uhd - Ettus' UHD Repository

	Commit message (Expand)	Author	Age	Files	Lines
*	uhd: replace managed buffer shared pointer w/ intrusive pointer to reduce ove...	Josh Blum	2011-05-14	2	-25/+6
*	usrp1: correct TX codec rate, it should also read 64e6 when probed	Josh Blum	2011-05-14	2	-17/+11
*	usrp1: apply conditional disables/enables to rx and tx	Josh Blum	2011-05-14	7	-9/+60
*	Merge branch 'tvrx2'	Josh Blum	2011-05-13	2	-0/+1912
\|\
\| *	Added TVRX2 support	Jason Abele	2011-05-13	2	-0/+1912
* \|	usrp-e100: use misc test32 register to store fpga hash	Josh Blum	2011-05-10	1	-36/+34
\|/
*	usrp-e100: created device address arg for master clock rate, removed eeprom hack	Josh Blum	2011-05-12	5	-53/+13
*	usrp-e100: added soft sync for ad9522 clock control	Josh Blum	2011-05-09	1	-2/+12
*	usrp_e100: work w/ ad9522 clock configuration	Josh Blum	2011-05-08	1	-2/+18
*	usrp1: overload read_eeprom to handle multi-byte reads	Josh Blum	2011-05-05	2	-1/+11
*	usrp1: added more logging to usrp1 iface for debugging	Josh Blum	2011-05-05	1	-0/+20
*	uhd: various tweaks to log and msg, replaced a few remaining stdio	Josh Blum	2011-05-04	4	-1/+4
*	uhd: removed more iostream stuff from usrp* implementations	Josh Blum	2011-05-04	16	-108/+99
*	usrp-e100: removed stdio prints from implementation	Josh Blum	2011-05-04	7	-80/+86
*	uhd: replaced warning post with calls to UHD_MSG(warning)	Josh Blum	2011-05-04	14	-90/+55
*	uhd: replaced many conditional prints with UHD_LOG usage	Josh Blum	2011-05-04	2	-13/+11
*	usrp: replaced conditional dboard debug prints w/ UHD_LOGV(often)	Josh Blum	2011-05-04	8	-83/+68
*	usrp2: added REF_MIMO and PPS_MIMO for USRP2 clock config	Josh Blum	2011-05-03	1	-15/+23
*	Added RSSI sensor for RFX series (not rfx400)	Jason Abele	2011-05-02	1	-6/+29
*	usrp1: toggle the FPGA reset and RX reset registers at init	Josh Blum	2011-05-01	1	-8/+18
*	usrp-e100: shrink name field to git mcr into eeprom	Josh Blum	2011-04-20	1	-2/+3
*	USRP1: added support for setting clock rate from EEPROM	Josh Blum	2011-05-01	4	-8/+56
*	usrp-e100: add ability to set/get default master clock rate from EEPROM	Josh Blum	2011-05-01	3	-1/+47
*	uhd: fixed typo in tune request/result inter_freq -> rf_freq	Josh Blum	2011-05-01	1	-13/+13
*	usrp2: use default mtu as upper limit unless user specifies	Josh Blum	2011-04-30	1	-11/+12
*	usrp2: allow devices to be discovered when usrp2_iface::make throws	Josh Blum	2011-04-29	1	-12/+16
*	usrp2: added support for GPSDO configuration bits in EEPROM	Josh Blum	2011-04-29	2	-5/+38
*	GPS parser fixes for get_time.	Nick Foster	2011-04-29	2	-7/+5
*	USRP2: enable GPS by default	Nick Foster	2011-04-29	1	-3/+3
*	USRP2: Added GPS time support to the sensors interface. gps_time sensor retur...	Nick Foster	2011-04-29	2	-1/+9
*	N210: implemented mboard sensors for ref lock and MIMO lock	Nick Foster	2011-04-29	4	-1/+28
*	dbsrx: implement SUBDEV_PROP_ANTENNA to give users a better error	Josh Blum	2011-04-28	1	-1/+5
*	usrp_e100: added recv/send_frame_size xport args	Josh Blum	2011-04-16	3	-11/+23
*	rfx: reverted change, now prefer R divider to clock divider	Josh Blum	2011-04-16	1	-22/+17
*	usrp1: fix for tx under remainder conditions	Josh Blum	2011-04-27	1	-3/+3
*	usrp1: the rx mux was reversed (fixed multi-channel rx)	Josh Blum	2011-04-27	1	-1/+1
*	Merge branch 'gdb_support'	Josh Blum	2011-04-26	12	-278/+592
\|\
\| *	Enhance WBX IQ balance performance through LO drive	Josh Blum	2011-04-26	1	-0/+29
\| *	wbx: split wbx into daughterboard and granddaughterboard implementation	Josh Blum	2011-04-26	4	-196/+398
\| *	usrp: support for grand daughter board eeprom	Josh Blum	2011-04-26	6	-6/+41
\| *	usrp: work on dboard_manager to register an ID for multiple xcvr combinations	Josh Blum	2011-04-26	1	-75/+123
* \|	Merge branch 'sbx-adi'	Josh Blum	2011-04-26	2	-0/+794
\|\ \
\| * \|	Handle antenna switching and LEDs	Jason Abele	2011-04-23	1	-36/+120
\| * \|	SBX enable LO LPF at 1.5GHz	Jason Abele	2011-04-23	1	-12/+31
\| * \|	Makes 2nd SBX proto work	Jason Abele	2011-04-23	1	-32/+47
\| * \|	Updating SBX to latest UHD	Jason Abele	2011-04-23	1	-15/+47
\| * \|	Capture characterization changes	Jason Abele	2011-04-23	1	-6/+6
\| * \|	Initial SBX-ADI driver	Jason Abele	2011-04-23	2	-0/+644
\| \|/
* /	xcvr2450: initialize the max_power variable	Josh Blum	2011-04-26	1	-1/+1
\|/
*	uhd: move thread loop condition flag to before barrier (prevents race condition)	Josh Blum	2011-04-22	2	-2/+2