1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
|
/*
* USRP - Universal Software Radio Peripheral
*
* Copyright (C) 2003 Free Software Foundation, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
*/
#include "usrp_common.h"
#include "fpga_load.h"
#include "delay.h"
/*
* setup altera FPGA serial load (PS).
*
* On entry:
* don't care
*
* On exit:
* ALTERA_DCLK = 0
* ALTERA_NCONFIG = 1
* ALTERA_NSTATUS = 1 (input)
*/
unsigned char
fpga_load_begin (void)
{
USRP_ALTERA_CONFIG &= ~bmALTERA_BITS; // clear all bits (NCONFIG low)
udelay (40); // wait 40 us
USRP_ALTERA_CONFIG |= bmALTERA_NCONFIG; // set NCONFIG high
// ready to xfer now
return 1;
}
/*
* clock out the low bit of bits.
*
* On entry:
* ALTERA_DCLK = 0
* ALTERA_NCONFIG = 1
* ALTERA_NSTATUS = 1 (input)
*
* On exit:
* ALTERA_DCLK = 0
* ALTERA_NCONFIG = 1
* ALTERA_NSTATUS = 1 (input)
*/
#if 0
static void
clock_out_config_byte (unsigned char bits)
{
unsigned char i;
// clock out configuration byte, least significant bit first
for (i = 0; i < 8; i++){
bitALTERA_DATA0 = bits & 1;
bitALTERA_DCLK = 1; /* set DCLK to 1 */
bitALTERA_DCLK = 0; /* set DCLK to 0 */
bits = bits >> 1;
}
}
#else
static void
clock_out_config_byte (unsigned char bits) _naked
{
_asm
mov a, dpl
rlc a
mov _bitALTERA_DATA0,c
setb _bitALTERA_DCLK
clr _bitALTERA_DCLK
rlc a
mov _bitALTERA_DATA0,c
setb _bitALTERA_DCLK
clr _bitALTERA_DCLK
rlc a
mov _bitALTERA_DATA0,c
setb _bitALTERA_DCLK
clr _bitALTERA_DCLK
rlc a
mov _bitALTERA_DATA0,c
setb _bitALTERA_DCLK
clr _bitALTERA_DCLK
rlc a
mov _bitALTERA_DATA0,c
setb _bitALTERA_DCLK
clr _bitALTERA_DCLK
rlc a
mov _bitALTERA_DATA0,c
setb _bitALTERA_DCLK
clr _bitALTERA_DCLK
rlc a
mov _bitALTERA_DATA0,c
setb _bitALTERA_DCLK
clr _bitALTERA_DCLK
rlc a
mov _bitALTERA_DATA0,c
setb _bitALTERA_DCLK
clr _bitALTERA_DCLK
ret
_endasm;
}
#endif
static void
clock_out_bytes (unsigned char bytecount,
unsigned char xdata *p)
{
while (bytecount-- > 0)
clock_out_config_byte (*p++);
}
/*
* Transfer block of bytes from packet to FPGA serial configuration port
*
* On entry:
* ALTERA_DCLK = 0
* ALTERA_NCONFIG = 1
* ALTERA_NSTATUS = 1 (input)
*
* On exit:
* ALTERA_DCLK = 0
* ALTERA_NCONFIG = 1
* ALTERA_NSTATUS = 1 (input)
*/
unsigned char
fpga_load_xfer (xdata unsigned char *p, unsigned char bytecount)
{
clock_out_bytes (bytecount, p);
return 1;
}
/*
* check for successful load...
*/
unsigned char
fpga_load_end (void)
{
unsigned char status = USRP_ALTERA_CONFIG;
if (!UC_BOARD_HAS_FPGA) // always true if we don't have FPGA
return 1;
if (bitALTERA_CONF_DONE)
return 1; // everything's cool
// I don't think this should happen. It indicates that
// programming is still in progress.
return 0;
}
|
