aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib/usrp
Commit message (Expand)AuthorAgeFilesLines
* uhd: lots of work releated to streamer work and usrp2 implementationJosh Blum2011-11-033-145/+172
* basic/lf: keep dboard clocks disabled (should be by default)Josh Blum2011-10-271-2/+2
* b100: perform test claim on usb before continuingJosh Blum2011-10-241-14/+7
* b100/e100: additional constraints for clock rate configurationJosh Blum2011-10-182-0/+6
* Fix for unitialized eepromJason Abele2011-10-121-1/+3
* b100: new eeprom map for special 9 byte serialJosh Blum2011-10-122-28/+69
* b100: add reference lock sensorJosh Blum2011-10-104-2/+19
* usrp: added product and revision fields to eepromJosh Blum2011-10-102-36/+80
* usrp: added revision field to the dboard id classJosh Blum2011-10-101-2/+19
* B100/USRP1: pass in VID/PID from args string so you can specify where to look...Nick Foster2011-10-102-4/+20
* Bumping the B100 PID to 0x0002, at Josh's direction.Ben Hilburn2011-10-101-1/+1
* e100: codec control register fix for txJosh Blum2011-10-061-1/+1
* gen2: fixed rate calculation when > 128Josh Blum2011-10-042-2/+6
* usrp2: give users a warning for gpsdo support + fw updateJosh Blum2011-09-281-0/+7
* usrp2: remove old pre-release warningJosh Blum2011-09-281-10/+0
* usrp2: allow backwards compat with previous fwJosh Blum2011-09-281-1/+1
* e100: tweak for codec params for slight improvementJosh Blum2011-09-281-4/+12
* e100: gps talking -> termios magic fooJosh Blum2011-09-281-9/+7
* e100: gps uart deal with cr and nlJosh Blum2011-09-282-10/+5
* e100: added support for internal gpsdoJosh Blum2011-09-284-0/+107
* gps: use absolute timeout for communicationJosh Blum2011-09-281-6/+6
* usrp2: uart/udp work in host and fw, workingJosh Blum2011-09-286-93/+32
* ZPU/USRP2: first stab at UDP UART firmwareNick Foster2011-09-281-0/+1
* e100: added ref locked sensor for clock referenceJosh Blum2011-09-284-2/+22
* e100: added support for r4 differential clockingJosh Blum2011-09-283-13/+36
* B100: unshadow dboard clock rates so you can set master freq after init and s...Nick Foster2011-09-233-7/+21
* Make unknown db complain usefully about antenna selectionJason Abele2011-09-211-4/+4
* B100: LVDS clocking on db outputsNick Foster2011-09-201-8/+4
* usrp1: disable pad to one for usrp1 (not needed)Josh Blum2011-09-191-0/+1
* b100: order of deconstruction, kill marauder firstJosh Blum2011-09-191-0/+5
* usb: added interface args to usb abstractionsJosh Blum2011-09-192-12/+12
* usrp: also use the new API to get the property tree in multi-usrpJosh Blum2011-09-141-1/+1
* usrp: fix string mapping for PPS_NEG clock configJosh Blum2011-09-141-1/+1
* usrp: remove wax::obj entry point (not used)Josh Blum2011-09-084-12/+0
* usrp: fix check for max stream_cmd.num_samps, upper 4 bits reservedJosh Blum2011-09-081-1/+1
* USRP2: don't populate GPS sensors if no GPSDO found. Fixes bug #614.Nick Foster2011-09-081-4/+6
* wbx: fix bug in wbxv3 tx gain readback calculationJosh Blum2011-09-081-1/+1
* e100: fix FPGA filename lookup, and use model string for nameJosh Blum2011-09-031-2/+2
* usrp1: reset control objects in this order to avoid race conditionsJosh Blum2011-09-021-1/+3
* e100: use model string to determine FPGA image to support E110Josh Blum2011-09-012-4/+14
* xcvr2450: fix the locking at marginal frequenciesJosh Blum2011-09-011-0/+11
* e100: changed compat numbers, and tweaksJosh Blum2011-08-313-5/+7
* e100: changes to support bus workJosh Blum2011-08-311-1/+1
* B100: don't reset send buffers (screws up TX)Nick Foster2011-08-311-1/+0
* Merge branch 'patch_release'Josh Blum2011-08-311-5/+9
|\
| * usrp2: made iface deconstructor safe (unlock can throw)release_003_002_003Josh Blum2011-08-311-2/+3
| * usrp2: manually deconstruct tasks, fixes cleanup bugJosh Blum2011-08-291-0/+5
| * usrp: preserve sub-ranges when calculating overall tune rangeJosh Blum2011-08-291-5/+9
* | usrp2: made iface deconstructor safe (unlock can throw)Josh Blum2011-08-311-2/+3
* | usrp2: manually deconstruct tasks, fixes cleanup bugJosh Blum2011-08-251-0/+5