1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
|
/*
* Copyright 2007 Free Software Foundation, Inc.
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "u2_init.h"
#include "memory_map.h"
#include "spi.h"
#include "pic.h"
#include "hal_io.h"
#include "buffer_pool.h"
#include "hal_uart.h"
#include "i2c.h"
#include "mdelay.h"
#include "clocks.h"
#include "usrp2_i2c_addr.h"
//#include "nonstdio.h"
unsigned char u2_hw_rev_major;
unsigned char u2_hw_rev_minor;
static inline void
get_hw_rev(void)
{
bool ok = eeprom_read(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &u2_hw_rev_minor, 1);
ok &= eeprom_read(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &u2_hw_rev_major, 1);
}
/*
* We ought to arrange for this to be called before main, but for now,
* we require that the user's main call u2_init as the first thing...
*/
bool
u2_init(void)
{
// Set GPIOs to inputs, disable GPIO streaming
hal_gpio_set_ddr(GPIO_TX_BANK, 0x0000, 0xffff);
hal_gpio_set_ddr(GPIO_RX_BANK, 0x0000, 0xffff);
hal_gpio_write(GPIO_TX_BANK, 0x0000, 0xffff); // init s/w output value to zero
hal_gpio_write(GPIO_RX_BANK, 0x0000, 0xffff);
dsp_rx_regs->gpio_stream_enable = 0; // I, Q LSBs come from DSP
hal_io_init();
// init spi, so that we can switch over to the high-speed clock
spi_init();
// init i2c so we can read our rev
i2c_init();
get_hw_rev();
// set up the default clocks
clocks_init();
// clocks_enable_test_clk(true,1);
// Enable ADCs
output_regs->adc_ctrl = ADC_CTRL_ON;
// Initial values for tx and rx mux registers
dsp_tx_regs->tx_mux = 0x10;
dsp_rx_regs->rx_mux = 0x44444444;
// Set up serdes
output_regs->serdes_ctrl = (SERDES_ENABLE | SERDES_RXEN);
pic_init(); // progammable interrupt controller
bp_init(); // buffer pool
hal_enable_ints();
// flash all leds to let us know board is alive
hal_set_leds(0x0, 0x1f);
mdelay(100);
hal_set_leds(0x1f, 0x1f);
mdelay(100);
hal_set_leds(0x1, 0x1f); // Leave the first one on
#if 0
// test register readback
int rr, vv;
vv = ad9777_read_reg(0);
printf("ad9777 reg[0] = 0x%x\n", vv);
for (rr = 0x04; rr <= 0x0d; rr++){
vv = ad9510_read_reg(rr);
printf("ad9510 reg[0x%x] = 0x%x\n", rr, vv);
}
#endif
return true;
}
|
