aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib/usrp
Commit message (Expand)AuthorAgeFilesLines
* twinrx: add reimport to LO options on property treeMark Meserve2017-06-151-1/+1
* twinrx: add reimport lo modeMark Meserve2017-06-153-16/+21
* device3: Improved busy loop for tx flow control polling on slower machinesPatrick Sisterhen2017-05-081-2/+28
* rfnoc: Update DDC and DUC command tick rateMartin Braun2017-04-131-1/+1
* rfnoc: Add set_command_time hook to radio blockDerek Kozel2017-04-132-0/+5
* UHD: Fix get_normalized_tx_gain in multi_usrpDerek Kozel2017-04-091-1/+1
* X300: Increase FW control ACK timeoutMichael West2017-04-051-1/+1
* X300: Change default frame sizes for PCIe to be page aligned for betterMichael West2017-04-052-13/+16
* Device3: Improved send flow controlmichael-west2017-04-051-24/+44
* max2871: fix for not writing register 0 when requiredMark Meserve2017-03-211-0/+6
* x300: Put back runtime error on FPGA compat mismatchMartin Braun2017-03-151-5/+1
* x300: Removed MTU throttling for Ethernet connectionsMartin Braun2017-03-081-1/+1
* C API: Implement set_time_source_out and fix typoHendrik Vogt2017-02-271-1/+11
* Fix max values for MOD2 and FRAC2Mark Meserve2017-02-201-2/+2
* Revise calculation of ADF5355 FRAC2 registerMark Meserve2017-02-201-7/+4
* C API: Added missing fields to USRP infoMartin Braun2017-02-201-0/+2
* uhd: Fix C API LO controlsMartin Braun2017-02-201-4/+4
* cores: unhide virtual overloaded functions in gpio_atr_3000Andrej Rode2017-02-201-0/+4
* UBX: Add UHD_SAFE_CALL for MAX287x dectructor to prevent terminatemichael-west2017-02-161-1/+5
* GPSDO: Improved detectionmichael-west2017-02-011-7/+17
* x300: only remove existing items from zpu_iface_registry in destructorAndrej Rode2017-02-011-1/+3
* Moved default register values into ic_reg_mapDerek Kozel2017-01-302-32/+15
* GPS: Improvements to query_gpsdo_sensormichael-west2017-01-301-5/+5
* device3: Reset sequence number in get_tx_streamer()Jonathon Pendlum2017-01-301-0/+1
* x300: Increase PCIe TX frame size to 8184Jonathon Pendlum2017-01-261-4/+1
* X300: Move property tree check to subscriberDerek Kozel2017-01-261-5/+6
* X300: Fix issue with GPSDO sometimes not being recognized properlymichael-west2017-01-261-10/+23
* X300: Added code to handle case where older firmware was slow to release the ...michael-west2017-01-261-6/+25
* lib: add default ctors to structs and initialize members properlyAndrej Rode2017-01-124-4/+19
* lib: remove statements after throwAndrej Rode2017-01-123-3/+1
* ad9361: assign before throwAndrej Rode2017-01-121-1/+1
* n230: fix coverity reportsAndrej Rode2017-01-121-1/+2
* usrp2: fixes according to coverity reportsAndrej Rode2017-01-123-3/+3
* docs: Purged references to CVITA, replaced with CHDRMartin Braun2017-01-111-1/+1
* X300: Prevent MB EEPROM Corruptionmichael-west2017-01-108-49/+387
* x300: Made MTU throttling more explicit in x300 header filesMartin Braun2016-12-132-1/+3
* Fix typo causing channel list generation to fail.michael-west2016-12-131-1/+1
* X300: dont stop x300_find if receiving wrong flagsAndrej Rode2016-12-081-2/+2
* x300: Make PCIe muxing and connection multi-usrp capableMartin Braun2016-12-082-15/+19
* x300: Adding warning for sampling rate coercionMartin Braun2016-12-061-2/+7
* UBX: Force on RX driver to eliminate transientmichael-west2016-12-011-1/+1
* rfnoc: legacy_compat gets its own set_{rx,tx}_rate() callsMartin Braun2016-11-291-0/+24
* device3: Backed-out the alignment adaptionMartin Braun2016-11-291-6/+0
* lib: Removed more superfluous variablesMartin Braun2016-11-284-10/+8
* usrp2: Removed superfluous helper functionMartin Braun2016-11-281-4/+0
* b100: Removed superfluous FX2 vid/pidMartin Braun2016-11-282-4/+0
* dma fifo: Removed superfluous attributeMartin Braun2016-11-281-2/+1
* n230: Make second dual-eth addr consistent with standardAshish Chaudhari2016-11-141-2/+2
* Remove all boost:: namespace prefix for uint32_t, int32_t etc. (fixed-width t...Martin Braun2016-11-08173-2285/+2286
* X300: Fix for channel 1 failure to ACK a TX burst.michael-west2016-11-071-24/+60