1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
|
/* -*- c++ -*- */
/*
* Copyright 2010 Ettus Research LLC
*
*/
#include <memory_map.h>
#include <nonstdio.h>
#include <hal_io.h>
#include <xilinx_s3_icap.h>
#include <spi_flash.h>
#include <spi_flash_private.h>
//#include <clocks.h>
#include <ihex.h>
#include <bootloader_utils.h>
#include <string.h>
#include <hal_uart.h>
void pic_interrupt_handler() __attribute__ ((interrupt_handler));
void pic_interrupt_handler()
{
// nop stub
}
void load_ihex(void) { //simple IHEX parser to load proper records into RAM. loads program when it receives end of record.
char buf[128]; //input data buffer
uint8_t ihx[32]; //ihex data buffer
ihex_record_t ihex_record;
ihex_record.data = ihx;
while(1) {
gets(buf);
if(!ihex_parse(buf, &ihex_record)) { //RAM data record is valid
if(ihex_record.addr >= RAM_BASE) { //it's expecting to see FULLY RELOCATED IHX RECORDS. every address referenced to 0x8000, including vectors.
memcpy((void *) (ihex_record.addr), ihex_record.data, ihex_record.length);
puts("OK");
} else if(ihex_record.type == 1) { //end of record
puts("OK");
//load main firmware
start_program(RAM_BASE);
puts("ERROR: main image returned! Back in IHEX load mode.");
} else puts("NOK"); //RAM loads do not support extended segment address records (04) -- upper 16 bits are always "0".
} else puts("NOK");
}
}
void delay(uint32_t t) {
while(t-- != 0) asm("NOP");
}
//let's clean up this logic. state machine? no, you only have to go through it once.
//don't need else cases since all these are terminal cases
int main(int argc, char *argv[]) {
hal_disable_ints(); // In case we got here via jmp 0x0
output_regs->leds = 0xFF;
delay(500000);
output_regs->leds = 0x00;
hal_uart_init();
spif_init();
// i2c_init(); //for EEPROM
puts("USRP2+ bootloader\n");
if(BUTTON_PUSHED) { //see memory_map.h
puts("Starting USRP2+ in safe mode.");
if(is_valid_fw_image(SAFE_FW_IMAGE_LOCATION_ADDR)) {
spi_flash_read(SAFE_FW_IMAGE_LOCATION_ADDR, FW_IMAGE_SIZE_BYTES, (void *)RAM_BASE);
start_program(RAM_BASE);
puts("ERROR: return from main program! This should never happen!");
//icap_reload_fpga(SAFE_FPGA_IMAGE_LOCATION_ADDR);
} else {
puts("ERROR: no safe firmware image available. I am a brick. Feel free to load IHEX to RAM.");
load_ihex();
}
}
puts("Checking for valid production FPGA image...");
if(is_valid_fpga_image(PROD_FPGA_IMAGE_LOCATION_ADDR)) {
puts("Valid production FPGA image found. Attempting to boot.");
//icap_reload_fpga(PROD_FPGA_IMAGE_LOCATION_ADDR);
}
puts("No valid production FPGA image found.\nAttempting to load production firmware...");
if(is_valid_fw_image(PROD_FW_IMAGE_LOCATION_ADDR)) {
puts("Valid production firmware found. Loading...");
spi_flash_read(PROD_FW_IMAGE_LOCATION_ADDR, FW_IMAGE_SIZE_BYTES, (void *)RAM_BASE);
start_program(RAM_BASE);
puts("ERROR: Return from main program! This should never happen!");
//if this happens, though, the safest thing to do is reboot the whole FPGA and start over.
//icap_reload_fpga(SAFE_FPGA_IMAGE_LOCATION_ADDR);
return 1;
}
puts("No valid production firmware found. Trying safe firmware...");
if(is_valid_fw_image(SAFE_FW_IMAGE_LOCATION_ADDR)) {
spi_flash_read(SAFE_FW_IMAGE_LOCATION_ADDR, FW_IMAGE_SIZE_BYTES, (void *)RAM_BASE);
start_program(RAM_BASE);
puts("ERROR: return from main program! This should never happen!");
//icap_reload_fpga(SAFE_FPGA_IMAGE_LOCATION_ADDR);
return 1; //_exit will trap in loop
}
puts("ERROR: no safe firmware image available. I am a brick. Feel free to load IHEX to RAM.");
load_ihex();
return 0;
}
|
