uhd - Ettus' UHD Repository

	Commit message (Collapse)	Author	Age	Files	Lines
*	watch the ethernet chip select on our debug bus	Matt Ettus	2010-09-23	1	-1/+1
\|
*	fix timing issue on DAC outputs with rev 2. This puts the whole system on a ↵	Matt Ettus	2010-09-21	1	-19/+19
\| \| \| \|	90 degree phase shift
*	updated pins to match rev2, removed dip switch, etc. seems to compile ok.	Matt Ettus	2010-09-09	1	-129/+122
\|
*	vita49 tx and rx added in, all sample rates now at main system clock rate.	Matt Ettus	2010-06-01	1	-25/+25
\|
*	switched passthru of cgen_sen_b to gpio127, made a note of it. No more ↵	Matt Ettus	2010-05-10	1	-1/+1
\| \| \| \|	safe_u1e necessary.
*	added DAC output pins, and a sine wave generator to test them	Matt Ettus	2010-05-04	1	-16/+16
\|
*	changed comment	Matt Ettus	2010-05-04	1	-1/+1
\|
*	Pass previously unused GPIOs to debug pins to help debug interrupts	Matt Ettus	2010-04-24	1	-12/+12
\|
*	added pps and time capability	Matt Ettus	2010-04-15	1	-1/+1
\|
*	connect 2 clock gen controls and 3 status pins to the wishbone so they can ↵	Matt Ettus	2010-03-26	1	-5/+5
\| \| \| \|	be read/controlled from SW
*	connected spi pins, but the spi core still needs to be redone for 16 bit ↵	Matt Ettus	2010-03-25	1	-33/+39
\| \| \| \| \| \|	interfaces Also reconnected GPIOs so you'll need to send commands in order to get debug pins on the GPIOs
*	GPIOs now on the wishbone interface	Matt Ettus	2010-02-22	1	-32/+32
\|
*	Added I2C, UART, debug pins, misc wishbone stuff	Matt Ettus	2010-02-18	1	-19/+19
\|
*	first cut at gpmc <-> wb bridge, split u1e into core, top, and tb	Matt Ettus	2010-02-16	1	-8/+6
\|
*	copied over from safe_u1e	Matt Ettus	2010-02-16	1	-0/+262