1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
|
//
// Copyright 2011-2013 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
module simple_uart_rx
#(parameter SIZE=0)
(input clk, input rst,
output [7:0] fifo_out, input fifo_read, output [5:0] fifo_level, output fifo_empty,
input [15:0] clkdiv, input rx);
reg rx_d1, rx_d2;
always @(posedge clk)
if(rst)
{rx_d2,rx_d1} <= 0;
else
{rx_d2,rx_d1} <= {rx_d1,rx};
reg [15:0] baud_ctr;
reg [3:0] bit_ctr;
reg [7:0] sr;
wire neg_trans = rx_d2 & ~rx_d1;
wire shift_now = baud_ctr == (clkdiv>>1);
wire stop_now = (bit_ctr == 10) && shift_now;
wire go_now = (bit_ctr == 0) && neg_trans;
always @(posedge clk)
if(rst)
sr <= 0;
else if(shift_now)
sr <= {rx_d2,sr[7:1]};
always @(posedge clk)
if(rst)
baud_ctr <= 0;
else
if(go_now)
baud_ctr <= 1;
else if(stop_now)
baud_ctr <= 0;
else if(baud_ctr >= clkdiv)
baud_ctr <= 1;
else if(baud_ctr != 0)
baud_ctr <= baud_ctr + 1;
always @(posedge clk)
if(rst)
bit_ctr <= 0;
else
if(go_now)
bit_ctr <= 1;
else if(stop_now)
bit_ctr <= 0;
else if(baud_ctr == clkdiv)
bit_ctr <= bit_ctr + 1;
wire i_tready, o_tvalid;
wire full = ~i_tready;
wire write = ~full & rx_d2 & stop_now;
assign fifo_empty = ~o_tvalid;
axi_fifo #(.WIDTH(8), .SIZE(SIZE)) fifo
(.clk(clk),.reset(rst), .clear(1'b0),
.i_tdata(sr),.i_tvalid(write),.i_tready(i_tready),
.o_tdata(fifo_out),.o_tvalid(o_tvalid),.o_tready(fifo_read),
.space(),.occupied(fifo_level) );
endmodule // simple_uart_rx
|
