1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
|
//
// Copyright 2011 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
module simple_uart_tx
#(parameter DEPTH=0)
(input clk, input rst,
input [7:0] fifo_in, input fifo_write, output [7:0] fifo_level, output fifo_full,
input [15:0] clkdiv, output baudclk, output reg tx);
reg [15:0] baud_ctr;
reg [3:0] bit_ctr;
wire read, empty;
wire [7:0] char_to_send;
medfifo #(.WIDTH(8),.DEPTH(DEPTH)) fifo
(.clk(clk),.rst(rst),
.datain(fifo_in),.write(fifo_write),.full(fifo_full),
.dataout(char_to_send),.read(read),.empty(empty),
.clear(0),.space(fifo_level),.occupied() );
always @(posedge clk)
if(rst)
baud_ctr <= 0;
else if (baud_ctr >= clkdiv)
baud_ctr <= 0;
else
baud_ctr <= baud_ctr + 1;
always @(posedge clk)
if(rst)
bit_ctr <= 0;
else if(baud_ctr == clkdiv)
if(bit_ctr == 9)
bit_ctr <= 0;
else if(bit_ctr != 0)
bit_ctr <= bit_ctr + 1;
else if(~empty)
bit_ctr <= 1;
always @(posedge clk)
if(rst)
tx <= 1;
else
case(bit_ctr)
0 : tx <= 1;
1 : tx <= 0;
2 : tx <= char_to_send[0];
3 : tx <= char_to_send[1];
4 : tx <= char_to_send[2];
5 : tx <= char_to_send[3];
6 : tx <= char_to_send[4];
7 : tx <= char_to_send[5];
8 : tx <= char_to_send[6];
9 : tx <= char_to_send[7];
default : tx <= 1;
endcase // case(bit_ctr)
assign read = (bit_ctr == 9) && (baud_ctr == clkdiv);
assign baudclk = (baud_ctr == 1); // Only for debug purposes
endmodule // simple_uart_tx
|
