1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
|
module vita_rx_control
#(parameter BASE=0,
parameter WIDTH=32)
(input clk, input reset, input clear,
input set_stb, input [7:0] set_addr, input [31:0] set_data,
input [63:0] vita_time,
output overrun,
// To vita_rx_framer
output [4+64+WIDTH-1:0] sample_fifo_o,
output sample_fifo_src_rdy_o,
input sample_fifo_dst_rdy_i,
// From DSP Core
input [WIDTH-1:0] sample,
output run,
input strobe,
output [31:0] debug_rx
);
// FIXME add TX Interruption (halt, pause, continue) functionality
wire [63:0] new_time;
wire [31:0] new_command;
wire sc_pre1, clear_int, clear_reg;
assign clear_int = clear | clear_reg;
wire [63:0] rcvtime_pre;
reg [63:0] rcvtime;
wire [29:0] numlines_pre;
wire send_imm_pre, chain_pre;
reg send_imm, chain;
wire full_ctrl, read_ctrl, empty_ctrl, write_ctrl;
reg sc_pre2;
wire [33:0] fifo_line;
reg [29:0] lines_left;
reg [2:0] ibs_state;
wire now, early, late;
wire sample_fifo_in_rdy;
setting_reg #(.my_addr(BASE)) sr_cmd
(.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr),
.in(set_data),.out(new_command),.changed());
setting_reg #(.my_addr(BASE+1)) sr_time_h
(.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr),
.in(set_data),.out(new_time[63:32]),.changed());
setting_reg #(.my_addr(BASE+2)) sr_time_l
(.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr),
.in(set_data),.out(new_time[31:0]),.changed(sc_pre1));
setting_reg #(.my_addr(BASE+3)) sr_clear
(.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr),
.in(set_data),.out(),.changed(clear_reg));
// FIFO to store commands sent from the settings bus
always @(posedge clk)
sc_pre2 <= sc_pre1;
assign write_ctrl = sc_pre1 & ~sc_pre2;
wire [4:0] command_queue_len;
shortfifo #(.WIDTH(96)) commandfifo
(.clk(clk),.rst(reset),.clear(clear_int),
.datain({new_command,new_time}), .write(write_ctrl&~full_ctrl), .full(full_ctrl),
.dataout({send_imm_pre,chain_pre,numlines_pre,rcvtime_pre}),
.read(read_ctrl), .empty(empty_ctrl),
.occupied(command_queue_len), .space() );
reg [33:0] pkt_fifo_line;
localparam IBS_IDLE = 0;
localparam IBS_WAITING = 1;
localparam IBS_RUNNING = 2;
localparam IBS_OVERRUN = 4;
localparam IBS_BROKENCHAIN = 5;
localparam IBS_LATECMD = 6;
wire signal_cmd_done = (lines_left == 1) & (~chain | (~empty_ctrl & (numlines_pre==0)));
wire signal_overrun = (ibs_state == IBS_OVERRUN);
wire signal_brokenchain = (ibs_state == IBS_BROKENCHAIN);
wire signal_latecmd = (ibs_state == IBS_LATECMD);
// Buffer of samples for while we're writing the packet headers
wire [3:0] flags = {signal_overrun,signal_brokenchain,signal_latecmd,signal_cmd_done};
wire attempt_sample_write = ((run & strobe) | (ibs_state==IBS_OVERRUN) |
(ibs_state==IBS_BROKENCHAIN) | (ibs_state==IBS_LATECMD));
fifo_short #(.WIDTH(4+64+WIDTH)) rx_sample_fifo
(.clk(clk),.reset(reset),.clear(clear_int),
.datain({flags,vita_time,sample}), .src_rdy_i(attempt_sample_write), .dst_rdy_o(sample_fifo_in_rdy),
.dataout(sample_fifo_o),
.src_rdy_o(sample_fifo_src_rdy_o), .dst_rdy_i(sample_fifo_dst_rdy_i),
.space(), .occupied() );
// Inband Signalling State Machine
time_compare
time_compare (.time_now(vita_time), .trigger_time(rcvtime), .now(now), .early(early), .late(late));
wire too_late = late & ~send_imm;
wire go_now = now | send_imm;
wire full = ~sample_fifo_in_rdy;
always @(posedge clk)
if(reset | clear_int)
begin
ibs_state <= IBS_IDLE;
lines_left <= 0;
rcvtime <= 0;
send_imm <= 0;
chain <= 0;
end
else
case(ibs_state)
IBS_IDLE :
if(~empty_ctrl)
begin
lines_left <= numlines_pre;
rcvtime <= rcvtime_pre;
ibs_state <= IBS_WAITING;
send_imm <= send_imm_pre;
chain <= chain_pre;
end
IBS_WAITING :
if(go_now)
ibs_state <= IBS_RUNNING;
else if(too_late)
ibs_state <= IBS_LATECMD;
IBS_RUNNING :
if(strobe)
if(full)
ibs_state <= IBS_OVERRUN;
else
begin
lines_left <= lines_left - 1;
if(lines_left == 1)
if(~chain)
ibs_state <= IBS_IDLE;
else if(empty_ctrl)
ibs_state <= IBS_BROKENCHAIN;
else
begin
lines_left <= numlines_pre;
rcvtime <= rcvtime_pre;
send_imm <= send_imm_pre;
chain <= chain_pre;
if(numlines_pre == 0) // If we are told to stop here
ibs_state <= IBS_IDLE;
else
ibs_state <= IBS_RUNNING;
end
end // else: !if(full)
IBS_OVERRUN :
if(sample_fifo_in_rdy)
ibs_state <= IBS_IDLE;
IBS_LATECMD :
if(sample_fifo_in_rdy)
ibs_state <= IBS_IDLE;
IBS_BROKENCHAIN :
if(sample_fifo_in_rdy)
ibs_state <= IBS_IDLE;
endcase // case(ibs_state)
assign overrun = (ibs_state == IBS_OVERRUN);
assign run = (ibs_state == IBS_RUNNING);
assign read_ctrl = ( (ibs_state == IBS_IDLE) | ((ibs_state == IBS_RUNNING) & strobe & ~full & (lines_left==1) & chain) )
& ~empty_ctrl;
assign debug_rx = { { ibs_state[2:0], command_queue_len },
{ 8'd0 },
{ go_now, too_late, run, strobe, read_ctrl, write_ctrl, full_ctrl, empty_ctrl },
{ 2'b0, overrun, chain_pre, sample_fifo_in_rdy, attempt_sample_write, sample_fifo_src_rdy_o,sample_fifo_dst_rdy_i} };
endmodule // rx_control
|
