aboutsummaryrefslogtreecommitdiffstats
path: root/host
Commit message (Collapse)AuthorAgeFilesLines
* Fix lib64 detection for cross builds.Philip Balister2016-08-041-0/+4
| | | | | | | OpenEmbedded sets CMAKE_INSTALL_LIBDIR so we can directly detect if the target wants to install uhd in the lib64 directory. Signed-off-by: Philip Balister <philip@opensdr.com>
* examples: test_dboard_coercion did not check the correct LO lock sensors for RXMartin Braun2016-08-031-9/+9
|
* cmake: "make uninstall" now removes symlinks (CMake 2.8.1 and above)Nicholas Corgan2016-08-011-0/+11
|
* WBX: Make frequencies <100 MHz work for v2 and v3 boards when reference ↵michael-west2016-08-012-16/+22
| | | | clock <100 MHz (i.e. on X300)
* usrp_e3x0.dox: Example cmake line should enable GPSD for E310. (#1170)Philip Balister2016-07-271-1/+1
| | | Signed-off-by: Philip Balister <philip@opensdr.com>
* docs: added UBX to list of calibratable daughterboardsMarcus Müller2016-07-181-0/+1
|
* Octoclock: Fixed issues related to missing strings from GPSDO.michael-west2016-06-282-13/+26
| | | | | - Corrected case when num_wraps overflowed - Added limit to cache age
* Octoclock: Fix firmware version compatibilitymichael-west2016-06-279-38/+44
|
* converters: Clarifying comment re packingMartin Braun2016-06-222-0/+10
|
* docs: Clarified available clock rates for X310 (should not list 120 MHz)Derek Kozel2016-06-221-1/+1
| | | | Reviewed-By: Martin Braun <martin.braun@ettus.com>
* Added subdev argument to rx_samples_to_udp exampleDerek Kozel2016-06-221-0/+5
|
* b200: Update DSPs after changing tick rateMartin Braun2016-06-223-6/+32
| | | | | Reviewed-By: Andrew Lynch <andrew.lynch@ni.com> Reviewed-By: Michael West <michael.west@ettus.com>
* lib: fixed GCC 6 warnings/errorsNicholas Corgan2016-06-212-6/+16
| | | | | * gpsd_iface: fixed ambiguity in boost::assign::list_of usage * b100/clock_ctrl: fixed "misleading indentation" warning
* Added the option to disable ADC self-testMarcus Müller2016-06-171-1/+1
| | | | | | This proved helpful on devices where the EEPROM is wrong about hardware revision, and the EEPROM writing doesn't work, because the ADC self-test fails due to being run for the wrong board revision.
* octoclock: bugfixes, bumped firmware compat number to 4Nicholas Corgan2016-06-176-32/+62
| | | | | | | | | * host: consistency in setting packet sequence numbers * firmware: populate packet length field when setting GPSDO cache * both: logic for dealing with mismatching compatibility numbers Reviewed-By: Michael West <michael.west@ettus.com> Reviewed-By: Martin Braun <martin.braun@ettus.com>
* convert: remove duplicate registration of sc12 sizeNicholas Corgan2016-06-171-2/+1
|
* Octoclock: Fix off by one errors in uart codemichael-west2016-06-161-2/+2
|
* cmake: allow UHD library and utilities to be in separate lib directoriesNicholas Corgan2016-06-161-1/+8
|
* query_gpsdo_sensors: added OctoClock-G supportNicholas Corgan2016-06-161-0/+39
|
* Fixed minor warningsNicholas Corgan2016-06-166-12/+13
| | | | | | * Mismatched printf format strings * Number truncation * Unreferenced variables
* octoclock: uhd_usrp_probe works for clocks nowMartin Braun2016-06-151-14/+25
|
* docs: no HTML timestamp for DoxygenNicholas Corgan2016-06-141-1/+1
|
* Spelling fixesNicholas Corgan2016-06-142-8/+8
|
* config: better platform detectionNicholas Corgan2016-06-142-6/+6
|
* Fix off-by-one errorJonathan Wakely2016-06-071-1/+1
| | | | There's an off-by-one error in base64_decode_value that results in undefined behaviour when it's passed `'\x7b'`
* octoclock: Fix multi-line #define statementsMarcus Müller2016-06-061-8/+10
| | | | | | | | | | | | | | | | | | | | Now, use `do{...} while(0)` to pack multiple statements into a single one that isn't fragile. Currently ``` if(state_just_right) OCTOCLOCK_SEND_AND_RECV(all,the,options); ``` would introduce annoying bugs. Generally, there's no good reason this is a `#define` rather than a C/C++ function. The `OCTOCLOCK_PACKET_MATCHES` should probably be a C function, too, or simply an overloaded `==` operator on to `const octoclock_packet_t&`.
* UBX: Force RX LNAs on to reduce RX settling timemichael-west2016-05-261-7/+26
|
* UBX: Fixed noise issues and reduced power consumption and heatmichael-west2016-05-261-23/+37
| | | | | - Removed force on of components to reduce noise, power consumption, and heat - Set TX PA force on only when RX antenna set to RX2 to remove long TX transient caused by HW issue on TX path
* bugfix#1102: Prevented X300 DAC FIFO from underflowingAshish Chaudhari2016-05-253-15/+4
| | | | | | | - The spectral distortion was begin caused by the DAC FIFO underflowing. The fix was to run through the DAC sync procedure which uses the falling edge clock to sample the RefClk and sync it with the data clk
* cmake: When git describe fails, just use defaults instead of printing warnings.Martin Braun2016-05-251-2/+13
|
* cmake: Better verbosity for installing/packaging images.Martin Braun2016-05-191-1/+2
|
* examples: Increased the reference locking timeout in benchmark_ratePaul David2016-05-171-2/+3
|
* debian: Updated postinst such that sysctl failures are non-fatal to installationMartin Braun2016-05-111-1/+1
|
* doxygen/cmake: Allow Doxygen to use shorter filenamesMartin Braun2016-05-052-1/+7
| | | | | This fixes cases where automatic builds fail on operating systems with character limits in paths, such as Windows.
* Final changes for 3.9.4 release:Martin Braun2016-05-052-2/+17
| | | | | - Updated UHD images packages (zip file name change) - Updated Debian changelog
* b200: Changed implicit conversion to explicit conversion for wptrAndrew Lynch2016-05-051-2/+2
|
* b200: Changed tree sptr in lambda to wptrAndrew Lynch2016-05-041-2/+6
|
* docs: Update E310 documentation.Philip Balister2016-04-281-6/+30
| | | | | | | Provide some more background on when you need to cross compile UHD and install it on the E310. Clarify image build process. Signed-off-by: Philip Balister <philip@opensdr.com>
* Updated images package for UHD 3.9.4 RC1Ashish Chaudhari2016-04-261-2/+2
|
* Preparing maint branch for 3.9.4-RC1Martin Braun2016-04-221-1/+1
| | | | | | | | | - Updated changelog - Updated submodule pointer - Updated version Note: Image package was not updated for RC1 because it's unchanged from 3.9.3.
* b200: Fixed setting of max rateMartin Braun2016-04-222-10/+18
| | | | | | | DSP rates are now being tracked as in whether or not they've been set. We can disregard unset DSPs for the automatic clock rate calculation. Reviewed-By: Derek Kozel <derek.kozel@ettus.com>
* math: Fixed floating point comparison for custom deltaMartin Braun2016-04-222-1/+9
| | | | Reviewed-By: Derek Kozel <derek.kozel@ettus.com>
* e3xx: spi: Fix issue introduced in 1b149f56Moritz Fischer2016-04-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kernels (3.15+) introduce the possibility to do DUAL and QUAD spi operations via spidev. Prior to this commit nothing was setting the {tx,rx}_nbits members of the struct spi_ioc_transfer. from include/uapi/linux/spi/spidev.h struct spi_ioc_transfer { __u64 tx_buf; __u64 rx_buf; __u32 len; __u32 speed_hz; __u16 delay_usecs; __u8 bits_per_word; __u8 cs_change; __u8 tx_nbits; __u8 rx_nbits; __u16 pad; }; This turns into an issue on more recent kernels, where it turns all transactions into QUAD transactions, while the controller actually doesn't support that mode of operation. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
* docs: Fixed apt-get command for launchpad debsMartin Braun2016-04-141-1/+1
|
* cmake: Enable use of dot for DoxygenMartin Braun2016-04-072-1/+8
|
* gpio core: Fixed a mismatch in the address assignment for RX and full duplexPaul David2016-04-061-2/+2
|
* Fixed spelling errors, mostly in documentationDerek Kozel2016-04-0619-30/+30
|
* cmake: Removed setting of CPACK_SET_DESTDIRMartin Braun2016-04-061-3/+0
|
* Updated URL for USRP image filesDerek Kozel2016-03-291-2/+1
| | | | | Previously there were separate maint and master images. Since 3.8.1 these have been combined at a new URL.
* ubx: Changed member declaration to satisfy debug builds on WindowsMartin Braun2016-03-291-1/+1
|
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 11:55:01 +0000