summaryrefslogtreecommitdiffstats
path: root/fpga/usrp1/inband_lib/cmd_reader.v
blob: b69ea02b7b9e103b52050ea8091bd4f761bfd74a (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
module cmd_reader
   (//System
    input reset, input txclk, input [31:0] timestamp_clock,
    //FX2 Side
    output reg skip, output reg rdreq, 
    input [31:0] fifodata, input pkt_waiting,
    //Rx side
    input rx_WR_enabled, output reg [15:0] rx_databus,
    output reg rx_WR, output reg rx_WR_done,
    //register io
    input wire [31:0] reg_data_out, output reg [31:0] reg_data_in,
    output reg [6:0] reg_addr, output reg [1:0] reg_io_enable,
    output wire [14:0] debug, output reg stop, output reg [15:0] stop_time);
	
   // States
   parameter IDLE                       =   4'd0;
   parameter HEADER                     =   4'd1;
   parameter TIMESTAMP                  =   4'd2;
   parameter WAIT          	        =   4'd3;
   parameter TEST                       =   4'd4;
   parameter SEND                       =   4'd5;
   parameter PING                       =   4'd6;
   parameter WRITE_REG                  =   4'd7;
   parameter WRITE_REG_MASKED           =   4'd8;
   parameter READ_REG                   =   4'd9;
   parameter DELAY                      =   4'd14;		

   `define OP_PING_FIXED                    8'd0
   `define OP_PING_FIXED_REPLY              8'd1
   `define OP_WRITE_REG	                    8'd2
   `define OP_WRITE_REG_MASKED              8'd3
   `define OP_READ_REG                      8'd4
   `define OP_READ_REG_REPLY                8'd5
   `define OP_DELAY                         8'd12
	
   reg [6:0]   payload;
   reg [6:0]   payload_read;
   reg [3:0]   state;
   reg [15:0]  high;
   reg [15:0]  low;
   reg         pending;
   reg [31:0]  value0;
   reg [31:0]  value1;
   reg [31:0]  value2;
   reg [1:0]   lines_in;
   reg [1:0]   lines_out;
   reg [1:0]   lines_out_total;
	
   `define JITTER                           5
   `define OP_CODE                          31:24
   `define PAYLOAD                          8:2
	
   wire [7:0] ops;
   assign ops = value0[`OP_CODE];
   assign debug = {state[3:0], lines_out[1:0], pending, rx_WR, rx_WR_enabled, value0[2:0], ops[2:0]};
	
   always @(posedge txclk)
       if (reset)
         begin
           pending <= 0;
           state <= IDLE;
           skip <= 0;
           rdreq <= 0;
           rx_WR <= 0;
           reg_io_enable <= 0;
           reg_data_in <= 0;
           reg_addr <= 0;
           stop <= 0;
          end
        else case (state)
          IDLE : 
            begin
              payload_read <= 0;
              skip <= 0;
              lines_in <= 0;
              if(pkt_waiting)
                begin
                  state <= HEADER;
                  rdreq <= 1;
                end
             end
          
          HEADER : 
            begin
              payload <= fifodata[`PAYLOAD];
              state <= TIMESTAMP;
            end
          
          TIMESTAMP : 
            begin
              value0 <= fifodata;
              state <= WAIT;
              rdreq <= 0;
            end
			
          WAIT : 
            begin
              // Let's send it
              if ((value0 <= timestamp_clock + `JITTER 
                 && value0 > timestamp_clock)
                 || value0 == 32'hFFFFFFFF)
                  state <= TEST;
              // Wait a little bit more
              else if (value0 > timestamp_clock + `JITTER)
                  state <= WAIT; 
              // Outdated
              else if (value0 < timestamp_clock)
                begin
                  state <= IDLE;
                  skip <= 1;
                end
            end
			
          TEST : 
            begin
              reg_io_enable <= 0;
              rx_WR <= 0;
              rx_WR_done <= 1;
              stop <= 0;
              if (payload_read == payload)
                begin
                  skip <= 1;
                  state <= IDLE;
                  rdreq <= 0;
                end
              else
                begin
                  value0 <= fifodata;
                  lines_in <= 2'd1;
                  rdreq <= 1;
                  payload_read <= payload_read + 7'd1;
                  lines_out <= 0;
                  case (fifodata[`OP_CODE])
                    `OP_PING_FIXED: 
                      begin
                        state <= PING;
                      end
                    `OP_WRITE_REG: 
                      begin
                        state <= WRITE_REG;
                        pending <= 1;
                      end
                    `OP_WRITE_REG_MASKED: 
                      begin
                        state <= WRITE_REG_MASKED;
                        pending <= 1;
                      end
                    `OP_READ_REG: 
                      begin
                        state <= READ_REG;
                      end
                    `OP_DELAY: 
                      begin
                        state <= DELAY;
                      end
                    default: 
                      begin
                      //error, skip this packet
                        skip <= 1;
                        state <= IDLE;
                      end
                  endcase
                end
              end
			
            SEND: 
              begin
                rdreq <= 0;
                rx_WR_done <= 0;
                if (pending)
                  begin
                    rx_WR <= 1;
                    rx_databus <= high;
                    pending <= 0;
                    if (lines_out == lines_out_total)
                        state <= TEST;
                    else case (ops)
                        `OP_READ_REG: 
                          begin
                            state <= READ_REG;
                          end
                         default: 
                           begin
                             state <= TEST;
                           end
                    endcase
                  end
                else
                  begin
                    if (rx_WR_enabled)
                      begin
                        rx_WR <= 1;
                        rx_databus <= low;
                        pending <= 1;
                        lines_out <= lines_out + 2'd1;
                      end
                    else
                        rx_WR <= 0;
                  end
                end
			
            PING: 
              begin
                rx_WR <= 0;
                rdreq <= 0;
                rx_WR_done <= 0;
                lines_out_total <= 2'd1;
                pending <= 0; 
                state <= SEND;
                high <= {`OP_PING_FIXED_REPLY, 8'd2};
                low <= value0[15:0];	
              end
			
            READ_REG: 
              begin
                rx_WR <= 0;
                rx_WR_done <= 0;
                rdreq <= 0;
                lines_out_total <= 2'd2;
                pending <= 0;
                state <= SEND;
                if (lines_out == 0)
                  begin
                    high <= {`OP_READ_REG_REPLY, 8'd6};
                    low <= value0[15:0];
                    reg_io_enable <= 2'd3;
                    reg_addr <= value0[6:0];
                  end
                else
                  begin		
                    high <= reg_data_out[31:16];
                    low <= reg_data_out[15:0];
                  end
             end    
			
            WRITE_REG: 
              begin
                rx_WR <= 0;
                if (pending)
                    pending <= 0;
                else
                  begin
                    if (lines_in == 2'd1)
                      begin
                        payload_read <= payload_read + 7'd1;
                        lines_in <= lines_in + 2'd1;
                        value1 <= fifodata;
                        rdreq <= 0;
                      end
                    else
                      begin
                        reg_io_enable <= 2'd2;
                        reg_data_in <= value1;
                        reg_addr <= value0[6:0];
                        state <= TEST;
                      end
                  end
              end
			
            WRITE_REG_MASKED: 
              begin
                rx_WR <= 0;
                if (pending)
                    pending <= 0;
                else
                  begin
                    if (lines_in == 2'd1)
                      begin
                        rdreq <= 1;
                        payload_read <= payload_read + 7'd1;
                        lines_in <= lines_in + 2'd1;
                        value1 <= fifodata;
                      end
                    else if (lines_in == 2'd2)
                      begin
                        rdreq <= 0;
                        payload_read <= payload_read + 7'd1;
                        lines_in <= lines_in + 2'd1;
                        value2 <= fifodata;
                      end
                    else
                      begin
                        reg_io_enable <= 2'd2;
                        reg_data_in <= (value1 & value2);
                        reg_addr <= value0[6:0];
                        state <= TEST;
                      end
                  end
              end
			
            DELAY : 
              begin
                rdreq <= 0;
                stop <= 1;
                stop_time <= value0[15:0];
                state <= TEST;
              end
			
            default : 
              begin
                //error state handling
                state <= IDLE;
              end
        endcase
endmodule