| Commit message (Expand) | Author | Age | Files | Lines |
|---|
| * | N210: added makefiles in for rev 4 versions (use LVDS) | Nick Foster | 2011-06-07 | 6 | -4/+204 |
| * | u2p: FPGA internal termination on the clock line from ADC | Matt Ettus | 2011-06-07 | 1 | -2/+2 |
| * | u2p-lvds: remove unused nets | Matt Ettus | 2011-06-07 | 1 | -2/+0 |
| * | builds now | Matt Ettus | 2011-06-07 | 2 | -2/+4 |
| * | first cut at using lvds for adc pins | Matt Ettus | 2011-06-07 | 2 | -2/+3 |
| * | u2p-rebase: go back to versions on next | Matt Ettus | 2011-05-26 | 2 | -5/+4 |
| * | B100: added some packet splitter debug pins, removed debug from GPIO port, sw... | Nick Foster | 2011-05-26 | 5 | -16/+24 |
| * | u1p: reset gpif | Matt Ettus | 2011-05-26 | 2 | -4/+6 |
| * | u1p: connect frames per packet | Matt Ettus | 2011-05-26 | 1 | -1/+1 |
| * | u1p: implement a signal to indicate a partially full usb lut, to flush it | Matt Ettus | 2011-05-26 | 7 | -22/+175 |
| * | u1p: need to declare wires | Matt Ettus | 2011-05-26 | 1 | -0/+1 |
| * | u1p: vita packet generator for testing purposes | Matt Ettus | 2011-05-26 | 4 | -4/+48 |
| * | should split and reframe packets properly | Matt Ettus | 2011-05-26 | 2 | -27/+58 |
| * | u1p: do padding outside of gpif_rd, in packet_splitter | Matt Ettus | 2011-05-26 | 5 | -14/+188 |
| * | u1p: should fix underrun reporting | Matt Ettus | 2011-05-26 | 1 | -1/+1 |
| * | u1p: modify dsp_framer36 to allow it to skip the udp prot eng headers. | Matt Ettus | 2011-05-26 | 1 | -1/+1 |
| * | u1p: add new file to build | Matt Ettus | 2011-05-26 | 1 | -0/+1 |
| * | u1p: modernize, fix warnings, debug pins | Matt Ettus | 2011-05-26 | 1 | -22/+10 |
| * | u1p: debug pins | Matt Ettus | 2011-05-26 | 3 | -6/+9 |
| * | u1p: unused signals | Matt Ettus | 2011-05-26 | 1 | -4/+0 |
| * | u1p: better way of reframing the packets | Matt Ettus | 2011-05-26 | 3 | -5/+83 |
| * | u1p:wr testbench | Matt Ettus | 2011-05-26 | 1 | -0/+86 |
| * | u1p: use 18 bit fifos and use full size of a block ram in the tx path | Matt Ettus | 2011-05-26 | 2 | -13/+19 |
| * | u1p: gpif-to-fx2 path should now handle arbitrary sized packets, up to 2KB | Matt Ettus | 2011-05-26 | 1 | -22/+29 |
| * | u1p: pass tx status/error packets back through GPIF over the response channel... | Matt Ettus | 2011-05-26 | 5 | -18/+106 |
| * | u1p: added loopback and timed capability just like u1e | Matt Ettus | 2011-05-26 | 3 | -28/+111 |
| * | u1p: revert change to address bus width | Matt Ettus | 2011-05-26 | 1 | -2/+2 |
| * | u1p: use icarus verilog to find warnings | Matt Ettus | 2011-05-26 | 2 | -0/+4577 |
| * | u1p: fix bus widths and other warnings | Matt Ettus | 2011-05-26 | 5 | -52/+53 |
| * | u1p: added debug0, debug1 for GPIF debugging | Nick Foster | 2011-05-26 | 1 | -0/+3 |
| * | u1p: add clear ports to gpif, not hooked up yet | Matt Ettus | 2011-05-26 | 1 | -1/+1 |
| * | u1p: remove extram from Makefile | Nick Foster | 2011-05-26 | 1 | -1/+0 |
| * | u1p: catch up with all the recent u1e changes | Matt Ettus | 2011-05-26 | 1 | -107/+91 |
| * | modernize the make files, it now compiles. not tested. | Matt Ettus | 2011-05-26 | 2 | -56/+10 |
| * | select bus is 2 bits wide | Nick Foster | 2011-05-26 | 1 | -1/+1 |
| * | I2C slave address decoding for 16-bit dw instead of 32-bit | Nick Foster | 2011-05-26 | 1 | -1/+1 |
| * | Fixed I2C pin names. | Nick Foster | 2011-05-26 | 1 | -1/+1 |
| * | add padding into gpif response path | Matt Ettus | 2011-05-26 | 3 | -4/+16 |
| * | pad out packets to a minimum length | Matt Ettus | 2011-05-26 | 2 | -1/+76 |
| * | fixed length command packets | Matt Ettus | 2011-05-26 | 1 | -1/+1 |
| * | give response packets the same format as tx packets | Matt Ettus | 2011-05-26 | 1 | -1/+13 |
| * | successful test | Matt Ettus | 2011-05-26 | 1 | -0/+104 |
| * | old and unused | Matt Ettus | 2011-05-26 | 1 | -151/+0 |
| * | put gpio back in | Matt Ettus | 2011-05-26 | 1 | -4/+3 |
| * | fifo to wb should be functionally complete, needs testing | Matt Ettus | 2011-05-26 | 3 | -34/+150 |
| * | not used | Matt Ettus | 2011-05-26 | 1 | -16/+0 |
| * | fix ctrl/resp path to pass all 16 bits of data instead of the bottom bit | Matt Ettus | 2011-05-26 | 3 | -38/+47 |
| * | send reset to the gpif | Matt Ettus | 2011-05-26 | 1 | -2/+3 |
| * | constrain the gpif clock | Matt Ettus | 2011-05-26 | 1 | -0/+3 |
| * | first steps to a command packet handler for u1+ | Matt Ettus | 2011-05-26 | 2 | -0/+17 |
