1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
|
//
// Copyright 2012-2013 Ettus Research LLC
//
module gpif2_to_fifo64
#(
parameter FIFO_SIZE = 9
)
(
//input interface
input gpif_clk, input gpif_rst,
input [31:0] i_tdata,
input i_tlast,
input i_tvalid,
output i_tready,
output fifo_has_space,
output fifo_nearly_full,
//output fifo interface
input fifo_clk, input fifo_rst,
output [63:0] o_tdata,
output o_tlast,
output o_tvalid,
input o_tready,
output bus_error,
output [159:0] debug
);
wire [31:0] int_tdata;
wire int_tlast;
wire int_tvalid, int_tready;
wire [31:0] int0_tdata; wire int0_tlast, int0_tvalid, int0_tready;
//this fifo provides a space signal so we know a burst is possible
localparam BURST_SIZE = (FIFO_SIZE < 8)? FIFO_SIZE : 8;
wire [15:0] space;
assign fifo_has_space = space >= (1 << BURST_SIZE);
assign fifo_nearly_full = (space < 6); // 5 spaces left.
axi_fifo #(.WIDTH(33), .SIZE(0)) ingress_timing_fifo
(
.clk(gpif_clk), .reset(gpif_rst), .clear(1'b0),
.i_tdata({i_tlast, i_tdata}), .i_tvalid(i_tvalid), .i_tready(i_tready), .space(),
.o_tdata({int0_tlast, int0_tdata}), .o_tvalid(int0_tvalid), .o_tready(int0_tready), .occupied()
);
axi_fifo #(.WIDTH(33), .SIZE(BURST_SIZE)) min_read_buff
(
.clk(gpif_clk), .reset(gpif_rst), .clear(1'b0),
.i_tdata({int0_tlast, int0_tdata}), .i_tvalid(int0_tvalid), .i_tready(int0_tready), .space(space),
.o_tdata({int_tlast, int_tdata}), .o_tvalid(int_tvalid), .o_tready(int_tready), .occupied()
);
reg input_write_error;
always @(posedge gpif_clk) input_write_error <= i_tvalid & ~i_tready;
wire [31:0] chk_tdata;
wire chk_tlast;
wire chk_tvalid, chk_tready;
axi_fifo_2clk #(.WIDTH(33), .SIZE(0/*SRL*/)) cross_clock_fifo
(
.reset(fifo_rst | gpif_rst),
.i_aclk(gpif_clk), .i_tdata({int_tlast, int_tdata}), .i_tvalid(int_tvalid), .i_tready(int_tready),
.o_aclk(fifo_clk), .o_tdata({chk_tlast, chk_tdata}), .o_tvalid(chk_tvalid), .o_tready(chk_tready)
);
wire [31:0] o32_tdata;
wire o32_tlast;
wire o32_tvalid, o32_tready;
//reframes a tlast from the vita header - and drops bad packets
//*
gpif2_error_checker #(.SIZE(FIFO_SIZE)) checker
(
.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0),
.i_tdata(chk_tdata), .i_tlast(chk_tlast), .i_tvalid(chk_tvalid), .i_tready(chk_tready),
.o_tdata(o32_tdata), .o_tlast(o32_tlast), .o_tvalid(o32_tvalid), .o_tready(o32_tready),
.bus_error(bus_error), .debug(debug[63:0])
);
//*/
//assign o32_tdata = chk_tdata;
//assign o32_tlast = chk_tlast;
//assign o32_tvalid = chk_tvalid;
//assign chk_tready = o32_tready;
axi_fifo32_to_fifo64 fifo32_to_fifo64
(
.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0),
.i_tdata(o32_tdata), .i_tuser(2'b0/*always 32 bits*/), .i_tlast(o32_tlast), .i_tvalid(o32_tvalid), .i_tready(o32_tready),
.o_tdata(o_tdata), .o_tuser(/*ignored cuz vita has len*/), .o_tlast(o_tlast), .o_tvalid(o_tvalid), .o_tready(o_tready)
);
assign debug[159:64] = {
fifo_nearly_full, // 146
space[9:0], // 145:136
input_write_error, // 135
int_tlast, // 134
int_tready, // 133
int_tvalid, // 132
i_tlast, // 131
i_tready, // 130
fifo_has_space, // 129
i_tvalid, // 128
int_tdata[31:0], // 127:96
i_tdata[31:0] // 95:64
};
endmodule //fifo_to_gpif2
|
