aboutsummaryrefslogtreecommitdiffstats
path: root/host
Commit message (Expand)AuthorAgeFilesLines
* USRP2: Separate FPGA compat numbers for USRP2 and N200.michael-west2015-04-232-3/+25
* cmake: Improve usage of C modulesMartin Braun2015-04-203-7/+1
* b200: Boost 1.58-related fixes in B200 IO code.Michael Dickens2015-04-201-2/+2
* utils: added integer, range and double property tree accessorsMarcus Müller2015-04-201-1/+20
* uhd: Fixed missing includeMartin Braun2015-04-201-0/+1
* Updated Images Package for 3.8.3Martin Braun2015-04-201-2/+2
* e300: Added warning for high bandwidth usageMartin Braun2015-04-141-0/+10
* b200: Added warning for high bandwidth usageMartin Braun2015-04-141-0/+10
* ad9361: Removed recommended max clock rate warningMartin Braun2015-04-143-9/+4
* docs: Updated daughterboard informationMarcus Müller2015-04-141-2/+4
* docs: Updated Octoclock documentationMarcus Müller2015-04-141-16/+18
* Updated images package for 3.8.3Ashish Chaudhari2015-04-141-2/+2
* Updated Changelog and version number for 3.8.3Martin Braun2015-04-141-1/+1
* dboards: Fixed type deduction for older compilers on max287x codeMichael West2015-04-141-6/+6
* Updated images package for N210Martin Braun2015-04-101-2/+2
* Increase command FIFO depth of N2x0 and X3x0 to 64.michael-west2015-04-103-4/+4
* UBX Phase Synchronization Supportmichael-west2015-04-101-64/+187
* X300: Change dboard clock rate to 50 MHzmichael-west2015-04-104-345/+480
* Fix for BUG #683: UHD: Need to factor out MAX287x code for UBX and CBXmichael-west2015-04-104-714/+918
* usrp1: codec_ctrl: Fix compiler warning.Moritz Fischer2015-04-101-1/+1
* Fixed B2x0 doc, man pagesMarcus Müller2015-04-093-5/+36
* e300: remote_codec_ctrl: Fixed typo in error messageMoritz Fischer2015-04-081-1/+1
* B200: Change Catalina Reg 0x06 for RX data setup/hold timing issue @ 30.72MHz...Ian Buckley2015-04-061-1/+1
* e100: Support command time access through dboard_iface.michael-west2015-04-032-6/+6
* uhd: Add ability to get and set command time through dboard_iface.michael-west2015-04-0320-32/+152
* docs: e3x0: Add a paragraph on writing the sdcard.Moritz Fischer2015-03-301-9/+17
* x300: Fix for Bug #714: Phase wobble across four channels on two devicesNeel Pandeya2015-03-301-1/+1
* db_tvrx2: fixed boost::format bugMarcus Müller2015-03-301-1/+1
* usrp1: fixed check for loaded firmwareNicholas Corgan2015-03-271-2/+3
* Warning fixesNicholas Corgan2015-03-2741-129/+143
* doxygen: ignore NI-RIO filesNicholas Corgan2015-03-241-1/+2
* imgs_downloader: Copy pkg to temp dir even if it is localAshish Chaudhari2015-03-181-3/+4
* b200: Updated hashing algorithm for platform consistencydcaswell2015-03-161-3/+5
* b200: Fixed var name typoMartin Braun2015-03-131-1/+1
* docs: Moved IMU image to correct locationMartin Braun2015-03-121-0/+0
* e300: Fix missing namespace prefixes.Moritz Fischer2015-03-123-6/+6
* uhd: Fixed several type-cast related warnings for naggy compilersMartin Braun2015-03-1110-49/+49
* uhd: Fixed multiple compiler warnings (unused variables, missing literal f)Martin Braun2015-03-117-13/+13
* uhd: Fixed some punctuation-related compiler warningsMartin Braun2015-03-113-9/+9
* b200: Initialize _tick_rate properly to force tick rate updateMartin Braun2015-03-111-1/+2
* docs: Added E3x0 IMU imageMartin Braun2015-03-111-0/+0
* cmake: Skip building fx3 utils if B200 is disabledMartin Braun2015-03-101-6/+11
* e300: comment out unused variables in control::make when E300_NATIVE is not d...Michael Dickens2015-03-091-1/+1
* cmake: for APPLE only, fix default values for CMAKE_INSTALL_NAME_DIR and CMAK...Michael Dickens2015-03-091-2/+2
* cmake: restored compatibility with CMake 2.6Nicholas Corgan2015-03-053-1/+139
* N2x0: Fixed missing usage of send_buff_sizeMartin Braun2015-03-033-3/+6
* uhd: Fixed: Exception during detection kills device::makeMarcus Müller2015-03-032-10/+17
* e300: fc: Clean up the TX flowcontrol setup a bit.Moritz Fischer2015-02-262-1/+8
* e300: fc: This should fix the RX flow control.Moritz Fischer2015-02-262-7/+34
* docs: updated libusb and static lib infoNicholas Corgan2015-02-211-3/+3