aboutsummaryrefslogtreecommitdiffstats
path: root/host
Commit message (Collapse)AuthorAgeFilesLines
...
* nirio: Made new nirio iface code compile with GCCAshish Chaudhari2014-10-103-14/+13
| | | | - Addressed GCC specific errors and warnings
* x300,nirio: Added support for NI-RIO 14.0Ashish Chaudhari2014-10-1023-962/+2487
| | | | | | | | | - Split niriok_proxy interfaces to support NI-RIO <=13.0 and >=14.0 kernel interfaces - Fixed multi-session race conditions by synchronizing niriok_proxy access - Fixed bug switching from NI LV-FPGA access to UHD access by changing how devices are hashed into a reservation table - Fixed calculation of FRAC values for CBX and SBX LO tuning by rounding instead of truncating - Fixed bug that was not setting two MSBs for band select configuration of CBX LO - Submitting on behalf of Patrick Sisterhen, Matthew Crymble
* x300: Reduced the TX buffer from 576K to 520KAshish Chaudhari2014-10-092-2/+2
| | | | | - Trading performance for stability. This helps meet timing at the cost of a shorter processing time window between sends. - Bumped FPGA compat number to 8
* utils: Removed deprecated options from mb eeprom and simple net burner.Martin Braun2014-10-092-29/+10
|
* uhd: Removed deprecated functions from multi_usrpMartin Braun2014-10-091-28/+0
|
* x300: Bugfix#602: X3x0 not found over PCIe with no Eth interfacesAshish Chaudhari2014-10-091-1/+6
| | | | - X3x0 not found over PCIe when only a loopback network interface exists on the host
* cmake: On Apple only, set install name and use rpath correctly, if not ↵Michael Dickens2014-10-091-0/+20
| | | | already set.
* cmake: make sure our local CMake Modules path comes first.Michael Dickens2014-10-091-1/+3
|
* utils: Added latency measurement utilityBalint Seeber2014-10-098-0/+2774
|
* e300: docs: Add notes and links for OpenBTS applicationTom Tsou2014-10-081-0/+13
| | | | | | | | | | | | Push most details out to the OpenBTS wiki rather than the UHD manual itself. The OsmoTRX transceiver - central OpenBTS component relevant to E300-UHD - supports E300 out-of-box. Other modules of OpenBTS require handling due to non-Ubuntu installation rather then anything really E300 specific. Signed-off-by: Tom Tsou <tom@tsou.cc>
* e300: Changed TX/RX switch setting in RX only case to improve isolationJonathon Pendlum2014-10-071-2/+2
|
* e300: Updated documentationMartin Braun2014-10-077-130/+386
|
* uhd: Improved tuning code and corresponding outputs/warningsBen Hilburn2014-10-073-37/+170
| | | | | * Added convenience function for frequency comparisons * ABI change required
* math: Added a new uhd::math namespace + float comparison routinesBen Hilburn2014-10-0712-32/+1114
| | | | | * Float comparison is applied to tuning logic in DSP cores. * Properly using INT_MAX/MIN constants, defined in utils/math.hpp
* uhd: fixed RX and TX DSP cores for 3rd generation productsBen Hilburn2014-10-073-29/+52
|
* uhd: fixing TX DSP tuning on gen2 devices, special changes for n2xxBen Hilburn2014-10-073-33/+55
| | | | This fixes RX DSP core 200 from tuning outside range and causing overflows.
* significant changes to multi_usrp tuning algorithms - changing DSP tuningBen Hilburn2014-10-071-37/+107
|
* Rectifying a great embarassement in UHD. %s/Mhz/MHz.Ben Hilburn2014-10-0710-20/+20
|
* examples: Minor change to tx_waveforms example.Moritz Fischer2014-10-071-3/+3
| | | | Signed-off-by: Moritz Fischer <moritz@ettus.com>
* e300/x300: gpio: Cleaned up example.Moritz Fischer2014-10-071-33/+76
| | | | | | | | | | | | | | | | | | | | * Now accounting for different width of GPIO banks. - for x3x0 use --bits=11 (default) - for e3x0 use --bits=6 * Replaced defines with static const variables. * Lowered default rates from 1Ms/s to 500Ks/s * Added parameter --gpio to allow selecting GPIO bank. - for x3x0 use --gpio="FP0" (default) - for e3x0 use --gpio="INT0" * Renamed e3x0's gpio bank to "INT0" in property tree, as they're not exposed to the outside. Signed-off-by: Moritz Fischer <moritz@ettus.com>
* Initial commit E300 support.Martin Braun2014-10-0742-9/+7558
|
* uhd: Changed format of host/CMakeLists.txt wrt binaries infoMartin Braun2014-10-061-2/+2
|
* uhd: Added infrastructure for maintaining images directoryMartin Braun2014-10-061-3/+6
|
* uhd: uhd_images_downloader now respects $UHD_IMAGES_BASE_URLMartin Braun2014-10-061-115/+126
|
* Merge branch 'maint'Martin Braun2014-10-062-3/+3
|\
| * Updated images archive for Release 3.7.3release_003_007_003Martin Braun2014-10-061-2/+2
| |
| * Updated version string for Release 3.7.3Martin Braun2014-10-061-1/+1
| |
* | b200: Bumped FX3 firmware compat number to 7.Ashish Chaudhari2014-10-011-1/+1
| |
* | Merge branch 'maint'Martin Braun2014-09-301-1/+1
|\|
| * uhd: Switched lock_guards header to locks.hppMartin Braun2014-09-301-1/+1
| |
* | Merge branch 'maint'Martin Braun2014-09-258-55/+177
|\|
| * x300: Reverted back to no analog delay for DAC ref clocksmichael-west2014-09-251-5/+0
| |
| * x300: added reset and resync of ADCs and DACs when changing reference clockmichael-west2014-09-256-54/+166
| |
| * B200: added support for reading the exact product name from EEPROM for B200 ↵Neel Pandeya2014-09-251-0/+15
| | | | | | | | and B210
| * Updated images URL for 3.7.3RC1003_007_003_rc1Martin Braun2014-09-251-3/+2
| |
* | uhd: Added an example for CMake usageMartin Braun2014-09-253-0/+126
| |
* | cmake: set ENV variables to tell GR's FindUHD.cmake that these files were ↵Michael Dickens2014-09-252-0/+13
| | | | | | | | actually used; UHDConfig*.cmake are not always allowed to use CACHE variables, thus the use of ENV.
* | cmake: Add in UHDConfig*.cmake files and install them into CMAKE_MODULES_DIR ↵Michael Dickens2014-09-253-0/+269
| | | | | | | | if provided (default value is "lib${LIB_SUFFIX}/cmake/"). Tested to work with GR's new FindUHD.cmake (as a daisy-chained "find_package(UHD ...)") as well as directly.
* | Merge branch 'maint'Martin Braun2014-09-241-1/+1
|\|
| * docs: Changed Xilinx ISE version from 14.4 to 14.7Ashish Chaudhari2014-09-241-24/+24
| |
* | Merge branch 'maint'Martin Braun2014-09-245-44/+55
|\|
| * x300: Added output sync for DAC reference clocksMartin Braun2014-09-241-0/+1
| |
| * uhd: Fixed logging bug (#476) -- UHD logging has unexplained effect on ↵michael-west2014-09-243-43/+53
| | | | | | | | | | | | | | packet loss. - Removed logging from radio_ctrl_core_3000 - Changed logging facility to prevent type conversion when message is not logged
| * sbx: Fixed logging string (showed TX instead of RX)Martin Braun2014-09-241-1/+1
| |
* | Merge branch 'maint'Martin Braun2014-09-237-9/+34
|\|
| * uhd: Added an operator/ for (fs_path, size_t)Martin Braun2014-09-233-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | This is useful when constructing property tree paths. With this path, the following code would be valid: size_t mb_index = 0; fs_path mb_root = "/mboards"; mb_root = mb_root / mb_index; This is a shortcut for the (in UHD very common) mb_root = mb_root / boost::lexical_cast<std::string(mb_index);
| * usrp: don't print duplicate GPSDO detection messagesNicholas Corgan2014-09-233-6/+1
| |
| * cbx: Fixed LO FRAC truncationMartin Braun2014-09-231-4/+6
| |
* | b200: Set sensible defaults for freq, gain and rate at startupMartin Braun2014-09-022-5/+19
| |
* | ad9361: Made recommended rate a constantMartin Braun2014-09-023-3/+4
| |
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 08:40:02 +0000