blob: 3d65337f5c033c8f0fbbbc9737b35ee12d2a7140 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
|
/*
* USRP - Universal Software Radio Peripheral
*
* Copyright (C) 2003 Free Software Foundation, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
*/
/*
* These are the register definitions for the Rev 1 USRP prototype
* The Rev 1 is the version with the AD9862's and daughterboards
*/
#ifndef _B100_REGS_H_
#define _B100_REGS_H_
#include "fx2regs.h"
/*
* Port A (bit addressable):
*/
#define USRP_PA IOA // Port A
#define USRP_PA_OE OEA // Port A direction register
#define USRP_ALTERA_CONFIG USRP_PA // Now on port A, not C
#define bmALTERA_DCLK bmBIT0
#define bmALTERA_NCONFIG bmBIT1
#define bmALTERA_DATA0 bmBIT3
#define bmALTERA_NSTATUS bmBIT4
#define bmALTERA_BITS (bmALTERA_DCLK \
| bmALTERA_NCONFIG \
| bmALTERA_DATA0 \
| bmALTERA_NSTATUS \
)
#define bmPORT_A_OUTPUTS (bmALTERA_DCLK \
| bmALTERA_NCONFIG \
| bmALTERA_DATA0 \
)
#define bmPORT_A_INITIAL 0
#define PORT_A_ADDR 0x80
#define PORT_C_ADDR 0xA0
sbit at PORT_A_ADDR+0 bitALTERA_DCLK; // 0x80 is the bit address of PORT A
sbit at PORT_A_ADDR+1 bitALTERA_NCONFIG;
sbit at PORT_A_ADDR+3 bitALTERA_DATA0;
sbit at PORT_C_ADDR+7 bitALTERA_CONF_DONE;
/* Port B: GPIF FD[7:0] */
/*
* Port C (bit addressable):
* 5:1 FPGA configuration
*/
#define USRP_PC IOC // Port C
#define USRP_PC_OE OEC // Port C direction register
#define bmPC_nRESET 0 //bmBIT0 // reset line to codecs (active low)
#define bmPC_LED0 bmBIT0 // active low
#define bmPC_LED1 bmBIT1 // active low
#define bmPORT_C_OUTPUTS (bmPC_LED0 | bmPC_LED1)
#define bmPORT_C_INITIAL (bmPC_LED0 | bmPC_LED1)
#define USRP_LED_REG USRP_PC
#define bmLED0 bmPC_LED0
#define bmLED1 bmPC_LED1
/* Port D: GPIF FD[15:8] */
/* Port E: not bit addressible */
#define USRP_PE IOE // Port E
#define USRP_PE_OE OEE // Port E direction register
#define bmPORT_E_OUTPUTS (0)
#define bmPORT_E_INITIAL (0)
#endif /* _USRP_REV1_REGS_H_ */
|
