1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
|
//
// Copyright 2011 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
// SERDES Interface
// LS-Byte is sent first, MS-Byte is second
// Invalid K Codes
// K0.0 000-00000 Error detected
// K31.7 111-11111 Loss of input signal
// Valid K Codes
// K28.0 000-11100
// K28.1 001-11100 Alternate COMMA?
// K28.2 010-11100
// K28.3 011-11100
// K28.4 100-11100
// K28.5 101-11100 Standard COMMA?
// K28.6 110-11100
// K28.7 111-11100 Bad COMMA?
// K23.7 111-10111
// K27.7 111-11011
// K29.7 111-11101
// K30.7 111-11110
module serdes_tx
#(parameter FIFOSIZE = 9)
(input clk,
input rst,
// TX HW Interface
output ser_tx_clk,
output reg [15:0] ser_t,
output reg ser_tklsb,
output reg ser_tkmsb,
// TX Stream Interface
input [31:0] rd_dat_i,
input [3:0] rd_flags_i,
output rd_ready_o,
input rd_ready_i,
// Flow control interface
input inhibit_tx,
input send_xon,
input send_xoff,
output sent,
// FIFO Levels
output [15:0] fifo_occupied,
output fifo_full,
output fifo_empty,
// DEBUG
output [31:0] debug
);
localparam K_COMMA = 8'b101_11100; // 0xBC K28.5
localparam K_IDLE = 8'b001_11100; // 0x3C K28.1
localparam K_PKT_START = 8'b110_11100; // 0xDC K28.6
localparam K_PKT_END = 8'b100_11100; // 0x9C K28.4
localparam K_XON = 8'b010_11100; // 0x5C K28.2
localparam K_XOFF = 8'b011_11100; // 0x7C K28.3
localparam K_LOS = 8'b111_11111; // 0xFF K31.7
localparam K_ERROR = 8'b000_00000; // 0x00 K00.0
localparam D_56 = 8'b110_00101; // 0xC5 D05.6
assign ser_tx_clk = clk;
localparam IDLE = 3'd0;
localparam RUN1 = 3'd1;
localparam RUN2 = 3'd2;
localparam DONE = 3'd3;
localparam SENDCRC = 3'd4;
localparam WAIT = 3'd5;
reg [2:0] state;
reg [15:0] CRC;
wire [15:0] nextCRC;
reg [3:0] wait_count;
// Internal FIFO, size 9 is 2K, size 10 is 4K bytes
wire sop_o, eop_o;
wire [31:0] data_o;
wire rd_sop_i = rd_flags_i[0];
wire rd_eop_i = rd_flags_i[1];
wire [1:0] rd_occ_i = rd_flags_i[3:2]; // Unused
wire have_data, empty, read;
fifo_cascade #(.WIDTH(34),.SIZE(FIFOSIZE)) serdes_tx_fifo
(.clk(clk),.reset(rst),.clear(0),
.datain({rd_sop_i,rd_eop_i,rd_dat_i}), .src_rdy_i(rd_ready_i), .dst_rdy_o(rd_ready_o),
.dataout({sop_o,eop_o,data_o}), .dst_rdy_i(read), .src_rdy_o(have_data),
.space(), .occupied(fifo_occupied) );
assign fifo_full = ~rd_ready_o;
assign empty = ~have_data;
assign fifo_empty = empty;
// FIXME Implement flow control
reg [15:0] second_word;
reg [33:0] pipeline;
assign read = (~send_xon & ~send_xoff & (state==RUN2)) | ((state==IDLE) & ~empty & ~sop_o);
assign sent = send_xon | send_xoff;
// 2nd half of above probably not necessary. Just in case we get junk between packets
always @(posedge clk)
if(rst)
begin
state <= IDLE;
wait_count <= 0;
{ser_tkmsb,ser_tklsb,ser_t} <= 18'd0;
//{2'b10,K_COMMA,K_COMMA};
// make tkmsb and tklsb different so they can go in IOFFs
end
else
if(send_xon)
{ser_tkmsb,ser_tklsb,ser_t} <= {2'b11,K_XON,K_XON};
else if(send_xoff)
{ser_tkmsb,ser_tklsb,ser_t} <= {2'b11,K_XOFF,K_XOFF};
else
case(state)
IDLE :
begin
if(sop_o & ~empty & ~inhibit_tx)
begin
{ser_tkmsb,ser_tklsb,ser_t} <= {2'b11,K_PKT_START,K_PKT_START};
state <= RUN1;
end
else
{ser_tkmsb,ser_tklsb,ser_t} <= {2'b10,K_COMMA,D_56};
end
RUN1 :
begin
if(empty | inhibit_tx)
{ser_tkmsb,ser_tklsb,ser_t} <= {2'b10,K_COMMA,D_56};
else
begin
{ser_tkmsb,ser_tklsb,ser_t} <= {2'b00,data_o[15:0]};
state <= RUN2;
end
end
RUN2 :
begin
{ser_tkmsb,ser_tklsb,ser_t} <= {2'b00,data_o[31:16]};
if(eop_o)
state <= DONE;
else
state <= RUN1;
end
DONE :
begin
{ser_tkmsb,ser_tklsb,ser_t} <= {2'b11,K_PKT_END,K_PKT_END};
state <= SENDCRC;
end
SENDCRC :
begin
{ser_tkmsb,ser_tklsb,ser_t} <= {2'b00,CRC};
state <= WAIT;
wait_count <= 4'd15;
end
WAIT :
begin
{ser_tkmsb,ser_tklsb,ser_t} <= {2'b10,K_COMMA,D_56};
if(wait_count == 0)
state <= IDLE;
else
wait_count <= wait_count - 1;
end
default
state <= IDLE;
endcase // case(state)
always @(posedge clk)
if(rst)
CRC <= 16'hFFFF;
else if(state == IDLE)
CRC <= 16'hFFFF;
else if( (~empty & ~inhibit_tx & (state==RUN1)) || (state==RUN2) )
CRC <= nextCRC;
CRC16_D16 crc_blk( (state==RUN1) ? data_o[15:0] : data_o[31:16], CRC, nextCRC);
assign debug = { 28'd0, state[2:0] };
endmodule // serdes_tx
|
