Instruments Company
# SPDX-License-Identifier: LGPL-3.0
#
# Declare the 133 MHz DRAM subsystem clock.
create_generated_clock -name ddr3_ext_refclk -period 7.5 [get_ports sys_clk_p]
# Rename IODELAY reference clock outputs from the MMCM inside MIG.
# These are based off the 200 MHz bus_clk.
create_generated_clock -name ddr3_iodelay_refclk \
[get_pins {u_ddr3_32bit/u_ddr3_32bit_mig/u_iodelay_ctrl/clk_ref_mmcm_gen.mmcm_i/CLKOUT1}]
create_generated_clock -name ddr3_iodelay_refclk_fb \
[get_pins {u_ddr3_32bit/u_ddr3_32bit_mig/u_iodelay_ctrl/clk_ref_mmcm_gen.mmcm_i/CLKFBOUT}]
# Rename the UI clock appropriately. This clocks the slave AXI4 ports of the MIG as well
# as the AXI logic/interconnects in the remainder of the FPGA design. Should be 200 MHz.
create_generated_clock -name ddr3_ui_clk \
[get_pins {u_ddr3_32bit/u_ddr3_32bit_mig/u_ddr3_infrastructure/gen_mmcm.mmcm_i/CLKFBOUT}]
# Another UI clock at 300 MHz... not quite at 2x due to timing.
create_generated_clock -name ddr3_ui_clk_2x \
[get_pins {u_ddr3_32bit/u_ddr3_32bit_mig/u_ddr3_infrastructure/gen_mmcm.mmcm_i/CLKOUT0}]
# Phase shifting clock for the MIG. Drives a few resets.
create_generated_clock -name ddr3_ps_clk \
[get_pins {u_ddr3_32bit/u_ddr3_32bit_mig/u_ddr3_infrastructure/gen_mmcm.mmcm_i/CLKOUT5}]
|
