path: root/fpga/usrp3/top/b200/b200_core.v

//
// Copyright 2013-14 Ettus Research LLC
//


/***********************************************************
 * B200 Core Guts
 **********************************************************/
module b200_core
#(
    parameter R0_CTRL_SID = 8'h10,
    parameter R1_CTRL_SID = 8'h20,
    parameter U0_CTRL_SID = 8'h30,
    parameter L0_CTRL_SID = 8'h40,
    parameter R0_DATA_SID = 8'h50,
    parameter R1_DATA_SID = 8'h60,
    parameter DEMUX_SID_MASK = 8'hf0,
    parameter EXTRA_BUFF_SIZE = 0,
    parameter RADIO_FIFO_SIZE = 12,
    parameter SAMPLE_FIFO_SIZE = 11
 
)
(
    ////////////////////////////////////////////////////////////////////
    // bus interfaces
    ////////////////////////////////////////////////////////////////////
    input bus_clk,
    input bus_rst,

    input [63:0] tx_tdata, input tx_tlast, input tx_tvalid, output tx_tready,
    output [63:0] rx_tdata, output rx_tlast, output rx_tvalid, input rx_tready,
    input [63:0] ctrl_tdata, input ctrl_tlast, input ctrl_tvalid, output ctrl_tready,
    output [63:0] resp_tdata, output resp_tlast, output resp_tvalid, input resp_tready,

    ////////////////////////////////////////////////////////////////////
    // radio interfaces
    ////////////////////////////////////////////////////////////////////
    input radio_clk,
    input radio_rst,

    input [31:0] rx0, input [31:0] rx1,
    output [31:0] tx0, output [31:0] tx1,
    inout [31:0] fe_atr0,
    inout [31:0] fe_atr1,
    input pps_int, input pps_ext,

    ////////////////////////////////////////////////////////////////////
    // gpsdo uart
    ////////////////////////////////////////////////////////////////////
    input rxd,
    output txd,

    ////////////////////////////////////////////////////////////////////
    // core interfaces
    ////////////////////////////////////////////////////////////////////
    output [7:0] sen, output sclk, output mosi, input miso,
    input [31:0] rb_misc,
    output [31:0] misc_outs,
    ////////////////////////////////////////////////////////////////////
    // debug UART
    ////////////////////////////////////////////////////////////////////
    output debug_txd, input debug_rxd,
    input debug_scl, input debug_sda,
    ////////////////////////////////////////////////////////////////////
    // debug signals
    ////////////////////////////////////////////////////////////////////
    output [63:0] debug
);
    localparam SR_CORE_SPI       = 8'd8;
    localparam SR_CORE_MISC      = 8'd16;
    localparam SR_CORE_COMPAT    = 8'd24;
    localparam SR_CORE_READBACK  = 8'd32;
    localparam SR_CORE_GPSDO_ST  = 8'd40;
    localparam SR_CORE_PPS_SEL   = 8'd48;
    localparam COMPAT_MAJOR      = 16'h0003;
    localparam COMPAT_MINOR      = 16'h0000;

    /*******************************************************************
     * PPS Timing stuff
     ******************************************************************/

    // Generate an internal PPS signal
    wire int_pps;
    pps_generator #(.CLK_FREQ(100000000)) pps_gen
    (.clk(bus_clk), .pps(int_pps));

    // Flop PPS signals into radio clock domain
    reg [1:0] 	 gpsdo_pps_del, ext_pps_del, int_pps_del;
    always @(posedge radio_clk) ext_pps_del[1:0] <= {ext_pps_del[0], pps_ext};
    always @(posedge radio_clk) gpsdo_pps_del[1:0] <= {gpsdo_pps_del[0], pps_int};
    always @(posedge radio_clk) int_pps_del[1:0] <= {int_pps_del[0], int_pps};

    // PPS mux
    wire [1:0] pps_select;
    wire pps =  (pps_select == 2'b00)? gpsdo_pps_del[1] :
                (pps_select == 2'b01)? ext_pps_del[1] :
                (pps_select == 2'b10)? int_pps_del[1] :
                1'b0;

    /*******************************************************************
     * Response mux Routing logic
     ******************************************************************/
    wire [63:0] r0_resp_tdata; wire r0_resp_tlast, r0_resp_tvalid, r0_resp_tready;
    wire [63:0] r1_resp_tdata; wire r1_resp_tlast, r1_resp_tvalid, r1_resp_tready;
    wire [63:0] u0_resp_tdata; wire u0_resp_tlast, u0_resp_tvalid, u0_resp_tready;
    wire [63:0] l0_resp_tdata; wire l0_resp_tlast, l0_resp_tvalid, l0_resp_tready;

    axi_mux4 #(.WIDTH(64), .BUFFER(1)) mux_for_resp
     (.clk(bus_clk), .reset(bus_rst), .clear(1'b0),
      .i0_tdata(r0_resp_tdata), .i0_tlast(r0_resp_tlast), .i0_tvalid(r0_resp_tvalid), .i0_tready(r0_resp_tready),
      .i1_tdata(r1_resp_tdata), .i1_tlast(r1_resp_tlast), .i1_tvalid(r1_resp_tvalid), .i1_tready(r1_resp_tready),
      .i2_tdata(u0_resp_tdata), .i2_tlast(u0_resp_tlast), .i2_tvalid(u0_resp_tvalid), .i2_tready(u0_resp_tready),
      .i3_tdata(l0_resp_tdata), .i3_tlast(l0_resp_tlast), .i3_tvalid(l0_resp_tvalid), .i3_tready(l0_resp_tready),
      .o_tdata(resp_tdata), .o_tlast(resp_tlast), .o_tvalid(resp_tvalid), .o_tready(resp_tready));

    /*******************************************************************
     * Control demux Routing logic
     ******************************************************************/
    wire [63:0] r0_ctrl_tdata; wire r0_ctrl_tlast, r0_ctrl_tvalid, r0_ctrl_tready;
    wire [63:0] r1_ctrl_tdata; wire r1_ctrl_tlast, r1_ctrl_tvalid, r1_ctrl_tready;
    wire [63:0] u0_ctrl_tdata; wire u0_ctrl_tlast, u0_ctrl_tvalid, u0_ctrl_tready;
    wire [63:0] l0_ctrl_tdata; wire l0_ctrl_tlast, l0_ctrl_tvalid, l0_ctrl_tready;

    wire [63:0] ctrl_hdr;
    wire [1:0] ctrl_dst =
        ((ctrl_hdr[7:0] & DEMUX_SID_MASK) == R0_CTRL_SID)? 0 : (
        ((ctrl_hdr[7:0] & DEMUX_SID_MASK) == R1_CTRL_SID)? 1 : (
        ((ctrl_hdr[7:0] & DEMUX_SID_MASK) == U0_CTRL_SID)? 2 : (
        ((ctrl_hdr[7:0] & DEMUX_SID_MASK) == L0_CTRL_SID)? 3 : (
    3))));
    axi_demux4 #(.ACTIVE_CHAN(4'b1111), .WIDTH(64), .BUFFER(1)) demux_for_ctrl
     (.clk(bus_clk), .reset(bus_rst), .clear(1'b0),
      .header(ctrl_hdr), .dest(ctrl_dst),
      .i_tdata(ctrl_tdata), .i_tlast(ctrl_tlast), .i_tvalid(ctrl_tvalid), .i_tready(ctrl_tready),
      .o0_tdata(r0_ctrl_tdata), .o0_tlast(r0_ctrl_tlast), .o0_tvalid(r0_ctrl_tvalid), .o0_tready(r0_ctrl_tready),
      .o1_tdata(r1_ctrl_tdata), .o1_tlast(r1_ctrl_tlast), .o1_tvalid(r1_ctrl_tvalid), .o1_tready(r1_ctrl_tready),
      .o2_tdata(u0_ctrl_tdata), .o2_tlast(u0_ctrl_tlast), .o2_tvalid(u0_ctrl_tvalid), .o2_tready(u0_ctrl_tready),
      .o3_tdata(l0_ctrl_tdata), .o3_tlast(l0_ctrl_tlast), .o3_tvalid(l0_ctrl_tvalid), .o3_tready(l0_ctrl_tready));

    /*******************************************************************
     * UART
     ******************************************************************/
    wire [63:0] u0i_ctrl_tdata; wire u0i_ctrl_tlast, u0i_ctrl_tvalid, u0i_ctrl_tready;

    axi_fifo #(.WIDTH(65), .SIZE(0)) uart_timing_fifo
    (
        .clk(bus_clk), .reset(bus_rst), .clear(1'b0),
        .i_tdata({u0_ctrl_tlast, u0_ctrl_tdata}), .i_tvalid(u0_ctrl_tvalid), .i_tready(u0_ctrl_tready), .space(),
        .o_tdata({u0i_ctrl_tlast, u0i_ctrl_tdata}), .o_tvalid(u0i_ctrl_tvalid), .o_tready(u0i_ctrl_tready), .occupied()
    );

    cvita_uart #(.SIZE(7)) uart
    (
        .clk(bus_clk), .rst(bus_rst), .rxd(rxd), .txd(txd),
        .i_tdata(u0i_ctrl_tdata), .i_tlast(u0i_ctrl_tlast), .i_tvalid(u0i_ctrl_tvalid), .i_tready(u0i_ctrl_tready),
        .o_tdata(u0_resp_tdata), .o_tlast(u0_resp_tlast), .o_tvalid(u0_resp_tvalid), .o_tready(u0_resp_tready)
    );

    /*******************************************************************
     * Misc controls
     ******************************************************************/
    wire 	set_stb;
    wire [7:0] 	set_addr;
    wire [31:0] 	set_data;

    wire spi_ready;
    wire [31:0] spi_readback;

    wire [7:0] gpsdo_st;
    wire [7:0] radio_st;

    wire [1:0] rb_addr;
    reg [63:0] rb_data;

    wire [63:0] l0i_ctrl_tdata; wire l0i_ctrl_tlast, l0i_ctrl_tvalid, l0i_ctrl_tready;

    axi_fifo #(.WIDTH(65), .SIZE(0)) radio_ctrl_proc_timing_fifo
    (
        .clk(bus_clk), .reset(bus_rst), .clear(1'b0),
        .i_tdata({l0_ctrl_tlast, l0_ctrl_tdata}), .i_tvalid(l0_ctrl_tvalid), .i_tready(l0_ctrl_tready), .space(),
        .o_tdata({l0i_ctrl_tlast, l0i_ctrl_tdata}), .o_tvalid(l0i_ctrl_tvalid), .o_tready(l0i_ctrl_tready), .occupied()
    );

    radio_ctrl_proc radio_ctrl_proc
     (.clk(bus_clk), .reset(bus_rst), .clear(1'b0),
      .ctrl_tdata(l0i_ctrl_tdata), .ctrl_tlast(l0i_ctrl_tlast), .ctrl_tvalid(l0i_ctrl_tvalid), .ctrl_tready(l0i_ctrl_tready),
      .resp_tdata(l0_resp_tdata), .resp_tlast(l0_resp_tlast), .resp_tvalid(l0_resp_tvalid), .resp_tready(l0_resp_tready),
      .vita_time(64'b0),
      .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
      .ready(spi_ready), .readback(rb_data),
      .debug());

    setting_reg #(.my_addr(SR_CORE_MISC), .awidth(8), .width(32), .at_reset(8'h0)) sr_misc
     (.clk(bus_clk), .rst(bus_rst), .strobe(set_stb), .addr(set_addr), .in(set_data),
      .out(misc_outs), .changed());

    setting_reg #(.my_addr(SR_CORE_READBACK), .awidth(8), .width(2)) sr_rdback
     (.clk(bus_clk), .rst(bus_rst), .strobe(set_stb), .addr(set_addr), .in(set_data),
      .out(rb_addr), .changed());

    setting_reg #(.my_addr(SR_CORE_GPSDO_ST), .awidth(8), .width(8)) sr_gpsdo_st
     (.clk(bus_clk), .rst(1'b0/*keep*/), .strobe(set_stb), .addr(set_addr), .in(set_data),
      .out(gpsdo_st), .changed());

    setting_reg #(.my_addr(SR_CORE_PPS_SEL), .awidth(8), .width(2)) sr_pps_sel
     (.clk(bus_clk), .rst(bus_rst), .strobe(set_stb), .addr(set_addr), .in(set_data),
      .out(pps_select), .changed());

    simple_spi_core #(.BASE(SR_CORE_SPI), .WIDTH(8), .CLK_IDLE(0), .SEN_IDLE(8'hFF)) misc_spi
     (.clock(bus_clk), .reset(bus_rst),
      .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
      .readback(spi_readback), .ready(spi_ready),
      .sen(sen), .sclk(sclk), .mosi(mosi), .miso(miso),
      .debug());

    always @*
     case(rb_addr)
       2'd0 : rb_data <= { 32'hACE0BA5E, COMPAT_MAJOR, COMPAT_MINOR };
       2'd1 : rb_data <= { 32'b0, spi_readback };
       2'd2 : rb_data <= { 16'b0, radio_st, gpsdo_st, rb_misc };
       default : rb_data <= 64'd0;
     endcase // case (rb_addr)

    /*******************************************************************
     * RX Data mux Routing logic
     ******************************************************************/
    wire [63:0] r0_rx_tdata; wire r0_rx_tlast, r0_rx_tvalid, r0_rx_tready;
    wire [63:0] r1_rx_tdata; wire r1_rx_tlast, r1_rx_tvalid, r1_rx_tready;
    wire [63:0] rx_tdata_int; wire rx_tlast_int, rx_tvalid_int, rx_tready_int;

   axi_mux4 #(.WIDTH(64), .BUFFER(1)) mux_for_rx
     (.clk(bus_clk), .reset(bus_rst), .clear(1'b0),
      .i0_tdata(r0_rx_tdata), .i0_tlast(r0_rx_tlast), .i0_tvalid(r0_rx_tvalid), .i0_tready(r0_rx_tready),
      .i1_tdata(r1_rx_tdata), .i1_tlast(r1_rx_tlast), .i1_tvalid(r1_rx_tvalid), .i1_tready(r1_rx_tready),
      .i2_tdata(64'b0), .i2_tlast(1'b0), .i2_tvalid(1'b0), .i2_tready(),
      .i3_tdata(64'b0), .i3_tlast(1'b0), .i3_tvalid(1'b0), .i3_tready(),
      .o_tdata(rx_tdata_int), .o_tlast(rx_tlast_int), .o_tvalid(rx_tvalid_int), .o_tready(rx_tready_int));

    axi_fifo #(.WIDTH(65), .SIZE(EXTRA_BUFF_SIZE)) extra_rx_buff
     (.clk(bus_clk), .reset(bus_rst),
      .i_tdata({rx_tlast_int, rx_tdata_int}), .i_tvalid(rx_tvalid_int), .i_tready(rx_tready_int),
      .o_tdata({rx_tlast, rx_tdata}), .o_tvalid(rx_tvalid), .o_tready(rx_tready));

    /*******************************************************************
     * TX Data mux Routing logic
     ******************************************************************/
    wire [63:0] r0_tx_tdata; wire r0_tx_tlast, r0_tx_tvalid, r0_tx_tready;
    wire [63:0] r1_tx_tdata; wire r1_tx_tlast, r1_tx_tvalid, r1_tx_tready;
    wire [63:0] tx_tdata_int; wire tx_tlast_int, tx_tvalid_int, tx_tready_int;

    axi_fifo #(.WIDTH(65), .SIZE(EXTRA_BUFF_SIZE)) extra_tx_buff
     (.clk(bus_clk), .reset(bus_rst),
      .i_tdata({tx_tlast, tx_tdata}), .i_tvalid(tx_tvalid), .i_tready(tx_tready),
      .o_tdata({tx_tlast_int, tx_tdata_int}), .o_tvalid(tx_tvalid_int), .o_tready(tx_tready_int));

    wire [63:0] tx_hdr;
    wire [1:0] tx_dst =
        ((tx_hdr[7:0] & DEMUX_SID_MASK) == R0_DATA_SID)? 0 : (
        ((tx_hdr[7:0] & DEMUX_SID_MASK) == R1_DATA_SID)? 1 : (
    3));
    axi_demux4 #(.ACTIVE_CHAN(4'b0011), .WIDTH(64), .BUFFER(1)) demux_for_tx
     (.clk(bus_clk), .reset(bus_rst), .clear(1'b0),
      .header(tx_hdr), .dest(tx_dst),
      .i_tdata(tx_tdata_int), .i_tlast(tx_tlast_int), .i_tvalid(tx_tvalid_int), .i_tready(tx_tready_int),
      .o0_tdata(r0_tx_tdata), .o0_tlast(r0_tx_tlast), .o0_tvalid(r0_tx_tvalid), .o0_tready(r0_tx_tready),
      .o1_tdata(r1_tx_tdata), .o1_tlast(r1_tx_tlast), .o1_tvalid(r1_tx_tvalid), .o1_tready(r1_tx_tready),
      .o2_tdata(), .o2_tlast(), .o2_tvalid(), .o2_tready(1'b1),
      .o3_tdata(), .o3_tlast(), .o3_tvalid(), .o3_tready(1'b1));

    /*******************************************************************
     * Radio 0
     ******************************************************************/
   wire [63:0] radio0_debug;
   
   radio_b200 #(.RADIO_FIFO_SIZE(RADIO_FIFO_SIZE),.SAMPLE_FIFO_SIZE(SAMPLE_FIFO_SIZE)) radio_0
    (
        .radio_clk(radio_clk), .radio_rst(radio_rst),
        .rx(rx0), .tx(tx0), .fe_atr(fe_atr0), .pps(pps),

        .bus_clk(bus_clk), .bus_rst(bus_rst),
        .tx_tdata(r0_tx_tdata), .tx_tlast(r0_tx_tlast), .tx_tvalid(r0_tx_tvalid), .tx_tready(r0_tx_tready),
        .rx_tdata(r0_rx_tdata), .rx_tlast(r0_rx_tlast),  .rx_tvalid(r0_rx_tvalid), .rx_tready(r0_rx_tready),
        .ctrl_tdata(r0_ctrl_tdata), .ctrl_tlast(r0_ctrl_tlast),  .ctrl_tvalid(r0_ctrl_tvalid), .ctrl_tready(r0_ctrl_tready),
        .resp_tdata(r0_resp_tdata), .resp_tlast(r0_resp_tlast),  .resp_tvalid(r0_resp_tvalid), .resp_tready(r0_resp_tready),

        .debug(radio0_debug)
    );

    /*******************************************************************
     * Radio 1
     ******************************************************************/
    `ifdef B200_CAN_HAZ_R1
    assign radio_st = 8'h2;
   wire [63:0] radio1_debug;
   
    radio_b200 #(.RADIO_FIFO_SIZE(RADIO_FIFO_SIZE),.SAMPLE_FIFO_SIZE(SAMPLE_FIFO_SIZE)) radio_1
    (
        .radio_clk(radio_clk), .radio_rst(radio_rst),
        .rx(rx1), .tx(tx1), .fe_atr(fe_atr1), .pps(pps),

        .bus_clk(bus_clk), .bus_rst(bus_rst),
        .tx_tdata(r1_tx_tdata), .tx_tlast(r1_tx_tlast), .tx_tvalid(r1_tx_tvalid), .tx_tready(r1_tx_tready),
        .rx_tdata(r1_rx_tdata), .rx_tlast(r1_rx_tlast),  .rx_tvalid(r1_rx_tvalid), .rx_tready(r1_rx_tready),
        .ctrl_tdata(r1_ctrl_tdata), .ctrl_tlast(r1_ctrl_tlast),  .ctrl_tvalid(r1_ctrl_tvalid), .ctrl_tready(r1_ctrl_tready),
        .resp_tdata(r1_resp_tdata), .resp_tlast(r1_resp_tlast),  .resp_tvalid(r1_resp_tvalid), .resp_tready(r1_resp_tready),

        .debug(radio1_debug)
    );

    `else
    assign radio_st = 8'h1;

    //assign undriven outputs
    assign fe_atr1 = 8'b0;
    assign tx1 = 32'b0;

    //unused control signals -- leave in loopback
    assign r1_resp_tdata = r1_ctrl_tdata;
    assign r1_resp_tlast = r1_ctrl_tlast;
    assign r1_resp_tvalid = r1_ctrl_tvalid;
    assign r1_ctrl_tready = r1_resp_tready;

    //unused data signals -- leave in loopback
    assign r1_rx_tdata = r1_tx_tdata;
    assign r1_rx_tlast = r1_tx_tlast;
    assign r1_rx_tvalid = r1_tx_tvalid;
    assign r1_tx_tready = r1_tx_tready;

    `endif // !`ifdef B200_CAN_HAZ_R1

   /*******************************************************************
    * Debug UART for FX3
    ******************************************************************/
   wire    debug_stb;
   wire [31:0] debug_data;
   wire [7:0]  debug_addr;
   wire [31:0] debug_serial;
 
   
   serial_to_settings serial_to_settings_i1
     (
      .clk(bus_clk),
      .reset(bus_rst),
      .scl(debug_scl),
      .sda(debug_sda),
      .set_stb(debug_stb),
      .set_addr(debug_addr),
      .set_data(debug_data),
      .debug(debug_serial)
      );

   // Nasty HAck to convert settings to wishbone crudely.
   reg 	       wb_stb;
   wire        wb_ack_o;
   
   
   always @(posedge bus_clk)
     wb_stb <= debug_stb ? 1 : ((wb_ack_o) ? 0 : wb_stb);
   
   
   
   simple_uart debug_uart
     (
      .clk_i(bus_clk), 
      .rst_i(bus_rst),
      .we_i(wb_stb), 
      .stb_i(wb_stb), 
      .cyc_i(wb_stb), 
      .ack_o(wb_ack_o),
      .adr_i(debug_addr[2:0]), 
      .dat_i(debug_data[31:0]), 
      .dat_o(),
      .rx_int_o(), 
      .tx_int_o(), 
      .tx_o(debug_txd), 
      .rx_i(debug_rxd), 
      .baud_o()
      );

   //
   // Debug
   //
/* -----\/----- EXCLUDED -----\/-----

   wire [35:0] CONTROL0;
   
   chipscope_ila_128 chipscope_ila_i0
     (
      .CONTROL(CONTROL0), // INOUT BUS [35:0]
      .CLK(bus_clk), // IN
      .TRIG0(
         {
	  triggerA0,
	  triggerB0,
	  r0_rx_tlast,
	  r0_rx_tvalid,
	  r0_rx_tready,
	  r1_rx_tlast,
	  r1_rx_tvalid,
	  r1_rx_tready,
	  rx_tlast,
	  rx_tvalid,
	  rx_tready,
	  r0_rx_tdata[15:0],
	  r1_rx_tdata[15:0],
	  rx_tdata[15:0]
          }
         ) // IN BUS [191:0]
      );

   chipscope_icon chipscope_icon_i0
     (
      .CONTROL0(CONTROL0) // INOUT BUS [35:0]
      );
 -----/\----- EXCLUDED -----/\----- */
   

endmodule // b200_core