1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
|
//
// Copyright 2011 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
// Grab settings off the wishbone bus, send them out to our simpler bus on the fast clock
module settings_bus
#(parameter AWIDTH=16, parameter DWIDTH=32)
(input wb_clk,
input wb_rst,
input [AWIDTH-1:0] wb_adr_i,
input [DWIDTH-1:0] wb_dat_i,
input wb_stb_i,
input wb_we_i,
output reg wb_ack_o,
output reg strobe,
output reg [7:0] addr,
output reg [31:0] data);
reg stb_int, stb_int_d1;
always @(posedge wb_clk)
if(wb_rst)
begin
strobe <= 1'b0;
addr <= 8'd0;
data <= 32'd0;
end
else if(wb_we_i & wb_stb_i & ~wb_ack_o)
begin
strobe <= 1'b1;
addr <= wb_adr_i[9:2];
data <= wb_dat_i;
end
else
strobe <= 1'b0;
always @(posedge wb_clk)
if(wb_rst)
wb_ack_o <= 0;
else
wb_ack_o <= wb_stb_i & ~wb_ack_o;
endmodule // settings_bus
|
