1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
|
//
// Copyright 2011 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
// NOTE: Will not work with single-line frames
module ethrx_realign
(input clk, input reset, input clear,
input [35:0] datain, input src_rdy_i, output dst_rdy_o,
output [35:0] dataout, output src_rdy_o, input dst_rdy_i);
reg [1:0] state;
reg [15:0] held;
reg [1:0] held_occ;
wire xfer_in = src_rdy_i & dst_rdy_o;
wire xfer_out = src_rdy_o & dst_rdy_i;
wire sof_in = datain[32];
wire eof_in = datain[33];
wire [1:0] occ_in = datain[35:34];
wire sof_out, eof_out;
wire [1:0] occ_out;
always @(posedge clk)
if(reset | clear)
begin
held <= 0;
held_occ <= 0;
end
else if(xfer_in)
begin
held <= datain[15:0];
held_occ <= datain[35:34];
end
localparam RE_IDLE = 0;
localparam RE_HELD = 1;
localparam RE_DONE = 2;
always @(posedge clk)
if(reset | clear)
state <= RE_IDLE;
else
case(state)
RE_IDLE :
if(src_rdy_i & dst_rdy_i)
if(eof_in)
state <= RE_DONE;
else
state <= RE_HELD;
RE_HELD :
if(src_rdy_i & dst_rdy_i & eof_in)
if((occ_in==0)|(occ_in==3))
state <= RE_DONE;
else
state <= RE_IDLE;
RE_DONE :
if(dst_rdy_i)
state <= RE_IDLE;
endcase // case (state)
assign sof_out = (state == RE_IDLE);
assign eof_out = (state == RE_DONE) | (occ_in == 1) | (occ_in == 2);
assign occ_out = (state == RE_DONE) ? ((held_occ == 3) ? 1 : 2) :
(occ_in == 1) ? 3 : 0;
assign dataout = {occ_out,eof_out,sof_out,held,datain[31:16]};
assign src_rdy_o = (state == RE_DONE) | src_rdy_i;
assign dst_rdy_o = dst_rdy_i & ((state == RE_IDLE)|(state == RE_HELD));
endmodule // ethrx_realign
|
